Search NASA⌕ Search

SEARCH · Search NASA

Results for “benchmark problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Fundamental gap of fluorographene by many-body GW and fixed-node diffusion Monte Carlo methods

Fluorographene (FG) is a promising graphene-derived material with a large bandgap. Currently existing predictions of its fundamental gap (Δ f ) and optical gap (Δ opt ) significantly vary when compared with experiment. We provide here an ultimate benchmark of Δ f for FG by many-body GW and fixed-node diffusion Monte Carlo (FNDMC) methods. Both approaches independently arrive at Δf ≈ 7.1 ± 0.1 eV. In addition, the Bethe–Salpeter equation enabled us to determine the first exciton binding energy, Eb = 1.92 eV. We also point to the possible misinterpretation problem of the results obtained for gaps of solids by FNDMC with single-reference trial wave functions of Bloch orbitals. We argue why instead of Δ opt , in the thermodynamic limit,

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-helium S-wave model benchmark calculations. I. Single ionization and single excitation

A full four-body implementation of the propagating exterior complex scaling (PECS) method [J. Phys. B 37, L69 (2004)] is developed and applied to the electron-impact of helium in an S-wave model. Time-independent solutions to the Schroedinger equation are found numerically in coordinate space over a wide range of energies and used to evaluate total and differential cross sections for a complete set of three- and four-body processes with benchmark precision. With this model we demonstrate the suitability of the PECS method for the complete solution of the full electron-helium system. Here we detail the theoretical and computational development of the four-body PECS method and present results for three-body channels: single excitation and single ionization. Four-body cross sections are presented in the sequel to this article [Phys. Rev. A 81, 022716 (2010)]. The calculations reveal structure in the total and energy-differential single-ionization cross sections for excited-state targets that is due to interference from autoionization channels and is evident over a wide range of incident electron energies.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of the electron cooling simulation program for JLEIC

In the JLab Electron Ion Collider (JLEIC) project the traditional electron cooling technique is used to reduce the ion beam emittance at the booster ring, and to compensate the intrabeam scattering effect and maintain the ion beam emittance during collision at the collider ring. A new electron cooling process simulation program has been developed to fulfill the requirements of the JLEIC electron cooler design. The new program allows the users to calculate the electron cooling rate and simulate the cooling process with either DC or bunched electron beam to cool either coasting or bunched ion beam. It has been benchmarked with BETACOOL in aspect of accuracy and efficiency. In typical electron cooling process of JLEIC, the two programs agree very well and we have seen a significant improvement of computational speed using the new one. Being adaptive to the modern multicore hardware makes it possible to further enhance the efficiency for computationally intensive problems. The new program is being actively used in the electron cooling study and cooler design for JLEIC. We will present our models and some simulation results in this paper.

Zhang, He↗

The Electrolyte Genome project: A big data approach in battery materials discovery

We present a high-throughput infrastructure for the automated calculation of molecular properties with a focus on battery electrolytes. The infrastructure is largely open-source and handles both practical aspects (input file generation, output file parsing, and information management) as well as more complex problems (structure matching, salt complex generation, and failure recovery). Using this infrastructure, we have computed the ionization potential (IP) and electron affinities (EA) of 4830 molecules relevant to battery electrolytes (encompassing almost 55,000 quantum mechanics calculations) at the B3LYP/6-31+G(*) level. We describe automated workflows for computing redox potential, dissociation constant, and salt-molecule binding complex structure generation. We present routines for automatic recovery from calculation errors, which brings the failure rate from 9.2% to 0.8% for the QChem DFT code. Automated algorithms to check duplication between two arbitrary molecules and structures are described. We present benchmark data on basis sets and functionals on the G2-97 test set; one finding is that a IP/EA calculation method that combines PBE geometry optimization and B3LYP energy evaluation requires less computational cost and yields nearly identical results as compared to a full B3LYP calculation, and could be suitable for the calculation of large molecules. Our data indicates that among the 8 functionals tested, XYGJ-OS and B3LYP are the two best functionals to predict IP/EA with an RMSE of 0.12 and 0.27 eV, respectively. Application of our automated workflow to a large set of quinoxaline derivative molecules shows that functional group effect and substitution position effect can be separated for IP/EA of quinoxaline derivatives, and the most sensitive position is different for IP and EA. Published by Elsevier B.V

Battery↗

VpROM: a novel variational autoencoder-boosted reduced order model for the treatment of parametric dependencies in nonlinear systems

Reduced Order Models (ROMs) are of considerable importance in many areas of engineering in which computational time presents difficulties. Established approaches employ projection-based reduction, such as Proper Orthogonal Decomposition. The limitation of the linear nature of such operators is typically tackled via a library of local reduction subspaces, which requires the assembly of numerous local ROMs to address parametric dependencies. Our work attempts to define a more generalisable mapping between parametric inputs and reduced bases for the purpose of generative modeling. We propose the use of Variational Autoencoders (VAEs) in place of the typically utilised clustering or interpolation operations, for inferring the fundamental vectors, termed as modes, which approximate the manifold of the model response for any and each parametric input state. The derived ROM still relies on projection bases, built on the basis of full-order model simulations, thus retaining the imprinted physical connotation. However, it additionally exploits a matrix of coefficients that relates each local sample response and dynamics to the global phenomena across the parametric input domain. The VAE scheme is utilised for approximating these coefficients for any input state. This coupling leads to a high-precision low-order representation, which is particularly suited for problems where model dependencies or excitation traits cause the dynamic behavior to span multiple response regimes. Moreover, the probabilistic treatment of the VAE representation allows for uncertainty quantification on the reduction bases, which may then be propagated to the ROM response. The performance of the proposed approach is validated on an open-source simulation benchmark featuring hysteresis and multi-parametric dependencies, and on a large-scale wind turbine tower characterised by nonlinear material behavior and model uncertainty.

Conditional VAEs↗

Toward first principles-based simulations of dense hydrogen

Accurate knowledge of the properties of hydrogen at high compression is crucial for astrophysics (e.g., planetary and stellar interiors, brown dwarfs, atmosphere of compact stars) and laboratory experiments, including inertial confinement fusion. There exists experimental data for the equation of state, conductivity, and Thomson scattering spectra. However, the analysis of the measurements at extreme pressures and temperatures typically involves additional model assumptions, which makes it difficult to assess the accuracy of the experimental data rigorously. On the other hand, theory and modeling have produced extensive collections of data. They originate from a very large variety of models and simulations including path integral Monte Carlo (PIMC) simulations, density functional theory (DFT), chemical models, machine-learned models, and combinations thereof. At the same time, each of these methods has fundamental limitations (fermion sign problem in PIMC, approximate exchange–correlation functionals of DFT, inconsistent interaction energy contributions in chemical models, etc.), so for some parameter ranges accurate predictions are difficult. Recently, a number of breakthroughs in first principles PIMC as well as in DFT simulations were achieved which are discussed in this review. Here we use these results to benchmark different simulation methods. We present an update of the hydrogen phase diagram at high pressures, the expected phase transitions, and thermodynamic properties including the equation of state and momentum distribution. Furthermore, we discuss available dynamic results for warm dense hydrogen, including the conductivity, dynamic structure factor, plasmon dispersion, imaginary-time structure, and density response functions. We conclude by outlining strategies to combine different simulations to achieve accurate theoretical predictions that are based on first principles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlation matrix renormalization theory for correlated-electron materials with application to the crystalline phases of atomic hydrogen

Developing accurate and computationally efficient methods to calculate the electronic structure and total energy of correlated-electron materials has been a very challenging task in condensed matter physics and materials science. Recently, we have developed a correlation matrix renormalization (CMR) method which does not assume any empirical Coulomb interaction U parameters and does not have double counting problems in the ground-state total energy calculation. The CMR method has been demonstrated to be accurate in describing both the bonding and bond breaking behaviors of molecules. In this study, we extend the CMR method to the treatment of electron correlations in periodic solid systems. By using a linear hydrogen chain as a benchmark system, we show that the results from the CMR method compare very well with those obtained recently by accurate quantum Monte Carlo (QMC) calculations. We also study the equation of states of three-dimensional crystalline phases of atomic hydrogen. We show that the results from the CMR method agree much better with the available QMC data in comparison with those from density functional theory and Hartree-Fock calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrasound viscoelasticity assessment using an adaptive torsional shear wave propagation method

Purpose: Different approaches have been used in dynamic elastography to assess mechanical properties of biological tissues. Most techniques are based on a simple inversion based on the measurement of the shear wave speed to assess elasticity, whereas some recent strategies use more elaborated analytical or finite element method (FEM) models. In this study, a new method is proposed for the quantification of both shear storage and loss moduli of confined lesions, in the context of breast imaging, using adaptive torsional shear waves (ATSWs) generated remotely with radiation pressure. Methods: A FEM model was developed to solve the inverse wave propagation problem and obtain viscoelastic properties of interrogated media. The inverse problem was formulated and solved in the frequency domain and its robustness to noise and geometric constraints was evaluated. The proposed model was validated in vitro with two independent rheology methods on several homogeneous and heterogeneous breast tissue-mimicking phantoms over a broad range of frequencies (up to 400 Hz). Results: Viscoelastic properties matched benchmark rheology methods with discrepancies of 8%–38% for the shear modulus G′ and 9%–67% for the loss modulus G″. The robustness study indicated good estimations of storage and loss moduli (maximum mean errors of 19% on G′ and 32% on G″) for signal-to-noise ratios between 19.5 and 8.5 dB. Larger errors were noticed in the case of biases in lesion dimension and position. Conclusions: The ATSW method revealed that it is possible to estimate the viscoelasticity of biological tissues with torsional shear waves when small biases in lesion geometry exist.

60 APPLIED LIFE SCIENCES↗

cuTS: Scaling Subgraph Isomorphism on Distributed Multi-GPUSystems Using Trie Based Data Structure

Subgraph isomorphism is a pattern-matching algorithm widely used in many domains such as chem-informatics, bioinformatics, databases, and social network analysis. It is computationally expensive and is a proven NP-hard problem. The massive parallelism offered by the GPU hardware is well suited for solving the subgraph isomorphism. However, current GPU implementations are far from the achievable performance. Moreover, the enormous memory requirement of current approaches limits the problem size that can be handled. This work analyzes the fundamental challenges associated with processing the subgraph isomorphism on GPUs and develops an efficient GPU hardware-aware implementation. We also develop a new GPU-friendly trie-based data structure to drastically reduce the intermediate storage space requirement. Hence, our approach runs larger benchmarks than the competitors. We also develop the first distributed sub-graph isomorphism algorithm for GPUs. Our experimental evaluation section demonstrates the efficacy of our approach by comparing the execution time and number of cases that we can handle against the state-of-the-art GPU implementations.

Xiang, Lizhi↗

Benchmark study for charge deposition by high energy electrons in thick slabs

The charge deposition profiles created when highenergy (1, 10, and 100 MeV) electrons impinge ona thick slab of elemental aluminum, copper, andtungsten are presented in this paper. The chargedeposition profiles were computed using existing representative Monte Carlo codes: TIGER3.0 (1D module of ITS3.0) and MCNP version 4B. The results showed that TIGER3.0 and MCNP4B agree very well (within ~20% of each other) in the majority of the problem geometry. The TIGER results were considered to be accurate based on previous studies. Thus, it was demonstrated that MCNP, with its powerful geometry capability and flexible source and tally options, could be used in calculations of electron charging in high energy electron-rich space radiation environments.

charging high energy electrons ITS MCNP↗

Convolutional neural networks for intra-hour solar forecasting based on sky image sequences

Accurate and timely solar forecasts play an increasingly critical role in power systems. Compared to longer forecasting timescales, very short-term solar forecasting has lagged behind in both research and practice. In this paper, we propose deep convolutional neural networks (CNNs) to provide operational intra-hour (10-minute-ahead to 60-minute-ahead) solar forecasts. We develop two CNN structures inspired by a widely-used CNN architecture. The CNNs are tailored to our solar forecasting regression tasks and rely solely on sky image sequences. Case studies based on six years of data (over 150,000 data points) demonstrate that the best CNN model has forecast skill scores of 20%-39% over the naive persistence of cloudiness benchmark, even at these very short timescales. The CNNs also have consistently superior performance when compared to shallow machine learning models with meteorological predictors, where the improvement averages around 7%. The sensitivity analyses show that the sky image length, resolution, and weather conditions have impacts on the deep learning model accuracy. In our intra-hour problem with specific setups, two sky images with a 10-minute 128 x 128 resolution yield the most accurate forecasts. Current limitations, future work, and deployment challenges and solutions are also discussed.

14 SOLAR ENERGY↗

HALO: A full-orbit model of nonlinear interaction of fast particles with eigenmodes

HALO (HAgis LOcust) solves the initial value Vlasov-Maxwell problem perturbatively for application to certain nonlinear wave-particle problems in tokamak plasmas. It uses the same basic approach as the HAGIS code for wave evolution but is built on the LOCUST-GPU full-orbit code for the solution of the Hamiltonian fast particle motion in cylindrical coordinates. The wave amplitude and particle evolution include all finite Larmour radius effects. We describe and benchmark the currently implemented Alfvén eigenmode workflow, demonstrating correct particle motion, linear and nonlinear power transfer. Here, the formulation and numerical scheme are sufficiently general as to allow easy future implementation of different kinds of eigenmodes, such as modes close to the ion-cyclotron frequency. The code can model multiple eigenmodes and multiple fast ion species simultaneously, and supports the general form of the equilibrium distribution in constants of motion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Machine Learning in Geoscience: Riding a Wave of Progress

The geosciences are data rich, with petabytes of readily and publicly available data. This availability, combined with the complexity of unsolved problems in the field, has motivated vigorous interest in the application of machine learning (ML) techniques. ML offers a new “lens” for viewing data and scientific hypotheses that differs from the perspective of traditional domain expertise. Initial uses of ML have tended to be limited in scope and isolated in application, but recent efforts to promote benchmark geoscientific data sets and competitions promise to propel broader, deeper, and increasingly coordinated and collaborative efforts.

58 GEOSCIENCES↗

On the isotropic Raman spectrum of Ar{sub 2} and how to benchmark ab initio calculations of small atomic clusters: Paradox lost

This is the long-overdue answer to the discrepancies observed between theory and experiment in Ar{sub 2} regarding both the isotropic Raman spectrum and the second refractivity virial coefficient, B{sub R} [Gaye et al., Phys. Rev. A 55, 3484 (1997)]. At the origin of this progress is the advent (posterior to 1997) of advanced computational methods for weakly interconnected neutral species at close separations. Here, we report agreement between the previously taken Raman measurements and quantum lineshapes now computed with the employ of large-scale CCSD or smartly constructed MP2 induced-polarizability data. By using these measurements as a benchmark tool, we assess the degree of performance of various other ab initio computed data for the mean polarizability α, and we show that an excellent agreement with the most recently measured value of B{sub R} is reached. We propose an even more refined model for α, which is solution of the inverse-scattering problem and whose lineshape matches exactly the measured spectrum over the entire frequency-shift range probed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Path Finding for Maximum Value of Information in Multi-Modal Underwater Wireless Sensor Networks

Here, we consider underwater multi-modal wireless sensor networks (UWSNs) suitable for applications on submarine surveillance and monitoring, where nodes offload data to a mobile autonomous underwater vehicle (AUV) via optical technology, and coordinate using acoustic communication. Sensed data are associated with a value, decaying in time. In this scenario, we address the problem of finding the path of the AUV so that the Value of Information (VoI) of the data delivered to a sink on the surface is maximized. We define a Greedy and Adaptive AUV Path-finding (GAAP) heuristic that drives the AUV to collect data from nodes depending on the VoI of their data. For benchmarking the performance of AUV path-finding heuristics, we define an integer linear programming (ILP) formulation that accurately models the considered scenario, deriving a path that drives the AUV to collect and deliver data with the maximum VoI. In our experiments GAAP consistently delivers more than 80 percent of the theoretical maximum VoI determined by the ILP model. We also compare the performance of GAAP with that of other strategies for driving the AUV among sensing nodes, namely, random paths, TSP-based paths and a “lawn mower”-like strategy. Our results show that GAAP always outperforms every other heuristic in terms of delivered VoI, also obtaining higher energy efficiency.

47 OTHER INSTRUMENTATION↗

Analysis of high-order languages for use on space station application software

Considered in this study is the general and not easily resolved problem of how to choose the right programming language for a particular task. This is specialized to the question of which versions of what languages should be chosen for the multitude of tasks that the Marshall Space Flight Center will be responsible for in the Space Station. Four criteria are presented: theoretical considerations, quantitative matrices, qualitative benchmarks, and the monitoring of programmers. Specific recommendations for future studies are given to resolve these questions for the Space Station.

Knoebel, A.↗

Spectroscopic Determination of the Physical Conditions in Hot Optically Thin Sources

The Astrophysics Plasma Emission Code and Database (APEC/APED), developed in part under this grant, have been upgraded to ATOMDB Version 1.3.1: and are now beginning to find widespread applications t o X-ray spectral data from Chandra and XMM-Newton (37 citations in published work, according to the ADS, plus numerous other conference and prepublication papers).ATOMDB is now linked through the Plasma Gate website: http://plasma-gate.weizmann.ac.il/DBfAPP.html. The major difference from Version 1.3.0 is that the new models naw ex- tend t o 50 keV rather than stopping at 10 keV. This means that ATOMDB can be used with redshifted observations. There are minor differences in emissivities due t o radiative recombination and cascades. Stellar coronae are being used to benchmark the atomic data in APED as part of the Emission Line Project. The models appear to be in good agreement with the observations for most of the strong lines; however, we have identified significant discrepancies in the 3s/3d line ratios not only for Fe XVII, but also for Fe XVIII and XIX. The Fe XVII problem has been known from solar observations, and is currently being tested under EBIT laboratory conditions by two groups. The Fe XVIII problem is substantially worse, but perhaps will shed light on the relevant underlying theoretical issues. Ming-Feng Gu has recently published new calculations, which we are comparing with APEC and with the obser- vations. His calculations appear to improve the emissivities of lines affected by cascades, but other problems remain.

Brickhouse, Nancy S.↗

Verification of a Configuration Space Method for Evaluating the All-Orders Linear Kinetic Plasma Response to RF Power

Progress towards verification of a configuration space algorithm for evaluating the linear kinetic plasma current response to applied radio-frequency power is presented. This follows a previously published [1] verification of the parallel-only response, by verifying the perpendicular response required for much of the ion-and electron-cyclotron range of frequencies. In particular, we use the Colestock-Kashuba fast-wave to ion-Bernstein-wave benchmark [2] where we show that the Kinetic-J computational kernel is able to reproduce a known reference solution calculated via the AORSA full-wave code [3]. We also discuss the computational and scaling aspects of this novel approach, as well as the difficulties presented by the temporal scales in this multi-species problem.

Green, David↗