Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRONG FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Quasi-decadal variability of the stratosphere: Influence of long-term solar ultraviolet variations

A multiple regression statistical model is applied to investigate the existence of upper-stratospheric ozone, temperature, and zonal wind responses to long-term (solar cycle) changes in solar ultraviolet radiation using 11.5 years of reprocessed Nimbus-7 Solar Backscattered Ultraviolet (SBUV) data and 12.4 years of National Meteorological Center (NMC) data. A positive solar cycle variation of independently measured ozone and temperature occurs with maximum amplitude near the low-latitude stratopause. The seasonal solar regression coefficients near 1 mb for both ozone and temperature occur at low latitudes supporting a role for photochemical and radiative forcing in their origin. Zonal wind perturbations that correlate with long-term solar ultraviolet variations are a strong function of season and pressure level. Above approximately 2 mbar, the largest solar-correlated zonal wind enhancements occur at middle winter latitudes near the time of winter solstice in both hemispheres. The Northern Hemisphere December enhancement at 1 mb was especially large, 23 +/- 9 m/s from solar minimum to maximum during the last solar cycle. The derived ozone, temperature, and zonal wind increases with increasing solar ultraviolet flux near the stratopause are larger than predicted by models that consider primarily photochemical and radiative processes. The higher ozone and temperature response amplitudes at low latitudes may be due to modified ozone transport and adiabatic temperature changes induced by the dynamical response. If the midlatitude winter solstice wind enhancements are solar induced, their high amplitudes require a positive feedback due to wave-mean flow interaction such that the planetary wave drag on the flow is reduced under solar maximum conditions.

Hood, L. L.↗

Aerothermodynamics of the Mars Global Surveyor Spacecraft

The aerothermodynamics characteristics of the Mars Global Surveyor spacecraft are investigated and reported. These results have been used by the Mars Global Surveyor mission planners to design the aerobraking phase of the mission. Analytical and Direct Simulation Monte Carlo computer codes were used with a detailed, three dimensional model of the spacecraft to evaluate spacecraft aerobraking characteristics for flight in free molecular and transitional flow regimes. The spacecraft is found to be aerodynamically stable in aerobraking and planned contingency configurations. Aerodynamic forces, moments, and heating are found to be highly dependent on atmospheric density. Accommodation coefficient. is seen to strongly influence drag coefficient. Transitional flow effects are found to reduce overall solar panel heating. Attitude control thruster plumes are shown to interact with the freestream, diminishing the effectiveness of the attitude control system and even leading to thrust reversal. These plume-freestream interaction effects are found to be highly dependent on freestream density.

Shane, Russell W.↗

Cross Scale Coupling of Alfven Turbulence in the Polar Wind Region

Ionosphere-magnetosphere coupling phenomena are extremely complex and diverse, involving a whole series of processes operating over a wide range of spatial and temporal scales. One of the fundamental aspects of understanding this coupling is the polar wind, which is a dominant mechanism of mass transport from the ionospheric source region to the magnetosphere and strongly influences the plasma parameters above the F2 density peak. The combined effects of photoelectrons, and the ponderomotive force will be presented based on our polar wind model. The presence of photoelectrons and low frequency oscillations (that create the ponderomotive force) increase ion outflows. It is also demonstrated that large-amplitude low-frequency waves (LFW) may generate lower hybrid waves (LHW) in the auroral zone. The excitation of LHW by a LF wave may lead to the appearance of an additional channel of energy transfer from, for example, Alfven or fast magnetosonic waves, to particles. This process then influences the formation of the plasma distribution function at the expense of acceleration in the tail of the distribution during the collapse of the LHW. The ion energization due to the LHW can be comparable with that produced by the ponderomotive force of the LFW.

Khazanov, George V.↗

"Hypothetical" Heavy Particles Dynamics in LES of Turbulent Dispersed Two-Phase Channel Flow

The extensive experimental study of dispersed two-phase turbulent flow in a vertical channel has been performed in Eaton's research group in the Mechanical Engineering Department at Stanford University. In Wang & Squires (1996), this study motivated the validation of LES approach with Lagrangian tracking of round particles governed by drag forces. While the computed velocity of the flow have been predicted relatively well, the computed particle velocity differed strongly from the measured one. Using Monte Carlo simulation of inter-particle collisions, the computation of Yamamoto et al. (2001) was specifically performed to model Eaton's experiment. The results of Yamamoto et al. (2001) improved the particle velocity distribution. At the same time, Vance & Squires (2002) mentioned that the stochastic simualtion of inter-particle collisions is too expensive, requiring significantly more CPU resources than one needs for the gas flow computation. Therefore, the need comes to account for the inter-particle collisions in a simpler and still effective way. To present such a model in the framework of LES/Lagrangian particle approach, and to compare the calculated results with Eaton's measurement and modeling of Yamamoto is the main objective of the present paper.

Gorokhovski, M.↗

Cloud Forcing and the Earth's Radiation Budget: New Ideas and New Observations

1. NEW PERSPECTIVES ON CLOUD-RADIATIVE FORCING. When the Earth Radiation Budget Experiment (ERBE) produced the first measurements of cloud-radiative forcing, the climate community interpreted the results from a context in which the atmosphere was a single column, strongly coupled to the Earth's surface. 2. NEW PERSPECTIVES ON CLOUD-RADIATION OBSERVATIONS. The climate community is also on the verge of adding a new dimension to its observational capability. In classic thinking about atmospheric circulation and climate, surface pressure was a readily available quantity. As meteorology developed, it was possible to develop quantitative predictions of future weather by bringing together a network of surface pressure observations and then of profiles of temperature and humidity obtained from balloons. 3. ON COMBINING OBSERVATIONS AND THE - ORY. With this new capability, it is natural to seek recognizable features in the observations we make of the Earth. There are techniques we can use to group the remotely sensed data in the individual footprints into objects that we can track. We will present one such image-processing application to radiation budget data, showing how we can interpret the radiation budget data in terms of cloud systems that are organized into systematic patterns of behavior - an ecosystem-like view of cloud behavior.

Barkstrom, Bruce R.↗

Light from Exoplanets: Present and Future

Measurements using the Spitzer Space Telescope have revealed thermal emission from planets orbiting very close to solar-type stars, primarily transiting "hot Jupiter" exoplanets. The thermal emission spectrum of these worlds has been measured by exploiting their secondary eclipse. Also, during transit of the planet, absorption signatures from atoms and molecules in the planet's atmosphere are imprinted onto the spectrum of the star. Results to date from transit and eclipse studies show that the hot Jupiters often have significant haze and cloud components in their atmospheres, and the temperature structure can often be inverted, i.e. temperature is rising with height. New and very strongly irradiated examples of hot Jupiters have been found that are being stripped of their atmospheres by tidal forces from the star. In parallel, transiting superEarth exoplanets are being discovered, and their atmospheres should also be amenable to study using transit techniques. The 2014 launch of the James Webb Space Telescope will clarify the physical nature of hot Jupiters, and will extend transit and eclipse studies to superEarths orbiting in the habitable zones of lower main sequence stars.

Deming, Leo↗

The Coupled Mars Dust and Water Cycles: Understanding How Clouds Affect the Vertical Distribution and Meridional Transport of Dust and Water.

The dust and water cycles are crucial to the current Martian climate, and they are coupled through cloud formation. Dust strongly impacts the thermal structure of the atmosphere and thus greatly affects atmospheric circulation, while clouds provide radiative forcing and control the hemispheric exchange of water through the modification of the vertical distributions of water and dust. Recent improvements in the quality and sophistication of both observations and climate models allow for a more comprehensive understanding of how the interaction between the dust and water cycles (through cloud formation) affects the dust and water cycles individually. We focus here on the effects of clouds on the vertical distribution of dust and water, and how those vertical distributions control the net meridional transport of water. For this study, we utilize observations of temperature, dust and water ice from the Mars Climate Sounder (MCS) on the Mars Reconnaissance Orbiter (MRO) combined with the NASA ARC Mars Global Climate Model (MGCM). We demonstrate that the magnitude and nature of the net meridional transport of water between the northern and southern hemispheres during NH summer is sensitive to the vertical structure of the simulated aphelion cloud belt. We further examine how clouds influence the atmospheric thermal structure and thus the vertical structure of the cloud belt. Our goal is to identify and understand the importance of radiative/dynamic feedbacks due to the physical processes involved with cloud formation and evolution on the current climate of Mars.

Martian climate↗

Preliminary Analysis of the Gradient Field Imploding Liner Fusion Propulsion Concept

NIAC Phase I study takes advantage of ground-based research in Magnetoinertial Fusion (MIF). Pulsed current in an external coil generates strong axial magnetic field, induces azimuthal current in target liner. Radial j (sub theta) B (sub z) Lorentz force implodes the liner to compress the target fuel. At maximum compression, pressure is balanced between the stagnating liner material, external magnetic field, trapped internal magnetic field, and fuel pressure. Multiple approaches: Z-pinch, theta-pinch, Liner-driven FRC, etc. Energy storage, resistive coil, pulse repetition all present challenges.

Fusion; Propulsion; Exploration↗

Intense Equatorial Electrojet and Counter Electrojet caused by the 15 January 2022 Tonga Volcanic Eruption: Space and Ground-based Observations

Abstract Text: We present space and ground-based multi-instrument observations demonstrating the impact of the 2022 Tonga volcanic eruption on dayside equatorial electrodynamics. A strong counter electrojet (CEJ) was observed by Swarm and ground-based magnetometers on 15 January after the Tonga eruption and during the recovery phase of a moderate geomagnetic storm. Swarm also observed an enhanced equatorial electrojet (EEJ) preceding the CEJ in the previous orbit. The observed EEJ and CEJ exhibited complex spatiotemporal variations. We combine them with the Ionospheric Connection Explorer (ICON) neutral wind measurements to disentangle the potential mechanisms. Our analysis indicates that the geomagnetic storm had minimal impact; instead, a large-scale atmospheric disturbance propagating eastward from the Tonga eruption site was the most likely driver for the observed intensification and directional reversal of the equatorial electrojet. The CEJ was associated with strong eastward zonal winds in the E-region ionosphere, as a direct response to the lower atmosphere forcing. Plain-Language Summary: The Earth's E-region ionosphere (~100-150 km altitude) consists of both ionized and neutral gasses, and the two components are coupled through ion-neutral collisions. The state of this region is closely influenced by neutral atmospheric activities from the lower atmosphere and the variability of the solar drivers. On 15 January 2022, the Tonga volcano had a massive eruption and injected an enormous amount of mass and energy into the atmosphere causing disturbances in the E-region ionosphere or even higher. There was also a moderate geomagnetic storm that started one day before the eruption and ended days after. These conditions offer a unique opportunity to understand the different roles they play in controlling the ionosphere. Coordinated observations including the atmosphere, ionosphere and magnetosphere were made from both space and on the ground during this event. We analyzed the magnetic field and neutral wind data and found that a large-scale atmospheric disturbance generated by the volcano eruption was responsible for the observed directional reversal of the dayside equatorial electric field and electric current.

Guan Le↗

Measurement and calculation of levitation forces between magnets and granular superconductors

Recent developments indicate that exploitation of the phenomenon of magnetic levitation may become one of the most important near-term applications of high-T(sub c) superconductivity. Because of this, the interaction between a strong permanent magnet(PM) and bulk high-T(sub c) superconductor (HTSC) is currently a subject of much interest. We have studied central features of the mechanics of PM-HTSC systems of simple geometries. Here we report experimental results for the components of the levitation force, their associated stiffness and mechanical ac-loss. To analyze the observed behavior a theoretical framework based on critical-state considerations is developed. It will be shown that all the mechanical properties can be explained consistently at a quantitative level wing a minimum of model parameters.

Johansen, T. H.↗

How Useful Are Common Simulants of Chemical Warfare Agents at Predicting Adsorption Behavior?

We report that nanoporous materials such as metal–organic frameworks (MOFs) have attractive properties for selective capture of chemical warfare agents (CWAs). For obvious reasons, most research on adsorption of CWAs is performed with simulant molecules rather than real agents. This paper examines how effectively common CWA simulants mimic the adsorption properties of sarin and soman. To this end, we perform molecular simulations in the dilute adsorption limit for four simulants [dimethyl methylphosphonate (DMMP), diethyl chlorophosphate (DCP), diisopropyl fluorophosphate, and dimethyl p-nitrophenyl phosphate (DMNP)] and sarin and soman in a set of 2969 MOFs with experimentally known crystal structures. To establish the robustness of the conclusions with respect to the force field used in these simulations, each system was examined with two independent force fields, a “generic” force field and a density functional theory (DFT)-derived force field we established based on extensive dispersion-corrected DFT calculations of adsorption in the well-known MOF UiO-66. Our results show that when judging the performance of adsorbents using the heat of adsorption, DCP and DMMP are the best simulants for the adsorption of sarin, while DMNP is the best simulant for soman. The adsorption properties of DCP or DMMP show a strong correlation with sarin over a range of MOFs, but the correlation between DMNP and soman is considerably weaker. Finally, comparisons of results with both force fields indicate that our main conclusions are robust with respect to the force field used to define adsorbate–MOF interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale Switching Characteristics of Nearly Tetragonal BiFeO3 Thin Films

We have investigated the nanoscale switching properties of strain-engineered BiFeO3 thin films deposited on LaAlO3 substrates using a combination of scanning probe techniques. Polarized Raman spectral analysis indicates that the nearly tetragonal films have monoclinic (Cc) rather than P4mm tetragonal symmetry. Through local switching-spectroscopy measurements and piezoresponse force microscopy, we provide clear evidence of ferroelectric switching of the tetragonal phase, but the polarization direction, and therefore its switching, deviates strongly from the expected (001) tetragonal axis. We also demonstrate a large and reversible, electrically driven structural phase transition from the tetragonal to the rhombohedral polymorph in this material, which is promising for a plethora of applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Determination of natural frequencies by coupled method of homotopy perturbation and variational method for strongly nonlinear oscillators

In this paper a new approach combining the features of the homotopy concept with variational approach is proposed to find accurate analytical solutions for nonlinear oscillators with and without a fractional power restoring force. Since the first-order approximation leads to very accurate results, comparisons with other results are presented to show the effectiveness of this method. The validity of the method is independent of whether or not there exist small or large parameters in the considered nonlinear equations; the obtained results prove the validity and efficiency of the method, which can be easily extended to other strongly nonlinear problems. At the end we compare our procedure with the optimal homotopy perturbation method.

97 MATHEMATICS AND COMPUTING↗

Dynamics of hypersonic flight vehicles exhibiting significant aeroelastic and aeropropulsive interactions

With analytic expressions previously developed for the forces and moments acting on a generic hypersonic vehicle, it is of interest to investigate the relative importance of the aerodynamic and propulsive effects on the vehicle dynamics. It is shown that the vehicle's aerodynamics and propulsive forces are both very significant in the evaluation of key stability derivatives which dictate the vehicle's dynamic characteristics. It is also shown that the vehicle model selected is unstable in pitch and exhibits strong airframe/engine/elastic coupling. With the use of literal expressions for both the systems poles and zeros, as well as the stability derivatives, key vehicle dynamic characteristics are investigated. For small errors, or uncertainties, in either the aerodynamic or propulsive forces, significant errors in the frequency and damping of the dominant modes and zero locations will arise.

Chavez, Frank R.↗

Turbulent Compressible Convection with Rotation: Mean Flows and Differential Rotation - 2

The effects of rotation on turbulent, compressible convection within stellar envelopes are studied through three-dimensional numerical simulations conducted within a local f-plane model. This work seeks to understand the types of differential rotation that can be established in convective envelopes of stars like the Sun, for which recent helioseismic observations suggest an angular velocity profile with depth and latitude at variance with many theoretical predictions. This paper analyzes the mechanisms that are responsible for the mean (horizontally averaged) zonal and meridional flows that are produced by convection influenced by Coriolis forces. The compressible convection is considered for a range of Rayleigh, Taylor, and Prandtl (and thus Rossby) numbers encompassing both laminar and turbulent flow conditions under weak and strong rotational constraints. When the nonlinearities are moderate, the effects of rotation on the resulting laminar cellular convection leads to distinctive tilts of the cell boundaries away from the vertical. These yield correlations between vertical and horizontal motions that generate Reynolds stresses that can drive mean flows, interpretable as differential rotation and meridional circulations. Under more vigorous forcing, the resulting turbulent convection involves complicated and contorted fluid particle trajectories, with few clear correlations between vertical and horizontal motions, punctuated by an evolving and intricate downflow network that can extend over much of the depth of the layer. Within such networks are some coherent structures of vortical downflow that tend to align with the rotation axis. These yield a novel turbulent alignment mechanism, distinct from the laminar tilting of cellular boundaries, that can provide the principal correlated motions and thus Reynolds stresses and subsequently mean flows. The emergence of such coherent structures that can persist amidst more random motions is a characteristic of turbulence with symmetries broken by rotation and stratification. Such structure is here found to play a crucial role in defining the mean zonal and meridional flows that coexist with the convection. Though they are subject to strong inertial oscillations, the strength and type of the mean flows are determined by a combination of the laminar tilting and the turbulent alignment mechanisms. Varying the parameters produces a wide range of mean motions. Among these, some turbulent solutions exhibit a mean zonal velocity profile that is nearly constant with depth, much as deduced by helioseismology at midlatitudes within the Sun. The solutions exhibit a definite handedness, with the direction of the persistent mean flows often prescribing a spiral with depth near the boundaries, also in accord with helioseismic deductions. The mean helicity has a profile that is positive in the upper portion of the domain and negative in the lower portion, a property bearing on magnetic dynamo processes that may be realized within such rotating layers of turbulent convection.

Brummell, Nicholas H.↗

An analysis of the wear behavior of SiC whisker reinforced alumina from 25 to 1200 C

A model is described for predicting the wear behavior of whisker reinforced ceramics. The model was successfully applied to a silicon carbide whisker reinforced alumina ceramic composite subjected to sliding contact. The model compares the friction forces on the whiskers due to sliding, which act to pull or push them out of the matrix, to the clamping or compressive forces on the whiskers due to the matrix, which act to hold the whiskers in the composite. At low temperatures, the whiskers are held strongly in the matrix and are fractured into pieces during the wear process along with the matrix. At elevated temperatures differential thermal expansion between the whiskers and matrix can cause loosening of the whiskers and lead to pullout during the wear process and to higher wear. The model, which represents the combination of elastic stress analysis and a friction heating analysis, predicts a transition temperature at which the strength of the whiskers equals the clamping force holding them in the matrix. Above the transition the whiskers are pulled out of the matrix during sliding, and below the transition the whiskers are simply fractured. The existence of the transition gives rise to a dual wear mode or mechanism behavior for this material which was observed in laboratory experiments. The results from this model correlate well with experimentally observed behavior indicating that the model may be useful in obtaining a better understanding of material behavior and in making material improvements.

Dellacorte, Christopher↗

An analysis of the wear behavior of SiC whisker-reinforced alumina from 25 to 1200 C

A model is described for predicting the wear behavior of whisker reinforced ceramics. The model was successfully applied to a silicon carbide whisker reinforced alumina ceramic composite subjected to sliding contact. The model compares the friction forces on the whiskers due to sliding, which act to pull or push them out of the matrix, to the clamping or compressive forces on the whiskers due to the matrix, which act to hold the whiskers in the composite. At low temperatures, the whiskers are held strongly in the matrix and are fractured into pieces during the wear process along with the matrix. At elevated temperatures differential thermal expansion between the whiskers and matrix can cause loosening of the whiskers and lead to pullout during the wear process and to higher wear. The model, which represents the combination of elastic stress analysis and a friction heating analysis, predicts a transition temperature at which the strength of the whiskers equals the clamping force holding them in the matrix. Above the transition the whiskers are pulled out of the matrix during sliding, and below the transition the whiskers are simply fractured. The existence of the transition gives rise to a dual wear mode or mechanism behavior for this material which was observed in laboratory experiments. The results from this model correlate well with experimentally observed behavior indicating that the model may be useful in obtaining a better understanding of material behavior and in making material improvements.

Dellacorte, Christopher↗

Gravitational self-force on a particle in eccentric orbit around a Schwarzschild black hole

We present a numerical code for calculating the local gravitational self-force acting on a pointlike particle in a generic (bound) geodesic orbit around a Schwarzschild black hole. The calculation is carried out in the Lorenz gauge: For a given geodesic orbit, we decompose the Lorenz-gauge metric perturbation equations (sourced by the delta-function particle) into tensorial harmonics, and solve for each harmonic using numerical evolution in the time domain (in 1+1 dimensions). The physical self-force along the orbit is then obtained via mode-sum regularization. The total self-force contains a dissipative piece as well as a conservative piece, and we describe a simple method for disentangling these two pieces in a time-domain framework. The dissipative component is responsible for the loss of orbital energy and angular momentum through gravitational radiation; as a test of our code we demonstrate that the work done by the dissipative component of the computed force is precisely balanced by the asymptotic fluxes of energy and angular momentum, which we extract independently from the wave-zone numerical solutions. The conservative piece of the self-force does not affect the time-averaged rate of energy and angular-momentum loss, but it influences the evolution of the orbital phases; this piece is calculated here for the first time in eccentric strong-field orbits. As a first concrete application of our code we recently reported the value of the shift in the location and frequency of the innermost stable circular orbit due to the conservative self-force [Phys. Rev. Lett. 102, 191101 (2009)]. Here we provide full details of this analysis, and discuss future applications.

79 ASTRONOMY AND ASTROPHYSICS↗