Search NASA⌕ Search

SEARCH · Search NASA

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

An Experimental and Predictive Study of Bent-Chamber Acoustic Liners

Acoustic liner samples with rectangular, sharp chamber bends are 3D-printed and tested in the NASA Normal Incidence Tube. The angle of the bend is varied from 0 to 180 degrees. Four different methods are used to predict the impedance behavior of these samples: (1) midline-length assumption, (2) Cummings correction for curved duct bends, (3) Cummings prediction for 180 degrees sharp duct bends, and (4) Helmholtz equation via finite element method. Trends in the experimental data are discussed, predictions are compared to the experimental data, and recommendations are made on prediction method usage. Follow-on work is suggested, including capturing additional test points at higher frequencies and with different chamber geometries. Future modeling strategies are also briefly described.

chamber↗

Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Supersonic Turbine Bladed Disks

Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. Assessing the blade structural integrity is a complex task requiring an initial characterization of whether resonance is possible and then performing a forced response analysis if that condition is met. The standard technique for forced response analysis in rocket engine turbines is to decompose a computational fluid dynamics (CFD).generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies using cyclically symmetric structural dynamic models. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non ]harmonic excitation sources that become present in complex flows. This complex content can only be captured by a CFD flow field encompassing at least an entire revolution. A substantial development effort to create a series of software programs to enable application of the 360 degree forcing function in a frequency response analysis on cyclic symmetric models has been completed (to be described in a future paper), but the question still remains whether the frequency response analysis itself is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, of bladed-disks undergoing this complex flow environment have been performed. The first is of a bladed disk with each blade modeled by simple beam elements and the disk modeled with plates (using the finite element code MSC/NASTRAN). The focus of this model is to be representative of response of realistic bladed disks, and so the dimensions are roughly equivalent to the new J2X rocket engine 1st stage fuel pump turbine. The simplicity of the model allows the CFD load to be able to be readily applied, along with analytical and experimental variations in both the temporal and spatial fourier components of the excitation. In addition, this model is a first step in identifying response differences between transient and frequency forced response analysis techniques. The second phase assesses this difference for a much more realistic solid model of a bladed-disk in order to evaluate the effect of the spatial variation in loading on blade dominated modes. Neither research on the accuracy of the frequency response method when used in this context or a comprehensive study of the effect of test-observed variation on blade forced response have been found in the literature, so this research is a new contribution to practical structural dynamic analysis of gas turbines. The primary excitation of the upstream nozzles interacts with the blades on fuel pump of the J2X causes the 5th Nodal diameter modes to be excited, as explained by Tyler and Sofrin1, so a modal analysis was first performed on the beam/plate model and the 5ND bladed-disk mode at 40167 hz was identified and chosen to be the one excited at resonance (see figure 1). The first forced response analysis with this model focuses on identifying differences between frequency and transient response analyses. A hypothesis going into the analysis was that perhaps the frequency response was enforcing a temporal periodicity that did not really exist, and so therefore it would overestimate the response. As high dynamic response was a considerable source of stress in the J2X, examining this concept could potentially be beneficial for the program.

Brown, Andrew M.↗

Frequencies of solar p-mode oscillations

A list is presented of frequencies that can be used as a basis for helioseismic investigations of the average structure of the solar interior as a function of depth. The list includes measurements of frequencies of p-mode multiplets covering the l range from 4 to 99. Two different data sets are employed: one based on Doppler shift measurements made in 1985 at the Big Bear Solar Observatory and another based on intensity measurements made in 1981 at the geographic South Pole. Frequencies from the two data sets are compared, and systematic frequency differences are found that range from less than 0.1 microHz at low values of l to about 0.6 microHz at l = 99; the uncertainty is + or - 0.1 microHz.

Duvall, T. L., Jr.↗

FREQUENCY DISTRIBUTIONS OF 90SR AND 137CS CONCENTRATIONS IN AN ECOSYSTEM OF THE 'RED FOREST' AREA IN THE CHERNOBYL EXCLUSION ZONE

In the most highly contaminated region of the Chernobyl Exclusion Zone: the 'Red Forest' site, the accumulation of the major dose-affecting radionuclides ({sup 90}Sr and {sup 137}Cs) within the components of an ecological system encompassing 3,000 m{sup 2} were characterized. The sampled components included soils (top 0-10 cm depth), Molina caerulea (blue moor grass), Camponotus vagus (carpenter ants) and Pelobates fuscus (spade-footed toad). In a comparison among the components of this ecosystem, the {sup 90}Sr and {sup 137}Cs concentrations measured in 40 separate grids exhibited significant differences, while the frequency distribution of the values were close to a logarithmically normal leptokurtic distribution with a significant right-side skew. While it is important to identify localized areas of high contamination or 'hot spots,' including these values in the arithmetic mean may overestimate the exposure risk. In component sample sets that exhibited logarithmically normal distribution, the geometrical mean more accurately characterizes a site. Ideally, risk assessment is most confidently achieved when the arithmetic and geometrical means are most similar, meaning the distribution approaches normal. Through bioaccumulation, the highest concentrations of {sup 90}Sr and {sup 137}Cs were measured in the blue moor grass and spade-footed toad. These components also possessed distribution parameters that shifted toward a normal distribution.

54 ENVIRONMENTAL SCIENCES↗

On the nonlinear dissipative dynamics of weakly overdamped oscillators

We consider the motion of weakly overdamped linear oscillators. Weak overdamping of an oscillator is defined as a slight excess of the damping decrement over its natural frequency. Exact solutions are obtained for a certain relation between the decrement and the natural frequency and qualitatively different regimes of motion are analyzed. The threshold conditions corresponding to changes of regimes are established; one-component models with an arbitrary degree of nonlinearity are analyzed, and quadratic and cubic nonlinearities are considered in detail. If the nonlinearity in a multicomponent model is determined by a homogeneous function, transformations of the Kummer-Liouville type can be reduced to an autonomous system of second-order differential equations in the case when the relation between the decrement and the natural frequency has been established. Some integrable multicomponent models with quadratic and cubic nonlinearities are analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification and positional distribution analysis of transcription factor binding sites for genes from the wheat fl-cDNA sequences

Abstract The binding sites of transcription factors (TFs) in upstream DNA regions are called transcription factor binding sites (TFBSs). TFBSs are important elements for regulating gene expression. To date, there have been few studies on the profiles of TFBSs in plants. In total, 4,873 sequences with 5ʹ upstream regions from 8530 wheat fl-cDNA sequences were used to predict TFBSs. We found 4572 TFBSs for the MADS TF family, which was twice as many as for bHLH (1951), B3 (1951), HB superfamily (1914), ERF (1820), and AP2/ERF (1725) TFs, and was approximately four times higher than the remaining TFBS types. The percentage of TFBSs and TF members showed a distinct distribution in different tissues. Overall, the distribution of TFBSs in the upstream regions of wheat fl-cDNA sequences had significant difference. Meanwhile, high frequencies of some types of TFBSs were found in specific regions in the upstream sequences. Both TFs and fl-cDNA with TFBSs predicted in the same tissues exhibited specific distribution preferences for regulating gene expression. The tissue-specific analysis of TFs and fl-cDNA with TFBSs provides useful information for functional research, and can be used to identify relationships between tissue-specific TFs and fl-cDNA with TFBSs. Moreover, the positional distribution of TFBSs indicates that some types of wheat TFBS have different positional distribution preferences in the upstream regions of genes.

Chen, Zhen-Yong↗

General Space Vector Modulation of A High-Frequency AC Linked Universal Converter for Distributed Generations

A high-frequency (HF) ac linked universal converter is proposed for distributed generations interfacing three-phase ac with single-phase ac or dc. The primary and secondary of the HF isolation transformer are, respectively, formed by a three-to-single-phase matrix converter and a cyclo converter. Based on the operating principle, a general and simple to be implemented space vector modulation (SVM) is developed from that for the conventional indirect matrix converter and constantly operated virtual dual-active-bridge converter. Simulation studies carried out on different amplitudes and frequencies of single-phase ac output and dc output demonstrate effectiveness and simplicity of the proposed converter with the SVM solution.

Liu, Yushan↗

A New Principle of Sound Frequency Analysis

In connection with the study of aircraft and propeller noises, the National Advisory Committee for Aeronautics has developed an instrument for sound-frequency analysis which differs fundamentally from previous types, and which, owing to its simplicity of principle, construction, and operation, has proved to be of value in this investigation. The method is based on the well-known fact that the Ohmic loss in an electrical resistance is equal to the sum of the losses of the harmonic components of a complex wave, except for the case in which any two components approach or attain vectorial identity, in which case the Ohmic loss is increased by a definite amount. The principle of frequency analysis has been presented mathematically and a number of distinct advantages relative to previous methods have been pointed out. An automatic recording instrument embodying this principle is described in detail. It employs a beat-frequency oscillator as a source of variable frequency. A large number of experiments have verified the predicted superiority of the method. A number of representative records are presented.

Theodorsen, Theodore↗

Effect of ultrasonic irradiation on mammalian cells and chromosomes in vitro

Human peripheral blood and HeLa cells were irradiated in vitro at the ultrasonic frequency of 65 kHz. The whole blood and HeLa cell suspensions were exposed to continuous and pulsed ultrasonic power levels of 0.12, 0.16, 0.72, 1.12 and 2.24 W for a period of one minute. The method of ultrasonic irradiation was carried out with the whole blood or HeLa cell suspensions coupled directly to a cylindrical transducer while heating of the cell suspensions in excess of 41 C was avoided. Irradiated and unirradiated peripheral blood lymphocyte chromosome cultures were prepared and scored for selected numerical and morphological aberrations. There was no significant difference in the frequency of chromosomal aberrations between irradiated and unirradiated cells.

Roseboro, J. A.↗

Precise ROCOF estimation algorithm for low inertia power grids

The precise estimation of Rate Of Change Of Frequencies (ROCOFs) in a generation trip event can be helpful on power system inertia estimation, fast system response, and accurate event capturing. However, the ROCOF estimations from the existing Synchronized Measurement Devices (SMDs) are usually simply calculated by the finite difference between two adjacent frequency measurement points. The ineluctable noises, disturbances, and spikes from real-world frequency measurements can bring large dynamics to the ROCOF estimation and thus can result in an inaccurate estimation of the initial ROCOF. This issue becomes more serious when the target power grid has low inertia, and a large amount of distributed energy sources are deployed. To address this issue, a precise ROCOF estimation algorithm is designed based on least square method with flexible window size. In addition, a median filter is also designed and applied on the frequency measurements before using the proposed algorithm. The window size and thresholds in the proposed algorithm are determined with historical event data analysis. The proposed algorithm is deployed in a low cost, flexible, and distribution level universal grid analyzer (UGA) platform. In conclusion, multiple experiments are conducted in both a laboratory and the Hawaiian Islands to verify the effectiveness of the proposed algorithm.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Extraordinary acoustic transmission mediated by Helmholtz resonators

We demonstrate perfect transmission of sound through a rigid barrier embedded with Helmholtz resonators. The resonators are confined within a waveguide and they are oriented such that one neck protrudes onto each side of the barrier. Perfect sound transmission occurs even though the open area of the necks is less than 3% of the barrier area. Maximum transmission occurs at the resonant frequency of the Helmholtz resonator. Because the dimensions of the Helmholtz resonators are much smaller than the resonant wavelength, the transmission is independent of the direction of sound on the barrier and of the relative placement of the necks. Further, we show that the transmitted sound experiences a continuous phase transition of π radians as a function of frequency through resonance. In simulations of adjacent resonators with slightly offset resonance frequencies, the phase difference leads to destructive interference. By expanding the simulation to a linear array of tuned Helmholtz resonators we show that it is possible to create an acoustic lens. The ability of Helmholtz resonator arrays to manipulate the phase of a plane acoustic wave enables a new class of sonic beam-forming devices analogous to diffractive optics.

36 MATERIALS SCIENCE↗

Regional variability in the environmental controls of precipitation regimes in the tropics

The environmental factors that control precipitation regimes in Boreal winter rainfall in the tropics and their regional variabilities are examined using a simple statistical analysis and a machine learning model. Radar-derived precipitation from field campaigns at Darwin Australia, Manaus Brazil, and the Equatorial Indian Ocean, along with the corresponding large-scale environmental variables from ERA5 reanalysis, are used. The dependence of marginal distributions of frequencies of these regimes on five environmental variables are calculated. The variables are hourly column integrated precipitable water (PW), convective available potential energy (CAPE), convective inhibition (CIN), and lower and upper tropospheric wind shear. The simple machine learning model that predicts the probability of transition from suppressed to an active regime as a function of the environmental variables is designed and optimized for a potential application as a trigger function for convection parameterizations. To the first order the analysis shows an abrupt increase in the probability of an active regime near PW > 60 mm and CIN of <100 J kg -1 . The key differences in the frequencies of active regimes among the regions are found to be related to the fact that over Darwin there is strong variability in PW while CIN is generally low. Over Amazon, on the other hand, both PW and CIN are quite variable. Over the DYNAMO domain the comparatively frequent low PW is compensated for by consistently low CIN resulting in a moderate frequency of an active regime.

54 ENVIRONMENTAL SCIENCES↗

Modelling grain-scattered ultrasound in austenitic stainless-steel welds: A hybrid model

The ultrasonic inspection of austenitic stainless steel welds can be challenging due to their coarse grain structure, charaterised by preferentially oriented, elongated grains. The anisotropy of the weld is manifested as both a ‘steering’ of the beam and the back-scatter of energy due to the macroscopic granular structure of the weld. However, the influence of weld properties, such as mean grain size and orientation distribution, on the magnitude of scattered ultrasound is not well understood. A hybrid model has been developed to allow the study of grain-scatter effects in austenitic welds. An efficient 2D Finite Element (FE) method is used to calculate the complete scattering response from a single elliptical austenitic grain of arbitrary length and width as a function of the specific inspection frequency. A grain allocation model of the weld is presented to approximate the characteristic structures observed in austenitic welds and the complete scattering behaviour of each grain calculated. This model is incorporated into a semi-analytical framework for a single-element inspection of a typical weld in immersion. Experimental validation evidence is demonstrated indicating excellent qualitative agreement of SNR as a function of frequency and a minimum SNR difference of 2 dB at a centre frequency of 2.25 MHz. Additionally, an example Monte-Carlo study is presented detailing the variation of SNR as a function of the anisotropy distribution of the weld, and the application of confidence analysis to inform inspection development.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Entanglement created by spontaneously generated coherence

We propose a scheme that is able to generate on demand a steady-state entanglement between two nondegenerate cavity modes. The scheme relies on the interaction of the cavity modes with driven two- or three-level atoms, which act as a coupler to build entanglement between the modes. We show that, in the limit of a strong driving, it is crucial for the generation of entanglement between the modes to imbalance populations of the dressed states of the driven atomic transition. In the case of a three-level V-type atom, we find that a stationary entanglement can be created on demand by tuning the Rabi frequency of the driving field to the difference between the atomic transition frequencies. The resulting degeneracy of the energy levels, together with the spontaneously generated coherence, generate a steady-state entanglement between the cavity modes. It is shown that the condition for the maximal entanglement coincides with the collapse of the atomic system into a pure trapping state. We also show that the creation of entanglement depends strongly on the mutual polarization of the transition atomic dipole moments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selection of Working Frequencies in Complex Plane Motion of Saws within a Woodcutting System

Abstract—A woodcutting system based on complex plane motion (translation + rotation) of the saw blades is promising in principle but proves unstable in practice. This may be addressed by selecting working frequencies of the saws that differ from the eigenfrequencies and other parametric frequencies of the system. To that end, those frequencies must be identified. In the present work, a mathematical model of the saw system is derived. Its mass and size are optimized. On that basis, an energy-saving sawing machine superior in performance to comparable machines is manufactured and tested.

42 ENGINEERING↗

The induced magnetic field of the moon - Conductivity profiles and inferred temperature.

Electromagnetic induction in the moon driven by fluctuations of the interplanetary magnetic field is used to determine the lunar bulk electrical conductivity. The earlier data are now augmented by an order of magnitude. The present data clearly show the north-south and east-west transfer function difference as well as the high-frequency rollover suggested earlier. The difference is shown to be compatible over the midfrequency range (0.001 to 0.01 Hz) with a noise source associated with the compression of the local remanent field by solar wind dynamic pressure fluctuations. The rollover of the transfer functions is shown to result from higher order magnetic multipole radiation; electric multipoles appear supressed, although a vestigial TM interaction may still be present. Models for two, three, and four layer; current layer, double current layer, and core plus current layer moons are generated by inversion of the data, using a theory that incorporates higher-order multipoles.

Sonett, C. P.↗

Measurement of Kinetic Parameters by Oscillated Experiments

The availability of reliable values of the kinetic parameters (effective delayed neutron fraction {beta} and effective mean neutron generation time {Lambda}) is important for reactor kinetic analyses and for reactivity monitoring when adopting the point kinetic approach. The kinetic parameters may be obtained either by simulations (Monte Carlo or deterministic) of the system or by direct measurements. Several methods have been proposed for the direct experimental determination of the kinetic parameters, e.g. control rod drops and noise analysis approaches, e.g. In this work, the problem of the determination of kinetic parameters in subcritical systems is tackled. The system is subjected to an oscillated source and the value of the ratio {beta}/{Lambda} is related to a measurable quantity when the system response reaches an equilibrium condition. In the analysis presented, a pure frequency is considered: when analyzing more complicated source periodic behaviours, a Fourier analysis can allow to isolate the contributions of individual frequencies. The phase difference between the oscillating source and the system response is adopted as the experimental observable. The method for the interpretation of the measurements is based on the standard point kinetic model. The response of the system is obtained by localized neutron detectors and, therefore, spatial and spectral effects may also affect the results. This drawback needs some further discussion and will be considered in the future work. The phase shift between the source signal and the system response may be analytically retrieved by Laplace transforming the point kinetic equations in the presence of an oscillated source. An explicit formula relates the phase shift to the ratio {beta}/{Lambda} and to the frequency of the source. Based on this relationship, the ratio {beta}/{Lambda} can be determined. To validate the technique, the experimental data are simulated by a numerical code solving the time-dependent diffusion equations for a source-driven system. The work allows to assess the possibility of the technique and its limits of applicability. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Interaction between magnetic vortex cores in a pair of nonidentical nanodisks

The coupling of two nonidentical magnetic nanodisks, i.e., with different vortex gyrotropic frequencies, is studied. From the analytical approach, the interactions between the nanodisks along x and y directions (the coupling integrals) were obtained as a function of distance. From the numerical solution of Thiele's equation, we derived the eigenfrequencies of the vortex cores as a function of distance. The motion of the two vortex cores and, consequently, the time dependence of the total magnetization M(t) were derived both using Thiele's equation and by micromagnetic simulation. From M(t), a recently developed method, the magnetic vortex echoes, analogous to the Nuclear Magnetic Resonance spin echoes, was used to compute the distance dependence of the magnetic coupling strength. The results of the two approaches differ by approximately 10%; using one single term, a dependence with distance found is broadly in agreement with studies employing other techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗