Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reactor Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

A Study of the Transition to Turbulence in a Bed of 67 Spherical Pebbles

Packed beds are commonly found in many engineering systems and have been widely studied for decades. A relatively new packed bed system is the Pebble Bed Reactor, a type of generation-IV nuclear reactor. Unlike many of the packed beds encountered in chemical and process engineering applications, Pebble Bed Reactors are larger and operate at significantly higher Reynolds numbers. As a result of these differences, there is a very limited amount of information on the detailed flow physics that exist in these complex geometries. This work seeks to contribute to a growing database of flow data for Pebble Bed Reactor systems by performing Direct Numerical Simulations of the flow in an experimental bed of 67 pebbles for a range of conditions. Simulations are performed at a Prandtl number of 0.66 and Reynolds numbers from 300–600. These Reynolds numbers are chosen to gain additional knowledge on the spatial development of turbulence in these systems. Analysis of the Turbulent Kinetic Energy, turbulence anisotropy, and Turbulent Heat Flux is performed. Results demonstrate significant development of the TKE across the tested range of Reynolds numbers. Examination of both the TKE and THF reveal that development first occurs near the center of the bed and propagates radially as the flow moves further into the bed. Notable regions of negative production of turbulent kinetic energy are observed in regions where flow accelerates around pebble contact points. Furthermore, these regions are found to coincide with regions of 1-component turbulence.Kindly check and confirm, all authors email id is correctly identified.These are correct

Direct numberical simulation↗

Thermal-CFD Analysis of Combined Solar-Nuclear Cycle Systems.

The aim of this paper is evaluating the efficiency of a novel combined solar-nuclear cycle. CFD-Thermal analysis is performed to apply the available surplus heat from the nuclear cycle and measure the available kinetic energy of air for the turbine of a solar chimney power plant system (SCPPS). The presented idea helps to decrease the thermal pollution and handle the water shortage supply for water plant by replacing the cooling tower by solar chimney power plant to get the surplus heat from the available warm air in the secondary loop of the reactor. By applying this idea to a typical 1000 MW nuclear power plant with a 0.33 thermal efficiency, we can increase it to 0.39.

14 SOLAR ENERGY↗

External perturbation-driven Sabatier breakthrough

The Sabatier reaction (CO 2 + 4H 2 → CH 4 + 2H 2 O) is gaining renewed interest due to its potential to reduce energy carrier storage costs, serve as a feedstock for various organic chemicals, and supply in-situ propellant and life-support resources for long-duration Mars missions. This study demonstrates that combining a modest 2 mA electric field with H 2 feed modulation markedly elevates the CO 2 hydrogenation activity of 2 wt% Ru/CeO 2 catalyst. CO 2 conversion reaches 88 % and 93 % with a CH 4 yield of 83 % and 89 % at 350 °C and 450 °C, respectively. A simple lumped kinetic model reveals that the combined external perturbations not only shift the reaction mechanism but also redistribute key surface-adsorbed intermediates such as hydrogen adatoms and hydrogen-activated CO 2 among the Ru clusters, Ru/CeO 2 interface, and ceria surface. The electric field accelerates the conversion of adsorbed CO 2 to the hydrogenated CO 2 species on Ru and boosts CH 4 formation rate constant, while simultaneously suppresses the formation of undesired, non-reactive surface intermediates. Degree-of-rate-control analysis pinpoints proton migration across the metal-support interface as the decisive lever under these coupled perturbations. In conclusion, these findings establish that rational pairing of metal-support design with well-tuned electric fields and feed oscillations can unlock unprecedented Sabatier rates, guiding the development of next-generation reactors for efficient CO 2 to CH 4 conversion.

10 - SYNTHETIC FUELS↗

Advances and perspectives on mass transfer and enzymatic hydrolysis in the enzyme-mediated lignocellulosic biorefinery: A review

We report enzymatic hydrolysis is a critical process for the cellulase-mediated lignocellulosic biorefinery to produce sugar syrups that can be converted into a whole range of biofuels and biochemicals. Such a process operating at high-solid loadings (i.e., scarcely any free water or roughly ≥ 15% solids, w/w) is considered more economically feasible, as it can generate a high sugar concentration at low operation and capital costs. However, this approach remains restricted and incurs “high-solid effects”, ultimately causing the lower hydrolysis yields with increasing solid loadings. The lack of available water leads to a highly viscous system with impaired mixing that exhibits strong transfer resistance and reaction limitation imposed on enzyme action. Evidently, high-solid enzymatic hydrolysis involves multi-scale mass transfer and multi-phase enzyme reaction, and thus requires a synergistic perspective of transfer and biotransformation to assess the interactions among water, biomass components, and cellulase enzymes. Porous particle characteristics of biomass and its interface properties determine the water form and distribution state surrounding the particles, which are summarized in this review aiming to identify the water-driven multi-scale/multi-phase bioprocesses. Further aided by the cognition of rheological behavior of biomass slurry, solute transfer theories, and enzyme kinetics, the coupling effects of flow-transfer-reaction are revealed under high-solid conditions. Based on the above basic features, this review lucidly explains the causes of high-solid hydrolysis hindrances, highlights the mismatched issues between transfer and reaction, and more importantly, presents the advanced strategies for transfer and reaction enhancements from the viewpoint of process optimization, reactor design, as well as enzyme/auxiliary additive customization.

45 multi-scale, multi-phase, enzymatic reaction↗

Pulse response analysis using the Y-procedure: A data science approach

We report that pulse response experiments can provide a wealth of data for transient kinetic studies of gas phase heterogeneous reactions, with the ability to paint a detailed picture of intrinsic reaction kinetics pertaining to complex catalytic mechanisms. A novel framework called the Y-Procedure was developed by Yablonsky et al. to extract information from non-steady-state kinetic data (Yablonsky et al., 2007). The Y-Procedure reconstructs the chemical transformation rate and gas composition in the catalytic zone with no a priori assumptions on the kinetic model and is used to relate changes in catalytic reaction rates and kinetic parameters to changes in a catalyst’s surface composition. This paper provides a detailed description of the data science work flow implemented in the Y-procedure through an experimental example of oxygen adsorption on platinum. Lastly, this powerful method, along with a robust list of pre-processing methodology, will enable deeper understanding of kinetic processes and mechanism to be derived from the TAP pulse response technique.

03 NATURAL GAS↗

Preparation, characterization, and photocatalytic studies on anatase nano-TiO{sub 2} at internal air lift circulating photocatalytic reactor

Graphical abstract: The micro morphological structure of the nano-TiO{sub 2} particles was also observed with TEM, as shown in figure. The TEM images clearly exhibited the homogeneous microstructure of particles with a size of around 10–15 nm. - Highlights: • Nano-TiO{sub 2} was prepared by complex techniques of sol–gel, micro-emulsion and solvent thermal. • The size of TiO{sub 2} was nano level and uniformity. • Nano-TiO{sub 2} exhibited high photo-catalytic activity at internal air lift circulating reactor. • The best nano-TiO{sub 2} dosage was obtained. - Abstract: Anatase nano-titania (TiO{sub 2}) powder was prepared by using a sol–gel process mediated in reverse microemulsion combined with a solvent thermal technique. The structures of the obtained TiO{sub 2} were characterized by TG-DSC, XRD, TEM. The photocatalytic decomposition of methylene blue (MB) on nano-TiO{sub 2} was studied by using an internal air lift circulating photocatalytic reactor. The results show that the anatase structure appears in the calcination temperature range of 400–510 °C, while the transformation of anatase into rutile takes place above 510 °C. The homogeneous microstructure of nano-TiO{sub 2} particles was obtained with a size of around 10–15 nm. In the photocatalytic performance, degradation process follows pseudo first order kinetics with different dosages of photocatalyst and initial MB concentrations and optimal TiO{sub 2} dosage is 0.1 g/L with neutral medium.

36 MATERIALS SCIENCE↗

Reacting CO 2 with Light Alkanes to Value-Added Products

Catalytic conversion of anthropogenic carbon dioxide (CO 2 ) into value-added products is a promising strategy to mitigate global carbon emissions. Concurrently, the shale gas revolution has provided an abundant supply of light alkanes (methane, ethane, propane, and butane), presenting a unique opportunity to employ these underutilized hydrocarbons as an effective, low-cost hydrogen source for CO 2 reduction. In this Perspective, we summarize past efforts, current state, and future opportunities for reacting CO 2 with light alkanes to generate a diverse range of value-added products. Compared with direct alkane conversion, the introduction of CO 2 fundamentally alters reaction thermodynamics and kinetics, enabling selective C–H and C–C bond activation while suppressing catalyst deactivation from coke formation. Building on decades of research in dry reforming and CO 2 -assisted dehydrogenation, recent advances in catalyst design have enabled CO 2 -assisted dehydrogenation processes that approach chemical equilibrium for the selective production of olefins and syngas. Importantly, advances in catalyst design and reactor engineering have further expanded the product scope beyond gas-phase (syngas and olefins) to include liquid-phase (oxygenates and aromatics), and solid-phase products (carbon nanomaterials). We highlight key catalyst design principles for controlling reaction pathways and discuss major challenges and opportunities in developing selective and versatile platforms for the simultaneous upgrading of CO 2 and light alkanes.

CO2↗

Oxidation Kinetics by Water Vapor of Nuclear Graphite Grade 2114

This report presents measurement results of oxidation rates by water vapor of nuclear graphite grade 2114 manufactured by Mersen, USA. This report completes kinetic study of chronic oxidation of grade 2114, of which partial data were compiled as a Letter Report in July 2017. The research is part of a broader program at Oak Ridge National Laboratory (ORNL) aiming at development of a comprehensive model for chronic oxidation of nuclear graphite in conditions relevant to operation of gas-cooled high-temperature reactors (HTGR). Grade 2114 is the fourth nuclear graphite investigated under this program. Experimental data measured at ORNL were analyzed in collaboration with Dr. Robert Mee (University of Tennessee, Knoxville) and graphite-specific parameters in the oxidation rate equation were determined. It was shown, once again, that the new Boltzmann-enhanced Langmuir-Hinshelwood (BLH) model recently proposed by ORNL is a better choice than the classical Langmuir-Hinshelwood (LH) model for prediction of chronic oxidation of graphite components during normal operation of HTGRs.

36 MATERIALS SCIENCE↗

Development of an Advanced Computational Model for OMCVD of Indium Nitride

An advanced computational model is being developed to predict the formation of indium nitride (InN) film from the reaction of trimethylindium (In(CH3)3) with ammonia (NH3). The components are introduced into the reactor in the gas phase within a background of molecular nitrogen (N2). Organometallic chemical vapor deposition occurs on a heated sapphire surface. The model simulates heat and mass transport with gas and surface chemistry under steady state and pulsed conditions. The development and validation of an accurate model for the interactions between the diffusion of gas phase species and surface kinetics is essential to enable the regulation of the process in order to produce a low defect material. The validation of the model will be performed in concert with a NASA-North Carolina State University project.

Cardelino, Carlos A.↗

Insights into Constraining Rate Coefficients in Fuel Oxidation Mechanisms Using Genetic Algorithm Optimization

Accurate fuel oxidation mechanisms can enable predictive capabilities that aid in advancing combustion technologies. High-level computational kinetics can yield reasonable rate coefficients with uncertainties, in some cases, below a factor of 2. Computed rate coefficients can be constrained further by optimizing against experimental data. Here, we explore the application of genetic algorithm (GA) optimization to constrain computed rate coefficients in complex fuel oxidation mechanisms in conjunction with temperature-dependent species mole fractions from jet-stirred reactor (JSR) measurements. Cyclohexane is a model candidate for understanding the reactivity of cyclic fuels. In this work, we optimize the rate coefficients of the most recent literature cyclohexane mechanism, which incorporates theoretically computed rate coefficients for the reaction networks stemming from the first and second O 2 addition pathways, against the experimental results of two separate literature JSR studies. Optimization consistency is evaluated by carrying out three GA optimizations: fitting to the temperature-dependent species mole fractions in each JSR experiment separately and simultaneously fitting the species mole fractions in both experiments. Local sensitivity analyses are used to identify five influential low-temperature oxidation reactions for optimization. Although the three optimizations do not yield identical rate coefficients, the direction of change in all five rate coefficients is consistent among the three optimizations. Performance of the models from the three optimizations is assessed against literature ignition delay times with differences in the level of agreement observed among the different optimizations. In conclusion, comparisons are made with our recent optimization work of a cyclopentane oxidation master-equation model against time-resolved species concentrations, and insights and improvements of the strategy for constraining rate coefficients using GA optimization are discussed.

33 ADVANCED PROPULSION SYSTEMS↗

Pyrolysis Pathways of the Furanic Ether 2-Methoxyfuran

Substituted furans, including furanic ethers, derived from nonedible biomass have been proposed as second-generation biofuels. In order to use these molecules as fuels, it is important to understand how they break apart thermally. In this work, a series of experiments were conducted to study the unimolecular and low-pressure bimolecular decomposition mechanisms of the smallest furanic ether, 2-methoxyfuran. Electronic structure (CBS-QB3) calculations indicate this substituted furan has an unusually weak O - CH 3 bond, approximately 190 kJ mol -1 (45 kcal mol -1 ); thus, the primary decomposition pathway is through bond scission resulting in CH 3 and 2-furanyloxy (O - C 4 H 3 O) radicals. Final products from the ring opening of the furanyloxy radical include 2 CO, HC$\equiv$CH, and H. The decomposition of methoxyfuran is studied over a range of concentrations (0.0025-0.1%) in helium or argon in a heated silicon carbide (SiC) microtubular flow reactor (0.66-1 mm i.d., 2.5-3.5 cm long) with reactor wall temperatures from 300 to 1300 K. Inlet pressures to the reactor are 150-1500 Torr, and the gas mixture emerges as a skimmed molecular beam at a pressure of approximately 10 μTorr. Products formed at early pyrolysis times (100 μs) are detected by 118.2 nm (10.487 eV) photoionization mass spectrometry (PIMS), tunable synchrotron VUV PIMS, and matrix infrared absorption spectroscopy. Secondary products resulting from H or CH 3 addition to the parent and reaction with 2-furanyloxy were also observed and include CH 2 =CH-CHO, CH 3 -CH=CH-CHO, CH 3 =CO-CH=CH 2 , and furanones; under the conditions in the reactor, we estimate these reactions contribute to at most 1-3% of total methoxyfuran decomposition. This work also includes observation and characterization of an allylic lactone radical, 2-furanyloxy (O-C 4 H 3 O), with the assignment of several intense vibrational bands in an Ar matrix, an estimate of the ionization threshold, and photoionization efficiency. A pressure-dependent kinetic mechanism is also developed to model the decomposition behavior of methoxyfuran and provide pathways for the minor bimolecular reaction channels that are observed experimentally.

09 BIOMASS FUELS↗

Determination of oxidation rates and volatile oxidation products for HTGR graphite matrix material exposed to steam atmospheres

High-temperature gas-cooled reactors (HTGRs) in operation use tristructural isotropic (TRISO) particles embedded in graphite and carbonized resin matrix to form the fuel element. This graphite matrix material serves as a supportive structural element, heat transfer medium, and neutron moderator. In HTGR designs, fuel compacts are exposed to helium coolant, which facilitates high outlet temperatures (750°C 2 O, 800°C 2 , and H 2 , are quantified in varied oxidant atmospheres using a coupled thermogravimetric analyzer and mass spectrometer. Furthermore, oxidation rates reported here for varied steam (H 2 O [g]) atmospheres are predominantly linear and comparable with literature values in the range of tested temperatures (800–1200°C). Changes in dominant matrix oxidation products from primarily CO to a mixture of CO, CO 2 , and H 2 were observed at higher temperatures (≥1000°C) and steam atmospheres (≥5 kPa pH 2 O). Kinetic data indicates that there was no shift in oxidation regime with chemical oxidation occurring at all temperatures and H2O (g) atmospheres tested. These data provide insight into the oxidation behavior of graphite matrix material and will inform future testing conditions, notably mixed atmospheric conditions, of HTGR fuel elements.

36 MATERIALS SCIENCE↗

Modeling of thermal and kinetic processes in non-equilibrium plasma ignition applied to a lean combustion engine

In recent years novel ignition systems have been developed to enable stable and efficient engine operations with lean mixtures. Among them, radio-frequency corona ignition systems create discharges that involve a much wider region compared to traditional spark, and produce non equilibrium plasma with high levels of active radicals and excited species. These devices considerably increase the early flame growth speed and extend stable operating limits. With the aim of expanding the knowledge on high efficiency lean-burn SI engines, this paper investigates and compares the combustion development generated by spark and corona ignitions through computational fluid dynamics, within the Reynolds-Averaged Navier-Stokes framework for turbulence modeling. In order to simultaneously take thermal and chemical effects into account, the Perfectly Stirred Reactor combustion model is used. Experimental data are also collected for validation in an optical access engine, for different mixture levels, from stoichiometric to very lean. Furthermore, the faster burn rate generated by the corona system in the initial stage of the combustion is well predicted by the simulations, in all the relative air-fuel ratio conditions. Remarkably, as the mixture becomes lean, simulations are able to capture the non-linear transition from fast to slow kernel growth, before a self-sustainable flame propagation is established. This correlates very well with the measured engine cyclic variability and the corresponding steep change in the duration of the flame kernel formation. Ultimately, this study highlights the important role of the atomic oxygen, as active radical, in promoting and enhancing the combustion initiated by a corona discharge, in addition to the volumetric ignition effect. By contrast, the validated simulations allow to explain that the high-temperature thermal plasma generated in a traditional spark discharge is insensitive to kinetic aspects.

42 ENGINEERING↗

Defect formation and bending properties in graphite under He atom implantation investigated by molecular dynamics method

The formation and evolution of radiation defects and their effects on bending property of a single graphite under low energy helium atom implantation have been studied at atomic scale through molecular dynamics simulations. Various simple interstitial and vacancy defects are observed during the implantation process, which is a function of incident energy and cross section of helium-carbon interaction. Large defects are observed after continuous helium atom implantations. The effects of incident energy on the density, size and distribution of defects are analyzed in detail. Furthermore, the kinetic evolution process of radiation defects at different annealing temperatures have also been simulated, including the migration, aggregation, transformation, coalescence, and self-healing. Here, the large defect clusters, crossing several carbon layers, have been confirmed to be the primary reasons that affect the bending property of graphite. All these results provide a new understanding for further applications of graphite in nuclear reactors.

Atomic implantation↗

Full cell simulation and the evaluation of the buffer system on air-cathode microbial fuel cell

This paper presents a computational model of a single chamber, air-cathode MFC. The model considers losses due to mass transport, as well as biological and electrochemical reactions, in both the anode and cathode half-cells. Computational fluid dynamics and Monod-Nernst analysis are incorporated into the reactions for the anode biofilm and cathode Pt catalyst and biofilm. The integrated model provides a macro-perspective of the interrelation between the anode and cathode during power production, while incorporating microscale contributions of mass transport within the anode and cathode layers. Model considerations include the effects of pH (H + /OH – transport) and electric field-driven migration on concentration overpotential, effects of various buffers and various amounts of buffer on the pH in the whole reactor, and overall impacts on the power output of the MFC. The simulation results fit the experimental polarization and power density curves well. Further, this model provides insight regarding mass transport at varying current density regimes and quantitative delineation of overpotentials at the anode and cathode. Altogether, this comprehensive simulation is designed to accurately predict MFC performance based on fundamental fluid and kinetic relations and guide optimization of the MFC system.

30 DIRECT ENERGY CONVERSION↗

Detailed kinetic modeling study of n -pentanol oxidation

To help overcome the world’s dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n -butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n -pentanol and n -hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailed kinetic model for n -pentanol based on modeling rules previously presented for n -butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n -pentanol conformation and to obtain C–H and C–C bond dissociation energies. In addition, the proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes.

30 DIRECT ENERGY CONVERSION↗

Structural Aspects of Neutron Survival Probabilities

The neutron survival probability (and related quantities including probabilities of extinction and initiation) is a central element of the broader stochastic theory of neutron populations and finds application in fields including reactor start-up, analysis of reactor power bursts and criticality accidents, and safeguards. In a full neutron transport formulation, the equation governing the single-neutron survival probability is a backward or adjoint-like integro-partial differential equation with the added complexity of being highly nonlinear. Analogous formulations of this equation exist in the context of many approximate theories of neutron transport, with the point kinetics formulation having received significant theoretical attention since the 1940s. This work continues this tradition by providing a novel analysis of the single-neutron survival probability equation using the tools of boundary layer theory. The analysis reveals that the “fully dynamic” solution of the single-neutron survival probability equation—and some key probability distributions derived from it—may be cast as a singular perturbation around the underlying quasi-static single-neutron probability of initiation. In this perturbation solution, the expansion parameter is the ratio of the neutron generation time to a macroscopic time scale characterizing the overall system evolution; this interpretation illuminates some of the fundamental structural aspects of neutron survival phenomena.

97 MATHEMATICS AND COMPUTING↗

Interactive computer modeling of combustion chemistry and coalescence-dispersion modeling of turbulent combustion

An interactive computer code for simulation of a high-intensity turbulent combustor as a single point inhomogeneous stirred reactor was developed from an existing batch processing computer code CDPSR. The interactive CDPSR code was used as a guide for interpretation and direction of DOE-sponsored companion experiments utilizing Xenon tracer with optical laser diagnostic techniques to experimentally determine the appropriate mixing frequency, and for validation of CDPSR as a mixing-chemistry model for a laboratory jet-stirred reactor. The coalescence-dispersion model for finite rate mixing was incorporated into an existing interactive code AVCO-MARK I, to enable simulation of a combustor as a modular array of stirred flow and plug flow elements, each having a prescribed finite mixing frequency, or axial distribution of mixing frequency, as appropriate. Further increase the speed and reliability of the batch kinetics integrator code CREKID was increased by rewriting in vectorized form for execution on a vector or parallel processor, and by incorporating numerical techniques which enhance execution speed by permitting specification of a very low accuracy tolerance.

Pratt, D. T.↗