Search NASA⌕ Search

SEARCH · Search NASA

Results for “Padding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Lunar Base Construction Overview

Previous lunar missions and campaigns have been restricted to using robotic landers and lunar orbiting satellites as well as sortie type of operations using astronaut crews (NASA Apollo program). The next phase of lunar exploration has begun under NASA’s Artemis program and there has been an international response where other nations such as China, Russia, India, Canada, Japan and the European Union of nations, have all expressed interest in either collaborating or competing with NASA on the Moon. This next phase has an over arching goal of achieving a permanent human presence on the Moon via sustainable methods. A lunar base with human occupancy will require infrastructure to provide shelter, utilities, landing/launch pads, roads, communications, power and all the other necessities to sustain human life and protect equipment. Since human biology is not well suited for surviving in the lunar environment, there will be many forms of automated equipment, autonomy and robotic helpers that will minimize the amount of Extra-Vehicular Activity (EVA) required by the crew. This will mean that the radiation dosage received by the crew will stay within acceptable and safe career doses. The required infrastructure must be constructed, but the mass and logistics of bringing all the construction materials from Earth are prohibitive, which makes the necessary construction difficult to achieve. In-Situ Resource Utilization (ISRU) aims to solve this challenge by sourcing construction materials locally or “in-situ”. This means that their transportation can be completely eliminated, resulting in large cost savings by avoiding the launch out of Earth’s deep gravity well and subsequent trans lunar injection, lunar orbit capture and landing. This paper will give an overview of the required construction tasks and related equipment that will be required to robotically build a lunar base using in-situ resources. It will also organize these tasks into logical groupings so that technology development and implementation can be pursued within a framework that can be referenced by all involved.

Construction↗

Progress Towards Prolonged Deployment of SiC JFET-R ICs Into Previously Inaccessible Hostile Environments

This invited presentation describes demonstration of semiconductor integrated circuits (ICs) and ceramic packaging that are arguably the most environmentally durable transistor electronics ever demonstrated. SiC junction field effect transistor-resistor (JFET-R) ICs with two-level interconnect have successfully operated for over 1 year in 500 °C air-ambient [1], 60 days in 460 °C and 9.3 MPa pressure caustic Venus surface environment test chamber [2], and radiation exposure through 7 Mrad(Si) total ionizing dose (TID) and 86 MeV-cm2/mg heavy ion strikes [3]. Furthermore, these ICs have also demonstrated operation from -190 °C to +812 °C (over 1000 °C T-span) without significant change in signal (input /output) or power supply voltages [4]. With modest adjustments, the SiC JFET-R fabrication process is compatible with semiconductor mass-production tools and materials. As an initial step towards this end, the processing that forms the SiC JFETs and resistors (without interconnect) for the NASA Glenn “Generation 12” design prototype JFET-R ICs was conducted at GE Research. Once the COVID-delayed IC interconnect and bond pad fabrication processing on these wafers is completed at NASA Glenn, the resulting chips will be packaged and oven-tested [5]. It is expected that further technology transfer to complete commercial production will lower investment and risk barriers to useful application deployment. For NASA, an initial high-value deployment is opening the Venus surface to extended missions for robotic scientific exploration.

Silicon Carbide↗

Methodology and Development of SLS Liftoff Loads

The methodologies and development of the loads experienced during liftoff of the NASA SLS Block I vehicle will be presented in this paper. The liftoff loads analysis traditionally captures the dynamics of vehicle/pad separation after engine/booster ignition coupled with other launch day environments like wind, overpressure, and engine side loads. Additionally, the liftoff analysis includes an on-pad engine shutdown prior to booster ignition. The SLS liftoff analysis is performed using a Monte Carlo analysis and this paper will explore the Monte Carlo process and the statistical approach to calculating the limit loads.

SLS↗

A Convolutional Neural Network for Enhancement of Multi-Scale Localization in Granular Metallic Representative Unit Cells

A convolutional neural network was used to enhance the localization of strain and stress for a generalized method of cells model of a metallic microstructure. Enhanced shear strains, measured in terms of the linear regression coefficients as a function of ground truth strains, were improved from inaccurate and uncorrelated (slope=0.003, Rsq=0.000) to accurate and well correlated (slope=0.890, Rsq=0.882) relative to ground truth (slope=1.0, Rsq=1.0). In applying the convolutional neural network, a convolutional stride of 1.0 (padding=’same’) was only modestly effective while strides of 2 or 3 were more effective yet at higher cost. Additional convolutional layers were generally more expensive than additional dense layers, often with limited benefit. The accuracy of enhanced localized shear strains and stress is expected to yield benefits for damage progression models, especially in the context of hierarchical multi-scale methods where the generalized method of cells is applied at the intermediate scale.

Machine Learning↗

Vitrolube NPI-1220 Solid Lubricant Performance After Ultraviolet and Salt Fog Test Exposures

Vitrolube NPI-1220 is a ceramic-bonded solid lubricant produced by National Process Industries, Inc. (NPI) that uses molybdenum disulfide (MoS2) and graphite as lubricating pigments. It is applied to many space flight components, including nickel-alloy and stainless-steel components. Various applications, such as the powered nut and bolt assemblies in the international space station (ISS) (Illi, 1999), the Space Launch System (SLS) sliding bellows, and the SLS ball strut tie-rod assembly (BSTRA) use Vitrolube. No engineering data exists regarding possible Vitrolube degradation after extended exposure to coastal environments encountered by flight hardware on test stands or launch pads. Such environments include ultraviolet (UV) ray, high humidity, and salt exposures. In this study, nickel-alloy disks coated with Vitrolube by NPI, are exposed to controlled UV ray and ‘salt fog’ environments in facilities at Marshall Space Flight Center (MSFC). The exposed disks are run in tribological pin-on-disk tests to quantify any difference in coating lubricity and/or wear compared to coated disks that were not exposed to those environments.

Tribology↗

Lunar Base Construction Overview

Previous lunar missions and campaigns have been restricted to using robotic landers and lunar orbiting satellites as well as sortie type of operations using astronaut crews (NASA Apollo program). Now, the next phase of lunar exploration has begun under NASA’s Artemis program and there has been an international response where other nations such as China, Russia, India, Canada, Japan and the European Union of nations, have all expressed interest in either collaborating or competing with NASA on the Moon. This next phase has an over arching goal of achieving a permanent human presence on the Moon via sustainable methods. A lunar base with human occupancy will require infrastructure to provide shelter, utilities, landing/launch pads, roads, communications, power and all the other necessities to sustain human life and protect equipment. Since human biology is not well suited for surviving in the lunar environment, there will be many forms of automated equipment, autonomy and robotic helpers that will minimize the amount of Extra-Vehicular Activity (EVA) required by the crew. This will mean that the radiation dosage received by the crew will stay within acceptable and safe career doses. Radiation shielding via the use of regolith can also mitigate radiation dangers. The required infrastructure must be constructed, but the mass and logistics of bringing all the construction materials from Earth are prohibitive, which makes the necessary construction difficult to achieve. In-Situ Resource Utilization (ISRU) aims to solve this challenge by sourcing construction materials locally or “in-situ”. This means that their transportation can be completely eliminated, resulting in large cost savings by avoiding the launch out of Earth’s deep gravity well and subsequent trans lunar injection, lunar orbit capture and landing. This paper will give an overview of the required construction tasks and related equipment that will be required to robotically build a lunar base using in-situ resources. It will also organize these tasks into logical groupings so that technology development and implementation can be pursued within a framework that can be referenced by all involved.

Lunar Base↗

Space Needle Returns

STEP is imported into Engineering Sketch Pad. Some bodies where slightly scaled and translated in OpenCSM to create a manifold solid for the downstream meshing process. The braces at the base and columns around the core are omitted because their solids are malformed or created nonmanifold intersections. EGADS provides an initial tessellation of the surface. refine adapted the surface mesh to a curvature and feature size metric. TetGen initially filled the volume. The TetGen mesh is adapted to the Spalding Law of the Wall u+ with refine to provide the initial mesh for flow solution. Solution-based mesh adaptation is performed where FUN3D-FV computes the flow solution with the Reynolds-averaged Navier-Stokes equations coupled to the Spalart-Allmaras turbulence model. The freestream Mach number is 4 approaching 40° from the central axis of the Space Needle. The volume and surface mesh is adapted with refine to reduce estimated interpolation error in Mach number via the multiscale metric. The adapted mesh implicitly resolves the boundary layers, shocks, and expansions. The surface mesh is shown for the lee side with a slice through the volume on the left. Computational schlieren in the lower right shows density variations. A slice of the mesh is colored with Mach number in the upper right where mesh with freestream Mach number is not rendered. The volume mesh contains 64 million vertices. A NASA worm logo is sketched and extruded into a solid in OpenCSM. The worm is unioned to the Space Needle roof to produce the inset mesh image.

mesh↗

Experimental Considerations for Ground-based Testing of Lunar Construction Technologies

The Moon-to-Mars Planetary Autonomous Construction Technology (MMPACT) project, under NASA’s Game Changing Division (GCD) aims to research, develop, and demonstrate lunar surface construction capabilities[1].A fundamental step in lunar infrastructure development is to quantify the geotechnical properties of lunar regolith, such as shear strength (Mohr-Coulomb cohesion and angle of internal friction), com-pression and bearing properties, and angle of re-pose. Knowledge of these geotechnical properties enables the prediction of forces and displacements associated with lunar infrastructure development processes including excavation and constructing landing pads, habitats, shelters, and roadways. Through ground-based testing of autonomous lunar systems performed using relevant hardware (e.g., robotic arms) in appropriate lunar regolith simulants, the developed hardware/technology and tool paths can be validated. Such testing also generates data to give insight into the geotechnical regolith properties on the lunar surface.

Regolith↗

World’s Largest Liquid Hydrogen Tank Nearing Completion

Construction of the world’s largest liquid hydrogen (LH 2 ) storage tank is almost complete at launch pad 39B at NASA Kennedy Space Center (KSC) in Florida. With a usable capacity of 4732 m 3 (1.25 Mgal), this new vessel is roughly 50% larger than its sister tank, which is located 170 m (550 ft) to the southeast. Once the new sphere is fully commissioned these two tanks will provide a combined LH 2 storage capacity of 7950 m 3 (2.1 Mgal) to fuel the new Space Launch System rocket in support of future Artemis exploration missions to the Moon and Mars.

Adam Swanger↗

Shoulder Postures in EVA Training in Reduced Gravity Analogues

Shoulder Postures in EVA Training in Reduced Gravity Analogues K. Guhl1, L. Vu2, H. Kim3, S. Rajulu4 1KBR Inc., Houston, TX, 2Aegis Aerospace Inc., Houston, TX, 3Leidos Innovations, Houston, TX, 4NASA Johnson Space Center, Houston, TX. During extravehicular activities (EVAs) and EVA training in both the Neutral Buoyancy Laboratory (NBL) and at the Active Response Gravity Offload System (ARGOS), crewmembers perform a variety of hand-intensive tasks with frequent arm/shoulder repositioning while wearing a pressurized spacesuit. As a result, crewmembers may experience ergonomic stressors such as awkward shoulder postures. The ergonomic shoulder risk is also compounded by limited or restricted shoulder mobility of the spacesuit, extreme work positions such as overhead tasks, and tasks with heavy tools and repetitive motions. Prolonged or frequent shoulder elevation and overhead work, in particular, can lead to excessive stresses and musculoskeletal injuries of the shoulder joints. Future EVA missions, specifically lunar surface EVAs, will also be longer in duration and thus increase the exposure to awkward shoulder postures. In this study, we aimed to assess the ergonomic risk of awkward shoulder postures in simulated lunar surface EVAs by quantifying when and how long the arms are raised above the chest level. We assessed video recordings of pilot lunar EVA simulations (3 lunar trials each in the NBL and at ARGOS and 2 microgravity EVA trials in the NBL). These runs consisted of both training and engineering test objectives. Actual demands for shoulder use varied for different EVA types and analogues, but many EVA runs have common tasks and require similar motion components. A video observation and event logging software was used to document the duration and occurrence of the subject’s arms being raised throughout the video recordings of each EVA run. An arm raised instance was classified as the arm being at 90 degrees or above with relation to gravity for lunar EVA training events and with relation to the body for microgravity EVA training events. Such events included EVA hardware maintenance or heavy geology sampling tool operations. Events where the arm load was partially supported by external objects, like climbing a ladder or leaning against a surface were separately identified and excluded. Statistical analysis was performed to summarize the timing, frequency, and durations of the arm raise events and compared across the different EVA tasks and analogue types. Preliminary observations indicated that the total duration and number of arm raised instances were surprisingly smaller for lunar surface EVA training as compared to microgravity EVA training. The observed difference may be attributed to differing task demands and unique environmental characteristics found in lunar EVAs in comparison to microgravity EVAs. A detailed statistical analysis will be performed between lunar surface EVA training events and microgravity EVA training events in the final submission. Overall, this analysis is expected to provide insight into how ergonomic recommendations can be refined for lunar EVA training with pressurized suits. It may also inform task design and influence suit padding design to better protect crewmembers during future lunar training.

Kaitlyn Lea Guhl↗

Lunar Base Construction Planning

Previous lunar missions and campaigns have been restricted to using robotic landers and lunar orbiting satellites as well as sortie type of operations using astronaut crews(NASA Apollo program).Now, the next phase of lunar exploration has begun under NASA’s Artemis program and there has been an international response where other nations such as China, Russia, India, Canada, Japan and theEuropean Union of nations, have all expressed interest in either collaborating or competing with NASA on theMoon. This next phase has an overarching goal of achieving a permanent human presence on theMoon via sustainable methods. A lunar base with human occupancy will require infrastructure to provide shelter, utilities, landing/launch pads, roads, communications, power and all the other necessities to sustain human life and protect equipment.Since human biology is not well suited for surviving in the lunar environment, there will be many forms of automated equipment, autonomy and robotic helpers that will minimize the amount of Extra-Vehicular Activity(EVA) required by the crew. This will mean that the radiation dosage received by the crew will stay within acceptable and safe career doses. Radiation shielding via the use of regolith can also mitigate radiation dangers.The required infrastructure must be constructed, but the mass and logistics of bringing all the construction materials from Earth are prohibitive, which makes the necessary construction difficult to achieve.In-Situ Resource Utilization (ISRU) aims to solve this challenge by sourcing construction materials locally or “in-situ”. This means that their transportation can be completely eliminated, resulting in large cost savings by avoiding the launch out of Earth’s deep gravity well and subsequent trans lunar injection, lunar orbit capture and landing. This paper will give ahistorical review and current status of lunar construction planning and a high level introduction to the required infrastructure and construction equipment that will be required to robotically build a lunar base using in-situ resources.It will also organize these tasks into logical groupings so that technology development and implementation can be pursued within a framework that can be referenced by all involved.

Lunar↗

Power System Design Trades for a Pressurized Lunar/Mars Rover

To enable future human exploration missions, the lunar surface will serve as a crucial training ground and technology demonstration test site where NASA will prepare for future human missions to Mars and other destinations. Key enablers in this exploration are rover systems intended to operate in both the lunar and Mars surface environments. This study focused primarily on the Mars surface environment because, compared to the near-continuous illumination near the lunar poles, the day/night cycles and the reduced solar illumination on Mars make it much more difficult to use solar power. However, solar power is not the only power generation technology available. Top-level energy studies have shown that a radioisotope power system (RPS) has promise for supplying both power and thermal energy for crewed rovers on both the Moon and Mars. This design study investigates how an RPS could potentially meet the power and thermal needs of a pressurized rover with applications for both destinations. The design focus is on what service an RPS can provide and how it would be integrated into a rover (power and thermal interfaces, placement, radiation shielding, fairing installation on the pad, etc.).

RPS↗

Nomenclature for the OSIRIS-REx Returned Sample Collection to be Curated at NASA Johnson Space Center

The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) space-craft collected material from the asteroid Bennu on October 20, 2020. The OSIRIS-REx Sample Return Capsule (SRC) is planned to return to Earth on September 24, 2023. The OSIRIS-REx returned sample collection to be curated at NASA Johnson Space Center (JSC) will include both the asteroid material and the flight hardware. We expect most of the asteroid material to be inside the head of the Touch-and-Go Sample Acquisition Mechanism (TAGSAM), and that this material will include a broad range of particles sizes from as large as a few centimeters to less than a micrometer across in their longest dimension. In addition, asteroid material may have been returned along with the flight hardware: intentionally by the contact pads or screens on the witness plates, or serendipitously wedged into or adhering to hardware items. The nomenclature for this new astromaterials collection must accommodate the different types of samples it comprises.

asteroid↗

A Flexible Multibody Framework for Space Launch System Liftoff with Umbilical Separations

ICPSU clearances to the lifting SLS vehicle were computed utilizing a coupled system nonlinear simulation approach in order to accurately capture the impact of system flexibilities, SLS forcing functions, pad separation (twang), ML dynamics and timings • i.e., integrate ICPSU model into a SLS nonlinear Coupled Loads Analysis (CLA) This required utilizing a flexible multibody framework for the CLA and the integration of large displacements/rotations capabilities into that CLA • Gantry rotation • Disconnect and retraction of flexible hoses

Arya Majed↗

Press-fit Connectors in Spaceflight Applications - Drivers and Challenges

Starting from the 1970s when press-fit technology was nascent and confined within the telecommunications industry, this technology has matured as its adoption has increased within high reliability applications such as medical devices and avionics. Press-fit connectors are strongly preferred in today’s designs because the smaller press-fit pins require smaller diameter holes which require smaller pads and allows more routing real-estate without taking exceptions to specs. The lack of solder for a press-fit connection makes the conductive path more predictable for high-speed digital design and impedance discontinuities can be minimized as the signal moves from the printed circuit board to the connector. Touch-up during manufacturing is also reduced and streamlines the assembly process. This presentation at the 2022 NEPP ETW will introduce the audience to press-fit connectors and its contact physics followed by a deeper dive into specific press-fit applications for space flight environments, including information on qualification, testing, and screening.

pressfit↗

Development of the Advanced Regolith Ground Operations (ARGO) Test Bed– A Robotic Construction Test Facility with Simulated Lunar Environments

NASA’s Artemis Program is working towards developing a sustained presence on the Moon and eventually Mars. To achieve this goal, robotic excavation, site preparation and construction technologies are under development to establish the capability to construct infrastructure such as launch/landing pads and radiation protection shelters. Technologies must be proven in simulated Lunar conditions prior surface demonstration missions. To that end, the Relevant Additive Construction Technology (REACT) Announcement of Collaboration Opportunities (ACO) project with AI Space Factory and the NASA Kennedy Space Center’s (KSC) Granular Mechanics and Regolith Operations Laboratory (a.k.a. Swamp Works) has developed the Advanced Regolith Ground Operations (ARGO) Test Bed. ARGO includes a ~1.5m x 1.5m x 1.2m (~5x5x4ft) vacuum chamber, cryogenically cooled thermal shroud, a 3-axis robotic positioning system, and a regolith bin. For the REACT project, a pellet extruder and feed hopper have been installed on ARGO to advance the Technology Readiness Level (TRL) of regolith-polymer composite Fused Deposition Modeling (FDM) additive construction systems, processes, and materials. This paper will focus on the design and operational characteristics of the ARGO Test Bed with pellet extruder.

Moon↗

Geopolymer Lunar Concrete under Reduced-Pressure Curing and Vacuum Exposure

Geopolymer concrete has emerged as a promising material for constructing habitats, roads, landing pads, and other necessary infrastructure on the lunar surface. Proper in-situ resource utilization (ISRU) is an important aspect of any candidate lunar construction material. Geopolymer concrete is effective at ISRU, as the lunar regolith can be used in the “as found” condition and mixed with an alkaline solution, such as sodium silicate and sodium hydroxide, which could also be mostly produced in-situ. It is envisioned that any concrete material on the lunar surface would be deposited with additive manufacturing techniques and would require a temporary environmental enclosure to mitigate the harsh lunar environment during construction and curing, such as pressure and temperature. Data are needed to set a benchmark for the conditions to be achieved within the deployable environmental enclosure during printing, as well as the resultant material properties after the enclosure is removed. This novel study investigated the influence of reduced atmospheric pressures during the initial curing period on the compressive strength of geopolymer lunar concrete created with two types of lunar regolith simulant. The simulants used in the study represent the regolith for the lunar mare (OPRL2N) and lunar highlands (OPRH2N) regions. Results show a noticeable decline in strength with a reduction in pressure and visible degradation. After the deployable environmental enclosure is removed from the printed segment of infrastructure on the lunar surface, it would then be exposed to the harsh vacuum environment. To understand the importance of curing time required within the deployable enclosure before it is removed, samples were cast and cured for different lengths of time and then exposed to a vacuum chamber capable of achieving 100 mTorr. Control samples were also cast at the same time but left in a standard laboratory environment after curing. The weight change and compressive strength as a function of time in the vacuum chamber were monitored for up to 56 days. The results showed that exposure to the vacuum limits further reaction and strength gain in comparison to control samples left in the laboratory environment. This research is in strong alignment with the 2020 NASA Technology Taxonomy materials area (12.1) and the in-situ resource utilization area (7.1), as it provides necessary data on the geopolymer lunar concrete material to support safe and sustainable options for maintaining a human presence on the Moon.

Moon to Mars Planetary Autonomous Construction Tec↗

High Sensitive and Low Power Nanosensors for Space and Terrestrial Applications

Nanotechnology offers the ability to work at the molecular level, atom by atom, to create large structures with fundamentally new molecular organization. It is essentially concerned with materials, devices, and systems whose structures and components exhibit novel and significantly improved physical, chemical and biological properties, phenomena, and process control due to their nanoscale size. A nanosensor technology has been developed at NASA Ames using nanostructure, single walled carbon nanotubes (SWNTs). The nanosensors have achieved low detection limit of chemicals in the concentration range of ppm to ppb. Due to large surface area, low surface energy barrier and high thermal and mechanical stability, nanostructured chemical sensors offer higher sensitivity, lower power consumption and a more robust solution than most state-of-the-art systems making them attractive for space and terrestrial applications. An example of a sensor module, the first space flown nano device, will be introduced in this presentation. Such sensors have drawn attention from space community for global weather monitoring, space exploration, life search in the universe, and launch pad fuel leak detection and in-flight cabin air and life support system monitoring, and engine operation monitoring. Additionally, the wireless capability of such sensors can be leveraged to network mobile and fixed-base detection and warning systems for civilian population centers, military bases and battlefields, as well as other high-value or high-risk assets and areas in industry.

Jing Li↗