Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Optimized Test Section for Helium Flow Loop Experiment

Phase 3 of this project uses the knowledge and techniques gained from Phase 1 and Phase 2. The first outcome of Phase 3 is a new test section which can be manufactured and tested in the Helium Flow Loop Experiment to verify the results of the optimization study. The second outcome of Phase 3 is analyzing the features of this design and determining its performance under simulated TBM conditions: heat flux, pressure, mass flow rate, one-sided and volumetric heating. This will be accomplished by first using the results from the Phase 1 analyses and then applying the optimization strategy from Phase This phase uses the STAR-CCM+ Design Manager tool to apply the optimization strategy to the Helium Flow Loop Experiment (HFLE). The optimization algorithm used by the Design Manager tool is Simultaneous Hybrid Exploration that is Robust, Progressive, and Adaptive (SHERPA search algorithm). In addition to demonstrating the optimization features, a simple parameter sweep is also included in this phase. This report details the applied single objective optimization.

42 ENGINEERING↗

General Aviation Pilot Advisory and Training System (GAPATS)

The goal of this project is to achieve a validated General Aviation Pilot Advisor and Training System (GAPATS) engineering prototype, implemented according to commercial software standards and Federal Aviation Administration (FAA) issues of certification. Phase 2 builds on progress during Phase 1, which exceeded proposed objectives. The basic technology has been transferred from previous NASA research (1989 to 1994). We anticipate a commercially licensable prototype, validated by pilots in a flight simulator and in a light twin-engine research aircraft for FAA certification, by January 1998.

Painter, John↗

SiO2 Activity Measurements in the Gd2O3-SiO2 System Via Knudsen Effusion Mass Spectrometry (KEMS)

Environmental barrier coatings (EBCs) are required for the use of silicon carbide (SiC)-based ceramic matrix composites (CMCs) in gas turbine engines, as they protect the SiO 2 thermally grown oxide (TGO) formed at the CMC/coating interface from volatilization in a combustion environment. Current-generation EBCs consist of a silicon bond coat and a rare earth (RE) silicate topcoat. The RE silicate topcoat is exposed to high-velocity steam during engine operation, and SiO 2 within the coating can preferentially volatilize to form Si(OH) 4 gas species, albeit at a lesser degree than SiO 2 alone. Therefore, it is of interest to investigate the stability of these materials in steam as a function of their RE. In this study, SiO 2 activity, which can be related to the partial pressure of Si(OH) 4 , was measured across the Gd 2 O 3 -SiO 2 phase diagram, which includes Gd 2 SiO 5 , Gd 9.33 (SiO 4 ) 6 O 2 , and Gd 2 Si 2 O 7 as line compounds, via Knudsen Effusion Mass Spectrometry (KEMS). Values obtained for the Gd 2 O 3 -SiO 2 system were compared to those of other RE2O3-SiO2 systems and contextualized in terms of EBC viability.

EBCs↗

Evaluation of Concentrated Piperazine for CO 2 Capture from Coal-Fired Flue Gas (Final Report, REV0)

Concentrated piperazine (PZ) is a novel solvent being developed by the University of Texas at Austin (UT) for CO 2 capture from coal-fired power plants. The high thermal stability of PZ permits solvent regeneration at higher temperature (150 °C) and pressure, reducing compression capital and operating costs. The purpose of Cooperative Agreement DE-FE0005654, Evaluation of Concentrated Piperazine for CO 2 Capture from Coal-Fired Flue Gas , was to gain operational experience using PZ solvent to absorb CO 2 and explore novel, high-temperature processes for solvent regeneration. The pilot-scale test campaigns funded under this project have resulted in the continual improvement in the heat duty of the regeneration systems and solvent and equipment optimization. This document summarizes the results from the Phase 1 (2011, 2013 and 2015) and Phase 2 (2018) test campaigns. In Phase 1, the campaign was conducted on synthetic flue gas at the University of Texas’ Separations Research Program (SRP) facility to investigate CO 2 capture with 5 and 8 molal (5$m$ and 8$m$) PZ and two-stage flash (2SF) and advanced flash stripper (AFS) regeneration designs. Phase 1 testing also investigated techniques for measuring amine aerosol that can be generated during operation, and the effect of absorber operating conditions and sulfur containing compounds in the flue gas on aerosol generation. This testing showed that the AFS represents an optimized amine regeneration system with superior energy performance and simple operability over the 2SF or a simple stripper (SS), that 5$m$ PZ provides an economic and operability advantage over 8$m$ PZ, and that phase doppler interferometry (PDI) can provide useful particle size information on amine aerosol. In Phase 2, the campaign was conducted on coal-fired flue gas at the National Carbon Capture Center (NCCC) to investigate CO 2 capture with 5$m$ PZ and the AFS. The PZ solvent was also used with an existing SS at the NCCC to provide comparison with the AFS performance. Additionally, the campaign investigated the effect of flue gas SO 3 on amine aerosol from the CO 2 absorber. The NCCC pilot plant testing demonstrated the robustness of the PZ solvent and the high energy performance of the AFS provided significant improvements in energy performance over the conventional SS for PZ and other solvents, and approached the DOE’s economic targets for second generation carbon capture technologies. Extended testing allowed the project team to demonstrate reliable long-term operation of this novel regeneration technology and solvent combination. EPRI, Luminant, B&W, LG&E, Chevron, Southern Company, and UT are project co-funders. UT and Trimeric were project team members. URS Group was the prime contractor.

20 FOSSIL-FUELED POWER PLANTS↗

Understanding the role of carbon atoms on microstructure and phase transformation of high Nb containing TiAl alloys

The microstructure and solidification behavior of high Nb containing TiAl alloys with the composition of Ti-46Al-8Nb-xC (x = 0.1, 0.7, 1.4, 2.5 at.%) prepared by arc-melting method have been investigated in this work. The results give evidence that the addition of carbon changes the solidification behavior from solidification via the β phase to the peritectic solidification. And carbon in solid solution enriches in the α{sub 2} phase and increases the microhardness. As the carbon content increases to 1.4 at.%, plate-shape morphology carbides Ti{sub 2}AlC (H phase) precipitate from the TiAl matrix which leads to the refinement microstructure. By aging at 1173 K for 24 h after quenching treatment, fine needle-like and granular shape Ti{sub 3}AlC (P phase) carbides are observed in the matrix of Ti-46Al-8Nb-2.5C alloy, which distribute along the lamellar structure or around the plate-shape Ti{sub 2}AlC. Transmission electron microscope observation shows that the Ti{sub 3}AlC carbides precipitate at dislocations. The phase transformation in-situ observations indicate that the Ti{sub 2}AlC carbides partly precipitate during the solid state phase transformation process. - Highlights: •Carbon changes the solidification behavior from β phase to peritectic solidification. •Dislocations in solution treated γ phase act as nucleation sites of Ti{sub 3}AlC precipitations. •Ti{sub 3}AlC precipitates as fine needle-like or granular shape in the solution treated matrix. •Ti{sub 2}AlC carbides precipitate during the solid state phase transformation process.

36 MATERIALS SCIENCE↗

Stress-induced phase transformation in nanocrystalline UO2

We report a stress-induced phase transfonnation in stoichiometric UO{sub 2} from fluorite to the {alpha}-PbO{sub 2} structure using molecular dynamics (MD) simulations and density functional theory (DFT) calculations. MD simulations, performed on nanocrystalline microstructure under constant-stress tensile loading conditions, reveal a heterogeneous nucleation of the {alpha}-PbO{sub 2} phase at the grain boundaries followed by the growth of this phase towards the interior of the grain. The DFT calculations confinn the existence of the {alpha}-PbO{sub 2} structure, showing that it is energetically favored under tensile loading conditions.

36 MATERIALS SCIENCE↗

ATD-2 Phase 3 Scheduling in a Metroplex Environment Incorporating Trajectory Option Sets

The NASA Airspace Technology Demonstration 2 Phase 1 and 2 Field Evaluations have successfully demonstrated new technologies developed to manage the Integrated Arrival, Departure, and Surface traffic flows at a single airport. The Phase 3 Field Evaluation extends the capabilities to a Metroplex environment where multiple airports are interacting and sharing resources along the terminal boundary. This paper describes the scheduling algorithm enabling the coordinated scheduling and describes the interaction between airports within the Metroplex and the terminal boundary. We describe the metrics developed to inform flight operators about reroute opportunities and discuss the potential benefits to the rerouted flight and the system-wide aggregate benefits of a single reroute. We believe that the capabilities developed and the lessons learned during the Phase 3 Field Evaluation will set up the National Airspace System for future success.

Airspace Technology Demonstration 2↗

Tetragonal and collapsed-tetragonal phases of CaFe 2 As 2 : A view from angle-resolved photoemission and dynamical mean-field theory

We present a study of the tetragonal to collapsed-tetragonal transition of CaFe 2 As 2 using angle-resolved photoemission spectroscopy and dynamical mean field theory-based electronic structure calculations.We observe that the collapsed-tetragonal phase exhibits reduced correlations and a higher coherence temperature due to the stronger Fe-As hybridization. Furthermore, a comparison of measured photoemission spectra and theoretical spectral functions shows that momentum-dependent corrections to the density functional band structure are essential for the description of low-energy quasiparticle dispersions. We introduce those using the recently proposed combined screened exchange + dynamical mean field theory scheme.

74 ATOMIC AND MOLECULAR PHYSICS↗

A first-principles study on new high-pressure metastable polymorphs of MoO{sub 2}

The pressure-dependence of the stabilities of several MoO{sub 2} phases has been investigated by density-functional theory (GGA/PBE/PAW). Out of a set of 15 MX{sub 2} structures, the [SnO{sub 2}(II)], [α-PbO{sub 2}], and a modified rutile structure type were identified as possible metastable MoO{sub 2} polymorphs based on the analysis of thermodynamic properties and dynamic stability. High-pressure calculations suggest an orthorhombic TiO{sub 2} structure, dubbed [ortho-TiO{sub 2}], as a high-pressure polymorph at around 25 GPa. Furthermore, we find that the previously reported rutile-type MoO{sub 2} may be understood as a modified rutile type similar to the [VO{sub 2}] structure. - Graphical abstract: First-principles electronic structure and thermochemical calculations reveal four structure candidates as possible metastable polymorphs of MoO{sub 2}. Most promising is a distorted rutile-type similar to the known [VO{sub 2}] structure. An orthorhombic polymorph is proposed as a high-pressure polymorph. Display Omitted - Highlights: • Three possible metastable structure candidates for MoO{sub 2}. • Undistorted rutile type is improbable, a new distorted rutile-type MoO{sub 2} was suggested. • Orthorhombic phase of MoO{sub 2} (ortho-TiO{sub 2} type) should form at 25 GPa. • ab initio thermochemical data provided for MoO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of tensile loading during annealing of alnico melt spun ribbons

Conventional magnetic annealing (MA) of the permanent magnet alloy alnico involves application of an external magnetic field at temperatures within the spinodal decomposition range. This field biases the growth of the Fe-Co rich, ferromagnetic α 1 -phase in an energetically favorable 〈001〉 direction in alignment with the applied field within an Al-Ni rich, paramagnetic α 2 -phase. Utilizing a magnetic field to bias the α 1 -phase may limit alnico from reaching theoretical coercivity due to (1) the field having maximum biasing ability at temperatures near the Curie temperature where large α 1 -phase nanorods form and (2) connectivity of the α 1 -phase occurs unavoidably during MA. Both decrease the effective shape anisotropy of the α 1 -phase, thereby reducing coercivity. Herein, we explore tensile-loading as a biasing mechanism to control and optimize the final alnico nanostructure beyond that achieved by MA. Two samples of melt-spun alnico were heat-treated at 860 °C for 5 minutes: one sample was subjected to 10 MPa tensile stress for comparison with a stress-free control sample. Structural and magnetic characterization revealed that the stress-annealed ribbon sample possessed expected phase assemblages, but was distinguished by a ∼2× larger grain diameter and an elongated anisotropic α 1 -phase within grains that were oriented to a shear stress along 〈001〉 directions at an angle of ∼45° relative to the loading direction. Both types of annealing produced a similar increase in the coercivity and remanence, but a decrease in saturation magnetization.

Rinko, E. A.↗

Phase 1/2 Trials of Temozolomide, Motexafin Gadolinium, and 60-Gy Fractionated Radiation for Newly Diagnosed Supratentorial Glioblastoma Multiforme: Final Results of RTOG 0513

Purpose: The purpose of phase 1 was to determine the maximum tolerated dose (MTD) of motexafin gadolinium (MGd) given concurrently with temozolomide (TMZ) and radiation therapy (RT) in patients with newly diagnosed supratentorial glioblastoma multiforme (GBM). Phase 2 determined whether this combination improved overall survival (OS) and progression-free survival (PFS) in GBM recursive partitioning analysis class III to V patients compared to therapies for recently published historical controls. Methods and Materials: Dose escalation in phase 1 progressed through 3 cohorts until 2 of 6 patients experienced dose-limiting toxicity or a dose of 5 mg/kg was reached. Once MTD was established, a 1-sided 1-sample log-rank test at significance level of .1 had 85% power to detect a median survival difference (13.69 vs 18.48 months) with 60 deaths over a 12-month accrual period and an additional 18 months of follow-up. OS and PFS were estimated using the Kaplan-Meier method. Results: In phase 1, 24 patients were enrolled. The MTD established was 5 mg/kg, given intravenously 5 days a week for the first 10 RT fractions, then 3 times a week for the duration of RT. The 7 patients enrolled in the third dose level and the 94 enrolled in phase 2 received this dose. Of these 101 patients, 87 were eligible and evaluable. Median survival time was 15.6 months (95% confidence interval [CI]: 12.9-17.6 months), not significantly different from that of the historical control (P=.36). Median PFS was 7.6 months (95% CI: 5.7-9.6 months). One patient (1%) experienced a grade 5 adverse event possibly related to therapy during the concurrent phase, and none experience toxicity during adjuvant TMZ therapy. Conclusions: Treatment was well tolerated, but median OS did not reach improvement specified by protocol compared to historical control, indicating that the combination of standard RT with TMZ and MGd did not achieve a significant survival advantage.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Electronic structure and physical properties of the spinel-type phase of BeP{sub 2}N{sub 4} from all-electron density functional calculations

Using density-functional-theory-based ab initio methods, the electronic structure and physical properties of the newly synthesized nitride BeP{sub 2}N{sub 4} with a phenakite-type structure and the predicted high-pressure spinel phase of BeP{sub 2}N{sub 4} are studied in detail. It is shown that both polymorphs are wide band-gap semiconductors with relatively small electron effective masses at the conduction-band minima. The spinel-type phase is more covalently bonded due to the increased number of P-N bonds for P at the octahedral sites. Calculations of mechanical properties indicate that the spinel-type polymorph is a promising superhard material with notably large bulk, shear, and Young's moduli. Also calculated are the Be K, P K, P L{sub 3}, and N K edges of the electron energy-loss near-edge structure for both phases. They show marked differences because of the different local environments of the atoms in the two crystalline polymorphs. These differences will be very useful for the experimental identification of the products of high-pressure syntheses targeting the predicted spinel-type phase of BeP{sub 2}N{sub 4}.

36 MATERIALS SCIENCE↗

Hydrothermal corrosion studies on nitride fuels

Uranium mononitride (UN) has been identified as a candidate nuclear fuel for use in the current US light water reactor (LWR) fleet as well as in next generation nuclear plants (NGNP), largely due to its high uranium density and thermal conductivity. However, its hydrothermal corrosion performance in accident scenarios has not been thoroughly investigated. In this work, UN was synthesized using a hydride-de-hydride-nitride thermal synthesis route prior to sintering into dense compacts (> 90% TD). The compacts were corroded in a water filled autoclave up to 350 Celsius degrees and 125 atm. The kinetics of corrosion were characterized through phase analysis, mass loss, and microstructural analysis. The phases observed after hydrothermal corrosion correspond only to UN, UO{sub 2}, and UN{sub 2}; no U{sub 2}N{sub 3} was observed. Additionally, it appears that nitrogen uptake into the lattice of the solid product is a product of lattice strain and peak broadening, especially of the UN{sub 2} phase. UO{sub 2} appears to nucleate on the surface of the UN-UO{sub 2} monoliths and consumes the UN grain boundaries which suggests that in pure UN, UO{sub 2} formation proceeds from the surface and moves towards the core, but in samples with nominal concentrations of UO{sub 2}, oxidation from hydrolysis occurs throughout the bulk of the monoliths. Furthermore, it was demonstrated here that UN and UN-UO{sub 2} composites perform better than previously reported in the literature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lithium Storage Mechanisms and Electrochemical Behavior of a Molybdenum Disulfide Nanoparticle Anode

This study investigates the electrochemical behavior of molybdenum disulfide (MoS 2 ) as an anode in Li-ion batteries, focusing on the extra capacity phenomenon. Employing advanced characterization methods such as in situ and ex situ X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy, the research unravels the complex structural and chemical evolution of MoS 2 throughout its cycling. A key discovery is the identification of a unique Li intercalation mechanism in MoS 2 , leading to the formation of reversible Li x MoS 2 phases that contribute to the extra capacity of the MoS 2 electrode. Density function theory calculations suggest the potential for overlithiation in MoS 2 , predicting Li 5 MoS 2 as the most energetically favorable phase within the lithiation–delithiation process. Additionally, the formation of a Li-rich phase on the surface of Li 4 MoS 2 is considered energetically advantageous. After the first discharge, the battery system engages in two main reactions. One involves operation as a Li-sulfur battery within the carbonate electrolyte, and the other is the reversible intercalation and deintercalation of Li in Li x MoS 2 . The latter reaction contributes to the extra capacity of the battery. The incorporation of reduced graphene oxide as a conductive additive in MoS 2 electrodes notably improves their rate capability and cycling stability.

Lithium Rich Phase↗

Vaccum Gas Tungsten Arc Welding, phase 1

This two year program will investigate Vacuum Gas Tungsten Arc Welding (VGTAW) as a method to modify or improve the weldability of normally difficult-to-weld materials. VGTAW appears to offer a significant improvement in weldability because of the clean environment and lower heat input needed. The overall objective of the program is to develop the VGTAW technology and implement it into a manufacturing environment that will result in lower cost, better quality and higher reliability aerospace components for the space shuttle and other NASA space systems. Phase 1 of this program was aimed at demonstrating the process's ability to weld normally difficult-to-weld materials. Phase 2 will focus on further evaluation, a hardware demonstration and a plan to implement VGTAW technology into a manufacturing environment. During Phase 1, the following tasks were performed: (1) Task 11000 Facility Modification - an existing vacuum chamber was modified and adapted to a GTAW power supply; (2) Task 12000 Materials Selection - four difficult-to-weld materials typically used in the construction of aerospace hardware were chosen for study; (3) Task 13000 VGTAW Experiments - welding experiments were conducted under vacuum using the hollow tungsten electrode and evaluation. As a result of this effort, two materials, NARloy Z and Incoloy 903, were downselected for further characterization in Phase 2; and (4) Task 13100 Aluminum-Lithium Weld Studies - this task was added to the original work statement to investigate the effects of vacuum welding and weld pool vibration on aluminum-lithium alloys.

Weeks, J. L.↗

Evidence of Specific MJO Phase Occurrence with Summertime California Central Valley Extreme Hot Weather

This study examines associations between California Central Valley (CCV) heat waves and the Madden Julian Oscillation (MJO). These heat waves have major economic impact. Our prior work showed that CCV heat waves are frequently preceded by convection over the tropical Indian and eastern Pacific oceans, in patterns identifiable with MJO phases. The main analysis method is lagged composites (formed after each MJO phase pair) of CCV synoptic station temperature, outgoing longwave radiation (OLR), and velocity potential (VP). Over the CCV, positive temperature anomalies occur only after the Indian Ocean (phases 2–3) or eastern Pacific Ocean (phases 8–1) convection (implied by OLR and VP fields). The largest fractions of CCV hot days occur in the two weeks after onset of those two phase pairs. OLR and VP composites have significant subsidence and convergence above divergence over the CCV during heat waves, and these structures are each part of larger patterns having significant areas over the Indian and Pacific Oceans. Prior studies showed that CCV heat waves can be roughly grouped into two clusters: Cluster 2 is preceded by a heat wave over northwestern North America, while Cluster 1 is not. OLR and VP composite analyses are applied separately to these two clusters. However, for Cluster 2, the subsidence and VP over the CCV are not significant, and the large-scale VP pattern has low correlation with the MJO lagged composite field. Therefore, the association between the MJO convection and subsequent CCV heat wave is more evident in Cluster 1 than Cluster 2.

54 ENVIRONMENTAL SCIENCES↗