Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic force microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Solution processed lanthanum aluminate gate dielectrics for use in metal oxide-based thin film transistors

We report on ZnO-based thin-film transistors (TFTs) employing lanthanum aluminate gate dielectrics (La{sub x}Al{sub 1−x}O{sub y}) grown by spray pyrolysis in ambient atmosphere at 440 °C. The structural, electronic, optical, morphological, and electrical properties of the La{sub x}Al{sub 1−x}O{sub y} films and devices as a function of the lanthanum to aluminium atomic ratio were investigated using a wide range of characterization techniques such as UV-visible absorption spectroscopy, impedance spectroscopy, spectroscopic ellipsometry, atomic force microscopy, x-ray diffraction, and field-effect measurements. As-deposited LaAlO{sub y} dielectrics exhibit a wide band gap (∼6.18 eV), high dielectric constant (k ∼ 16), low roughness (∼1.9 nm), and very low leakage currents (<3 nA/cm{sup 2}). TFTs employing solution processed LaAlO{sub y} gate dielectrics and ZnO semiconducting channels exhibit excellent electron transport characteristics with hysteresis-free operation, low operation voltages (∼10 V), high on/off current modulation ratio of >10{sup 6}, subthreshold swing of ∼650 mV dec{sup −1}, and electron mobility of ∼12 cm{sup 2} V{sup −1} s{sup −1}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Probe Length Effect on the Cantilever of an Atomic Force Microscope in Measuring the Mechanical Properties of Living Neurons

Living sensory neurons were studied by atomic force microscopy in the PeakForce QNM mode under near-physiological conditions. The dependence of the measured apparent Young modulus of cells on the ratio of the probe height to the beam length on a used cantilever was revealed. A qualitative explanation based on the analysis of beam strains in two limit cases, in which the probe slides over a studied object and the probe sticks to the latter, was given to the obtained result. It was proposed to classify native cells by the character of their interaction with the probe (sliding or sticking).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phosphorylation by Nek1 regulates opening and closing of voltage dependent anion channel 1

VDAC1 is a key component of the mitochondrial permeability transition pore. To initiate apoptosis and certain other forms of cell death, mitochondria become permeable such that cytochrome c and other pre-apoptotic molecules resident inside the mitochondria enter the cytosol and activate apoptotic cascades. We have shown recently that VDAC1 interacts directly with never-in-mitosis A related kinase 1 (Nek1), and that Nek1 phosphorylates VDAC1 on Ser193 to prevent excessive cell death after injury. How this phosphorylation regulates the activity of VDAC1, however, has not yet been reported. Here, we use atomic force microscopy (AFM) and cytochrome c conductance studies to examine the configuration of VDAC1 before and after phosphorylation by Nek1. Wild-type VDAC1 assumes an open configuration, but closes and prevents cytochrome c efflux when phosphorylated by Nek1. A VDAC1-Ser193Ala mutant, which cannot be phosphorylated by Nek1 under identical conditions, remains open and constitutively allows cytochrome c efflux. Conversely, a VDAC1-Ser193Glu mutant, which mimics constitutive phosphorylation by Nek1, remains closed by AFM and prevents cytochrome c leakage in the same liposome assays. Our data provide a mechanism to explain how Nek1 regulates cell death by affecting the opening and closing of VDAC1.

60 APPLIED LIFE SCIENCES↗

Influence of helium dilution of silane on microstructure and opto-electrical properties of hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited by HW-CVD

Highlights: ► nc-Si:H films synthesized using HW-CVD method from silane and helium gas mixture without hydrogen. ► Volume fraction of crystallites and its size in the films decreases with increase in He dilution of SiH{sub 4}. ► Increase in Urbach energy and defect density with increase in He dilution of SiH{sub 4}. ► Increasing He dilution, hydrogen bonding in the films shifts from Si-H{sub 2} and (Si-H{sub 2}){sub n} complexes to Si-H. ► Hydrogen content films were found to be <2.2 at.% but the bandgap remains as high as 2.0 eV or even more. -- Abstract: We report influence of helium dilution of silane in hot wire chemical vapor deposition for hydrogenated nano-crystalline silicon films. Structural properties of these films have been investigated by using Raman spectroscopy, low angle x-ray diffraction, Fourier transform infra-red spectroscopy and non-contact atomic force microscopy. Optical characterization has been performed by UV–visible spectroscopy. It has been observed that in contrast to conventional plasma enhanced chemical vapor deposition, the addition of helium with silane in hot wire chemical vapor deposition has an adverse effect on the crystallinity and the material properties. Hydrogen content in the films was found <2.2 at.% whereas the bandgap remain as high as 2 eV or more. Increase in Urbach energy and defect density also suggests the deterioration effect of helium on material properties. The possible reasons for the deterioration of crystallinity and the material properties have been discussed.

36 MATERIALS SCIENCE↗

Growth of AlGaN/GaN heterojunction field effect transistors on semi-insulating GaN using an AlGaN interlayer

Semi-insulating (SI) GaN layers were grown on 4H-SiC substrates by inserting an AlGaN layer between the AlN buffer and the GaN layer. Secondary ion mass spectroscopy measurements showed that the AlGaN layer prevented Si from diffusing from the substrate into the GaN layer. X-ray diffraction and atomic force microscopy analyses showed that an optimized AlGaN interlayer does not degrade the crystal quality or surface morphology of the SI GaN. The room temperature mobility of an AlGaN/GaN heterostructure using this SI GaN was 2200 cm{sup 2}/V s. High electron mobility transistors (HEMTs) with 0.65 {mu}m long gates were also fabricated on these SI GaN buffers. A power density of 19.0 W/mm with a power added efficiency of 48% was demonstrated at 10 GHz at a drain bias of 78 V. These HEMTs also exhibited sharp pinch off, low leakage, and negligible dispersion.

36 MATERIALS SCIENCE↗

Vacancy defect and carrier distributions in the high mobility electron gas formed at ion-irradiated SrTiO{sub 3} surfaces

Using a combination of advanced characterization tools (positron annihilation spectroscopy, conductive-tip atomic force microscopy, and high-field magnetotransport), we have studied the extension, origin and properties of the high mobility electron gas (HMEG) generated by etching the SrTiO{sub 3} surfaces with Ar{sup +} ions. Contrary to previous assumptions, we show that this HMEG is not confined to nanometric thickness but extends to a few micrometer from the surface. We discuss this unanticipated large spatial extension in terms of the striking large diffusion of oxygen vacancy-related defects.

36 MATERIALS SCIENCE↗

Sputter-deposited (Pb,La)(Zr,Ti)O{sub 3} thin films: Effect of substrate and optical properties

Optically transparent (Pb,La)(Zr,Ti)O{sub 3} (PLZT) thin films were sputter-deposited on SrTiO{sub 3}(001) and MgO(001) substrates with a SrRuO{sub 3}(110) bottom electrode. X-ray diffraction analysis showed epitaxial growth of monocrystalline PLZT, with (001) rocking curve full width at half maxima of {approx}0.03 degree sign and {approx}0.3 degree sign for films deposited on SrTiO{sub 3} and MgO, respectively. In-plane epitaxial alignment of the SrRuO{sub 3} and PLZT epilayers was verified from {phi}-scans. It was established from atomic force microscopy measurements that the PLZT surface roughness meets the requirement for optical waveguide applications. Recorded P-E loops for films grown on both substrates showed a remanent polarization of {approx}36 {mu}C/cm{sup 2}. The refractive index of the PLZT layer was estimated from rutile prism coupling measurements at {approx}2.56 for {lambda}=633 nm, consistent with data obtained by spectroscopic ellipsometry. The ferroelectric and optical characteristics of the films, as well as their surface roughness, were not appreciably different for the two substrates. This makes MgO the preferred choice of substrate for optical waveguide devices due to its low refractive index compared to that of SrTiO{sub 3}.

36 MATERIALS SCIENCE↗

Ultrastructural Location and Interactions of the Immunoglobulin Receptor Binding Sequence within Fibrillar Type I Collagen

Collagen type I is a major constituent of animal bodies. It is found in large quantities in tendon, bone, skin, cartilage, blood vessels, bronchi, and the lung interstitium. It is also produced and accumulates in large amounts in response to certain inflammations such as lung fibrosis. Our understanding of the molecular organization of fibrillar collagen and cellular interaction motifs, such as those involved with immune-associated molecules, continues to be refined. In this study, antibodies raised against type I collagen were used to label intact D-periodic type I collagen fibrils and observed with atomic force microscopy (AFM), and X-ray diffraction (XRD) and immunolabeling positions were observed with both methods. The antibodies bind close to the C-terminal telopeptide which verifies the location and accessibility of both the major histocompatibility complex (MHC) class I (MHCI) binding domain and C-terminal telopeptide on the outside of the collagen fibril. The close proximity of the C-telopeptide and the MHC1 domain of type I collagen to fibronectin, discoidin domain receptor (DDR), and collagenase cleavage domains likely facilitate the interaction of ligands and receptors related to cellular immunity and the collagen-based Extracellular Matrix.

59 BASIC BIOLOGICAL SCIENCES↗

Bioactive Silver-Containing Compositions of Methyl Cellulose with a Natural Sorbent Zosterin: The Structure, Morphology, and Properties

The morphology, structure, and optical properties of polymeric compositions based on a natural sorbent Zosterin, methyl cellulose (MC), and a Poviargol (silver-containing preparation) are studied via atomic force microscopy (AFM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and X-ray diffraction (XRD). AFM studies show substantial changes in the morphology of the surface of obtained films from granular with different grain sizes (for Zosterin and an MC/Zosterin binary system) to spongy with nanopores and submicron pores on the surface (for an MC/Zosterin/Poviargol ternary system). Silver nanoparticles with different shapes and sizes are observed by TEM in the MC/Zosterin/Poviargol ternary system against the background of the MC/Zosterin polymer matrix which has fractal-type morphology. A reflection corresponding to zero-valent silver is found by XRD in the MC/Zosterin/Poviargol ternary composition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Detection of Alzheimer's amyloid beta aggregation by capturing molecular trails of individual assemblies

Assembly of Amyloid beta (A{beta}) peptides, in particular A{beta}-42 is central to the formation of the amyloid plaques associated with neuro-pathologies such as Alzheimer's disease (AD). Molecular assembly of individual A{beta}-42 species was observed using a simple fluorescence microscope. From the molecular movements (aka Brownian motion) of the individual peptide assemblies, we calculated a temporal evolution of the hydrodynamic radius (R{sub H}) of the peptide at physiological temperature and pH. The results clearly show a direct relationship between R{sub H} of A{beta}-42 and incubation period, corresponding to the previously reported peptide's aggregation kinetics. The data correlates highly with in solution-based label-free electrochemical detection of the peptide's aggregation, and A{beta}-42 deposited on a solid surface and analysed using atomic force microscopy (AFM). To the best of our knowledge, this is the first analysis and characterisation of A{beta} aggregation based on capturing molecular trails of individual assemblies. The technique enables both real-time observation and a semi-quantitative distribution profile of the various stages of A{beta} assembly, at microM peptide concentration. Our method is a promising candidate for real-time observation and analysis of the effect of other pathologically-relevant molecules such as metal ions on pathways to A{beta} oligomerisation and aggregation. The method is also a promising screening tool for AD therapeutics that target A{beta} assembly.

60 APPLIED LIFE SCIENCES↗

Measurement of mechanical and fracture properties of solid electrolyte interphase on lithium metal anodes in lithium ion batteries

Mechanical integrity of the solid electrolyte interphase (SEI) plays an essential role in determining the life and performance of lithium-ion batteries. Fracture and continued formation of the SEI contribute to consumption of lithium, drying of electrolyte, increase in impedance, and growth of dendrites resulting in capacity fade and premature failure. Electrolyte additives such as fluoroethylene carbonate (FEC) have been known to improve performance, but the underlying reasons have been elusive. Despite its importance, reliable methods for mechanical characterization of SEI have been lacking. In this paper, we present a new experimental technique that combines atomic force microscopy and membrane-bulge configuration to accurately measure the stress-strain behavior of SEI, including the onset of inelastic response and evolution of fracture. We characterize the SEI formed with two ethylene carbonate-based electrolytes, without and with fluoroethylene carbonate (FEC) additive. The measurements show a striking contrast; SEI with FEC additive has 80% higher elastic modulus and a vastly higher resistance to fracture. These findings offer a mechanical-behavior based rationale to understand how SEI controls battery performance. Moreover, the experimental technique offers a robust diagnostic tool to design electrolytes that can form SEI with the desired mechanical properties for optimal battery performance.

25 ENERGY STORAGE↗

Electrical passivation and chemical functionalization of SiC surfaces by chlorine termination

We have developed a straightforward plasma-based method which yields chlorine-terminated n-type 6H-SiC surfaces. Atomic force microscopy shows that the surface roughness is not affected by the plasma processing. Additionally, x-ray photoelectron spectroscopy reveals a significant reduction in oxygen, and a corresponding rise of chlorine core level intensities, following halogen termination. Contact potential difference and surface photovoltage measurements show formation of negative surface dipoles and approximately flat band surface potentials after chlorine termination of (0001) n-type 6H-SiC (built-in voltage V{sub bi}<20 meV). Starting from halogenated surfaces, we demonstrate both ultraviolet light-induced and thermally-induced functionalization with alkene-derived self-assembled organic monolayers.

36 MATERIALS SCIENCE↗

Dislocation gliding and cross-hatch morphology formation in AIII-BV epitaxial heterostructures

An approach for understanding the origin of cross-hatch pattern (CHP) on the surface of lattice mismatched GaMnAs/InGaAs samples grown on GaAs (001) substrates is developed. It is argued that the motion of threading dislocations in the (111) slip planes during the relaxation of InGaAs buffer layer is more complicated process and its features are similar to the ones of dislocation half-loops gliding in plastically deformed crystals. The heterostructures were characterized by atomic force microscopy and electron beam induced current (EBIC). Detailed EBIC experiments revealed contrast features, which cannot be accounted for by the electrical activity of misfit dislocations at the buffer/substrate interface. We attribute these features to specific extended defects (EDs) generated by moving threading dislocations in the partially relaxed InGaAs layers. We believe that the core topology, surface reconstruction, and elastic strains from these EDs accommodated in slip planes play an important role in the CHP formation. The study of such electrically active EDs will allow further understanding of degradation and changes in characteristics of quantum devices based on strained heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and luminescent properties of ZnO:P films produced by annealing ZnP{sub 2} wafers in atomic oxygen

The epitaxial ZnO:P films are fabricated by annealing the ZnP{sub 2} wafers in atomic oxygen (oxygen radicals). The properties of the films are studied by X-ray diffraction analysis, atomic force microscopy, Auger spectroscopy, and photoluminescence measurements. In the X-ray diffraction spectra of the samples, the (002) peak is observed, suggesting that the ZnO:P films are oriented along the c axis. The Auger spectroscopy data show that the ZnO films contain phosphorus. The low-temperature photoluminescence spectrum observed for the ZnO: P films exhibits a 3.356 eV peak presumably corresponding to excitons bound at neutral acceptors and a peak at 3.306 eV (free electron)-acceptor transitions associated with the P{sub O} level. The phosphorus related acceptor level is localized at 128 meV above the top of the valence band. The origin of the 3.312 eV band related to recombination at donor-acceptor pairs is discussed.

36 MATERIALS SCIENCE↗

Morphomechanical and structural changes induced by ROCK inhibitor in breast cancer cells

The EMT phenomenon is based on tumour progression. The cells lose their physiologic phenotype and assumed a mesenchymal phenotype characterized by an increased migratory capacity, invasiveness and high resistance to apoptosis. In this process, RHO family regulates the activation or suppression of ROCK (Rho-associated coiled-coil containing protein kinase) which in turn regulates the cytoskeleton dynamics. However, while the biochemical mechanisms are widely investigated, a comprehensive and careful estimation of biomechanical changes has not been extensively addressed. In this work, we used a strong ROCK inhibitor, Y-27632, to evaluate the effects of inhibition on living breast cancer epithelial cells by a biomechanical approach. Atomic Force Microscopy (AFM) was used to estimate changes of cellular elasticity, quantified by Young's modulus parameter. The morphometric alterations were analyzed by AFM topographies and Confocal Laser Scanning Microscopy (CLSM). Our study revealed a significant modification in the Young's modulus after treatment, especially as regards cytoskeletal region. Our evidences suggest that the use of Y-27632 enhanced the cell rigidity, preventing cell migration and arrested the metastasization process representing a potential powerful factor for cancer treatment. - Highlights: • RHO family regulated the activation or suppression of ROCK (Rho-associated protein kinase). • ROCK inhibitor (Y-2763) modified the Young Modulus's in the cytoskeletal region. • Y-2763 enhanced the cell rigidity and arrested metestatisation process. • Rock inhibitor reduction of cell elasticity envisaged novel antitumor therapies.

60 APPLIED LIFE SCIENCES↗

Impact of Morphological Features on the Dielectric Breakdown at SiO{sub 2}/3C-SiC Interfaces

Thin SiO{sub 2} layers were thermally grown onto cubic silicon carbide (3C-SiC) heteroepitaxial layers of different surface roughness and with different types of near-surface epitaxial defects. Localized dielectric breakdown (BD) was studied by electrically stressing the system using Conductive Atomic Force Microscopy (C-AFM), which constitutes a means to directly and simultaneously observe localized dielectric failure as a function of stress time and surface morphology with nanoscale lateral resolution. The BD kinetics was evaluated by fitting the experimental failure ratios as a function of stress time to the failure probability described by Weibull statistics, in turn allowing to distinguish between defect-induced (extrinsic) and intrinsic dielectric BD events. The results give useful information about how morphological features at the 3C-SiC surface influence the BD generation in thermally grown oxides on this polytype.

36 MATERIALS SCIENCE↗

Preparation and characterization of PVP-PVA–ZnO blend polymer nano composite films

Flexible self-standing films of PVP-PVA blend composites are prepared by using ZnO as a nano filler at different concentrations. The structural, compositional, morphological and optical studies made with the help of X-ray diffraction (XRD), Fourier Transform Infra-Red spectroscopy (FTIR), Scanning electron microscope (SEM), Atomic Force Microscopy (AFM), Ultraviolet-visible spectroscopy (UV-vis) and Photoluminescence (PL) spectra are presented in this paper. The results of XRD indicate that ZnO nanoparticles are formed with hexagonal phase in the polymeric matrix. SEM images show the dispersion of ZnO nano filler in the polymer matrix. UV–vis spectra reveal that the absorption peak is centered around 235 nm and 370 nm for the nano composite films. The blue shift is observed with decrease in the concentration of the nano filler. PL spectra shows the excitation wavelength is given at 320 nm.The emission peaks were observed at 383 nm ascribing to the electronic transitions between valence band and conduction band and the peak at 430 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Silicon structuring by etching with liquid chlorine and fluorine precursors using femtosecond laser pulses

The aim of this study is to investigate the micrometer and submicrometer scale structuring of silicon by liquid chlorine and fluorine precursors with 200 fs laser pulses working at both fundamental (775 nm) and frequency doubled (387 nm) wavelengths. The silicon surface was irradiated at normal incidence by immersing the Si (111) substrates in a glass container filled with liquid chlorine (CCl{sub 4}) and fluorine (C{sub 2}Cl{sub 3}F{sub 3}) precursors. We report that silicon surfaces develop an array of spikes with single step irradiation processes at 775 nm and equally at 387 nm. When irradiating the Si surface with 400 pulses at 330 mJ/cm{sup 2} laser fluence and a 775 nm wavelength, the average height of the formed Si spikes in the case of fluorine precursors is 4.2 {mu}m, with a full width at half maximum of 890 nm. At the same irradiation wavelength chlorine precursors develop Si spikes 4 {mu}m in height and with a full width at half maximum of 2.3 {mu}m with irradiation of 700 pulses at 560 mJ/cm{sup 2} laser fluence. Well ordered areas of submicrometer spikes with an average height of about 500 nm and a width of 300 nm have been created by irradiation at 387 nm by chlorine precursors, whereas the fluorine precursors fabricate spikes with an average height of 700 nm and a width of about 200 nm. Atomic force microscopy and scanning electron microscopy of the surface show that the formation of the micrometer and sub-micrometer spikes involves a combination of capillary waves on the molten silicon surface and laser-induced etching of silicon, at both 775 nm and 387 nm wavelength irradiation. The energy-dispersive x-ray measurements indicate the presence of chlorine and fluorine precursors on the structured surface. The fluorine precursors create a more ordered area of Si spikes at both micrometer and sub-micrometer scales. The potential use of patterned Si substrates with gradient topography as model scaffolds for the systematic exploration of the role of 3D micro/nano morphology on cell adhesion and growth is envisaged.

36 MATERIALS SCIENCE↗