Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis. CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

In situ investigation of the formation and metastability of formamidinium lead tri-iodide perovskite solar cells

Organic–inorganic perovskites have emerged as an important class of next generation solar cells due to their remarkably low cost, band gap, and sub-900 nm absorption onset. Here, we show a series of in situ observations inside electron microscopes and X-ray diffractometers under device-relevant synthesis conditions focused on revealing the crystallization process of the formamidinium lead-triiodide perovskite at the optimum temperature of 175 °C. Direct in situ observations of the structure and chemistry over relevant spatial, temporal, and temperature scales enabled identification of key perovskite formation and degradation mechanisms related to grain evolution and interface chemistry. The lead composition was observed to fluctuate at grain boundaries, indicating a mobile lead-containing species, a process found to be partially reversible at a key temperature of 175 °C. Using low energy electron microscopy and valence electron energy loss spectroscopy, lead is found to be bonded in the grain interior with iodine in a tetrahedral configuration. At the grain boundaries, the binding energy associated with lead is consequently shifted by nearly 2 eV and a doublet peak is resolved due presumably to a greater degree of hybridization and the potential for several different bonding configurations. At the grain boundaries there is adsorption of hydrogen and OH¯ ions as a result of residual water vapor trapped as a non-crystalline material during formation. Lastly, insights into the relevant formation and decomposition reactions of formamidinium lead iodide at low to high temperatures, observed metastabilities, and relationship with the photovoltaic performance were obtained and used to optimize device processing resulting in conversion efficiencies of up to 17.09% within the stability period of the devices.

14 SOLAR ENERGY↗

The multi-assumption architecture and testbed (MAAT v1.0): R code for generating ensembles with dynamic model structure and analysis of epistemic uncertainty from multiple sources

Abstract. Here, computer models are ubiquitous tools used to represent systems across many scientific and engineering domains. For any given system, many computer models exist, each built on different assumptions and demonstrating variability in the ways in which these systems can be represented. This variability is known as epistemic uncertainty, i.e. uncertainty in our knowledge of how these systems operate. Two primary sources of epistemic uncertainty are (1) uncertain parameter values and (2) uncertain mathematical representations of the processes that comprise the system. Many formal methods exist to analyse parameter-based epistemic uncertainty, while process-representation-based epistemic uncertainty is often analysed post hoc, incompletely, informally, or is ignored. In this model description paper we present the multi-assumption architecture and testbed (MAAT v1.0) designed to formally and completely analyse process-representation-based epistemic uncertainty. MAAT is a modular modelling code that can simply and efficiently vary model structure (process representation), allowing for the generation and running of large model ensembles that vary in process representation, parameters, parameter values, and environmental conditions during a single execution of the code. MAAT v1.0 approaches epistemic uncertainty through sensitivity analysis, assigning variability in model output to processes (process representation and parameters) or to individual parameters. In this model description paper we describe MAAT and, by using a simple groundwater model example, verify that the sensitivity analysis algorithms have been correctly implemented. The main system model currently coded in MAAT is a unified, leaf-scale enzyme kinetic model of C 3 photosynthesis. In the Appendix we describe the photosynthesis model and the unification of multiple representations of photosynthetic processes. The numerical solution to leaf-scale photosynthesis is verified and examples of process variability in temperature response functions are provided. For rapid application to new systems, the MAAT algorithms for efficient variation of model structure and sensitivity analysis are agnostic of the specific system model employed. Therefore MAAT provides a tool for the development of novel or toy models in many domains, i.e. not only photosynthesis, facilitating rapid informal and formal comparison of alternative modelling approaches.

54 ENVIRONMENTAL SCIENCES↗

Optimal Design of Intensified Towers for CO2 Capture with Internal, Printed Heat Exchangers

Solvent-based carbon capture processes typically suffer from the temperature rise of the solvent due to the heat of absorption of CO2. This increased temperature is not thermodynamically favor-able and results in a significant reduction in performance in the absorber column. As opposed to interstage coolers, which only remove, cool, and return the solvent at discrete locations in the column, internal coolers that are integrated with the packing can cool the process inline, which can result in improved efficiency. This work presents the modeling of these internal coolers within an existing generic, equation-oriented absorber column model that can cool the process while allowing for simultaneous mass transfer. Optimization of this model is also performed, which is capable of optimally choosing the best locations to place these devices, such that heat removal and mass transfer area are balanced. Results of the optimization have shown that optimally placed cooling elements result in a significant increase in the capture efficiency of the process, compared to a similar column with no internal cooling, with a common trend being the cooling of the column in the temperature bulge region. It is observed that by optimally placing an internal cooler, the solvent flow rate can be decreased, and the CO2 lean loading can be increased while still maintaining the same efficiency. These process changes can lead to a substantial reduction in costs due to lower reboiler duty.

Summits, Stephen↗

Carbon Dioxide Utilization Life Cycle Analysis Guidance for the U.S. DOE Office of Fossil Energy and Carbon Management (Version 2.0)

Capturing carbon dioxide (CO 2 ) and placing it in permanent storage in geologic formations is an option for reducing CO 2 emissions, but it may not be a viable one for all CO 2 emitters. For some, the added cost of capture may be too high to implement, or the geology near the source may not be suitable for storage. In these circumstances, other options will be needed. Carbon use and reuse, or CO 2 utilization (CO2U), is an alternative approach that seeks beneficial uses for captured CO 2 , such as using it as a feedstock in the production of fuels, chemicals, and building materials. These uses would give CO 2 value that could be used by suppliers (emitters) to offset capture costs. One of the principal features and challenges associated with CO2U is that the products derived from CO 2 must have lower carbon footprints than their conventional counterparts. Previous assessments of CO2U alternatives have focused on the carbon content of utilization products as an indicator of CO 2 equivalent (CO 2 e) emissions reduction potential. However, embodied emissions are—at best—only weakly correlated with the amount of carbon contained in any physical product. Therefore, the most attractive CO2U options will both displace the carbon in an existing product and improve the overall carbon efficiency of the manufacturing process. Research to overcome barriers will include identifying existing co-feeds and available low-carbon energy sources to enable the conversion of CO 2 to value-added products under favorable processing conditions. New discoveries in the fields of nano- and bio-technology will be applied to efficiently utilize CO 2 in new applications. Development of advanced materials and processes, integrating CO 2 capture with utilization processes (e.g., algae), exploring a diverse slate of products from CO 2 to effectively offset capture costs and developing processes based on waste energy are means to overcome these barriers. The research will lead to the development of advanced catalysts, materials, and equipment that can be used to convert CO 2 into useful products. The result will be multiple flexible and adaptable technology platforms that can be used to produce suites of products spanning multiple utilization pathways.

54 ENVIRONMENTAL SCIENCES↗

A Low-Cost Fabrication Technique for the Growth of Single-Domain GdBCO Bulk Superconductor from Raw Metal Oxides

A single-domain GdBCO bulk superconductor is usually fabricated using a mixture of pre-reacted precursor powders (including GdBa{sub 2}Cu{sub 3}O{sub 7−δ} and Gd{sub 2}BaCuO{sub 5}) by the top-seeded melt texture growth (TSMTG) process. However, the synthesis of pure-phase precursor powder by the solid-state sintering reaction can not only consume time for weeks but also prolong the fabrication process and can lead to a low-efficiency and high-cost process. In this paper, we reported the successful growth of single-domain GdBCO bulk superconductors by the top-seeded metallic oxide melt growth (TS-MOMG) process in which the raw materials of Gd{sub 2}O{sub 3}, BaO, and CuO, the three different metallic oxides, are just involved to fabricate the single-domain GdBCO bulk superconductors. After detailed investigations in the morphology, levitation force, trapped magnetic field, and critical temperature of the grown samples with different ratios, it was found that the simplified precursor-phase source can be used to fabricate the single-domain GdBCO bulk superconductors more efficiently, which can combine the crystal growth procedure and greatly economize the preparation cost and the time to the most extent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biofuels from Solar Energy and Bacteria: Electrofuels Via Direct Electron Transfer from Electrodes to Microbes

Electrofuels Project: UMass is feeding renewable electricity to bacteria to provide the microorganisms with the energy they need to turn carbon dioxide (CO2) directly into liquid fuels. UMass’ energy-to-fuels conversion process is anticipated to be more efficient than current biofuels approaches in part because this process will leverage the high efficiency of photovoltaics to convert solar energy into electricity. UMass is using bacteria already known to produce biofuel from electric current and CO2 and working to increase the amount of electric current those microorganisms will accept and use for biofuels production. In collaboration with scientists at University of California, San Diego, the UMass team is also investigating the use of hydrogen sulfide as a source of energy to power biofuel production.

Advanced Fuels↗

Estimation of process steady state with autoregressive models and Bayesian inference

To improve efficiency, separations engineers will typically design process circuits containing recirculating streams, which mix one or more of the process outputs with the feed material. Doing so can improve efficiency, but will cause a delay in the system reaching steady state conditions until the recirculating load mass flows stabilize. In testing separation circuits, engineers will often test a variety of factors and complete an analysis from sample results. Knowledge of if a process is at steady state, as well as the steady state conditions of a process, is essential for a valid techno-economic analysis. However, the definition of process steady state is often poorly defined, or does not include uncertainty quantification. If the performance of a process operating under two different sets of conditions are compared, an engineer who does not test for steady state or quantify steady state conditions risks producing a faulty analysis. In this work, a Bayesian statistical method for testing if all streams are at steady state is further motivated and then derived. Then after testing for steady state, the same model is used with a prior distribution that enforces a steady state assumption to estimate steady state conditions. Further, these methods were validated in a solvent extraction pilot plant where steady state conditions for all outflows were inferred with uncertainty quantification. Analysis is completed with functions available to the reader as part of the BayesMassBal (V 1.1.0) software package written in R.

01 COAL, LIGNITE, AND PEAT↗

Surface relief grating in azo-polymer obtained for s-s polarization configuration of the writing beams

The paper reports on the formation of the surface relief gratings in thin films of the azobenzene-functionalized polymer. We evidence that the efficiency of the formation process of the surface relief gratings strongly depends on the length of the main polymer chains in the case of the s-s configuration. The explanation of this relationship is given and is based on the revealing of the differences in the ability of the motion of the main chain which is strictly related to its length.

36 MATERIALS SCIENCE↗

Development of the hybrid sulfur cycle for use with concentrated solar heat. I. Conceptual design

We propose a detailed conceptual design of a solar hybrid sulfur (HyS) cycle. Numerous design tradeoffs, including process operating conditions and strategies, methods of integration with solar energy sources, and solar design options were considered. A baseline design was selected, and process flowsheets were developed. Pinch analyses were performed to establish the limiting energy efficiency. Detailed material and energy balances were completed, and a full stream table prepared. Design assumptions include use of: location in the southwest US desert, falling particle concentrated solar receiver, indirect heat transfer via pressurized helium, continuous operation with thermal energy storage, liquid-fed electrolyzer with PBI membrane, and bayonet-type acid decomposer. Thermochemical cycle efficiency for the HyS process was estimated to be 35.0%, LHV basis. The solar-to-hydrogen (STH) energy conversion ratio was 16.9%. This thus exceeds the Year 2015 DOE STCH target of STH >10%, and shows promise for meeting the Year 2020 target of 20%.

08 HYDROGEN↗

Integrating theory, synthesis, spectroscopy and device efficiency to design and characterize donor materials for organic photovoltaics: a case study including 12 donors

There have been remarkable improvements in the power conversion efficiency of solution-processable Organic Photovoltaics (OPV) have largely been driven by the development of novel narrow bandgap copolymer donors comprising an electron-donating (D) and an electron-withdrawing (A) group within the repeat unit. The large pool of potential D and A units and the laborious processes of chemical synthesis and device optimization, has made progress on new high efficiency materials slow with a few new efficient copolymers reported every year despite the large number of groups pursuing these materials. In our paper we present an integrated approach toward new narrow bandgap copolymers that uses theory to guide the selection of materials to be synthesized based on their predicted energy levels, and time-resolved microwave conductivity (TRMC) to select the best-performing copolymer–fullerene bulk heterojunction to be incorporated into complete OPV devices. We validate our methodology by using a diverse group of 12 copolymers, including new and literature materials, to demonstrate good correlation between (a) theoretically determined energy levels of polymers and experimentally determined ionization energies and electron affinities and (b) photoconductance, measured by TRMC, and OPV device performance. The materials used here also allow us to explore whether further copolymer design rules need to be incorporated into our methodology for materials selection. For example, we explore the effect of the enthalpy change (ΔH) during exciton dissociation on the efficiency of free charge carrier generation and device efficiency and find that ΔH of -0.4 eV is sufficient for efficient charge generation.

14 SOLAR ENERGY↗

Opportunities for Process Intensification with Membranes to Promote Circular Economy Development for Critical Minerals

Critical minerals are essential to the future of clean energy, especially energy storage, electric vehicles, and advanced electronics. In this paper, we argue that process systems engineering (PSE) paradigms provide essential frameworks for enhancing the sustainability and efficiency of critical mineral processing pathways. As a concrete example, we review challenges and opportu-nities across material-to-infrastructure scales for process intensification (PI) with membranes. Within critical mineral processing, there is a need to reduce environmental impact, especially con-cerning chemical reagent usage. Feed concentrations and product demand variability require flex-ible, intensified processes. Further, unique feedstocks require unique processes (i.e., no one-size-fits-all recycling or refining system exists). Membrane materials span a vast design space that allows significant optimization. Therefore, there is a need to rapidly identify the best opportunities for membrane implementation, thus informing materials optimization with process and infrastructure scale performance targets. Finally, scale-up must be accelerated and de-risked across the materials-to-process levels to fully realize the opportunity presented by membranes, thereby fostering the development of a circular economy for critical minerals. Tackling these challenges requires integrating efforts across diverse disciplines. We advocate for a holistic molecular-to-systems perspective for fully realizing PI with membranes to address sustainability challenges in critical mineral processing. The opportunities for PI with membranes are excellent applications for emerging research in machine learning, data science, automation, and optimization.

Dougher, Molly↗

Acquisition, Sharing and Processing of Large Datasets for Strain Imaging: an Example of an Indented Ni3Al/Mo Composite

The local effects of stress from a mechanical indentation have been studied on a Ni3 Al single crystal containing submicron inclusions of molybdenum fibers. Polychromatic X ray Microscopy (PXM) was used to measure elastic and plastic deformations near the indents. Analysis of freshly acquired massive sets of PXM data has been carried out over the Science Studio network using parallel processing software FOXMAS. This network and the FOXMAS software have greatly improved the efficiency of the data processing task.. The analysis was successfully applied to study lattice orientation distribution and strain tensor components for both the Ni3 Al and the Mo phases, particularly around 8 indents patterned at the longitudinal section of the alloy.

data processing↗

Separation of Zirconium from Zircaloy-2 for Spent Nuclear Fuel Cladding Applications using a Chloride Volatility Process

The United States produces a large amount of cladding material from used nuclear fuel, expected to approach 1,000 MT/year for the next 50 years. The recovery of zirconium from the cladding material would represent a ∼50% savings on the geologic waste disposal requirement, and savings of >$40 M/year due to the cost of hafnium-free zirconium. Previous simulation studies have shown that in the irradiated cladding, the major activation products found are {sup 125}Sb, {sup 60}Co, and {sup 93m}Nb, and the major fission product found is {sup 137}Cs. These radioisotopes make it impossible to treat the cladding as low level waste. In a chlorination method, zirconium cladding reacts with Cl{sub 2} at 350-380 deg. C to produce mainly ZrCl{sub 4}. The zirconium tetrachloride has a relatively low boiling point (sublimes at 330 deg. C) which allows its separation from other products, and so it can be treated as low level waste for disposal or recycling. This chlorination approach has been proposed for the reprocessing of zirconium. However, previous work has observed element impurities (Fe, Sn, Cr, Cs, Sb, and Nb) in the recovered ZrCl{sub 4} meaning that additional steps are necessary in a chlorination process previous to the reduction of ZrCl{sub 4} to the metallic form. The chlorination process for zirconium reprocessing has been highly encouraged as it has proven more efficient than previous mechanical processes, redox processes, and other chemical methods such as iodination. The overall goal of this project is to develop the road map for a chlorination process that will yield high purity zirconium. The current study focuses on the recovery of ZrCl{sub 4} from non-irradiated alloys used as nuclear fuel cladding. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of the Chlorination Products of Zirconium Alloys used for Nuclear Fuel Cladding

The United States produces over 2000 metric tons of used nuclear fuel material per year, of which 25% is irradiated fuel cladding, and it is expected to increase for the next 50 years. Previous simulation studies have shown that in the irradiated cladding, the major activation products found are {sup 125}Sb, {sup 60}Co, and {sup 99m}Nb, and the major fission product found is {sup 137}Cs. These radioisotopes make it impossible to treat the cladding as low level waste. A chlorination process has been proposed for zirconium reprocessing as it has been proven more efficient than previous mechanical processes, redox processes, and other chemical methods (e.g. iodination). In the chlorination process, zirconium alloy cladding reacts with Cl{sub 2} at 350- 380 deg. C to produce mainly ZrCl{sub 4}. The zirconium tetrachloride has a relatively low sublimation point (331 deg. C) that allows its separation from other products, and so it can be treated as low level waste for disposal or recycling. However, previous work has observed element impurities (iron, tin, chromium, cesium, antimony, and niobium) in the recovered ZrCl{sub 4}, meaning that additional steps are necessary in a chlorination process previous to the reduction of ZrCl, to metallic Zr. The emphasis of this research summary is on the progress that has been made to isolate and characterize the impurities produced after chlorination of three previously characterized non-irradiated zirconium alloys (Zircaloy-2, Zircaloy-4, and a commercial Zr-Nb alloy) widely used as cladding materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Efficient Light Extraction of Organic Light-Emitting Diodes on a Fully Solution-Processed Flexible Substrate

A flexible, nanocomposite substrate for maximizing light outcoupling efficiencies of organic light-emitting diodes (OLEDs) is introduced. In depth investigation is performed on designing the integrated strategy based on considerations of surface conductivity, microcavity tuning, and internal light scattering. The resulting nanocomposite substrate consists of silver nanowires as the electrode and a high-index polymer layer and a light-scattering layer for light extraction. It is able to outcouple both the waveguide and the substrate modes, two modes accounting for significant losses in OLED device efficiency. With enhanced light outcoupling, white OLEDs subsequently fabricated on the nanocomposite substrates demonstrate performance metrics of 107 lm W -1 power efficiency and 49% external quantum efficiency at 1000 cd m -2 . Thus, the nanocomposite substrate is fabricated by solution processes at low temperatures for potentially low manufacturing cost.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

On the Efficient Evaluation of the Exchange Correlation Potential on Graphics Processing Unit Clusters

The predominance of Kohn–Sham density functional theory (KS-DFT) for the theoretical treatment of large experimentally relevant systems in molecular chemistry and materials science relies primarily on the existence of efficient software implementations which are capable of leveraging the latest advances in modern high-performance computing (HPC). With recent trends in HPC leading toward increasing reliance on heterogeneous accelerator-based architectures such as graphics processing units (GPU), existing code bases must embrace these architectural advances to maintain the high levels of performance that have come to be expected for these methods. In this work, we purpose a three-level parallelism scheme for the distributed numerical integration of the exchange-correlation (XC) potential in the Gaussian basis set discretization of the Kohn–Sham equations on large computing clusters consisting of multiple GPUs per compute node. In addition, we purpose and demonstrate the efficacy of the use of batched kernels, including batched level-3 BLAS operations, in achieving high levels of performance on the GPU. We demonstrate the performance and scalability of the implementation of the purposed method in the NWChemEx software package by comparing to the existing scalable CPU XC integration in NWChem.

97 MATHEMATICS AND COMPUTING↗