SEARCH · Search NASA

Results for “Vector Processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Autonomous Cyber Defense Against Dynamic Multi-strategy Infrastructural DDoS Attacks

Dynamic Infrastructural Distributed Denial of Service (I-DDoS) attacks constantly change attack vectors to congest core backhaul links and disrupt critical network availability while evading end-system defenses. To effectively counter these highly dynamic attacks, defense mechanisms need to exhibit adaptive decision strategies for real-time mitigation. This paper presents a novel Autonomous DDoS Defense framework that employs model-based reinforcement agents. The framework continuously learns attack strategies, predicts attack actions, and dynamically determines the optimal composition of defense tactics such as filtering, limiting, and rerouting for flow diversion. Our contributions include extending the underlying formulation of the Markov Decision Process (MDP) to address simultaneous DDoS attack and defense behavior, and accounting for environmental uncertainties. We also propose a fine-grained action mitigation approach robust to classification inaccuracies in Intrusion Detection Systems (IDS). Additionally, our reinforcement learning model demonstrates resilience against evasion and deceptive attacks. Evaluation experiments using real-world and simulated DDoS traces demonstrate that our autonomous defense framework ensures the delivery of approximately 96 - 98% of benign traffic despite the diverse range of attack strategies.

Dutta, Ashutosh↗

NASA NTRS1974

V/STOL flying qualities research using the X-22A

The X-22A has four ducted propellers and four engines. The engines are connected to a common system of rotating shafts which distribute propulsive power to the four propellers. Changes in the direction of the thrust vector are accomplished by rotating the ducts, which are interconnected so that all rotate through the same angle. Thrust magnitude is determined by a collective pitch lever, very similar to a helicopter. There are four variable stability system (VSS) controllers: thrust, pitch, roll, and yaw, and three artificial feel servos for the evaluation pilot cockpit controls, each employing electrohydraulic servos. Longitudinal flying qualities for STOL landing approach, and lateral-directional flying qualities and control power requirements for STOL landing approach are discussed. Attention is given to the data acquisition and processing system.

Smith, R. E.↗

NASA NTRS1995

A hybrid neurocomputing/numerical strategy for nonlinear structural analysis

A hybrid neurocomputing/numerical strategy is presented for geometrically nonlinear analysis of structures. The strategy combines model-free data processing capabilities of computational neural networks with a Pade approximants-based perturbation technique to predict partial information about the nonlinear response of structures. In the hybrid strategy, multilayer feedforward neural networks are used to extend the validity of solutions by using training samples produced by Pade approximations to the Taylor series expansion of the response function. The range of validity of the training samples is taken to be the radius of convergence of Pade approximants and is estimated by setting a tolerance on the diverging approximants. The norm of residual vector of unbalanced forces in a given element is used as a measure to assess the quality of network predictions. To further increase the accuracy and the range of network predictions, additional training data are generated by either applying linear regression to weight matrices or expanding the training data by using predicted coefficients in a Taylor series. The effectiveness of the hybrid strategy is assessed by performing large-deflection analysis of a doubly-curved composite panel with a circular cutout, and postbuckling analyses of stiffened composite panels subjected to an in-plane edge shear load. In all the problems considered, the hybrid strategy is used to predict selective information about the structural response, namely the total strain energy and the maximum displacement components only.

Szewczyk, Z. Peter↗

NASA NTRS2003

Digital Images on the DIME

With NASA on its side, Positive Systems, Inc., of Whitefish, Montana, is veering away from the industry standards defined for producing and processing remotely sensed images. A top developer of imaging products for geographic information system (GIS) and computer-aided design (CAD) applications, Positive Systems is bucking traditional imaging concepts with a cost-effective and time-saving software tool called Digital Images Made Easy (DIME(trademark)). Like piecing a jigsaw puzzle together, DIME can integrate a series of raw aerial or satellite snapshots into a single, seamless panoramic image, known as a 'mosaic.' The 'mosaicked' images serve as useful backdrops to GIS maps - which typically consist of line drawings called 'vectors' - by allowing users to view a multidimensional map that provides substantially more geographic information.

Source record↗

NASA NTRS1999

ARG1 (altered response to gravity) encodes a DnaJ-like protein that potentially interacts with the cytoskeleton

Gravitropism allows plant organs to direct their growth at a specific angle from the gravity vector, promoting upward growth for shoots and downward growth for roots. Little is known about the mechanisms underlying gravitropic signal transduction. We found that mutations in the ARG1 locus of Arabidopsis thaliana alter root and hypocotyl gravitropism without affecting phototropism, root growth responses to phytohormones or inhibitors of auxin transport, or starch accumulation. The positional cloning of ARG1 revealed a DnaJ-like protein containing a coiled-coil region homologous to coiled coils found in cytoskeleton-interacting proteins. These data suggest that ARG1 participates in a gravity-signaling process involving the cytoskeleton. A combination of Northern blot studies and analysis of ARG1-GUS fusion-reporter expression in transgenic plants demonstrated that ARG1 is expressed in all organs. Ubiquitous ARG1 expression in Arabidopsis and the identification of an ortholog in Caenorhabditis elegans suggest that ARG1 is involved in other essential processes.

Non-NASA Center↗

NASA NTRSDate not supplied

Recalibration of the NASA Exterior Effects Room

The Exterior Effects Room (EER) is a psychoacoustic testing facility at NASA Langley Research Center which primarily focuses on testing human response to aircraft noise. The 39-seat auditorium houses a real-time spatial audio system and flyover simulation environment. The audio server utilizes an implementation of three-dimensional vector base amplitude panning (VBAP), a perceptual spatial audio technique exploiting loudspeaker triplets to place a virtual sound source at an arbitrary spatial position. Due to the irregular room geometry and nonuniform loudspeaker setup, the audio server applies equalization filtering to compensate for spectral coloration attributed to loudspeaker installation, crossover filtering, and delay/gain offsets. These filters can incorporate measurements taken at multiple listening points, allowing a more extensive listening area than filters derived from measurements taken at a single listening point. This work endeavors to update the existing equalization filter generation process by producing a new set of filters for various human subject testing scenarios.

Signal Processing↗

DOE OSTI2024

Implementing Superresolution of Nonstationary Tides with Wavelets: An Introduction to CWT_Multi

Abstract Tides are often nonstationary due to nonastronomical influences. Investigating variable tidal properties implies a trade-off between separating adjacent frequencies (using long analysis windows) and resolving their time variations (short analysis windows). Previous continuous wavelet transform (CWT) tidal methods resolved tidal species. Here, we present CWT_Multi, a MATLAB code that 1) uses CWT linearity (via the “response coefficient method”) to implement superresolution, i.e., resolving tidal constituents beyond the Rayleigh criterion; 2) provides a Munk–Hasselmann constituent selection criterion appropriate for superresolution; and 3) introduces an objective, time-variable form of inference (“dynamic inference”) based on time-varying data properties. CWT_Multi resolves tidal species on time scales of days, and multiple constituents per species with fortnightly filters. It outputs astronomical phase lags and admittances, analyzes multiple records, and provides power spectra of the signal(s), residual(s), and reconstruction(s); confidence limits; and signal-to-noise ratios. Artificial data and water levels from the Lower Columbia River Estuary (LCRE) and San Francisco Bay Delta (SFBD) are used to test CWT_Multi and compare it to harmonic analysis programs NS_Tide and UTide. CWT_Multi provides superior reconstruction, detiding, dynamic analysis utility, and time resolution of constituents (but with broader confidence limits). Dynamic inference resolves closely spaced constituents (like K 1 , S 1 , and P 1 ) on fortnightly time scales, quantifying impacts of diel power peaking (with a 24-h period, like S 1 ) on water levels in the LCRE. CWT_Multi also helps quantify the impacts of high flows and a salt barrier closing on tidal properties in the SFBD. On the other hand, CWT_Multi does not excel at prediction, and results depend on analysis details, as for any method applied to nonstationary data. Significance Statement Ocean tides, especially in coastal and estuarine systems, are often nonstationary, in the sense that the mean and standard deviation of tidal properties vary over time, usually in response to some nontidal process. We introduce here a MATLAB code, CWT_Multi, that uses wavelet transforms to resolve both tidal species and constituents on time scales from a few days to months. Our code accommodates multiple scalar time series and has typical tidal analysis features like constituent selection and inference, plus two forms of uncertainty analyses. It is flexible, allowing the user to adapt analysis properties to diverse datasets. CWT_Multi is applicable to many problems involving time-variable tides, including sea level rise, compound flooding, sediment transport, and wetland habitat analyses. Application to vector data is a straightforward extension, but further development of our uncertainty analysis is merited. Because nonstationary tidal analysis is rapidly advancing, we also define the features of a “well-formed” analysis code.

Lobo, Matthew↗

NASA NTRS1992

Geomagnetic Data from the US Magnetic Observatory Network

The United States operates a network of, at present, 13 ground-based magnetic observatories. Continuous, one-minute digital vector and scalar geomagnetic field values have been recorded for the last decade, and extend about five years further back for several stations. Periodic, 3-component absolute measurements of the magnetic field are made to provide baseline reference data with which to determine calibrated field view values at all intervals. These data are now being made available on CD-ROM. The quality of the data depends upon a number of factors, including the types of instrumentation used to monitor and measure the field, the procedures and equipment used to collect and process the data, and the quality controls employed to check the data for erroneous values. These various factors are described here for the U.S. digital geomagnetic observatory data. The observatories have been undergoing an evolution over the last 15 years that will continue to significantly improve the accuracy, precision, and availability of geomagnetic data.

Herzog, Donald C.↗

NASA NTRS1992

Reconstructing tethered satellite skiprope motion by bandpass filtering magnetometer measurements

This paper presents a unique scheme for reconstructing tethered satellite skiprope motion by ground processing satellite magnetometer measurements. The measurements are modified based on ground knowledge of the earth's magnetic field and passed through bandpass filters tuned to the skiprope frequency. Skiprope motion is then deduced from the steady-state outputs of the filters. Simulation results are presented which verify the scheme and show it to be robust. The concept is not just limited to tethered satellites. Indeed, it can be applied whenever there is a need to reconstruct the coning motion of a body about a known axis, given measurements of a known vector in body-fixed axes.

Polites, M. E.↗

NASA NTRS1985

Wind measurements with the High Resolution Doppler Imager (HRDI)

The Upper Atmosphere Research Satellite (UARS), to be launched in 1989, is to provide a global data set required to understand the mechanisms controlling upper atmosphere structure and processes, as well as the response of the upper atmosphere to natural and human perturbations. The High Resolution Doppler Imager (HRDI) is the primary instrument for measuring the dynamics of the stratosphere and mesosphere. The goal of HRDI is to measure wind velocities in the stratosphere and mesosphere during the day and the mesosphere and thermosphere at night with an accuracy of 5 m/sec. HRDI will determine winds by measuring Doppler shifts of atmosphere absorption and emission features. Line of sight winds will be taken in two directions, thus allowing the wind vector to be formed. The HRDI instrument is overviewed. The basis of the measurement is explained, as is an outline of the instrument. Since neither instrument nor observational techniques is fully mature, only a brief sketch is presented.

Skinner, W. R.↗

NASA NTRS2009

Porting Gravitational Wave Signal Extraction to Parallel Virtual Machine (PVM)

Laser Interferometer Space Antenna (LISA) is a planned NASA-ESA mission to be launched around 2012. The Gravitational Wave detection is fundamentally the determination of frequency, source parameters, and waveform amplitude derived in a specific order from the interferometric time-series of the rotating LISA spacecrafts. The LISA Science Team has developed a Mock LISA Data Challenge intended to promote the testing of complicated nested search algorithms to detect the 100-1 millihertz frequency signals at amplitudes of 10E-21. However, it has become clear that, sequential search of the parameters is very time consuming and ultra-sensitive; hence, a new strategy has been developed. Parallelization of existing sequential search algorithms of Gravitational Wave signal identification consists of decomposing sequential search loops, beginning with outermost loops and working inward. In this process, the main challenge is to detect interdependencies among loops and partitioning the loops so as to preserve concurrency. Existing parallel programs are based upon either shared memory or distributed memory paradigms. In PVM, master and node programs are used to execute parallelization and process spawning. The PVM can handle process management and process addressing schemes using a virtual machine configuration. The task scheduling and the messaging and signaling can be implemented efficiently for the LISA Gravitational Wave search process using a master and 6 nodes. This approach is accomplished using a server that is available at NASA Ames Research Center, and has been dedicated to the LISA Data Challenge Competition. Historically, gravitational wave and source identification parameters have taken around 7 days in this dedicated single thread Linux based server. Using PVM approach, the parameter extraction problem can be reduced to within a day. The low frequency computation and a proxy signal-to-noise ratio are calculated in separate nodes that are controlled by the master using message and vector of data passing. The message passing among nodes follows a pattern of synchronous and asynchronous send-and-receive protocols. The communication model and the message buffers are allocated dynamically to address rapid search of gravitational wave source information in the Mock LISA data sets.

Thirumalainambi, Rajkumar↗

DOE OSTI2019

X-ray diffraction, Mössbauer spectroscopy, neutron diffraction, optical absorption and ab-initio calculation of magnetic process in orthorhombic YFe x Cr (1-x) O 3 (0 ≤ x ≤ 1) compounds

YFe x Cr (1-x) O 3 (0 ≤ x ≤ 1) compounds prepared by autocombustion were studied with X-ray and neutron powder diffraction, Mössbauer spectroscopy and ab-initio electronic structure calculations to try to understand the interplay of magnetic order and structural parameters as a function of doping in this multiferroic material. All samples exhibit the orthorhombic nuclear structure (space group symmetry Pnma) and the cell parameters vary continuously as a function of doping. In the neutron powder diffraction patterns it was observed that in addition to the Pnma nuclear structure peaks reflections are seen in all samples which arise from magnetic order. These peaks can be indexed using the nuclear unit cell indicating an ordering vector of k = (0,0,0). Using representational analysis and Rietveld refinements the magnetic structure was determined to be Pn’ma’ and the mean magnetic moment per transition metal atom was observed to decrease continuously from Fe to Cr. For compounds with x > 0.25 a weak ferromagnetic contribution is also present which is due to a small canting of the moments out of the basal plane. The Mössbauer spectra corroborate the NPD results with all samples showing single magnetic sextets at 4.2 K. The energy gap and the main direct interband transition of the endmember samples were obtained by optical absorption measurements. These optical data were analyzed with the help of DFT band structure calculation using the GGA-PBE + U approximation.

Salazar-Rodriquez, Roberto↗

DOE OSTI2018

Langevin Dynamics with Spatial Correlations as a Model for Electron-Phonon Coupling

Stochastic Langevin dynamics has been traditionally used as a tool to describe nonequilibrium processes. When utilized in systems with collective modes, traditional Langevin dynamics relaxes all modes indiscriminately, regardless of their wavelength. In this paper, we propose a generalization of Langevin dynamics that can capture a differential coupling between collective modes and the bath, by introducing spatial correlations in the random forces. This allows modeling the electronic subsystem in a metal as a generalized Langevin bath endowed with a concept of locality, greatly improving the capabilities of the two-temperature model. The specific form proposed here for the spatial correlations produces a physical wave-vector and polarization dependency of the relaxation produced by the electron-phonon coupling in a solid. We show that the resulting model can be used for describing the path to equilibration of ions and electrons and also as a thermostat to sample the equilibrium canonical ensemble. By extension, the family of models presented here can be applied in general to any dense system, solids, alloys, and dense plasmas. Finally, as an example, we apply the model to study the nonequilibrium dynamics of an electron-ion two-temperature Ni crystal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1975

An explanation for Iapetus' asymmetric reflectance

Cook and Franklin (1970) consider Iapetus originally to have been coated with about a meter of ice. They suggest that Iapetus' orbital velocity about Saturn has caused an asymmetric erosion of this ice layer which has now nearly laid bare its 'leading' hemisphere, but not as yet the entire 'trailing' hemisphere. Rather than an erosion process which operates more actively on the leading side, this paper considers an ice deposition mechanism operating more actively on the trailing side. The two main assumptions used are (1) that there are more icy than rocky meteoroids in Saturn's environment, and (2) that some portion of each icy meteoroid will stick to a surface at collision velocities less than 2.4 km per sec, but will completely vaporize itself at greater velocities. A meteoroid can have the minimum collision velocity of about 1.7 km per sec with Iapetus only if their velocity vectors are nearly parallel, and under these conditions such collisions would tend to be with the trailing hemisphere. Collisions with the leading hemisphere will tend to be at a much higher velocity.

Peterson, C.↗

NASA NTRS1982

Design of analytical failure detection using secondary observers

The problem of designing analytical failure-detection systems (FDS) for sensors and actuators, using observers, is addressed. The use of observers in FDS is related to the examination of the n-dimensional observer error vector which carries the necessary information on possible failures. The problem is that in practical systems, in which only some of the components of the state vector are measured, one has access only to the m-dimensional observer-output error vector, with m or = to n. In order to cope with these cases, a secondary observer is synthesized to reconstruct the entire observer-error vector from the observer output error vector. This approach leads toward the design of highly sensitive and reliable FDS, with the possibility of obtaining a unique fingerprint for every possible failure. In order to keep the observer's (or Kalman filter) false-alarm rate under a certain specified value, it is necessary to have an acceptable matching between the observer (or Kalman filter) models and the system parameters. A previously developed adaptive observer algorithm is used to maintain the desired system-observer model matching, despite initial mismatching or system parameter variations. Conditions for convergence for the adaptive process are obtained, leading to a simple adaptive law (algorithm) with the possibility of an a priori choice of fixed adaptive gains. Simulation results show good tracking performance with small observer output errors, while accurate and fast parameter identification, in both deterministic and stochastic cases, is obtained.

Sisar, M.↗

NASA NTRSDate not supplied

Recalibration of the NASA Exterior Effects Room

The Exterior Effects Room (EER) is a psychoacoustic testing facility at NASA Langley Research Center which primarily focuses on testing human response to aircraft noise. The 39-seat auditorium houses a real-time spatial audio system and flyover simulation environment. The audio server utilizes an implementation of three-dimensional vector base amplitude panning (VBAP), a perceptual spatial audio technique exploiting loudspeaker triplets to place a virtual sound source at an arbitrary spatial position. Due to the irregular room geometry and non-uniform loudspeaker setup, the audio server applies equalization filtering to compensate for spectral coloration attributed to loudspeaker installation, crossover filtering, and delay/gain offsets. These filters can incorporate measurements taken at multiple listening points, allowing a more extensive listening area than filters derived from measurements taken at a single listening point. This work endeavors to update the existing equalization filter generation process by producing a new set of filters for various human subject testing scenarios.

calibration↗

DOE OSTI2022

Intrinsically stretchable neuromorphic devices for on-body processing of health data with artificial intelligence

For leveraging wearable technologies to advance precision medicine, personalized and learning-based analysis of continuously acquired health data is indispensable, for which neuromorphic computing could provide the most efficient implementation of artificial intelligence (AI) data processing. For realizing on-body neuromorphic computing, skin-like stretchability is required, but yet to be combined with the suite of desired neuromorphic metrics, including linear, symmetric weight update, and sufficient state retention, for achieving high computing efficiency. Here, we report an intrinsically stretchable neuromorphic device based on an electrochemical transistor, which provides a large number (>800) of states, linear/symmetric weight update, excellent switching endurance (>100 million), good state retention (>10 4 s), together with high stretchability of 100% strain. Further integration into a prototype array successfully realized the implementation of vector-matrix multiplication even at 100% strain. Finally, we demonstrate the feasibility of implementing AI-based classification of health signals (as exemplified by electrocardiograms) with a high accuracy that is minimally influenced by the stretched state of the neuromorphic hardware. Finally, this work breaks the ground for combining AI data analysis into skin-like wearable electronics for achieving human-integrated/mimetic intelligent systems.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1992

The contribution of ion-cyclotron waves to electron heating and SAR-arc excitation near the storm-time plasmapause

The potential role of ion-cyclotron waves in the electron heating process has been studied, using the HOTRAY code. It is demonstrated that ion-cyclotron waves can play an important role in both the energy transfer to plasmaspheric electrons and the subsequent downward heat conduction to SAR arc altitudes. In particular, such waves can experience enhanced path integrated amplification along the steep plasmapause density gradient. The latter tends to keep the wave normal angle small on several successive bounces across the equator, thus allowing cyclotron-resonant amplification leading to a total gain of up to 20 e-foldings. When the wave propagation vector becomes highly oblique, absorption occurs during Landau resonance with thermal plasmaspheric electrons, increasing the electron temperature in the direction parallel to the ambient field and leading directly to heat conduction into ionosphere.

Thorne, Richard M.↗