Search NASA⌕ Search

SEARCH · Search NASA

Results for “comparisons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Comparisons between the TOPLHA and the ALOHA codes on Lower Hybrid antenna coupling

Comparisons have been made between TOPLHA and ALOHA, two codes for Lower Hybrid antenna coupling to cold inhomogeneous plasmas, on the Tore-Supra C2 multi-junction and an ITER relevant Passive-Active Multi-junction (PAM). Calculation for several plasma scenarios of reflexion coefficients and launched spectra are in good agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of ICRF-Induced Ion Diffusion Coefficients Calculated with the DC and AORSA Codes

The DC (Diffusion Coefficient) code obtains RF diffusion coefficients by direct numerical integration of the Lorentz force equation for ion motion in the combined equilibrium fields and the RF full wave EM fields from the AORSA full-wave code. Suitable averaging over initial gyro- and toroidal-angle of coordinate 'kicks' after a bounce-period, gives noise-free bounce-averaged diffusion coefficients. For direct comparison with zero-banana-width coefficients from AORSA, perpendicular-drift terms in the Lorentz equation are subtracted off the integration. The DC code has been coupled to the CQL3D Fokker-Planck code. For a C-Mod minority ion ICRF heating test case, the total power absorption using the diffusion coefficients agree well, and the profiles are similarly close. This supports the DC calculation and the Kennel-Engelmann-based, no-correlations, coefficient calculation in AORSA. However, resonance correlations cause large differences in the pitch angle variations of the diffusion coefficients, and in the resulting evolution of the ion distribution functions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PBX 9404 detonation copper cylinder tests: a comparison of new and aged material

We present detonation copper cylinder test results on aged PBX 9404 (94 wt% HMX, 3 wt% CEF, 2.9 wt% NC, 0.1 wt% DPA) explosive. The charges were newly pressed from 37.5 year-old molding powder. We compare these results to equivalent data performed on the same lot when it was 3.5 years old. Comparison of the detonation energy inferred from detonation speed to that inferred from wall motion suggests that the HMX energy is unchanged but the NC energy has decreased to {approx}25% of its original value. The degradation of explosives and their binders is a subject of continual interest. Secondary explosives such as HMX are sufficiently stable near room temperature that they do not measurably degrade over a period of at least several decades. For formulated systems the bigger concern is binder degradation, for which the three main issues are strength, initiation safety, and (if the binder is energetic) energy content. In this paper we examine the detonation energy of new and aged PBX 9404 (94 wt% HMX, 3 wt% tris-{beta} chloroethylphosphate (CEF), 2.9 wt% nitrocellulose (NC), 0.1 wt% diphenylamine (DPA) [1, 2]), measured via the detonation copper cylinder test. In 1959, two independent PBX 9404 accidents [3] raised serious concerns about the safety of the formulation. Over about a decade's time, Los Alamos pursued a safer, energetically equivalent replacement, which ultimately became PBX 9501. In order to accurately compare the performance of the PBX 9404 and PBX 9501 formulations, W. Campbell and R. Engelke (C & E) developed a stringent cylinder test protocol that they called the Los Alamos Precision Cylinder Test [4]. The present aging study is possible because excellent PBX 9404 data from those qualification tests endures.

66↗

COMPARISON OF THEORY AND MEASUREMENTS OF A TWO-STAGE LIGHT-GAS GUN

A comparison of techniques for obtaining projectile velocity history on a two-stage launcher and discuss gun code accuracy vis-a-vis pressure gauges and the new photonic Doppler velocimetry (PDV) technique is presented. The PDV technique itself is described in a companion paper. The PDV records were differentiated to compute acceleration and, hence, base pressure. Two acceleration episodes are revealed in the data. Base pressure values were compared with measurements from stationary pressure gauges and with predictions of a standard two-stage gun code. The agreement with the pressure gages was satisfactory. Code predictions did not account for the two acceleration stages. However, for the main acceleration episode, the predicted base pressure is in good agreement with the smoothed pressure computed from the PDV record. Both the gauge records and PDV contain short-time pressure spikes which are apparently real. Therefore, use of computed base pressure for projectile design may lead to failures if the projectile is vulnerable to pressure spikes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of kinetic theory models of laser ablation of carbon

The paper compares the predictions of three-dimensional kinetic theory models of laser ablation of carbon. All the models are based on the moment solution of the Boltzmann equation for arbitrary strong evaporation but use different approximations. Comparison of the model predictions demonstrated that the choice of the particular model has very little influence on the results. The influence of the heat conduction from the gas to the solid phase was also found to be negligible in this problem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of T{sub z} = +-1->0 GT Transitions Studied in beta--decay and CE Reactions

Gamow-Teller (GT) transitions can be studied in both beta- decay and charge exchange(CE) reactions. If isospin is a good quantum number, then the T{sub z} = -1->0 and T{sub z} = +1->0 GT mirror transitions, are identical. Therefore, a comparison of the results from studies of beta decay and CE should shed light on this assumption. Accordingly we have studied the beta decay of the T{sub z} = -1 fp-shell nuclei, {sup 54}Ni, {sup 50}Fe, {sup 46}Cr, and {sup 42}Ti, produced in fragmentation and we have compared our results with the spectra from (3He, t) measurements on the mirror T{sub z} = +1 target nuclei studied in high resolution at RCNP, Osaka. The experiments were performed as part of the STOPPED beam RISING campaign at GSI.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison Of Expected Yields For Light Radioactive Beams At SPIRAL-1 And 2

Light-particles stable high-intensity beams (p, d, {sup 3,4}He...) will be available from the Linac driver accelerator of SPIRAL-2. Yields of neutron-deficient isotopes as well as of neutron-rich isotopes (by means of reactions with secondary neutrons) are compared with those presently available at the SPIRAL-1 facility. We explore, for light beams (Z<16) asked in the 'white book' of SPIRAL-2, the production methods taking into account the in-target yield but also the feasibility of making such beams by the ISOL method (considering reaction, target, thermal and release properties). We discuss some of the tests needed and planned. A comparison with the present and potentially attainable yields at SPIRAL-1 is presented.

43 PARTICLE ACCELERATORS↗

Comparisons of classical and Wigner sampling of transition state energy levels for quasiclassical trajectory chemical dynamics simulations

Quasiclassical trajectory calculations are compared, with classical and Wigner sampling of transition state (TS) energy levels, for C{sub 2}H{sub 5}F{sup {ne}{yields}H}F+C{sub 2}H{sub 4} product energy partitioning and [Cl{center_dot}{center_dot}{center_dot}CH{sub 3}{center_dot}{center_dot}{center_dot}Cl]{sup -} central barrier dynamics. The calculations with Wigner sampling are reported here for comparison with the previously reported calculations with classical sampling [Y. J. Cho et al., J. Chem. Phys. 96, 8275 (1992); L. Sun and W. L. Hase, J. Chem. Phys. 121, 8831 (2004)]. The C{sub 2}H{sub 5}F{sup {ne}} calculations were performed with direct dynamics at the MP2/6-31G* level of theory. Classical and Wigner sampling give post-transition state dynamics, for these two chemical systems, which are the same within statistical uncertainties. This is a result of important equivalences in these two sampling methods for selecting initial conditions at a TS. In contrast, classical and Wigner sampling often give different photodissociation dynamics [R. Schinke, J. Phys. Chem. 92, 3195 (1988)]. Here the sampling is performed for a vibrational state of the ground electronic state potential energy surface (PES), which is then projected onto the excited electronic state's PES. Differences between the ground and the excited PESs may give rise to substantially different excitations of the vibrational and dissociative coordinates on the excited state PES by classical and Wigner sampling, resulting in different photodissociation dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NAA For Human Serum Analysis: Comparison With Conventional Analyses

Instrumental and Comparator methods of Neutron Activation Analysis (NAA) were applied to determine elements of clinical relevancy in serum samples of adult population (Sao Paulo city, Brazil). A comparison with the conventional analyses, Colorimetric for calcium, Titrymetric for chlorine and Ion Specific Electrode for sodium and potassium determination were also performed permitting a discussion about the performance of NAA methods for clinical chemistry research.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Comparison of T{sub z} = {+-}1{yields}0 GT Transitions

Gamow-Teller (GT) transitions can be studied in both {beta}-decay and charge exchange(CE) reactions. If isospin is a good quantum number, then the T{sub z} = -1{yields}0 and T{sub z} = +1{yields}0 GT mirror transitions, are identical. Therefore, a comparison of the results from studies of {beta} decay and CE should shed light on this assumption. Accordingly we have studied the {beta} decay of the T{sub z=-1} fp-shell nuclei, {sup 54}Ni, {sup 50}Fe, {sup 46}Cr, and {sup 42}Ti, produced in fragmentation and we have compared our results with the spectra from ({sup 3}He, t) measurements on the mirror T{sub z} = +1 target nuclei studied in high resolution at RCNP, Osaka. The {beta}-decay experiments were performed as part of the STOPPED beam RISING campaign at GSI.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Density-functional approaches to non-bonding interactions: a comparison of dispersion corrections (DFT-D), exchange-hole dipole moment (XDM) theory, and specialized functionals

A systematic study of techniques for treating non-covalent interactions within the computationally efficient density functional theory (DFT) framework is presented through comparison to benchmark-quality evaluations of binding strength com- piled for molecular complexes of diverse size and nature. In particular, the effi- cacy of functionals deliberately crafted to encompass long-range forces, a posteri- ori DFT+dispersion corrections (DFT-D2 and DFT-D3), and exchange-hole dipole moment (XDM) theory is assessed against a large collection (469 energy points) of reference interaction energies at the CCSD(T) level of theory extrapolated to the estimated complete basis set limit. The established S22 and JSCH test sets of minimum-energy structures, as well as collections of dispersion-bound (NBC10) and hydrogen-bonded (HBC6) dissociation curves and a pairwise decomposition of a protein-ligand reaction site (HSG), comprise the chemical systems for this work. From evaluations of accuracy, consistency, and efficiency for PBE-D, BP86-D, B97-D, PBE0-D, B3LYP-D, B970-D, M05-2X, M06-2X, ωB97X-D, B2PLYP-D, XYG3, and B3LYP-XDM methodologies, it is concluded that distinct, often contrasting, groups of these elicit the best performance within the accessible double-ζ or robust triple-ζ basis set regimes and among hydrogen-bonded or dispersion-dominated complexes. For overall results, M05-2X, B97-D3, and B970-D2 yield superior values in conjunc- tion with aug-cc-pVDZ, for a mean absolute deviation of 0.41 – 0.49 kcal/mol, and B3LYP-D3, B97-D3, ωB97X-D, and B2PLYP-D3 dominate with aug-cc-pVTZ, af- fording, together with XYG3/6-311+G(3df,2p), a mean absolute deviation of 0.33 – 0.38 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Martensitic Transition in Nitinol Wire: A Comparison of X-ray Diffraction and Other Techniques

Martensitic to austenite transformation in Nitinol wire can be measured by a number of techniques such as XRD (X-Ray Diffraction), DSC (Differential Scanning Calorimetry), BFR (Bend and Free Recovery) and Vickers indentation recovery. A comparison of results from these varied characterisation techniques is reported here to obtain a greater understanding of the thermal-elastic-structural changes associated with martensitic transformation. The transformation temperatures measured by DSC were found to correspond well with the structural and mechanical information obtained from XRD, BFR and Vickers indent recovery methods. Indent recovery is a relatively new and accurate method of monitoring stress induced martensitic transformations in NiTi and is one of only a few methods of stress inducing martensitic transformation in large scale samples. It is especially useful for NiTi in the as-cast billet form, where tensile testing is impossible. BFR is uniquely popular in the NiTi wire manufacturing sector and is recognised as the most accurate method of measuring the transformation temperature. Here the material is stressed to a representative in-service stress level during the test. No other test uses the shape memory effect for measuring the transformation temperature of NiTi. The results show that the DSC thermogram and XRD diffractogram have a peak overlap which is a common occurrence in NiTi that has been extensively processed. The XRD method further explains the observations in the DSC thermogram and in combination they confirm the transformation temperature.

36 MATERIALS SCIENCE↗

A Numerical Approach and Comparison of Cutting Forces and Chip Morphology in Orthogonal Cutting of Light Alloys

This paper deals with the simulation of UNS A92024 aluminium alloy cutting processes. In particular, 2D and 3D Finite Element Method (FEM) simulations were carried out in order to estimate cutting forces and chip morphology during turning operations. The material is modelled with two different set of parameters for the Johnson--Cook's (J-C) constitutive equation and a failure Cockroft and Latham's model exploited considers damage. The comparison between the predicted chip morphology and principal cutting forces at varying of J-C parameters and cutting regimes with those experimentally found are presented and discussed. The paper shows the importance of damage criterion in the cutting forces, during the simulation, especially in 3D.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Comparison of scrape-off layer turbulence simulations with experiments using a synthetic gas puff imaging diagnostic

A synthetic gas puff imaging (GPI) diagnostic has been added to the scrape-off layer turbulence (SOLT) simulation code, enabling comparisons with GPI data from the National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40, 557 (2000)]. The edge and scrape-off layer are modeled in the radial and poloidal (bidirectional) dimensions of the outboard midplane region of NSTX. A low-confinement mode discharge is simulated by choosing reference parameters, including radial density and temperature profiles, to be consistent with those of the shot (no. 112825). NSTX and simulation GPI data are submitted to identical analyses. It is demonstrated that the level of turbulent fluctuations in the simulation may be adjusted to give synthetic GPI radial intensity profiles similar to those of the experiment; for a ''best-case'' simulation, SOLT and NSTX probability distribution functions of blob radial locations, widths, and GPI image velocities are compared. For the simulation, synthetic GPI image velocity and fluid convection (ExB) velocity are compared and contrasted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

State-resolved investigation of the photodesorption dynamics of NO from (NO){sub 2} on Ag nanoparticles of various sizes in comparison with Ag(111)

The translational and internal state energy distributions of NO desorbed by laser light (2.3, 3.5, and 4.7 eV) from adsorbed (NO){sub 2} on Ag nanoparticles (NPs) (mean diameters, D= 4, 8, and 11 nm) have been investigated by the (1 + 1) resonance enhanced multiphoton ionization technique. For comparison, the same experiments have also been carried out on Ag(111). Detected NO molecules are hyperthermally fast and both rotationally and vibrationally hot, with temperatures well above the sample temperature. The translational and rotational excitations are positively correlated, while the vibrational excitation is decoupled from the other two degrees of freedom. Most of the energy content of the desorbing NO is contained in its translation. The translational and internal energy distributions of NO molecules photodesorbed by 2.3, 3.5, and in part also 4.7 eV light are approximately constant as a function of Ag NPs sizes, and they are the same on Ag(111). This suggests that for these excitations a common mechanism is operative on the bulk single crystal and on NPs, independent of the size regime. Notably, despite the strongly enhanced cross section seen on NP at 3.5 eV excitation energy in p-polarization, i.e., in resonance with the plasmon excitation, the mechanism is also unchanged. At 4.7 eV and for small particles, however, an additional desorption channel is observed which results in desorbates with higher energies in all degrees of freedom. The results are well compatible with our earlier measurements of size-dependent translational energy distributions. We suggest that the broadly constant mechanism over most of the investigated range runs via a transient negative ion state, while at high excitation energy and for small particles the transient state is suggested to be a positive ion.

36 MATERIALS SCIENCE↗

An in-plane tensile test for rheological and formability identification: comparison between experimental and numerical FLC

Both accurate constitutive laws and formability limits of materials are essential for a numerical optimization of sheet forming processes. To identify these behaviors, experimental databases are needed. In this work, experiments are performed from a biaxial device able to give for a unique in-plane specimen a good prediction of rheological parameters and formability. The proposed device is a servo-hydraulic testing machine provided with four independent dynamic actuators. By localizing necking in the central zone of the specimen, the strain path in this zone is controlled by the speed ratio between the two axes and the whole forming limit diagram can be covered. The experimental forming limit curve for the aluminium alloy AA5086 is determined thanks to a rigorous procedure for detecting the onset of necking in the specimen. Material parameters (constants of both hardening law and anisotropic yield criterion) are identified from the global measurement of force versus displacement curves by means of an inverse analysis procedure. Comparison between experimental and numerical forming limit curves are presented. For the numerical FLCs, two sets of material parameters are compared, the former is identified through the classical uniaxial test and the latter thanks to the dedicated cruciform specimen.

36 MATERIALS SCIENCE↗

Thermoelastic properties of ReB[subscript 2] at high pressures and temperatures and comparison with Pt, Os, and Re

We have measured the phase stability and thermoelastic equation of state of ultrahard rhenium diboride at pressures up to 30 GPa and temperatures up to 2500 K using a laser heated diamond anvil cell in conjunction with synchrotron X-ray diffraction. ReB{sub 2} is shown to be stable throughout this pressure and temperature region. The ratio of the c-axis to the a-axis provides a monitor of the annealing of plastic stresses during compression. We show that ReB{sub 2} has a small thermal anisotropy but a large mechanical anisotropy. Combining this new data set with previously existing results from a large volume press yields a thermoelastic equation of state with a Grueneisen parameter of 2.4 (0.08) and a q of 2.7. A comparison of ReB{sub 2} with other high electron density incompressible metals - Os, Re, and Pt - shows that ReB{sub 2} has the lowest thermal pressure and the highest bulk modulus.

36 MATERIALS SCIENCE↗