Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar angles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Evacuated-tube solar collector--performance evaluation

Report gives thermal performance test procedures and results for commercially produced, water-filled, 8-tube collectors. Tests include efficiency, time constant for temperature drop after solar flux is cut, change in efficiency as function of sun angle, and test to see if tubes break when filled with hot water.

Source record↗

Simulated response of a multispectral scanner over wheat as a function of wavelength and view/illumination directions

Oblique viewing sensors are to be launched in the late 1980's on the Multispectral Resource Sampler, being developed by the U.S. Since the resulting oblique measurements will need to be better understood, the reflectance response with a view angle of wheat, excluding atmospheric effects but simulating the response of a multispectral scanner, is analyzed. Spectra were taken continuously in the wavelength range of 0.45 to 2.4 microns at more than 1200 view/illumination directions with a 20 C spectral radiometer, and data were acquired six meters above four wheat canopies, each at a different stage of growth. The study shows that the canopy reflective response is a function of the illumination angle, the scanner view angle, and the wavelength; and the variation is greater at low solar variations.

Vanderbilt, V. C.↗

Aerosol sensing from balloons using photopolarimetry

A photopolarimeter designed to measure the radiance and the polarization ratio at lambda equals 0.85 microns and lambda equals 1.65 microns is set up on a gondola of a stratospheric balloon. By rotating the gondola, measurements of the diffuse solar light are obtained for a wide range of the scattering angles. An inversion scheme, based on the assumption of a log-normal size distribution, provides the relevant size parameters, the refractive index, and the slant optical thicknesses of the aerosols. Since 1983, this experiment was launched twice a year from Aire Sur Adour (S-E of France). The post-El Chichon atmospheric stratospheric aerosol proved to be quite stable in size and nature (hydratid sulfuric acid), but the abundance decreased by a factor of 10 between 1983 and 1987. The experiment was also launched to observe the stratosphere during the Arctic winter. Two flights, on January 28, 1988 and January 18, 1990, corresponded to an unperturbed atmosphere. But during a third flight, on April, 2, 1990, the temperatures were low enough for PCS formulations. A multilayer situation was observed with the standard H2SOH aerosols below 20 km; a dense layer was observed, peaked at around 23 km, with scattering coefficients about 50 times layer than in background conditions; and an upper layer was observed, rather sharp (approximately equal to 1 km), with micron sized particles.

Santer, R.↗

Topographic distribution of clear-sky radiation over the Konza Prairie, Kansas

A method for exploring the topographic modulation of clear-sky incoming radiation using a two-stream atmospheric model together with digital elevation data is presented to obtain the temporal and spatial distribution of this energy. Utilizing this methodology for the Konza Prairie, it is observed that the variance and spatial autocorrelation of the simulated radiation data changed with sun angle and elevation grid spacing. An analytical formula that describes the behavior of the variance as a function of optical depth, sun angle, and mean terrain slope can be developed by considering direct solar radiation variability on a constant-slope terrain which has a uniform albedo and a uniform distribution of slopes. The decrease in mean slope and the increase in slope and autocorrelation is attributed to a loss of some of the shorter-wavelength terrain features at coarser grid spacings.

Dubayah, Ralph↗

High-energy gamma-ray emission from pion decay in a solar flare magnetic loop

The production of high-energy gamma rays resulting from pion decay in a solar flare magnetic loop is investigated. Magnetic mirroring, MHD pitch-angle scattering, and all of the relevant loss processes and photon production mechanisms are taken into account. The transport of both the primary ions and the secondary positrons resulting from the decay of the positive pions, as well as the transport of the produced gamma-ray emission are considered. The distributions of the gamma rays as a function of atmospheric depth, time, emission angle, and photon energy are calculated and the dependence of these distributions on the model parameters are studied. The obtained angular distributions are not sufficiently anisotropic to account for the observed limb brightening of the greater than 10 MeV flare emission, indicating that the bulk of this emission is bremsstrahlung from primary electrons.

Mandzhavidze, Natalie↗

Pickup protons and water ions at Comet Halley - Comparisons with Giotto observations

The cometary ion pickup process along the sun-comet line at Comet Halley is investigated using a quasi-linear diffusion model including both pitch angle and energy diffusion, adiabatic compression, and convective motion with the solar wind flow. The model results are compared with energetic ion distributions observed by instruments on board the Giotto spacecraft. The observed power spectrum index of magnetic turbulence (gamma) is 2-2.5. The present simulation shows that when gamma was 2, the calculated proton distributions were much more isotropic than the observed ones. The numerical solutions of the quasi-linear diffusion equations show that the isotropization of the pickup ion distribution, particularly at the pickup velocity, is not complete even close to the bow shock. Given the observed turbulence level, quasi-linear theory yields pickup ion energy distributions that agree with the observed ones quite well and easily produces energetic ions with energies up to hundreds of keV.

Ye, G.↗

The Use, Evolution and Lessons Learnt of Deployable Static Solar Array Mechanisms

This paper focuses on the mechanisms incorporated into SSTL's static deployable arrays; namely the sprung-hinges and hold down and release mechanism (HDRM). Combined, the HDRM and hinges form the hold down release system (HDRS). The deployable static solar array HDRS has been successfully used on several missions, first launched upon the DMC-CFESAT spacecraft in 2007 for a U.S. customer (Figure 1), and later used on DMC-UK2 and EXACTVIEW-1 launched in 2009 and 2012, respectively. The simple, robust and low-cost solution HDRS has been evident in allowing missions to satisfy an ever increasing power demand, allowing the solar arrays to increase in size and have a preferable sun angle for increased cell efficiency. The system is now being employed on the first mission out of SSTL's U.S. office (SST-US) on the Orbital Test Bed platform. This paper shall cover details of the original design and development program, problems incurred on latter missions, and evolution of the HDRS for the present Orbital Test Bed mission. Both the original development and recent evolutions have taken place in rapid timescales, to satisfy the high-turnaround of SSTL missions.

Ferris, Mark↗

Photosynthetic Efficiency of Northern Forest Ecosystems Using a MODIS-Derived Photochemical Reflectance Index (PRI)

This study evaluates a direct remote sensing approach from space for the determination of ecosystem photosynthetic light use efficiency (LUE), through measurement of vegetation reflectance changes expressed with the Photochemical Reflectance Index (PRI). The PRI is a normalized difference index based on spectral changes at a physiologically active wavelength (approximately 531 nanometers) as compared to a reference waveband, and is only available from a very few satellites. These include the two Moderate-Resolution Imaging Spectroradiometers (MODIS) on the Aqua and Terra satellites each of which have a narrow (10-nanometer) ocean band centered at 531 nanometers. We examined several PRI variations computed with candidate reference bands, since MODIS lacks the traditional 570-nanometer reference band. The PRI computed using MODIS land band 1 (620-670 nanometers) gave the best performance for daily LUE estimation. Through rigorous statistical analyses over a large image collection (n equals 420), the success of relating in situ daily tower-derived LUE to MODIS observations for northern forests was strongly influenced by satellite viewing geometry. LUE was calculated from CO2 fluxes (moles per moles of carbon absorbed quanta) measured at instrumented Canadian Carbon Program flux towers in four Canadian forests: a mature fir site in British Columbia, mature aspen and black spruce sites in Saskatchewan, and a mixed deciduous/coniferous forest site in Ontario. All aspects of the viewing geometry had significant effects on the MODIS-PRI, including the view zenith angle (VZA), the view azimuth angle, and the displacement of the view azimuth relative to the solar principal plane, in addition to illumination related variables.Nevertheless, we show that forward scatter sector views (VZA, 16 degrees-45 degrees) provided the strongest relationships to daily LUE, especially those collected in the early afternoon by Aqua (r squared = 0.83, RMSE (root mean square error) equals 0.003 moles per moles of carbon absorbed quanta). Nadir (VZA, 0 degrees plus or minus 15 degrees) and backscatter views (VZA, −16 degrees to −45 degrees) had lower performance in estimating LUE (nadir: r squared approximately equal to 0.62-0.67; backscatter: r squared approximately equal to 0.54-0.59) and similar estimation error (RMSE equals 0.004-0.005).When directional effects were not considered, only a moderately successful MODIS-PRI vs. LUE relationship (r squared equals 0.34, RMSE equals 0.007) was obtained in the full dataset (all views & sites, both satellites), but site-specific relationships were able to discriminate between coniferous and deciduous forests. Overall, MODIS-PRI values from Terra (late morning) were higher than those from Aqua (early afternoon), before/after the onset of diurnal stress responses expressed spectrally. Therefore, we identified ninety-two Terra-Aqua "same day" pairs, for which the sum of Terra morning and Aqua afternoon MODIS-PRI values (PRI (sub sum) using all available directional observations was linearly correlated with daily tower LUE (r squared equals 0.622, RMSE equals 0.013) and independent of site differences or meteorological information. Our study highlights the value of off-nadir directional reflectance observations, and the value of pairing morning and afternoon satellite observations to monitor stress responses that inhibit carbon uptake in Canadian forest ecosystems. In addition, we show that MODIS-PRI values, when derived from either: (i) forward views only, or (ii) Terra/Aqua same day (any view) combined observations, provided more accurate estimates of tower-measured daily LUE than those derived from either nadir or backscatter views or those calculated by the widely used semi-operational MODIS GPP model (MOD17) which is based on a theoretical maximum LUE and environmental data. Consequently, we demonstrate the importance of diurnal as well as off-nadir satellite observations for detecting vegetation physiological processes.

Middleton, E. M.↗

Suction-recirculation device for stabilizing particle flows within a solar powered solid particle receiver

A suction-recirculation device for stabilizing the flow of a curtain of blackened heat absorption particles falling inside of a solar receiver with an open aperture. The curtain of particles absorbs the concentrated heat from a solar mirror array reflected up to the receiver on a solar power tower. External winds entering the receiver at an oblique angle can destabilize the particle curtain and eject particles. A fan and ductwork is located behind the back wall of the receiver and sucks air out through an array of small holes in the back wall. Any entrained particles are separated out by a conventional cyclone device. Then, the air is recirculated back to the top of the receiver by injecting the recycled air through an array of small holes in the receiver's ceiling and upper aperture front wall. Since internal air is recirculated, heat losses are minimized and high receiver efficiency is maintained. Suction-recirculation velocities in the range of 1-5 m/s are sufficient to stabilize the particle curtain against external wind speeds in excess of 10 m/s.

47 OTHER INSTRUMENTATION↗

Spatial confinement of the IBEX Ribbon: A dominant turbulence mechanism

The narrow ribbon of enhanced energetic neutral atom flux observed by the Interstellar Boundary Explorer spacecraft has prompted numerous ideas to explain its structure and properties. One of these ideas is the 'neutral solar wind' scenario, which identifies the source particles as pickup protons in the local interstellar medium originating in solar wind charge-exchange interactions. This scenario has been thought to require unrealistically weak pitch-angle scattering of the pickup protons to explain the narrow structure. Recently, Schwadron and McComas suggested that this structure could result from a spatial retention of the pickup protons, rather than from a restricted pitch-angle distribution. Here, we present a physically motivated, quantitative mechanism to produce such a spatial configuration. This mechanism is based on the 'dominant turbulence' assumption, which can be applied where the production of new pickup protons is slow, and has been used to successfully explain the level of turbulent heating observed in the outer solar wind. This formalism predicts a pickup isotropization process which adds or subtracts energy from the ambient turbulent fluctuations, depending on the initial pitch angle of the pickup protons. We show that a simple model of this process can yield a ribbon structure in qualitative agreement with the observations. The results of this simple model are not yet quantitatively satisfactory, but we suggest several improvements which may reduce the quantitative discrepancy.

79 ASTRONOMY AND ASTROPHYSICS↗

Efficient Solar Concentrators: Affordable Energy from Water and Sunlight

Broad Funding Opportunity Announcement Project: Teledyne is developing a liquid prism panel that tracks the position of the sun to help efficiently concentrate its light onto a solar cell to produce power. Typically, solar tracking devices have bulky and expensive mechanical moving parts that require a lot of power and are often unreliable. Teledyne’s liquid prism panel has no bulky and heavy supporting parts—instead it relies on electrowetting. Electrowetting is a process where an electric field is applied to the liquid to control the angle at which it meets the sunlight above and to control the angle of the sunlight to the focusing lensthe more direct the angle to the focusing lens, the more efficiently the light can be concentrated to solar panels and converted into electricity. This allows the prism to be tuned like a radio to track the sun across the sky and steer sunlight into the solar cell without any moving mechanical parts. This process uses very little power and requires no expensive supporting hardware or moving parts, enabling efficient and quiet rooftop operation for integration into buildings.

ARPA-E↗

Instrument for Measuring Temperature of Water

A pseudo-Brewster-angle infrared radiometer has been proposed for use in noncontact measurement of the surface temperature of a large body of water (e.g., a lake or ocean). This radiometer could be situated on a waterborne, airborne, or spaceborne platform. The design of the pseudo-Brewster-angle radiometer would exploit the spectral-emissivity and polarization characteristics of water to minimize errors attributable to the emissivity of water and to the reflection of downwelling (e.g., Solar and cloud-reflected) infrared radiation. The relevant emissivity and polarization characteristics are the following: . The Brewster angle is the angle at which light polarized parallel to the plane of incidence on a purely dielectric material is not reflected. The pseudo-Brewster angle, defined for a lossy dielectric (somewhat electrically conductive) material, is the angle for which the reflectivity for parallel-polarized light is minimized. For pure water, the reflectivity for parallel-polarized light is only 2.2 x 10(exp -4) at its pseudo- Brewster angle of 51deg. The reflectivity remains near zero, several degrees off from the 51deg optimum, allowing this angle of incidence requirement to be easily achieved. . The wavelength range of interest for measuring water temperatures is 8 to 12 microns. The emissivity of water for parallel- polarized light at the pseudo-Brewster angle is greater than 0.999 in this wavelength range. The radiometer would be sensitive in the wavelength range of 8 to 12 microns, would be equipped with a polarizer to discriminate against infrared light polarized perpendicular to the plane of incidence, and would be aimed toward a body of water at the pseudo- Brewster angle (see figure). Because the infrared radiation entering the radiometer would be polarized parallel to the plane of incidence and because very little downwelling parallel-polarized radiation would be reflected into the radiometer on account of the pseudo-Brewster arrangement, the radiation received by the radiometer would consist almost entirely of thermal emission from the surface of the water. Because the emissivity of the water would be very close to 1, the water could be regarded as a close approximation of a blackbody for the purpose of computing its surface temperature from the radiometer measurements by use of the Planck radiation law.

Ryan, Robert↗

Deexcitation gamma-ray line emission from solar flare magnetic loops

A Monte Carlo simulation that follows individual ions throughout a solar flare magnetic loop is developed. Included are energy losses due to Coulomb collisions, removal by nuclear reactions, magnetic mirroring in the convergent flux tubes, and MHD pitch-angle scattering in the corona. Calculations are made of the depth distribution of nuclear deexcitation line production, the time dependence of the production of the lines, and the escape probability of the line photons from the solar atmosphere. It is found that the inclusion of mirroring and pitch-angle scattering leads to time profiles which are in good agreement with observations. This suggests that the decaying portions of the time profiles of gamma-ray emission observed from solar flares could be governed by transport and not by acceleration.

Hua, X.-M.↗

Wide acceptance angle, high concentration ratio, optical collector

The invention is directed to an optical collector requiring a wide acceptance angle, and a high concentration ratio. The invention is particularly adapted for use in solar collectors of cassegrain design. The optical collector system includes a parabolic circular concave primary mirror and a hyperbolic circular convex secondary mirror. The primary mirror includes a circular hole located at its center wherein a solar collector is located. The mirrored surface of the secondary mirror has three distinct zones: a center circle, an on-axis annulus, and an off-axis section. The parabolic shape of the primary mirror is chosen so that the primary mirror reflects light entering the system on-axis onto the on-axis annulus. A substantial amount of light entering the system off-axis is reflected by the primary mirror onto either the off-axis section or onto the center circle. Subsequently, the off-axis sections reflect the off-axis light toward the solar collector. Thus, off-axis light is captured which would otherwise be lost to the system. The novelty of the system appears to lie in the configuration of the primary mirror which focuses off-axis light onto an annular portion of the secondary mirror to enable capture thereof. This feature results in wide acceptance angle and a high concentration ratio, and also compensates for the effects of non-specular reflection, and enables a cassegrain configuration to be used where such characteristics are required.

Kruer, Mark Arthur↗

DEATH-STAR: Silicon and photovoltaic fission fragment detector arrays for light-ion induced fission correlation studies

Here, the Direct Excitation Angular Tracking pHotovoltaic-Silicon Telescope ARray (DEATH-STAR) combines a series of 12 silicon detectors in a ΔE–E configuration for charged particle identification with a large-area array of 56 photovoltaic (solar) cells for detection of fission fragments. The combination of many scattering angles and fission fragment detectors allows for an angular-resolved tool to study reaction cross sections using the surrogate method, anisotropic fission distributions, and angular momentum transfers through stripping, transfer, inelastic scattering, and other direct nuclear reactions. The unique photovoltaic detectors efficiently detect fission fragments while being insensitive to light ions and have a timing resolution of 15.63±0.37 ns. Alpha particles are detected with a resolution of 35.5 keV 1σ at 7.9 MeV. Measured fission fragment angular distributions are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Directivity of 100 keV-1 MeV photon sources in solar flares

Stereoscopic observations of 0.1-1.0 MeV photon sources in solar flares made with spectrometers aboard the ISEE 3 and PVO (Pioneer Venus Orbiter) have been analyzed to determine the directivity of the photon sources and its possible dependence on photon energy. During the period October 1, 1978-October 31, 1980, a total of 44 solar flares were observed simultaneously by the two instruments. Of these, 39 flares were in full view of both the instruments, the remaining five being partially occulted by the photosphere from the line of sight of at least one instrument. The view angles theta(P) and theta(I) of the PVO and ISEE 3 instruments with respect to the outward solar radius at the flare site varied from one flare to another and were in the range 9-88 deg. The difference between the two view angles varied from 1 deg to 66 deg. The observations of differential photon energy spectra averaged over more than about 16 s do not indicate any systematic directivity. In most flares the directivity of 0.1-1.0 MeV photon sources is found to be less than about 2.5.

Kane, S. R.↗

A New Technique for Retrieval of Tropospheric and Stratospheric Ozone Profiles using Sky Radiance Measurements at Multiple View Angles: Application to a Brewer Spectrometer

This paper describes and applies a new technique for retrieving diurnal variability in tropospheric ozone vertical distribution using ground-based measurements of ultraviolet sky radiances. The measured radiances are obtained by a polarization-insensitive modified Brewer double spectrometer located at Goddard Space Flight Center, in Greenbelt, Maryland, USA. Results demonstrate that the Brewer angular (0-72deg viewing zenith angle) and spectral (303-320 nm) measurements of sky radiance in the solar principal plane provide sufficient information to derive tropospheric ozone diurnal variability. In addition, the Brewer measurements provide stratospheric ozone vertical distributions at least twice per day near sunrise and sunset. Frequent measurements of total column ozone amounts from direct-sun observations are used as constraints in the retrieval. The vertical ozone profile resolution is shown in terms of averaging kernels to yield at least four points in the troposphere-low stratosphere, including good information in Umkehr layer 0 (0-5 km). The focus of this paper is on the derivation of stratospheric and tropospheric ozone profiles using both simulated and measured radiances. We briefly discuss the necessary modifications of the Brewer spectrometer that were used to eliminate instrumental polarization sensitivity so that accurate sky radiances can be obtained in the presence of strong Rayleigh scattering and aerosols. The results demonstrate that including a site-specific and time-dependent aerosol correction, based on Brewer direct-sun observations of aerosol optical thickness, is critical to minimize the sky radiance residuals as a function of observing angle in the optimal estimation inversion algorithm and improve the accuracy of the retrieved ozone profile.

Tzortziou, Maria↗

Design of Semiconductor-Based Back Reflectors for High Voc Monolithic Multijunction Solar Cells: Preprint

State-of-the-art multijunction cell designs have the potential for significant improvement before going to higher number of junctions. For example, the Voc can be substantially increased if the photon recycling taking place in the junctions is enhanced. This has already been demonstrated (by Alta Devices) for a GaAs single-junction cell. For this, the loss of re-emitted photons by absorption inthe underlying layers or substrate must be minimized. Selective back surface reflectors are needed for this purpose. In this work, different architectures of semiconductor distributed Bragg reflectors (DBR) are assessed as the appropriate choice for application in monolithic multijunction solar cells. Since the photon re-emission in the photon recycling process is spatially isotropic, the effectof the incident angle on the reflectance spectrum is of central importance. In addition, the DBR structure must be designed taking into account its integration into the monolithic multijunction solar cells, concerning series resistance, growth economics, and other issues. We analyze the tradeoffs in DBR design complexity with all these requirements to determine if such a reflector is suitable toimprove multijunction solar cells.

14 SOLAR ENERGY↗