Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Trapping of lithium atoms in a large hollow optical dipole trap

We describe the trapping of lithium atoms in an optical dipole trap about 1 mm in size, with a nearly rectangular potential. The trap has the shape of a cylinder with flat bases. The confinement region is bounded by thin walls produced by light with a frequency blue-detuned from an atomic transition (resonance) frequency by 19 GHz. Before trapping, the gas is collected and cooled in a magneto-optical trap whose centre nearly coincides with the centre of the dipole trap. After switching off the magneto-optical trap, we have photographed the atoms remaining in the dipole trap. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chalcogenide perovskite BaZrS 3 thin-film electronic and optoelectronic devices by low temperature processing

Owing to its superior visible light absorption and high chemical stability, chalcogenide perovskite barium zirconium sulfide (BaZrS 3 ) has attracted significant attention in the past few years as a potential alternative to hybrid halide perovskites for optoelectronics. However, the high processing temperatures of BaZrS 3 thin films at above 1000 °C severely limits their potential for device applications. Herein, we report the synthesis of BaZrS 3 thin films at temperatures as low as 500 °C, by changing the chemical reaction pathway. The single phase BaZrS 3 thin film was confirmed by X-ray diffraction and Raman spectroscopy. Atomic force microscopy and scanning electron microscopy show that crystalline size and surface roughness were consistently reduced with decreasing annealing temperature. The lower temperatures further eliminate sulfur vacancies and carbon contaminations associated with high temperature processing. The ability to synthesize chalcogenide perovskite thin films at lower temperatures removes a major hurdle for their device fabrication. The photodetectors demonstrate fast response and an on/off ratio of 80. Finally, the fabricated field effect transistors show an ambipolar behavior with electron and hole mobilities of 16.8 cm 2 /Vs and 2.6 cm 2 /Vs, respectively.

36 MATERIALS SCIENCE↗

High quality ultrathin Bi{sub 2}Se{sub 3} films on CaF{sub 2} and CaF{sub 2}/Si by molecular beam epitaxy with a radio frequency cracker cell

We report a method to fabricate high quality Bi{sub 2}Se{sub 3} thin films using molecular beam epitaxy with a radio frequency cracker cell as an atomic selenium source. With Se-to-Bi ratios close to exact stoichiometry, optimal layer-by-layer growth of high quality Bi{sub 2}Se{sub 3} thin films with smooth surfaces has been achieved on CaF{sub 2}(111) substrates and Si(111) substrates with a thin epitaxial CaF{sub 2} buffer layer (CaF{sub 2}/Si). Transport measurements show a characteristic weak-antilocalization magnetoresistance in all the films, with the emergence of a weak-localization contribution in the ultrathin film limit. Quantum oscillations, attributed to the topological surface states have been observed, including in films grown on CaF{sub 2}/Si.

36 MATERIALS SCIENCE↗

Nitrogen actinometry for measurement of nitrogen radical spatial distribution in large-area plasma-enhanced chemical vapor deposition

Density distributions of radicals in the large-area silicon nitride (Si{sub 3}N{sub 4}) plasma-enhanced chemical vapor deposition (PECVD) process were measured using a spatially resolvable optical emission spectrometer (SROES). To determine the qualitative distribution of a target radical, the authors used optical actinometry with nitrogen (N{sub 2}) gas as an actinometer. To compare the SROES data and process results, the thickness of the deposited Si{sub 3}N{sub 4} thin films using an ellipsometer was measured. By introducing nitrogen-based optical actinometry, the authors obtained very good agreement between the experimental results of the distributions of atomic nitrogen radical and the deposited thicknesses of Si{sub 3}N{sub 4} thin films. Based on these experimental results, the uniformity of the process plasma in the PECVD process at different applied radio frequency powers was analyzed.

36 MATERIALS SCIENCE↗

The effect of suprathermal protons on the physical conditions in Seyfert galaxy nuclei

The physical conditions in a high density hydrogen gas heated and ionized by suprathermal protons were investigated, with application to the gas in the nuclear region of Seyfert galaxies. The gas is assumed optically thick to Lyman and Balmer line radiation. Mechanisms by which the radiation from the gas can balance the heating by the fast protons were investigated, and minimum values for the mass of gas were estimated. Under certain conditions, the suprathermal atoms themselves can cool the ambient gas by rescattering the line radiation into the optically thin region in the wings of the line. This mechanism, called optical reverberation, can enhance the broad component of the hydrogen lines produced by inelastic atomic collisions and yield line widths consistent with those observed in Seyfert and quasar spectra. Also discussed is the possibility of achieving dynamic equilibrium of the ambient gas by balancing the momentum transfer from the suprathermals with gravitational attraction of a massive central source.

Ptak, R.↗

Nanostructured and wide bandgap CdS:O thin films grown by reactive RF sputtering

In this study, CdS:O thin films were prepared from a 99.999% CdS target by reactive sputtering in a Ar:O{sub 2} (99:1) ambient with different RF power at room temperature. The deposited films were studied by means of XRD, SEM, EDX, Hall Effect and UV-Vis spectrometry. The incorporations of O{sub 2} into the films were observed to increase with the decrease of deposition power. The cryatallinity of the films were reduced, whereas the band gaps of the films were increased by the increase of O{sub 2} content on the films. The films were found in nano-structured grains with a compact surface. It has been seen that the highest carrier density is observed in the film with O{sub 2} at.% 21.10, while the values decreased with the further increase or decrease of O{sub 2} content on the films; indicating that specific amount of donor like O{sub 2} atoms substitute to the S atoms can improve the carrier density of the CdS:O thin film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of the electrical contact area in contact-mode scanning probe microscopy

The tunneling current through an atomic force microscopy (AFM) tip is used to evaluate the effective electrical contact area, which exists between tip and sample in contact-AFM electrical measurements. A simple procedure for the evaluation of the effective electrical contact area is described using conductive atomic force microscopy (C-AFM) in combination with a thin dielectric. We characterize the electrical contact area for coated metal and doped-diamond tips operated at low force (<200 nN) in contact mode. In both cases, we observe that only a small fraction (<10 nm{sup 2}) of the physical contact (∼100 nm{sup 2}) is effectively contributing to the transport phenomena. Assuming this reduced area is confined to the central area of the physical contact, these results explain the sub-10 nm electrical resolution observed in C-AFM measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra low-K shrinkage behavior when under electron beam in a scanning electron microscope

In this paper, we investigate the tendency of porous low-K dielectrics (also named Ultra Low-K, ULK) behavior to shrink when exposed to the electron beam of a scanning electron microscope. Various experimental electron beam conditions have been used for irradiating ULK thin films, and the resulting shrinkage has been measured through use of an atomic force microscope tool. We report the shrinkage to be a fast, cumulative, and dose dependent effect. Correlation of the shrinkage with incident electron beam energy loss has also been evidenced. The chemical modification of the ULK films within the interaction volume has been demonstrated, with a densification of the layer and a loss of carbon and hydrogen elements being observed.

36 MATERIALS SCIENCE↗

Influence of substrate temperature on structural and optical properties of RF sputtered ZnMnO thin films

The ZnMnO thin films were deposited on glass substrates by radio frequency magnetron sputtering method. The properties of ZnMnO thin films were investigated by high-resolution x-ray diffractometer (HRXRD),atomic force microscopy (AFM), UV-Vis spectrometer and room temperature photoluminescence (PL), under the influence of substrate temperature. The substrate temperature was varied from 300, 400 and 500°C. With increasing the substrate temperature, the structure of the films changed from cubic to hexagonal. The cubic ZnMnO thin films grown along [210] direction, while the hexagonal ones grown along [002] direction. The changes in surface morphology provided a proof on the structural transition. Also, decrease and increase of optical band gap is associated with cubic or hexagonal structure of the films.

36 MATERIALS SCIENCE↗

Particle atomic layer deposition of alumina for sintering yttria-stabilized cubic zirconia

The addition of aluminum oxide (Al 2 O 3 ) as a sintering aid to yttria-stabilized zirconia (YSZ) reduces the required densification temperature. Sintering aids are incorporated using a number of processes which can lead to ambiguity when determining the effect of the sintering aid on the densification mechanism. In this study, a novel method for sintering aid addition, Particle Atomic Layer Deposition (ALD), was used to deposit an amorphous Al 2 O 3 thin film on YSZ particles. Transmission electron microscopy confirmed the deposition of conformal Al 2 O 3 thin films on the surface of the YSZ particles. The addition of Al 2 O 3 to YSZ reduced the temperature at which densification began by ~75 degrees C, and 2.2 wt% Al 2 O 3 addition resulted in a minimum activation energy for the intermediate stage of densification. This concentration is well in excess of the solubility limit of Al 2 O 3 in YSZ, showing that Al 2 O 3 does not enhance the densification of YSZ solely by dissolving into the YSZ lattice and activating volume diffusion. The addition of 0.7 wt% Al 2 O 3 with one Particle ALD cycle enhanced the ionic conductivity of YSZ by 23% after sintering at 1350 degrees C for 2 hours, demonstrating that dense parts with high oxygen ion conductivities can be produced after sintering at reduced temperatures. One Particle ALD cycle is a fast, easily scaled-up process that eliminates the use of solvents and has substantial cost/performance advantages over conventional processing.

36 MATERIALS SCIENCE↗

Spatial Atomic Layer Deposition of Aluminum Oxide as a Passivating Hole Contact for Silicon Solar Cells

In this work, tunneling aluminum oxide (Al 2 O 3 ) passivation layers are demonstrated to be a candidate for hole collecting, passivating contacts when coupled with a boron-doped surface. Here, these very thin Al 2 O 3 films (1.5-3 nm) are deposited using spatial atomic layer deposition (ALD) on boron diffused (110-115 Ω –1 ) hydrophilic surfaces operating as metal-insulator-semiconductor (MIS) contacts. Emitter saturation current density values of approximately ≈57 fA cm 2 are achieved for Al 2 O 3 film thicknesses of 2 nm before metallization. At this same thickness, contact resistivity values of 33 mΩ cm 2 are obtained after metallization. Most importantly, the boron diffusion, wet chemical surface preparation, and spatial ALD of Al 2 O 3 used to create these MIS structures were all performed with industrially relevant equipment on Cz wafers.

14 SOLAR ENERGY↗

Low Earth Orbital Atomic Oxygen Interactions With Materials

Atomic oxygen is formed in the low Earth orbital environment (LEO) by photo dissociation of diatomic oxygen by short wavelength (< 243 nm) solar radiation which has sufficient energy to break the 5.12 eV O2 diatomic bond in an environment where the mean free path is sufficiently long (~ 108 meters) that the probability of reassociation or the formation of ozone (O3) is small. As a consequence, between the altitudes of 180 and 650 km, atomic oxygen is the most abundant species. Spacecraft impact the atomic oxygen resident in LEO with sufficient energy to break hydrocarbon polymer bonds, causing oxidation and thinning of the polymers due to loss of volatile oxidation products. Mitigation techniques, such as the development of materials with improved durability to atomic oxygen attack, as well as atomic oxygen protective coatings, have been employed with varying degrees of success to improve durability of polymers in the LEO environment. Atomic oxygen can also oxidize silicones and silicone contamination to produce non-volatile silica deposits. Such contaminants are present on most LEO missions and can be a threat to performance of optical surfaces. The LEO atomic oxygen environment, its interactions with materials, results of space testing, computational modeling, mitigation techniques, and ground laboratory simulation procedures and issues are presented.

Banks, Bruce A.↗

Finite-size effect on two-particle production in continuous and discrete spectrum

The formalism allowing one to account for the effect of a finite space-time extent of particle production region is given. Its applications to the lifetime measurement of hadronic atoms produced by a high-energy beam in a thin target, as well as to the femtoscopy techniques widely used to measure space-time characteristics of the production processes, are discussed. Particularly, it is found that the neglect of the finite-size effect on the pionium lifetime measurement in the experiment DIRAC at CERN could lead to the lifetime overestimation comparable with the 10% statistical error. The theoretical systematic errors arising in the calculation of the finite-size effect due to the neglect of non-equal emission times in the pair center-of-mass system, the space-time coherence and the residual charge are shown to be negligible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Organic-Inorganic Reaction of Li-Containing thin film: Structure of Lithium Propane Dioxide via MLD

In combining organometallic with organic precursors, molecular layer deposition (MLD) offers not only an expanded portfolio of molecular combinations but specifically the possibility of tuning mechanical properties for more robust functionality. This is appealing for applications in energy storage, where ion transport in and out of electrodes causes significant stress/strain cycling. It is particularly opportune for Li-ion solid state batteries (LISSBs), where electrode and solid electrolyte structures are usually arranged densely for high power and energy. Despite diverse MLD applications to date, little prior research has been aimed at Li-containing MLD materials and processes. Here, we report the MLD growth and process for a lithium-containing organic thin film using lithium tert-butoxide (LiO t Bu) and 1,3-propanediol, leading to an MLD film of lithium propane dioxide, Li 2 O 2 C 3 H 6 (LPDO), identified through X-ray photoelectron spectroscopy (XPS) and ab initio calculations. The growth showed self-limiting behavior for both precursors, with significant nucleation delay before linear growth at 0.23 Å/cycle at 150 °C, and 0.15 Å/cycle at 200 °C. XPS-determined stoichiometry was Li 1.6 O 2.2 C 3 H 6 at both 150 and 200 °C, while additional species, presumably from incomplete reaction, were found at 100 °C, leading to a notably higher (0.84 Å/cycle) growth rate. The LPDO film showed crystallinity and high surface roughness when grown on the crystalline substrate, while on the amorphous substrate, an amorphous LPDO film with low surface roughness was observed. In addition, high air sensitivity of LPDO film was observed, with Li propyl carbonate and Li carbonate formation under air exposure. Further modification strategies were proposed in order to achieve a MLD or atomic layer deposition-/MLD-based solid electrolyte material.

25 ENERGY STORAGE↗

Atomic layer etching (ALE) of III-nitrides

Atomic layer etching (ALE) was performed on (Al, In, Ga)N thin films using a cyclic process of alternating Cl 2 gas absorption and Ar + ion bombardment in an inductively coupled plasma etcher system. The etch damage was characterized by comparing photoluminescence of blue single quantum well light-emitting diodes before and after the etch as well as bulk resistivities of etched p-doped layers. It was found that etched surfaces were smooth and highly conformal, retaining the step-terrace features of the as-grown surface, thus realizing ALE. Longer exposures to the dry etching increased the bulk resistivity of etched surfaces layers slightly, with a damaged depth of ∼55 nm. With further optimization and damage recovery, ALE is a promising candidate for controlled etching with atomic accuracy. Finally, it was found that Al 0.1 Ga 0.9 N acts as an etch barrier for the ALE etch, making it a suitable etch to reveal buried V-defects in III-nitride light emitting diodes.

Atomic-layer etching↗

Emerging edge states on the surface of the epitaxial semimetal CuMnAs thin film

Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here, we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with the expected semi-metallic behavior. An unexpected zigzag step edge surface reconstruction is observed with emerging electronic states below the Fermi energy. DFT calculations indicate that the step edge reconstruction can be attributed to an As deficiency that results in changes in the density of states of the remaining As atoms at the step edge. Furthermore, this understanding of the surface structure and step edges on the CuMnAs thin film will enable in-depth studies of its topological properties and magnetism.

36 MATERIALS SCIENCE↗

Atom lithography with near-resonant standing waves

We study the optimal focusing of two-level atoms with a near-resonant standing wave light, using both classical and quantum treatments of the problem in the thin- and thick-lens regimes. It is found that the near-resonant standing wave focuses the atoms with a reduced background in comparison with far-detuned light fields. For some parameters, the quantum atomic distribution shows even better localization than the classical one. Spontaneous emission effects are included via the technique of quantum Monte Carlo wave function simulations. We investigate the extent to which nonadiabatic and spontaneous emission effects limit the achievable minimal size of the deposited structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Space station solar concentrator materials research

The Space Station will represent the first time that a solar dynamic power system will be used to generate electrical power in space. In a system such as this, sunlight is collected and focused by a solar concentrator onto the receiver of a heat engine which converts the energy into electricity. The concentrator must be capable of collecting and focusing as much of the incident sunlight as possible, and it must also withstand the atomic oxygen bombardment which occurs in low Earth orbit (LEO). This has led to the development of a system of thin film coatings applied to the concentrator facet surface in a chamber designed especially for this purpose. The system of thin film coatings employed gives both the necessary degree of reflectance and the required protection from the LEO atomic oxygen environment.

Gulino, Daniel A.↗