Search NASA⌕ Search

SEARCH · Search NASA

Results for “evaluation study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Correction for FDG PET dose extravasations: Monte Carlo validation and quantitative evaluation of patient studies

Purpose: Current procedure guidelines for whole body [18F]fluoro-2-deoxy-D-glucose (FDG)-positron emission tomography (PET) state that studies with visible dose extravasations should be rejected for quantification protocols. Our work is focused on the development and validation of methods for estimating extravasated doses in order to correct standard uptake value (SUV) values for this effect in clinical routine. Methods: One thousand three hundred sixty-seven consecutive whole body FDG-PET studies were visually inspected looking for extravasation cases. Two methods for estimating the extravasated dose were proposed and validated in different scenarios using Monte Carlo simulations. All visible extravasations were retrospectively evaluated using a manual ROI based method. In addition, the 50 patients with higher extravasated doses were also evaluated using a threshold-based method. Results: Simulation studies showed that the proposed methods for estimating extravasated doses allow us to compensate the impact of extravasations on SUV values with an error below 5%. The quantitative evaluation of patient studies revealed that paravenous injection is a relatively frequent effect (18%) with a small fraction of patients presenting considerable extravasations ranging from 1% to a maximum of 22% of the injected dose. A criterion based on the extravasated volume and maximum concentration was established in order to identify this fraction of patients that might be corrected for paravenous injection effect. Conclusions: The authors propose the use of a manual ROI based method for estimating the effectively administered FDG dose and then correct SUV quantification in those patients fulfilling the proposed criterion.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

1-D fluid model of atmospheric-pressure rf He+O{sub 2} cold plasmas: Parametric study and critical evaluation

In this paper atmospheric-pressure rf He+O{sub 2} cold plasmas are studied by means of a 1-D fluid model. 17 species and 60 key reactions selected from a study of 250+ reactions are incorporated in the model. O{sub 2}{sup +}, O{sub 3}{sup -}, and O are the dominant positive ion, negative ion, and reactive oxygen species, respectively. Ground state O is mainly generated by electron induced reactions and quenching of atomic and molecular oxygen metastables, while three-body reactions leading to the formation of O{sub 2} and O{sub 3} are the main mechanisms responsible for O destruction. The fraction of input power dissipated by ions is {approx}20%. For the conditions considered in the study {approx}6% of the input power is coupled to ions in the bulk and this amount will increase with increasing electronegativity. Radial and electrode losses of neutral species are in most cases negligible when compared to gas phase processes as these losses are diffusion limited due to the large collisionality of the plasma. The electrode loss rate of neutral species is found to be nearly independent of the surface adsorption probability p for p > 0.001 and therefore plasma dosage can be quantified even if p is not known precisely.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data analysis study and performance evaluation of the scanning laser Doppler system

A simulation program which provided information on theoretically expected vortex spectra, evaluations of potential algorithms, and expected location accuracies for given scan patterns is presented. Field tests using an aircraft engine flow field and aircraft vortices during flyby tests were compared to the results of the simulation. From these studies, a vortex location algorithm was developed which provided vortex location for one or two vortices as a function of time. Results of this algorithm used on data from flyby tests were used to study vortex transport, to evaluate system performance, and to provide suggestions for real-time vortex location algorithms. The results of real-time analysis were compared to those which were expected based on theoretical considerations.

Sonnenschein, C. M.↗

Phenome‐to‐genome insights for evaluating root system architecture in field studies of maize

Abstract Understanding the genetic basis of root system architecture (RSA) in crops requires innovative approaches that enable both high‐throughput and precise phenotyping in field conditions. In this study, we evaluated multiple phenotyping and analytical frameworks for quantifying RSA in mature, field‐grown maize in three field experiments. We used forward and reverse genetic approaches to evaluate >1700 maize root crowns, including a diversity panel, a biparental mapping population, and maize mutant and wild‐type alleles at two known RSA genes,DEEPER ROOTING 1(DRO1) andRootless1(Rt1). We show the utility of increasing the dimensionality of traditional two‐dimensional (2D) techniques, referred to as the “2D multi‐view” method, to improve the capture of whole root system information for mapping genetic variation influencing RSA. Comparison of univariate and multivariate genome‐wide association study (GWAS) approaches revealed that multivariate traits were effective at dissecting complex RSA phenotypes and identifying pleiotropic quantitative trait loci (QTLs). Overall, three‐dimensional (3D) root models generated from X‐ray computed tomography and digital phenotyping captured a larger proportion of RSA trait variations compared to other methods of root phenotyping, as evidenced by both genome‐wide and single‐gene analyses. Among the individual root traits, root pulling force emerged as a highly heritable estimate of RSA that identified the largest number of shared QTLs with 3D phenotypes. Our study shows that integrating complementary phenotyping technologies helps to provide a more comprehensive understanding of the genetic architecture of RSA in field‐grown maize.

Genetics & Heredity↗

An Approach for Assessing Development and Deployment Risks in the DOE Fuel Cycle Options Evaluation and Screening Study

Abstract One of the key objectives of the U.S. Department of Energy (DOE) Nuclear Energy R&D Roadmap is the development of sustainable nuclear fuel cycles that can improve natural resource utilization and provide solutions to the management of nuclear wastes. Recently, an evaluation and screening (E&S) of fuel cycle systems has been conducted to identify those options that provide the best opportunities for obtaining such improvements and also to identify the required research and development activities that can support the development of advanced fuel cycle options. In order to evaluate and screen the E&S study included nine criteria including Development and Deployment Risk (D&DR). More specifically, this criterion was represented by the following metrics: Development time, development cost, deployment cost from prototypic validation to first-of-a-kind commercial, compatibility with the existing infrastructure, existence of regulations for the fuel cycle and familiarity with licensing, and existence of market incentives and/or barriers to commercial implementation of fuel cycle processes. Given the comprehensive nature of the study, a systematic approach was needed to determine metric data for the D&DR criterion, and is presented here. As would be expected, the Evaluation Group representing the once-through use of uranium in thermal reactors is always the highest ranked fuel cycle Evaluation Group for this D&DR criterion. Evaluation Groups that consist of once-through fuel cycles that use existing reactor types are consistently ranked very high. The highest ranked limited and continuous recycle fuel cycle Evaluation Groups are those that recycle Pu in thermal reactors. The lowest ranked fuel cycles are predominately continuous recycle single stage and multi-stage fuel cycles that involve TRU and/or U-233 recycle.

Gehin, Jess C↗

A study on nondestructive evaluation technique by the use of interface guided waves on shrink fit structure

Guided wave was widely studied for plate and pipe due to the great application area. Guided wave has advantage on long distance inspection for an inaccessible area and apart from transducer. Quite often shrink fit structures were found in nuclear power facilities. In this paper, two pipes were designed with perfect shrink fit condition for Stainless Steel 316. The displacement distribution was calculated with boundary condition. The interface wave propagation pattern was analyzed by the numerical modeling. The experimental results show a possibility of weld delamination and defect detection.

36 MATERIALS SCIENCE↗

An integrated approach for water scarcity evaluation—a case study of Yunnan, China

In this paper, an integrated approach based on multiple indicators and individual and combinational evaluation methods is proposed to evaluate water scarcity. Four evaluation methods are employed, and their results are joined through three combination methods in order to obtain a consistent evaluation. This iterative-correction approach has been applied to Yunnan Province in China for water scarcity evaluation. The results demonstrate the capability of the iterative-correction framework to provide insightful analyses of water scarcity. Diqing Tibetan Autonomous Prefecture (Diqing) and Nujiang Li Autonomous Prefecture (Nujiang) ranked 1st and 2nd, indicating the best situation for water scarcity evaluation, while Yuxi and Zhaotong ranked 15th and 16th, indicating the worst situation. Two types of major water scarcities were observed in Yunnan Province. One was a typical representative of lack of water quality in the central part of Yunnan, and the other was a typical engineering type in the western part of Yunnan. The water scarcity has been found to arise from non-judicious water use, rapid urbanization and lack of protective measures for water resources. Finally and therefore, it is necessary to conduct more water conservancy projects in future to alleviate the water scarcity issue.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Liver Stiffness After Radioembolization by Real-Time ShearWave™ Elastography: Preliminary Study

PurposeTo evaluate the effect of ShearWave™ elastography (SWE) for the assessment of liver fibrosis after radioembolization (RE) in patients with liver malignancies.Materials and MethodsWe prospectively examined the effects of SWE before and after RE in 17 adult patients, from June 2012 to September 2013. All patients underwent SWE within 1 month before and 3 months (96.3 ± 22.9 days) after RE. Measurements were taken in segments III, IV, V, and VI (lateral/medial left lobe and anterior/posterior right lobe, respectively). Liver stiffness was studied in the 39 treated segments.ResultsThe mean stiffness of liver tissue according to the pre-RE SWE measurements was not different from the post-RE SWE measurements in the segments that did not undergo RE. Conversely, segments treated with RE were significantly stiffer according to the post-RE SWE measurements (mean SWE 17.4 kPa) than according to the baseline measurements (7.0 kPa) (p < 0.001). Patients with hepatocellular carcinoma and preexisting infection with hepatitis B and C viruses had higher pre-embolization stiffness, and the post-embolization stiffness of the treated segments in these patients was higher than that in the remainder of the study population.ConclusionThese data suggest that SWE measurements of liver stiffness increase as early as the third month after RE. SWE could be used as a noninvasive complementary imaging method for preliminary assessment of liver fibrosis before and after RE.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Review of the Use of Wearables in Indoor Environmental Quality Studies and an Evaluation of Data Accessibility from a Wearable Device

An understanding of indoor environmental quality (IEQ) and its effects on occupant well-being can inform building system design and operation. The use of wearables in field studies to collect subjective and objective health performance indicators (HPIs) from a large number of occupants could deliver important improvements in IEQ. To facilitate the use of wearables in IEQ studies, there is a need to identify which HPIs should be collected and to evaluate data accessibility from these devices. To address this issue, a literature review of previous IEQ studies was conducted to identify relationships between different IEQ factors and HPIs, with a focus on HPIs that were collected using wearables. A preliminary assessment of data accessibility from a selected wearable device (Fitbit Versa 2) was performed and documented. The review suggested the need to further investigate and collect sleep quality parameters, heart rate, stress response, as well as subjective ratings of comfort using wearables. The data accessibility assessment revealed issues related to missing data points and data resolution from the examined device. A set of recommendations is outlined to inform future studies.

60 APPLIED LIFE SCIENCES↗

Model Evaluation and Sensitivity Studies for Determining Aircraft Effects on the Global Atmosphere

This project, started in July 1995 and ending in July 1996, related: to evaluation of the possible importance of soot and sulfur dioxide emissions from subsonic and supersonic aircraft; to research contributions and special responsibilities for NASA AEAP assessments of subsonic aircraft and High Speed Civil Transport aircraft; and to science team responsibilities supporting the development of the three-dimensional atmospheric chemistry model of the Global Modeling Initiative.

Wuebbles, Donald J.↗

Space solar power. Description of concept, results of preliminary studies, requirements for evaluation

The nation is actively pursuing alternate sources of energy because of the problems or concerns related to obtaining required energy for the future from oil, gas, nuclear, and coal sources. Solar energy is an obvious candidate for consideration. Its use in the past has been limited by the relative cost of collecting and converting solar energy into electrical power. The increasing costs of other energy sources will make solar energy more attractive. During recent years a new concept for the collection of solar energy has been developed. This concept involves the location of solar power stations in space. The concept, results of preliminary studies, and requirements for space evaluation of such a project are discussed.

Source record↗

Economic evaluation: Concepts, selected studies, system costs, and a proposed program

The more usual approaches to valuing crop information are reviewed and an integrated approach is recommended. Problems associated with implementation are examined. What has already been accomplished in the economic evaluation of LACIE-type information is reported including various studies of benefits. The costs of the existing and proposed systems are considered. A method and approach is proposed for further studies.

Osterhoudt, F. H.↗

Evaluation of Experimental Studies in the U-Rich Region of the U-Pu Phase Diagram

Upon the re-examination of two experimental studies, additional thermophysical data pertaining to the uranium-rich portion of the uranium-plutonium binary phase diagram have been elucidated. The first study involved the analysis of solidification cooling curves following the processing of U-Pu alloys. Two phase transitions (liquidus and bcc) were evaluated and the results agreed very well with the established boundaries. The second study was actually performed over sixty years ago but still warrants recognition due to the paucity of thermodynamic data on the U-Pu system to date. From the investigation, the activity coefficients of plutonium in liquid uranium from 1813 K to 2042 K were derived assuming Henry’s law from which the partial molar excess Gibbs energy change of plutonium was obtained: Δ G-bar {sup ex}=R∗T∗ln γ{sub Pu}{sup o}=− 76694+39.2∗T(J/mol).

36 MATERIALS SCIENCE↗

An avionics sensitivity study. Volume 2: Evaluation of airborne navigation system performance during RNAV/MLS transition

A computer simulation was modified to generate a suitable data base for performance of an avionics sensitivity study during RNAV/MLS transition. The avionics sensitivity data provides information necessary to establish requirements for additional guidance law design during transition and to establish airspace requirements for maneuvering to null out any residual RNAV errors upon MLS transition. The data base is also beneficial as planning information for subsequent flight testing.

Heine, W.↗

The MERRA-2 Aerosol Reanalysis, 1980 Onward. Part II: Evaluation and Case Studies

The Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2) is NASA’s latest reanalysis for the satellite era (1980-present) using the Goddard Earth Observing System version 5 (GEOS-5) Earth system model. MERRA-2 provides several improvements over its predecessor (MERRA), including the inclusion of interactive aerosols for the entire period. In addition to assimilating bias-corrected Aerosol Optical Depth (AOD) from the Moderate Resolution Imaging Spectroradiometer (MODIS) on the Terra and Aqua satellites, it also includes the assimilation of bias-corrected AOD from Advanced Very High Resolution Spectroradiometer (AVHRR) instruments, Multi-angle Imaging SpectroRadiometer (MISR) AOD over bright surfaces, and ground-based Aerosol Robotic Network (AERONET) AOD. This paper is the second of a pair that summarizes our efforts to assess the quality of the MERRA-2 aerosol assimilation. In this study, we first follow previous work performed with version 1 of the MERRA Aerosol Reanalysis (MERRAero) using independent observations. The evaluation of MERRA-2 Absorption Aerosol Optical Depth (AAOD) and ultra-violet Aerosol Index (UV-AI) against the Ozone Monitoring Instrument (OMI) observations show good agreement, particularly over dusty regions where our previous efforts improved model aerosol optical properties. Next, we find that aerosol assimilation system improves the aerosol vertical structure when compared to estimates from the same version of the model without AOD assimilation. A similar conclusion is found for MERRA-2 aerosol surface fine particulate matter (PM (sub 2.5)). However, deficiencies in the forward model such as missing emissions noted during the MERRAero study still explain the MERRA-2 PM(sub 2.5) bias relative to observations over the United States. Finally, to illustrate successes and weaknesses of the AOD assimilation, we focus on the performance of the MERRA-2 aerosol system during several major aerosol events: the Mount Pinatubo eruption in 1991, a Saharan dust event and transportation over the Atlantic Ocean during April 2010, the Rim Fire of summer 2013 in California, and an extreme pollution event over China in January 2013. We conclude with a summary that points to best practices for utilizing the MERRA-2 aerosol reanalysis in future studies.

V Buchard↗

Evaluation of a proposed expert system development methodology: Two case studies

Two expert system development projects were studied to evaluate a proposed Expert Systems Development Methodology (ESDM). The ESDM was developed to provide guidance to managers and technical personnel and serve as a standard in the development of expert systems. It was agreed that the proposed ESDM must be evaluated before it could be adopted; therefore a study was planned for its evaluation. This detailed study is now underway. Before the study began, however, two ongoing projects were selected for a retrospective evaluation. They were the Ranging Equipment Diagnostic Expert System (REDEX) and the Backup Control Mode Analysis and Utility System (BCAUS). Both projects were approximately 1 year into development. Interviews of project personnel were conducted, and the resulting data was used to prepare the retrospective evaluation. Decision models of the two projects were constructed and used to evaluate the completeness and accuracy of key provisions of ESDM. A major conclusion reached from these case studies is that suitability and risk analysis should be required for all AI projects, large and small. Further, the objectives of each stage of development during a project should be selected to reduce the next largest area of risk or uncertainty on the project.

Gilstrap, Lewey↗

A Comparative Evaluation and Selection of High-Temperature Heat Exchangers for Application to Integrated Energy Systems

The following report aims to create a refined and well-structured method for comparatively evaluating heat exchanger technologies for integrated energy systems that caters customers’ specific needs while meeting engineering requirements. For the evaluation, this study elevates previous evaluation metrics, enhances the knowledge base via literature and market surveys, and identifies the figures of merit with robust rationales to enhance the quality of decisions made throughout the proposed heat exchanger evaluation process. The heat exchanger designs evaluated as part of the case study are shell and tube heat exchangers, printed circuit heat exchangers, plate heat exchangers, spiral heat exchangers, and heat pipe heat exchangers. The information presented in this report is meant for industries interested in making a preliminary screening process to identify the most suitable heat exchanger design for their application of interest.

42 ENGINEERING↗

A Comparative Evaluation and Selection of High-Temperature Heat Exchangers for Application to Integrated Energy Systems

The following report aims to create a refined and well-structured method for comparatively evaluating heat exchanger technologies for integrated energy systems that caters customers’ specific needs while meeting engineering requirements. For the evaluation, this study elevates previous evaluation metrics, enhances the knowledge base via literature and market surveys, and identifies the figures of merit with robust rationales to enhance the quality of decisions made throughout the proposed heat exchanger evaluation process. The heat exchanger designs evaluated as part of the case study are shell and tube heat exchangers, printed circuit heat exchangers, plate heat exchangers, spiral heat exchangers, and heat pipe heat exchangers. The information presented in this report is meant for industries interested in making a preliminary screening process to identify the most suitable heat exchanger design for their application of interest.

42 - ENGINEERING↗