Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Amorphous TiCu-Based Additives for Improving Hydrogen Storage Properties of Magnesium Hydride

Magnesium hydride has long been regarded as a promising candidate material for hydrogen and heat storage due to its high hydrogen capacity, reversibility, and low cost. Catalytic doping has been demonstrated as one of the most effective methods to improve hydrogen storage properties of MgH 2 . In this study, amorphous Ti 45 Cu 41 Ni 9 Zr 5 and Ti 40 Cu 47 Zr 10 Sn 3 alloys are used as additives for MgH 2 . Nanostructured MgH 2 doped with amorphous or crystalline TiCu-based alloys are prepared by using a high-energy mechanochemical synthesis method. Results show that the amorphous TiCu additives provide enhanced catalytic effects compared to crystalline alloys of the same composition. Doping MgH 2 using an amorphous Ti 45 Cu 41 Ni 9 Zr 5 alloy yielded improved dehydrogenation kinetics compared to using crystalline Ti 40 Cu 47 Zr 10 Sn 3 alloy. The analysis using transmission electron microscopy reveals that there are nanostructured catalytic particles uniformly distributed in the amorphous TiCu-catalyzed MgH 2 . The MgH 2 system catalyzed by amorphous TiCu-based alloy shows little degradation during hydrogenation and dehydrogenation cycling at 300 °C. The amorphous TiCu-based catalysts are thermally stable at temperatures up to 360 °C. Heating the amorphous Ti 45 Cu 41 Ni 9 Zr 5 -catalyzed MgH 2 to temperatures above 360 °C led to disproportionation of the catalyst alloy and the formation of MgCu 2 and Ti 2 Cu. In addition, PCI analysis of the amorphous Ti 45 Cu 41 Ni 9 Zr 5 -catalyzed MgH 2 shows a slight increase in hydrogen equilibrium pressure, resulting in a reaction enthalpy of -78.7 kJ/mol • H 2 and an entropy of 145.0 J/K•mol•H 2 . As a result, the entropy calculated from this study is approximately 10 J/K•mol•H 2 higher than values previously reported for undoped and catalyzed Mg-H systems.

08 HYDROGEN↗

Accelerated corrosion of stainless steel in thiocyanate-containing solutions

It is known that reduced sulfur compounds (such as thiocyanate and thiosulfate) can accelerate active corrosion of austenitic stainless steel in acid solutions, but before we started this project the mechanism of acceleration was largely unclear. This work combined electrochemical measurements and analysis using scanning electron microscopy (SEM) and X-ray photo-electron spectroscopy (XPS), which provided a comprehensive understanding of the catalytic effect of reduced sulfur species on the active corrosion of stainless steel. Both the behavior of the pure elements and the steel were studied and the work focused on the interaction between the pure elements of the steel, which is the least understood area. Upon completion of this work, several aspects are now much clearer. The main results from this work can be summarized as follows: The presence of low concentrations (around 0.1 mM) of thiocyanate or tetrathionate in dilute sulfuric acid greatly accelerates the anodic dissolution of chromium and nickel, but has an even stronger effect on stainless steels (iron-chromium-nickel alloys). Electrochemical measurements and surface analyses are in agreement with the suggestion that accelerated dissolution really results from suppressed passivation. Even well below the passivation potential, the electrochemical signature of passivation is evident in the electrode impedance; the electrode impedance shows clearly that this pre-passivation is suppressed in the presence of thiocyanate. For the stainless steels, remarkable changes in the morphology of the corroded metal surface and in the surface concentration of chromium support the suggestion that pre-passivation of stainless steels is suppressed because dissolution of chromium is accelerated. Surface analysis confirmed that adsorbed sulfur / sulfide forms on the metal surfaces upon exposure to solutions containing thiocyanate or thiosulfate. For pure nickel, and steels containing nickel (and residual copper), bulk sulfide (visible as a black corrosion product) forms during anodic dissolution. The sulfide is electronically conductive, and gives an increase of several orders of magnitude in the electrode capacitance; the sulfide also causes anodic activation to persist after the pure metals and steels were removed from the thiocyanate-containing electrolyte and transferred to a thiocyanate-free electrolyte. The main practical implications of this work are that low concentrations of reduced sulfur compounds strongly affect anodic dissolution of stainless steels, and that selecting steels with elevated concentrations of chromium, nickel or molybdenum would serve to limit the anodic dissolution rate in the presence of reduced sulfur compounds.

36 MATERIALS SCIENCE↗

Preparation and drug release behavior of temperature-responsive mesoporous carbons

A temperature-responsive composite based on poly (N-isopropylacrylamide) (PNIPAAm) and ordered mesoporous carbons (OMCs) has been successfully prepared by a simple wetness impregnation technique. The structures and properties of the composite were characterized by infrared spectroscopy (IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), N{sub 2} sorption, thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). The results showed that the inclusion of PNIPAAm had not greatly changed the basic ordered pore structure of the OMCs. Ibuprofen (IBU) was selected as model drug, and in vitro test of IBU release exhibited a temperature-responsive controlled release delivery. - Graphical abstract: The bands located at 1650 and 1549 cm{sup -1} could be assigned to C=O stretching and N-H bending vibrations for polymer PNIPAAm (a). The bands at 1388 and 1369 cm{sup -1} were due to isopropyl group, and the band at 1459 cm{sup -1} was related to the bending vibration of C-H (a). For the PNIPAAm/OMCs composite, the characteristic bands of polymer were still observed besides those for carbon materials and the bands at around 1585 cm{sup -1} and a broad band at about 1100 cm{sup -1} were characteristics for the carbon materials(c). In addition, little shifts of C=O and N-H bands compared to the pure PNIPAAm were also observed (b), indicating a weak interaction between the polymer and carbon material. These results could be a proof that the PNIPAAm has been incorporated into the carbon material. Highlights: > A temperature-responsive PNIPAAm/OMCs composite was successfully synthesized by a simple wetness impregnation technique for the first time. > The inclusion of PNIPAAm had not greatly changed the basic ordered pore structure of the OMCs. > In vitro test of IBU release exhibited a temperature-responsive controlled release delivery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The electronic properties and lattice dynamics of (Na{sub 0.5}Bi{sub 0.5})TiO{sub 3}: From cubic to tetragonal and rhombohedral phases

The structural, electronic and dynamical properties of the cubic, tetragonal and rhombohedral phases of a lead-free ferroelectrics, (Na{sub 0.5}Bi{sub 0.5})TiO{sub 3} (NBT), have been studied with a density functional formalism. The direct band gap is determined to be 2∼3 eV for three phases, suggesting them to be good optical material. The equilibrium structures were given, and the importance of Bi atom in the low-symmetry ferroelectric phases were investigated with the electron localization functions analysis. The vibration modes at the Γ point were calculated to provide a basis for analyzing the Raman and IR spectra. Soft modes were found in both the cubic and the tetragonal phases, providing a clue in understanding the ferroelectric phase transition in NBT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Er3+-Yb3+/Er3+-Yb3+-Li+/Er3+-Yb3+-Zn2+:Gd2O3 nanophosphors for efficient frequency upconverter and temperature sensing applications

Highlights: • The Er{sup 3+}-Yb{sup 3+}:Gd{sub 2}O{sub 3} nanophosphors infer the enhancement in UC emission intensity via incorporation of Li{sup +} and Zn{sup 2+} ions. • The average particles size of the developed nanophosphors is found to be lie in nanometer range by XRD and TEM analysis. • The maximum sensitivity ∼ 0.0116 K{sup −1} has been reported in the Er{sup 3+}-Yb{sup 3+}-Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors. • The colour coordinate for the developed Er{sup 3+}-Yb{sup 3+}-Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors lie in the greenish yellow colour region. - Abstract: Er{sup 3+}/Yb{sup 3+}/Li{sup +}/Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors synthesized via combustion synthesis method have been structurally and optically characterized. The average particles size of the developed nanophosphors has been found to be ∼ 25 nm by Transmission Electron Microscopy (TEM) analysis which is in good agreement with the X-rays Diffraction (XRD) results. The significant enhancement in upconversion (UC) emission intensity for green (∼ 20 and 70 times) and red (∼ 7 and 20 times) band have been observed after codoping with Li{sup +} and Zn{sup 2+} ions respectively in Er{sup 3+}-Yb{sup 3+}:Gd{sub 2}O{sub 3} system. The temperature sensing capability of the optimized nanophosphors has been studied corresponding to two thermally coupled {sup 2}H{sub 11/2} and {sup 4}S{sub 3/2} levels of the Er{sup 3+} ions. The sensitivity ∼ 0.0096 K{sup -1}, 0.00109 K{sup -1} and 0.0116 K{sup -1} have been reported in the Er{sup 3+}-Yb{sup 3+}:Gd{sub 2}O{sub 3}, Er{sup 3+}-Yb{sup 3+}- Li{sup +}:Gd{sub 2}O{sub 3} and Er{sup 3+}-Yb{sup 3+}- Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors respectively. The photometric characterizations of the developed nanophosphors have also been reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Measurement of G-phase volume fraction and number density in duplex stainless steels using transmission electron microscopy

Duplex stainless steels (DSS) have a high toughness and strength due the presence of both austenitic and ferritic phases. These alloys have had limited use in power production applications due to thermal embrittlement caused by spinodal decomposition and development of G-phase precipitates in the ferrite. Lean grade DSS alloys (e.g., 2101, 2003) may offer improved thermal stability due to the reduction of Cr- and Ni-equivalent elements when compared to standard grade compositions (e.g., 2205, 2209). The abundance of the G-phase was measured in five duplex stainless steels, three wrought alloys (2101, 2003, 2205) and their matching filler metals (2101-w, 2209-w), after aging at 427 °C for 1000 h and 10,000 h. The G-phase volume fraction, number density, size, and precipitate spacing were found using quantitative analysis of transmission electron microscopy dark field images and the composition of G-phase precipitates on other clusters were characterized with atom probe tomography (APT). In the welded alloys, the G-phase was found to develop rapidly, relative to the wrought material. A positive correlation was found between the nickel equivalent composition of the alloy and the G-phase volume fraction. The alloys 2205, 2209, and 2101-w, which are higher in Cr and Ni, all showed significant G-phase precipitation, further strengthening the hypothesis that lean grade DSS alloys are more thermally stable against precipitation in the ferrite. Electron diffraction showed a secondary phase present in the 2101 wrought alloy at 10,000 h, but it was not crystallographically consistent with the G-phase; APT showed the presence of nanoclusters rich in both nickel and copper for this alloy. In conclusion, no secondary phases or clusters were found in 2003 after 10,000 h of aging, so it may be a candidate alloy for applications that require long-life times at high operating temperatures.

36 MATERIALS SCIENCE↗

Covalent functionalization of metal oxide and carbon nanostructures with polyoctasilsesquioxane (POSS) and their incorporation in polymer composites

Polyoctasilsesquioxane (POSS) has been employed to covalently functionalize nanostructures of TiO{sub 2}, ZnO and Fe{sub 2}O{sub 3} as well as carbon nanotubes, nanodiamond and graphene to enable their dispersion in polar solvents. Covalent functionalization of these nanostructures with POSS has been established by electron microscopy, EDAX analysis and infrared spectroscopy. On heating the POSS-functionalized nanostructures, silica-coated nanostructures are obtained. POSS-functionalized nanoparticles of TiO{sub 2}, Fe{sub 2}O{sub 3} and graphite were utilized to prepare polymer-nanostructure composites based on PVA and nylon-6,6.

36 MATERIALS SCIENCE↗

Tollen’s reagent assisted synthesis of hollow polyaniline microsphere/Ag nanocomposite and its applications in sugar sensing and electromagnetic shielding

Graphical abstract: Probable scheme to demonstrate the mechanism of PnHMAg showing enhanced EMI shielding compared to PnHM. - Highlights: • Hollow polyaniline microsphere (PnHM) exhibits superior properties due to its enhanced surface to volume ratio. • PnHMAg has been used in developing efficient sensor for the detection of sugar. • Presence of Ag nanoparticles enhances the electrical conductivity of PnHMAg resulting in the improvement of electromagnetic interference shielding in both X- and S-band regions. • Such properties could be harnessed effectively for development of devices for commercial as well as national purposes. - Abstract: The present study is focused on synthesis of polyaniline hollow microspheres (PnHM) nanocomposites of silver (Ag) i.e., PnHMAg by emulsion polymerization of aniline and Tollen’s reagent as a source for Ag nanoparticles. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis of PnHMAg indicated presence of silver nanoparticles dispersed on polyaniline surface. The electrical conductivity of PnHMAg is increased by ∼6 times compared to PnHM. Cyclic voltammogram of PnHM in sugar sensing exhibits characteristics redox peaks at ∼0.09 (sugar) and ∼0.53 V (polyaniline). Interestingly, PnHMAg showed a single peak at ∼−0.18 V with increased intensity (∼5 times) indicating its high sugar sensing ability. PnHMAg also exhibits high shielding efficiency of 19.5 dB (11.2 GHz) due to the presence of highly conducting Ag nanoparticles. TEM studies confirmed that Ag nanoparticles are well distributed on PnHM. As a result, a continuous electronic path is developed due to enhanced interconnectivity of PnHM.

36 MATERIALS SCIENCE↗

Local and long-range atomic/magnetic structure of non-stoichiometric spinel iron oxide nanocrystallites

Spinel iron oxide nanoparticles of different mean sizes in the range 10–25 nm have been prepared by surfactant-free up-scalable near- and super-critical hydrothermal synthesis pathways and characterized using a wide range of advanced structural characterization methods to provide a highly detailed structural description. The atomic structure is examined by combined Rietveld analysis of synchrotron powder X-ray diffraction (PXRD) data and time-of-flight neutron powder-diffraction (NPD) data. The local atomic ordering is further analysed by pair distribution function (PDF) analysis of both X-ray and neutron total-scattering data. It is observed that a non-stoichiometric structural model based on a tetragonal γ-Fe 2 O 3 phase with vacancy ordering in the structure (space group P 4 3 2 1 2) yields the best fit to the PXRD and total-scattering data. Detailed peak-profile analysis reveals a shorter coherence length for the superstructure, which may be attributed to the vacancy-ordered domains being smaller than the size of the crystallites and/or the presence of anti-phase boundaries, faulting or other disorder effects. The intermediate stoichiometry between that of γ-Fe 2 O 3 and Fe 3 O 4 is confirmed by refinement of the Fe/O stoichiometry in the scattering data and quantitative analysis of Mössbauer spectra. The structural characterization is complemented by nano/micro-structural analysis using transmission electron microscopy (TEM), elemental mapping using scanning TEM, energy-dispersive X-ray spectroscopy and the measurement of macroscopic magnetic properties using vibrating sample magnetometry. Notably, no evidence is found of a Fe 3 O 4 /γ-Fe 2 O 3 core-shell nanostructure being present, which had previously been suggested for non-stoichiometric spinel iron oxide nanoparticles. Finally, the study is concluded using the magnetic PDF (mPDF) method to model the neutron total-scattering data and determine the local magnetic ordering and magnetic domain sizes in the iron oxide nanoparticles. The mPDF data analysis reveals ferrimagnetic collinear ordering of the spins in the structure and the magnetic domain sizes to be ∼60–70% of the total nanoparticle sizes. The present study is the first in which mPDF analysis has been applied to magnetic nanoparticles, establishing a successful precedent for future studies of magnetic nanoparticles using this technique.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of chemical composition and crystal structure in sintered Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet

The substitution of cerium, a more abundant rare-earth element, for sintered Nd-Fe-B magnets has drawn intense interest. In the present work, nominal composition of Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} (wt. %), with cerium constitutes increased to 50% of the total rare-earth content, was used. And Ce-free Nd{sub 30}Fe{sub bal}B{sub 1} (wt. %) was prepared by the same preparation process as comparison. The microstructure of the sintered magnets has been investigated by means of X-ray diffraction and transmission electron microscope. The results show that there are three kinds of RE-rich phases in the same magnet, i.e., fcc-(Ce,Nd)O{sub x} (a=0.547nm), hcp-(Ce,Nd){sub 2}O{sub 3} (a=0.386nm, c=0.604nm) and bcc-(Ce,Nd){sub 2}O{sub 3} (a=1.113nm). Ors of (140)(Ce,Nd){sub 2}Fe{sub 14}B// (1-21)bcc-(Ce,Nd){sub 2}O{sub 3}(∼3°), [001](Ce,Nd){sub 2}Fe{sub 14}B// [-214]bcc-(Ce,Nd){sub 2}O{sub 3}; (01-1)(Ce,Nd){sub 2}Fe{sub 14}B// (101)fcc- (Ce,Nd)O{sub x}(∼2°), [101](Ce,Nd){sub 2}Fe14B// [12-1]fcc-(Ce,Nd)O{sub x} were found through selected area electron diffraction (SAED) analysis. According to the analysis, it can be concluded that cerium has partly substituted for neodymium by occupying the corresponding atom sites in the Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet, without changing the crystal configuration.

36 MATERIALS SCIENCE↗

Capturing the crystalline phase of two-dimensional nanocrystal superlattices in action.

Critical photonic, electronic, and magnetic applications of two-dimensional nanocrystal superlattices often require nanostructures in perfect single-crystal phases with long-range order and limited defects. Here we discovered a crystalline phase with quasi-long-range positional order for two-dimensional nanocrystal superlattice domains self-assembled at the liquid-air interface during droplet evaporation, using in situ time-resolved X-ray scattering along with rigorous theories on two dimensional crystal structures. Surprisingly, it was observed that drying these superlattice domains preserved only an orientational order but not a long-range positional order, also supported by quantitative analysis of transmission electron microscopy images.

36 MATERIALS SCIENCE↗

Advanced techniques for characterization of ion beam modified materials

Understanding the mechanisms of damage formation in materials irradiated with energetic ions is essential for the field of ion-beam materials modification and engineering. Utilizing incident ions, electrons, photons, and positrons, various analysis techniques, including Rutherford backscattering spectrometry (RBS), electron RBS, Raman spectroscopy, high-resolution X-ray diffraction, small-angle X-ray scattering, and positron annihilation spectroscopy, are routinely used or gaining increasing attention in characterizing ion beam modified materials. The distinctive information, recent developments, and some perspectives in these techniques are reviewed in this paper. Applications of these techniques are discussed to demonstrate their unique ability for studying ion-solid interactions and the corresponding radiation effects in modified depths ranging from a few nm to a few tens of μm, and to provide information on electronic and atomic structure of the materials, defect configuration and concentration, as well as phase stability, amorphization and recrystallization processes. Finally, such knowledge contributes to our fundamental understanding over a wide range of extreme conditions essential for enhancing material performance and also for design and synthesis of new materials to address a broad variety of future energy applications.

36 MATERIALS SCIENCE↗

High-Energy Hybridized States Enable Long-Lived Hot Electrons in Cobaloxime-Silicon Nanocrystal System

Strong electronic coupling is achieved between the molecular catalyst cobaloxime ([Co]) and silicon nanocrystals (Si NCs) bridged by an ethylenepyridine group derived from vinylpyridine (vpy) covalently bound to the Si NC surface (Si-vpy-[Co]). The ethylenepyridine tether in Si-vpy-[Co] is key to dramatic changes to the system’s physical properties which are not observed in the corresponding formylpyridine (fpy) system (Si-fpy-[Co]) consistent with strong electronic coupling previously observed only in dark electrochemical systems. UV−vis absorption spectroscopy reveals new [Co]-centered electronic states in Si-vpy-[Co], and transient absorption spectroscopy finds a strong absorption feature appearing within 250 fs and persisting for at least 5 ns. Astoundingly, spectroelectrochemical measurements reveal that this absorption feature is consistent with both the singly reduced [Co] − and doubly reduced [Co] 2− complexes, leading to the conclusion that these long-lived charges are derived from high-energy “hot” electrons residing in [Co]-centered states. Detailed analysis using cyclic voltammetry, spectroelectrochemistry, electron paramagnetic resonance spectroscopy, and density functional theory (DFT) calculations provides insight into the unique electronic structure created in Si-vpy-[Co]. DFT reveals that the new electronic states arise from hybridization between deep Si NC band states and high-energy molecular orbitals of the ethylenepyridine tether and the [Co] catalyst and are facilitated by σ-bonding character at the ethylenepyridine linkage. This study demonstrates that strong electronic coupling achieved through precise molecular chemistry can change the paradigm of otherwise fixed energy levels in hybrid photoelectrochemical systems for artificial photosynthesis and related applications.

14 SOLAR ENERGY↗

Observation of gapped state in rare-earth monopnictide HoSb

The rare-earth monopnictide family is attracting an intense current interest driven by its unusual extreme magnetoresistance (XMR) property and the potential presence of topologically non-trivial surface states. The experimental observation of non-trivial surface states in this family of materials are not ubiquitous. Here, using high-resolution angle-resolved photoemission spectroscopy, magnetotransport, and parallel first-principles modeling, we examine the nature of electronic states in HoSb. Although we find the presence of bulk band gaps at the G and X-symmetry points of the Brillouin zone, we do not find these gaps to exhibit band inversion so that HoSb does not host a Dirac semimetal state. Our magnetotransport measurements indicate that HoSb can be characterized as a correlated nearly-complete electron-hole-compensated semimetal. Our analysis reveals that the nearly perfect electron-hole compensation could drive the appearance of non-saturating XMR effect in HoSb.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical structure of the (Zn{sub 1-x},Mg{sub x})O/CuIn(S,Se){sub 2} interface in thin film solar cells

The formation of the interface between a magnetron sputtered (Zn{sub 1-x},Mg{sub x})O buffer layer and a CuIn(S,Se){sub 2} absorber in thin film solar cells has been investigated by x-ray photoelectron spectroscopy and x-ray induced Auger electron spectroscopy. Detailed analysis of the spectra shows the incorporation of Zn into the absorber surface in the initial stage of the deposition process forming ZnS and/or ZnSe bonds. As a result we find the buffer layer to be Zn-depleted near the interface.

36 MATERIALS SCIENCE↗

On the role of a nonscalar electron pressure in the collisionless magnetic reconnection

Collisionless tearing instability in a sheared force-free magnetic field is considered in the framework of electron magnetohydrodynamics. A rigorous analytical analysis demonstrates that the bulk inertia of electrons is the dominant reconnection mechanism in a sufficiently low-{beta} plasma, when the reconnection current sheet width exceeds the electron gyroradius. Otherwise a fluidlike approach fails, and fully kinetic treatment of the problem is required. A recently raised issue of the role of the electron gyroviscous cancellation in collisionless reconnection is also addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the bonding nature of electron states for the Fe-Mo double perovskite

The electronic transport as well as the effect of an external magnetic field has been investigated on manganese-based materials, spinels and perovskites. Potential applications of double perovskites go from magnetic sensors to electrodes in solid-oxide fuel cells; besides the practical interests, it is known that small changes in composition modify radically the physical properties of double perovskites. We have studied the Sr{sub 2}FeMoO{sub 6} double perovskite compound (SFMO) using first-principles density functional theory. The calculations were done within the generalized gradient approximation (GGA) scheme with the Perdew-Burke-Ernzerhof (PBE) functional. We have made a detailed analysis of each electronic state and the charge density maps around the Fermi level. For the electronic properties of SFMO it was used a primitive cell, for which we found the characteristic half-metallic behavior density of states composed by e{sub g} and t{sub 2g} electrons from Fe and Mo atoms. Those peaks were tagged as bonding or antibonding around the Fermi level at both, valence and conduction bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic field impact on the laser heating in MagLIF

Prior to implosion in Magnetized Liner Inertial Fusion (MagLIF), the fuel is heated to temperatures on the order of several hundred eV with a multi-kJ, multi-ns laser pulse. In this paper, we present two laser heated plasma experiments, relevant to the MagLIF preheat stage, performed at Z with beryllium liners filled with deuterium and a trace amount of argon. In one experiment, there is no magnetic field and, in the other, the liner and fuel are magnetized with an 8.5 T axial magnetic field. The recorded time integrated, spatially resolved spectra of the Ar K-shell emission are sensitive to electron temperature T e . Individual analysis of the spatially resolved spectra produces electron temperature distributions T e (z) that are resolved along the axis of laser propagation. In the experiment with magnetic field, the plasma reaches higher temperatures and the heated region extends deeper within the liner than in the unmagnetized case. Radiation magnetohydrodynamics simulations of the experiments are presented and post-processed. A comparison of the results from experimental and simulated data reveals that the simulations underpredict T e in both cases but the differences are larger in the case with magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗