Search NASA⌕ Search

SEARCH · Search NASA

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Spatially and temporally resolved plasma parameter estimations of laser heated MagLIF relevant gas pipes at NIF

The ability to control laser pre-heat is an integral part of the inertial confinement fusion concept known as Magnetized Liner Inertial Fusion. This process is studied at the National Ignition Facility (NIF) where 4 of the 192 laser beams are propagated through a 1-cm long gas cell where they deposit >20 kJ of energy into the gaseous fuel via inverse bremsstrahlung absorption. This process ionizes the gas, producing a plasma that follows behind the laser front and expands over the radius of the cell. Emission from this plasma, as viewed by a gated x-ray detector, can be used to build spatially and temporally resolved estimations of the pre-heat plasma's density and temperature profiles. This can then be used to estimate the plasma pressure, internal energy, and radiation losses. Estimations show the evolution of the plasma in magnetized and unmagnetized gas cells filled with ambient temperature neopentane (C5H12) +1% Ar, as well as unmagnetized cryogenically cooled (32 K) deuterium +1% Ne filled targets. This analysis shows the effects of initial gas-fill density, composition, and axial magnetization on the time-dependent plasma parameters. Previously, these parameters at the NIF had not been experimentally characterized, and these estimations provided a potential new means of testing radiation magneto-hydrodynamic predictive capability models. Results in unmagnetized targets have strong agreement with simulations. However, in targets with a 19 T applied axial magnetic field, this method yields electron temperatures up to 100% hotter than those predicted by HYDRA codes.

Bremsstrahlung↗

Estimating CDM particle trajectories in the mildly non-linear regime of structure formation. Implications for the density field in real and redshift space

We obtain approximations for the CDM particle trajectories starting from Lagrangian Perturbation Theory. These estimates for the CDM trajectories result in approximations for the density in real and redshift space, as well as for the momentum density that are better than what standard Eulerian and Lagrangian perturbation theory give. For the real space density, we find that our proposed approximation gives a good cross-correlation ( > 95%) with the non-linear density down to scales almost twice smaller than the non-linear scale, and six times smaller than the corresponding scale obtained using linear theory. This allows for a speed-up of an order of magnitude or more in the scanning of the cosmological parameter space with N-body simulations for the scales relevant for the baryon acoustic oscillations. Possible future applications of our method include baryon acoustic peak reconstruction, building mock galaxy catalogs, momentum field reconstruction.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE ORIGIN OF THE HIGH COLUMN DENSITY TURNOVER IN THE H I COLUMN DENSITY DISTRIBUTION

We study the high column density regime of the H I column density distribution function and argue that there are two distinct features: a turnover at N{sub H{sub I}} Almost-Equal-To 10{sup 21} cm{sup -2}, which is present at both z = 0 and z Almost-Equal-To 3, and a lack of systems above N{sub H{sub I}} Almost-Equal-To 10{sup 22} cm{sup -2} at z = 0. Using observations of the column density distribution, we argue that the H I-H{sub 2} transition does not cause the turnover at N{sub H{sub I}} Almost-Equal-To 10{sup 21} cm{sup -2} but can plausibly explain the turnover at N{sub H{sub I}} {approx}> 10{sup 22} cm{sup -2}. We compute the H I column density distribution of individual galaxies in the THINGS sample and show that the turnover column density depends only weakly on metallicity. Furthermore, we show that the column density distribution of galaxies, corrected for inclination, is insensitive to the resolution of the H I map or to averaging in radial shells. Our results indicate that the similarity of H I column density distributions at z = 3 and 0 is due to the similarity of the maximum H I surface densities of high-z and low-z disks, set presumably by universal processes that shape properties of the gaseous disks of galaxies. Using fully cosmological simulations, we explore other candidate physical mechanisms that could produce a turnover in the column density distribution. We show that while turbulence within giant molecular clouds cannot affect the damped Ly{alpha} column density distribution, stellar feedback can affect it significantly if the feedback is sufficiently effective in removing gas from the central 2-3 kpc of high-redshift galaxies. Finally, we argue that it is meaningful to compare column densities averaged over {approx} kpc scales with those estimated from quasar spectra that probe sub-pc scales due to the steep power spectrum of H I column density fluctuations observed in nearby galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

DARK MATTER DISTRIBUTION IN GALAXY GROUPS FROM COMBINED STRONG LENSING AND DYNAMICS ANALYSIS

Using a combined analysis of strong lensing and galaxy dynamics, we characterize the mass distributions and the mass-to-light (M/L) ratios of galaxy groups, virialized structures in the mass range of few x 10{sup 14} M{sub sun}, which form an important transition regime in the hierarchical assembly of mass in {Lambda}CDM cosmology. Our goals are to not only map the mass distributions, but to also test whether the underlying density distribution at this mass scale is dark matter dominated, Navarro-Frenk-White (NFW) like as hypothesized by the standard cosmogony, or isothermal as observed in baryon-rich massive field galaxies. We present details of our lensing + galaxy dynamics formalism built around three representative density profiles, the dark matter dominant NFW and Hernquist distributions, compared with the softened isothermal sphere which matches baryon-rich galaxy scale objects. By testing the effects on the characteristics of these distributions due to variations in their parameters, we show that mass measurements in the core of the group (r/r{sub vir} {approx} 0.2), determined jointly from a lens model and from differential velocity dispersion estimates, may effectively distinguish between these density distributions. We apply our method to multi-object spectroscopy observations of two groups, SL2SJ143000+554648 and SL2SJ143139+553323, drawn from our catalog of galaxy group scale lenses discovered in CFHTLS-Wide imaging. With the lensing and dynamical mass estimates from our observations along with a maximum likelihood estimator built around our model, we estimate the concentration index characterizing each density distribution and the corresponding virial mass of each group. Our likelihood estimation indicates that both groups are dark matter dominant and rejects the isothermal distribution at >>3{sigma} level. For both groups, the estimated i-band M/L ratios of {approx}260 M{sub sun} L{sub sun} {sup -1} are similar to other published values for groups. The Gaussian distribution of the velocities of their member galaxies supports a high degree of virialization. The differences in their virial masses, 2.8 and 1.6 x 10{sup 14} M{sub sun}, and velocity dispersions, 720 and 560 km s{sup -1}, may indicate however that each group is at a different stage of transition to a cluster. We aim to populate this important transition regime with additional results from ongoing observations of the remaining lensing groups in our catalog.

79 ASTRONOMY AND ASTROPHYSICS↗

Maxwell currents beneath thunderstorms

Analyses of single station measurements of the Maxwell current density (Jm) made under Florida thunderstorms during the summer of 1981 have been completed. The results of these analyses indicate that: (1) Jm is usually dominated by the displacement current component when the electric field is close to zero; (2) Jm is steady with time in the intervals between lightning flashes; (3) Jm is not altered significantly by lightning; and (4) the average value of Jm changes slowly and over time scales that are comparable to those required for storm development. Maps have also been derived of the surface Maxwell current density for a number of the Florida TRIP (76-78) storms using field mill data to estimate Jm from the displacement current density. Studies show that these maps provide a good indication of the location and relative intensity of the storm current generators, and area-integrations of the current contours provide estimates of the total storm currents.

Blakeslee, R. J.↗

THE SURFACE MASS DENSITY AND STRUCTURE OF THE OUTER DISK OF NGC 628

We study the kinematics of GALEX-selected H{alpha} knots in the outer disk (beyond R {sub 25}) of NGC 628 (M74), a galaxy representative of large, undisturbed, extended UV (type 1 XUV) disks. Our spectroscopic target sample of 235 of the bluest UV knots surrounding NGC 628 yielded 15 H{alpha} detections (6%), roughly the number expected given the different mean ages of the two populations. The measured vertical velocity dispersion of the H{alpha} knots between 1and1.8 R {sub 25} (13.5-23.2 kpc) is <11 km s{sup -1}. We assume that the H{alpha} knots trace an 'intermediate' vertical mass density distribution (between the isothermal sech{sup 2}(z) and exponential distributions) with a constant scale height across the outer disk (h{sub z} = 700 pc) and estimate a total surface mass density of 7.5 M {sub sun} pc{sup -2}. This surface mass density can be accounted for by the observed gas and stars in the outer disk (little or no dark matter in the disk is required). The vertical velocity dispersion of the outer disk H{alpha} knots nearly matches that measured from older planetary nebulae near the outskirts of the optical disk by Herrmann et al., suggesting a low level of scattering in the outer disk. A dynamically cold stellar component extending nearly twice as far as the traditional optical disk poses interesting constraints on the accretion history of the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Constructing a Network Fundamental Diagram: Synthetic Origin–Destination Approach

The Network Fundamental Diagram (NFD) is significantly used in traffic monitoring and control. One obstacle to a wider application of NFDs in network control is the difficulty of obtaining data from all vehicles traveling in the network to construct an accurate NFD. One solution is to estimate the NFD using data from only a fraction of vehicles (i.e., probe vehicles), where the probe vehicle market penetration rate (MPR) needs to be estimated. A previous study conducted by the authors demonstrated that a distance or time weighted harmonic mean was needed to estimate the flow- and density-based MPRs, respectively using a pairing k-mean clustering approach. This paper introduces another approach that utilizes probe vehicle and observed link volume data to estimate the MPR. A heuristic model is proposed to identify the optimum locations from which to collect link traffic volume data for use in the MPR estimation. The estimated MPR can then be used to construct the NFD. Results show that these models can accurately estimate the NFD with limited probe vehicle and link traffic volume data. Accordingly, the models can be used in the field to estimate the NFD using readily available loop detector and probe vehicle data. The ideal locations for traffic volume data collection can also be proactively chosen to generate optimum estimation results. Since the models proposed here show no significant gains with an increased magnitude of collected data after a certain threshold, they will be helpful, particularly when large-scale data collection is not affordable or realistic.

42 ENGINEERING↗

CONSTRUCTING A NETWORK FUNDAMENTAL DIAGRAM: A SYNTHETIC ORIGIN-DESTINATION APPROACH

The Network Fundamental Diagram (NFD) is increasingly used in traffic monitoring and control. One obstacle to a wider application of NFDs in network control is the difficulty of obtaining data from all vehicles traveling in the network to construct an accurate NFD. One solution is to estimate the NFD using data from only a fraction of vehicles (i.e., probe vehicles), where the probe vehicle market penetration rate (MPR) needs to be estimated. A previous study conducted by the authors demonstrated that a distance or time weighted harmonic mean was needed to estimate the flow- and density-based MPRs, respectively using a pairing k-mean clustering approach. This paper proposes another approach that utilizes probe vehicle and observed link volume data to estimate the MPR. A heuristic model is proposed to identify the optimum locations from which to collect link traffic volume data for use in the MPR estimation. The estimated MPR can then be used to construct the NFD. Results show that these models can accurately estimate the NFD with limited probe vehicle and link traffic volume data. Accordingly, the models can be used in the field to estimate the NFD using readily available loop detector and probe vehicle data. The ideal locations for traffic volume data collection can also be proactively chosen to generate optimum estimation results. Since the models proposed here show no significant gains with an increased magnitude of collected data after a certain threshold, they will be helpful, particularly when large-scale data collection is not affordable or realistic.

Spatial Analysis, Market Penetration Rate, NFD, Sy↗

Robust statistical reconstruction for charged particle tomography

Systems and methods for charged particle detection including statistical reconstruction of object volume scattering density profiles from charged particle tomographic data to determine the probability distribution of charged particle scattering using a statistical multiple scattering model and determine a substantially maximum likelihood estimate of object volume scattering density using expectation maximization (ML/EM) algorithm to reconstruct the object volume scattering density. The presence of and/or type of object occupying the volume of interest can be identified from the reconstructed volume scattering density profile. The charged particle tomographic data can be cosmic ray muon tomographic data from a muon tracker for scanning packages, containers, vehicles or cargo. The method can be implemented using a computer program which is executable on a computer.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DLTS analysis of amphoteric interface defects in high-TiO{sub 2} MOS structures prepared by sol-gel spin-coating

High-κ TiO{sub 2} thin films have been fabricated from a facile, combined sol – gel spin – coating technique on p and n type silicon substrate. XRD and Raman studies headed the existence of anatase phase of TiO{sub 2} with a small grain size of 18 nm. The refractive index ‘n’ quantified from ellipsometry is 2.41. AFM studies suggest a high quality, pore free films with a fairly small surface roughness of 6 Å. The presence of Ti in its tetravalent state is confirmed by XPS analysis. The defect parameters observed at the interface of Si/TiO{sub 2} were studied by capacitance – voltage (C – V) and deep level transient spectroscopy (DLTS). The flat – band voltage (V{sub FB}) and the density of slow interface states estimated are – 0.9, – 0.44 V and 5.24×10{sup 10}, 1.03×10{sup 11} cm{sup −2}; for the NMOS and PMOS capacitors, respectively. The activation energies, interface state densities and capture cross – sections measured by DLTS are E{sub V} + 0.30, E{sub C} – 0.21 eV; 8.73×10{sup 11}, 6.41×10{sup 11} eV{sup −1} cm{sup −2} and 5.8×10{sup −23}, 8.11×10{sup −23} cm{sup 2} for the NMOS and PMOS structures, respectively. A low value of interface state density in both P- and N-MOS structures makes it a suitable alternate dielectric layer for CMOS applications. And also very low value of capture cross section for both the carriers due to the amphoteric nature of defect indicates that the traps are not aggressive recombination centers and possibly can not contribute to the device operation to a large extent.

36 MATERIALS SCIENCE↗

The Detection of Deuterated Water in the Large Magellanic Cloud with ALMA

We report the first detection of deuterated water (HDO) toward an extragalactic hot core. The HDO 211–212 line has been detected toward hot cores N 105–2 A and 2 B in the N 105 star-forming region in the low-metallicity Large Magellanic Cloud (LMC) dwarf galaxy with the Atacama Large Millimeter/submillimeter Array (ALMA). We have compared the HDO line luminosity (LHDO) measured toward the LMC hot cores to those observed toward a sample of 17 Galactic hot cores covering three orders of magnitude in LHDO, four orders of magnitude in bolometric luminosity (Lbol), and a wide range of Galactocentric distances (thus metallicities). The observed values of LHDO for the LMC hot cores fit very well into the LHDO trends with Lbol and metallicity observed toward the Galactic hot cores. We have found that LHDO seems to be largely dependent on the source luminosity, but metallicity also plays a role. We provide a rough estimate of the H2O column density and abundance ranges toward the LMC hot cores by assuming that HDO/H2O toward the LMC hot cores is the same as that observed in the Milky Way; the estimated ranges are systematically lower than Galactic values. The spatial distribution and velocity structure of the HDO emission in N 105–2 A is consistent with HDO being the product of the low temperature dust grain chemistry. Our results are in agreement with the astrochemical model predictions that HDO is abundant regardless of the extragalactic environment and should be detectable with ALMA in external galaxies.

Marta Sewilo↗

Are galactic star formation and quenching governed by local, global, or environmental phenomena?

ABSTRACT We present an analysis of star formation and quenching in the SDSS-IV MaNGA-DR15, utilizing over 5 million spaxels from ∼3500 local galaxies. We estimate star formation rate surface densities (ΣSFR) via dust corrected H α flux where possible, and via an empirical relationship between specific star formation rate (sSFR) and the strength of the 4000 Å break (D4000) in all other cases. We train a multilayered artificial neural network (ANN) and a random forest (RF) to classify spaxels into ‘star-forming’ and ‘quenched’ categories given various individual (and groups of) parameters. We find that global parameters (pertaining to the galaxy as a whole) perform collectively the best at predicting when spaxels will be quenched, and are substantially superior to local/spatially resolved and environmental parameters. Central velocity dispersion is the best single parameter for predicting quenching in central galaxies. We interpret this observational fact as a probable consequence of the total integrated energy from active galactic neucleus (AGN) feedback being traced by the mass of the black hole, which is well known to correlate strongly with central velocity dispersion. Additionally, we train both an ANN and RF to estimate ΣSFR values directly via regression in star-forming regions. Local/spatially resolved parameters are collectively the most predictive at estimating ΣSFR in these analyses, with stellar mass surface density at the spaxel location (Σ*) being by far the best single parameter. Thus, quenching is fundamentally a global process but star formation is governed locally by processes within each spaxel.

Bluck, Asa F. L.↗

THE PSEUDO-EVOLUTION OF HALO MASS

A dark matter halo is commonly defined as a spherical overdensity of matter with respect to a reference density, such as the critical density or the mean matter density of the universe. Such definitions can lead to a spurious pseudo-evolution of halo mass simply due to redshift evolution of the reference density, even if its physical density profile remains constant over time. We estimate the amount of such pseudo-evolution of mass between z = 1 and 0 for halos identified in a large N-body simulation, and show that it accounts for almost the entire mass evolution of the majority of halos with M{sub 200{rho}-bar} Less-Than-Or-Equivalent-To 10{sup 12} h{sup -1} M{sub Sun} and can be a significant fraction of the apparent mass growth even for cluster-sized halos. We estimate the magnitude of the pseudo-evolution assuming that halo density profiles remain static in physical coordinates, and show that this simple model predicts the pseudo-evolution of halos identified in numerical simulations to good accuracy, albeit with significant scatter. We discuss the impact of pseudo-evolution on the evolution of the halo mass function and show that the non-evolution of the low-mass end of the halo mass function is the result of a fortuitous cancellation between pseudo-evolution and the absorption of small halos into larger hosts. We also show that the evolution of the low-mass end of the concentration-mass relation observed in simulations is almost entirely due to the pseudo-evolution of mass. Finally, we discuss the implications of our results for the interpretation of the evolution of various scaling relations between the observable properties of galaxies and galaxy clusters and their halo masses.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimation of Forest Fuel Load from Radar Remote Sensing

Understanding fire behavior characteristics and planning for fire management require maps showing the distribution of wildfire fuel loads at medium to fine spatial resolution across large landscapes. Radar sensors from airborne or spaceborne platforms have the potential of providing quantitative information about the forest structure and biomass components that can be readily translated to meaningful fuel load estimates for fire management. In this paper, we used multifrequency polarimetric synthetic aperture radar imagery acquired over a large area of the Yellowstone National Park (YNP) by the AIRSAR sensor, to estimate the distribution of forest biomass and canopy fuel loads. Semi-empirical algorithms were developed to estimate crown and stem biomass and three major fuel load parameters, canopy fuel weight, canopy bulk density, and foliage moisture content. These estimates when compared directly to measurements made at plot and stand levels, provided more than 70% accuracy, and when partitioned into fuel load classes, provided more than 85% accuracy. Specifically, the radar generated fuel parameters were in good agreement with the field-based fuel measurements, resulting in coefficients of determination of R(sup 2) = 85 for the canopy fuel weight, R(sup 2)=.84 for canopy bulk density and R(sup 2) = 0.78 for the foliage biomass.

Saatchi, Sassan↗

Bulk viscosity from Urca processes: n p e μ matter in the neutrino-transparent regime

We study the bulk viscosity of moderately hot and dense, neutrino-transparent relativistic npeμ matter arising from weak-interaction direct Urca processes. This work parallels our recent study of the bulk viscosity of npeμ matter with a trapped neutrino component. The nuclear matter is modeled in a relativistic density functional approach with two different parametrizations—DDME2 (which does not allow for the low-temperature direct-Urca process at any density) and NL3 (which allows for low-temperature direct-Urca process above a low-density threshold). Here, we compute the equilibration rates of Urca processes of neutron decay and lepton capture, as well as the rate of the muon decay, and find that the muon decay process is subdominant to the Urca processes at temperatures T ≥ 3 MeV in the case of DDME2 model and T ≥ 1 MeV in the case of NL3 model. Thus, the Urca-process-driven bulk viscosity is computed with the assumption that pure leptonic reactions are frozen. As a result the electronic and muonic Urca channels contribute to the bulk viscosity independently and at certain densities the bulk viscosity of npeμ matter shows a double-peak structure as a function of temperature instead of the standard one-peak (resonant) form. In the final step, we estimate the damping timescales of density oscillations by the bulk viscosity. We find that, e.g., at a typical oscillation frequency f = 1~kHz, the damping of oscillation is most efficient at temperatures 3 ≤ T ≤ 5~MeV and densities n B ≤ 2n 0 where they can affect the evolution of the post-merger object.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Point Cloud Based Mapping of Understory Shrub Fuel Distribution, Estimation of Fuel Consumption and Relationship to Pyrolysis Gas Emissions on Experimental Prescribed Burns

Forest fires spread via production and combustion of pyrolysis gases in the understory. The goal of the present paper is to understand the spatial location, distribution, and fraction (relative to the overstory) of understory plants, in this case, sparkleberry shrub, namely its degree of understory consumption upon burn, and to search for correlations between the degree of shrub consumption to the composition of emitted pyrolysis gases. Data were collected in situ at seven small experimental prescribed burns at Ft. Jackson, an army base in South Carolina, USA. Using airborne laser scanning (ALS) to map overstory tree crowns and terrestrial laser scanning (TLS) to characterize understory shrub fuel density, both pre- and postburn estimates of sparkleberry coverage were obtained. Sparkleberry clump polygons were manually digitized from a UAV-derived orthoimage of the understory and intersected with the TLS point cloud-derived rasters of pre- and postburn shrub fuel bulk density; these were compared in relation to overstory crown cover as well as to ground truth. Shrub fuel consumption was estimated from the digitized images; sparkleberry clump distributions were generally found to not correlate well to the overstory tree crowns, suggesting it is shade-tolerant. Moreover, no relationship was found between the magnitude of the fuel consumption and the chemical composition of pyrolysis gases, even though mixing ratios of 25 individual gases were measured.

54 ENVIRONMENTAL SCIENCES↗

Ionization in inductively coupled argon plasmas studied by optical emission spectroscopy

Contribution of stepwise ionization to total ionization was experimentally investigated in low-pressure inductively coupled argon plasmas. In the pressure range 3-50 mTorr, optical emission spectroscopy was employed to determine metastable fractions (metastable density relative to ground state density) by measuring the emission intensity of selected lines. The measured metastable fractions were in good agreement with the calculation, showing a dependence on the discharge pressure. The rate of stepwise ionization was estimated from the excited level densities (measurements and model predictions) and their ionization rate coefficients. It is observed that at relatively low discharge pressures (<10 mTorr) the ionization is mainly provided by the direct ionization, whereas at higher pressure the stepwise ionization is predominant with increasing absorbed power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ABIOTIC FORMATION OF CARBOXYLIC ACIDS (RCOOH) IN INTERSTELLAR AND SOLAR SYSTEM MODEL ICES

The present laboratory study simulated the abiotic formation of carboxylic acids (RCOOH) in interstellar and solar system model ices of carbon dioxide (CO{sub 2})-hydrocarbon mix C{sub n} H{sub 2n+2} (n = 1-6). The pristine model ices were irradiated at 10 K under contamination-free, ultrahigh vacuum conditions with energetic electrons generated in the track of galactic cosmic-ray particles. The chemical processing of the ices was monitored by a Fourier transform infrared spectrometer and a quadrupole mass spectrometer during the irradiation phase and subsequent warm-up phases on line and in situ in order to extract qualitative (carriers) and quantitative (rate constants and yields) information on the newly synthesized species. Carboxylic acids were identified to be the main carrier, together with carbon monoxide (CO) and a trace of formyl (HCO) and hydroxycarbonyl (HOCO) radicals at 10 K. The upper limit of acid column density at 10 K was estimated as much as (1.2 {+-} 0.1) x 10{sup 17} molecules cm{sup -2} at doses of 17 {+-} 2 eV molecule{sup -1}, or the yield of 39% {+-} 4% from the initial column density of carbon dioxide. The temporal column density profiles of the products were then numerically fit using two independent kinetic schemes of reaction mechanisms. Finally, we transfer this laboratory simulation to star-forming regions of the interstellar medium, wherein cosmic-ray-induced processing of icy grains at temperatures as low as 10 K could contribute to the current level of chemical complexity as evidenced in astronomical observations and in extracts of carbonaceous meteorites.

79 ASTRONOMY AND ASTROPHYSICS↗