Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Interaction of Two Active Region Filaments Observed by NVST and SDO

Using high spatial and temporal resolution H α data from the New Vacuum Solar Telescope (NVST) and simultaneous observations from the Solar Dynamics Observatory , we present the rare event of the interaction between two filaments (F1 and F2) in AR 11967 on 2014 January 31. The adjacent two filaments were almost perpendicular to each other. Their interaction was driven by the movement of F1 and started when the two filaments collided with each other. During the interaction, the threads of F1 continuously slipped from the northeast to the southwest, and were accompanied by the brightenings at the junction of two filaments and the northeast footpoint of F2. Part of F1 and the main body of F2 became invisible in H α wavelength due to the heating and the motion of F2. At the same time, bright material initiated from the junction of two filaments were observed to move along F1. The magnetic connectivities of F1 were found to be changed after their interaction. These observations suggest that magnetic reconnection was involved in the interaction of two filaments and resulted in the eruption of one filament.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Investigation of Shock-Shock Interactions Over a 2D Wedge at M = 6

The effects of fin-leading-edge radius and sweep angle on peak heating rates due to shock-shock interactions were investigated in the NASA Langley Research Center 20-Inch Mach 6 Air Tunnel. The fin model leading edges, which represent cylindrical leading edges or struts on hypersonic vehicles, were varied from 0.25 inches to 0.75 inches in radius. A 9° wedge generated a planar oblique shock at 16.7° to the flow that intersected the fin bow shock, producing a shock-shock interaction that impinged on the fin leading edge. The fin angle of attack was varied from 0° (normal to the free-stream) to 15° and 25° swept forward. Global temperature data were obtained from the surface of the fused silica fins through phosphor thermography. Metal oil flow models with the same geometries as the fused silica models were used to visualize the streamline patterns for each angle of attack. High-speed zoom-schlieren videos were recorded to show the features and temporal unsteadiness of the shock-shock interactions. The temperature data were analyzed using one-dimensional semi-infinite as well as one- and two-dimensional finite-volume methods to determine the proper heat transfer analysis approach to minimize errors from lateral heat conduction due to the presence of strong surface temperature gradients induced by the shock interactions. The general trends in the leading-edge heat transfer behavior were similar for the three shock-shock interactions, respectively, between the test articles with varying leading-edge radius. The dimensional peak heat transfer coefficient augmentation increased with decreasing leading-edge radius. The dimensional peak heat transfer output from the two-dimensional code was about 20% higher than the value from a standard, semi-infinite one-dimensional method.

shock-shock interaction↗

Preliminary Compendium of the Initial Conditions and Evolution of the Fundamental Interactions of SiC with Ag and Pd

Tri-structural isotropic (TRISO) particles are the fuel of choice for very-high temperature reactors. At the core, these spherical particles consist of an inner fuel kernel of UO{sub 2}, UC{sub 2} or a combination of both, which is coated radially outward by successive layers of low density pyrolytic graphite, an inner high density pyrolytic graphite layer, silicon carbide (SiC) and an outer high density pyrolytic graphite layer. SiC is the main diffusion barrier against the release of fission products due to its hardness and high melting point. Irradiation testing of TRISO particles indicates that trace amounts of metallic fission products can damage or potentially escape through the barrier layer. Surrogate experimental studies have previously been performed by various methods seeking to shed light on and explain the diffusion behavior of Ag and Pd. Although some of these experiments have yielded realistic diffusion coefficients the discrepancy of results between different groups is such that the essential details of the diffusive behavior are still to be fully understood. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. Theoretical simulations of the diffusion of Ag through SiC have been exhaustive but typically yield bulk diffusion coefficients that due to the nature of bulk diffusion phenomena (i.e. slow diffusion) the diffusion coefficients are calculated to be orders of magnitude lower than what experimental observations suggest. This in part is due to the difficulty in simulating realistic models that include various polymorphs of SiC, and the dynamical structural transformations that SiC undergoes in the TRISO environment (which are also to be explained). The result is a particularly challenging problem to solve given that the initial conditions of the interactions of Ag and Pd with SiC are difficult to address, both in theoretical models and surrogate experiments. In order to improve these models the approach taken here is to consider fundamental interactions between Ag and SiC that take place in short time scales by varying the initial environmental conditions, i.e. annealing temperature and time, initial amounts of the metallic species (M) Ag, Pd in SiC/M/SiC multilayers. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. In order to do so we have synthesized SiC/Ag/SiC and SiC/Pd/SiC multilayers of various thicknesses by PLD and characterized them using SEM/EDS. Initial results show that upon annealing Ag agglomerates and ruptures the SiC layer to be released. In the case of Pd a strong chemical interaction is deduced from the slow interlayer diffusion and limited release. Further studies using photoelectron spectroscopy and RHEED will be carried out in order obtain detailed information on the chemical and physical transitions that undergo upon annealing of these systems. (authors)

36 MATERIALS SCIENCE↗

The Crystal Structure of CD8alpha,Beta in Complex With YTS156.7.7 Fab And Interaction With Other CD8 Antibodies Define the Binding Mode of CD8alpha,Beta to MHC Class I

The CD8{alpha}{beta} heterodimer interacts with class I pMHC on antigen-presenting cells as a co-receptor for TCR-mediated activation of cytotoxic T cells. To characterize this immunologically important interaction, we used monoclonal antibodies (mAbs) specific to either CD8{alpha} or CD8{beta} to probe the mechanism of CD8{alpha}{beta} binding to pMHCI. The YTS156.7 mAb inhibits this interaction and blocks T cell activation. To elucidate the molecular basis for this inhibition, the crystal structure of the CD8{alpha}{beta} immunoglobulin-like ectodomains were determined in complex with mAb YTS156.7 Fab at 2.7 {angstrom} resolution. The YTS156.7 epitope on CD8{beta} was identified and implies that residues in the CDR1 and CDR2-equivalent loops of CD8{beta} are occluded upon binding to class I pMHC. To further characterize the pMHCI/CD8{alpha}{beta} interaction, binding of class I tetramers to CD8{alpha}{beta} on the surface of T cells was assessed in the presence of anti-CD8 mAbs. In contrast to YTS156.7, mAb YTS105.18, which is specific for CD8{alpha}, does not inhibit binding of CD8{alpha}{beta} to class I tetramers, indicating the YTS105.18 epitope is not occluded in the pMHCI/CD8{alpha}{beta} complex. Together, these data indicate a model for the pMHCI/CD8{alpha}{beta} interaction similar to that observed for CD8{alpha}{alpha} in the CD8{alpha}{alpha}/pMHCI complex, but in which CD8{alpha} occupies the lower orientation (membrane proximal to the antigen presenting cell), and CD8{beta} occupies the upper position (membrane distal). The implication of this molecular assembly for the function of CD8{alpha}{beta} in T cell activation is discussed.

36 MATERIALS SCIENCE↗

Final state interactions and the transverse structure of the pion using non-perturbative eikonal methods

In the factorized picture of semi-inclusive hadronic processes the naive time-reversal odd parton distributions exist by virtue of the gauge link which renders it color gauge invariant. The link characterizes the dynamical effect of initial/final-state interactions of the active parton due soft gluon exchanges with the target remnant. Though these interactions are non-perturbative, studies of final-state interaction have been approximated by perturbative one-gluon approximation in Abelian models. Here, we include higher-order gluonic contributions from the gauge link by applying non-perturbative eikonal methods incorporating color degrees of freedom in a calculation of the Boer–Mulders function of the pion. Using this framework we explore under what conditions the Boer–Mulders function can be described in terms of factorization of final state interactions and a spatial distribution in impact parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DFT-based mesoscopic interactions of N adatoms on Cu(100)

The first-principles density functional theory (DFT) method is used to directly calculate the interactions of N atoms of various configurations on Cu(100) surfaces. This allows us to derive a mesoscopic substratemediated interaction model. We find that, for these Cu(100)-supported two-dimensional N clusters, oscillating substrate-mediated interactions obtained from an elastic eigenvector approach including a mesoscopic interacting range (called the mesoscopic model) have reasonable agreement with the DFT results. The DFT periodic boundary conditions are properly mapped into the mesoscopic model. The model is used to analyze the energies of c(2×2) square islands independent of their sizes. Previous experimental studies have shown that, in the low coverage region, N atoms agglomerate to isolated square islands of about 5 nm × 5 nm in size with a c(2×2) structure. With increasing coverage, those islands form regular patterns but do not touch below about 0.4 monolayers. From previous experiments and calculations, the square island pattern shows significant elastic effects which are now confirmed.

74 ATOMIC AND MOLECULAR PHYSICS↗

A measurement of material in the ATLAS tracker using secondary hadronic interactions in 7 TeV pp collisions

Knowledge of the material in the ATLAS inner tracking detector is crucial in understanding the reconstruction of charged-particle tracks, the performance of algorithms that identify jets containing b-hadrons and is also essential to reduce background in searches for exotic particles that can decay within the inner detector volume. Interactions of primary hadrons produced in pp collisions with the material in the inner detector are used to map the location and amount of this material. The hadronic interactions of primary particles may result in secondary vertices, which in this analysis are reconstructed by an inclusive vertex-finding algorithm. Data were collected using minimum-bias triggers by the ATLAS detector operating at the LHC during 2010 at centre-of-mass energy √s = 7 TeV, and correspond to an integrated luminosity of 19 nb -1 . Kinematic properties of these secondary vertices are used to study the validity of the modelling of hadronic interactions in simulation. Finally, secondary-vertex yields are compared between data and simulation over a volume of about 0.7 m 3 around the interaction point, and agreement is found within overall uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Repeating collisions in an optical trap and the evaluation of spin-dependent interactions among neutral particles

A dynamic process of repeating collisions of a pair of trapped neutral particles with weak spin-dependent interaction is designed and studied. A related theoretical derivation and numerical calculation have been performed to study the inherent coordinate-spin and momentum-spin correlations. Because of the repeating collisions, the effect of the weak interaction can be accumulated and enlarged, and therefore can be eventually detected. Numerical results suggest that the Cr-Cr interaction, which has not yet been completely clarified, could thereby be determined. The design can be used in general to determine various interactions among neutral atoms and molecules, in particular for the determination of very weak forces.

74 ATOMIC AND MOLECULAR PHYSICS↗

Destruction of {sup 7}Be in big bang nucleosynthesis via long-lived sub-strongly interacting massive particles as a solution to the Li problem

We identify reactions which destroy {sup 7}Be and {sup 7}Li during big bang nucleosynthesis (BBN) in the scenario of BBN catalyzed by a long-lived sub-strongly-interacting massive particle (sub-SIMP or X particle). The destruction associated with nonradiative X captures of the nuclei can be realized only if the interaction strength between an X particle and a nucleon is properly weaker than that between two nucleons to a degree depending on the mass of X. Binding energies of nuclei to an X particle are estimated taking the mass and the interaction strength to nuclei of the X as input parameters. Nuclear reaction rates associated with the X are estimated naively and adopted in calculating evolutions of nuclear abundances. We suggest that the {sup 7}Li problem, which might be associated with as-yet-unrecognized particle processes operating during BBN, can be solved if the X particle interacts with nuclei strongly enough to drive {sup 7}Be destruction but not strongly enough to form a bound state with {sup 4}He of relative angular momentum L=1. Justifications of this scenario by rigorous calculations of reaction rates using quantum mechanical many-body models are highly desirable since this result involves many significant uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effective 3-Body Interaction for Mean-Field and Density-Functional Theory

Density functionals for nuclei usually include an effective 3-body interaction that depends on a fractional power of the density. Using insights from the many-body theory of the low-density two-component Fermi gas, we consider a new, nonlocal, form for the energy functional that is consistent with the Fock-space representation of interaction operators. In particular, there is a unique spatially nonlocal generalization of the contact form of the interaction that preserves the {rho}{sup 7/3} density dependence required by the many-body theory. We calculate the ground-state energies for particles in a harmonic trap by using the nonlocal induced 3-body interaction and compare them to numerically accurate Green's function Monte Carlo calculations. Using no free parameters, we find that a nonlocality in the space domain provides a better description of the weak-coupling regime than the local-density approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of CC and CCQE Interactions at SciBooNE

We report measurements of charged current inclusive and quasielastic interactions of muon neutrinos on carbon with an average energy of 0.8 GeV by SciBooNE experiment at Fermilab. These two results are complementary to understand the neutrino-nuclear interaction in the few-GeV region with effects of final state interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identifying the Signatures of Intermolecular Interactions in Blends of PM6 with Y6 and N4 Using Absorption Spectroscopy

Abstract In organic solar cells, the resulting device efficiency depends strongly on the local morphology and intermolecular interactions of the blend film. Optical spectroscopy was used to identify the spectral signatures of interacting chromophores in blend films of the donor polymer PM6 with two state‐of‐the‐art nonfullerene acceptors, Y6 and N4, which differ merely in the branching point of the side chain. From temperature‐dependent absorption and luminescence spectroscopy in solution, it is inferred that both acceptor materials form two types of aggregates that differ in their interaction energy. Y6 forms an aggregate with a predominant J‐type character in solution, while for N4 molecules the interaction is predominantly in a H‐like manner in solution and freshly spin‐cast film, yet the molecules reorient with respect to each other with time or thermal annealing to adopt a more J‐type interaction. The different aggregation behavior of the acceptor materials is also reflected in the blend films and accounts for the different solar cell efficiencies reported with the two blends.

Kroh, Daniel↗

Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries

Anion solvation in electrolytes can largely change the electrochemical performance of the electrolytes, yet has been rarely investigated. Herein, three anions of bis(trifluoromethanesulfonyl)imide (TFSI), bis(fluorosulfonyl)imide (FSI), and derived asymmetric (fluorosulfonyl)(trifluoro-methanesulfonyl)imide (FTFSI) are systematically examined in a weakly Li + cation solvating solvent of bis(3-fluoropropyl)ether (BFPE). In-situ liquid secondary ion mass spectrometry demonstrates that FTFSI - and FSI - anions are associated with BFPE solvent, while weak TFSI - /BFPE cluster signals are detected. Molecular modeling further reveals that the anion–solvent interaction is accompanied by the formation of H-bonding-like interactions. Further, anion solvation enhances the Li + cation transfer number and reduces the organic component in solid electrolyte interphase, which enhances the Li plating/stripping Coulombic efficiency at a low temperature of -30 °C from 42.4% in TFSI-based electrolytes to 98.7% in 1.5 m LiFTFSI and 97.9% in LiFSI-BFPE electrolytes. The anion–solvent interactions, especially asymmetric anion solvation also accelerate the Li + desolvation kinetics. The 1.5 m LiFTFSI-BFPE electrolyte with strong anion–solvent interaction enables LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||Li (20 µm) full cell with stable cyclability even under -40 °C, retaining over 92% of initial capacity (115 mAh g -1 , after 100 cycles). The anion–solvent interactions insights allow to rational design the electrolyte for lithium metal batteries and beyond to achieve high performance.

25 ENERGY STORAGE↗

Long‐Range Non‐Coulombic Electron–Electron Interactions between LaAlO 3 /SrTiO 3 Nanowires

Abstract The LaAlO 3 /SrTiO 3 system exhibits unusual magnetic and superconducting behavior arising from electron–electron interactions whose physical origin is not well understood. Quantum transport techniques, especially those involving mesoscopic geometries, can offer insight into these interactions. Here evidence for long‐range electron–electron interactions in LaAlO 3 /SrTiO 3 nanowires, measured through the phenomenon of frictional drag, is reported, in which current passing through one nanowire induces a voltage across a nearby electrically isolated nanowire. Frictional drag mediated by the Coulomb interaction is predicted to decay exponentially with interwire separation, but with the LaAlO 3 /SrTiO 3 nanowire system it is found to be nearly independent of separation. Frictional drag experiments performed with three parallel wires demonstrate long‐range frictional coupling even in the presence of an electrically grounded central wire. Collectively, these results provide evidence for a new long‐range non‐Coulombic electron–electron interaction unlike anything previously reported for semiconducting systems.

Tang, Yuhe↗

Influence of Polymer and Support Interactions on the Electrocatalytic Properties of Heterogenized Molecular Complexes

Heterogenized molecular catalysts have been the subject of increasing interest in the context of electrochemical small molecule activation due to the possibility of active site homogeneity and tunability, which can surpass many nanostructured materials. When molecular catalysts strongly interact with carbon supports through π–π interactions, they tend to show higher selectivity and activity during heterogeneous electrochemical reactions. Indeed, ligand modifications in the secondary sphere that allow for more π–π overlap between catalyst and carbon support often show improved performance. Interactions between catalyst and polymer binder are also a possible modulus of control in these reactions, either through coordinating moieties that interact with active sites or through control over substrate or product transport. Finally, the covalent linking of molecular complexes onto carbon materials has also been shown to result in high activity and stability. Recent advances in the use of carbon supports, both through covalent and non-covalent interactions, and polymers to alter small molecule activation by heterogenized molecular catalysts are summarized in this Perspective.

Johnson, Elizabeth K. [University of Virginia, Cha↗

The impact of coupled air–sea interaction on extreme East Asian summer monsoon simulation in CMIP5 models

Abstract In this study, the relationship between the ability to simulate air–sea interactions over the western North Pacific (WNP), and to reproduce the extreme East Asian summer monsoon (EASM), were investigated by comparing the performances of several global climate models (GCMs). High ranked in air–sea interaction simulation (HRA) and low ranked in air–sea interaction simulation (LRA) models were selected, according to their performance in simulating relations between sea surface temperature (SST) and precipitation over the WNP, from the ensemble of models that participated in the third and fifth phases of the Coupled Model Intercomparison Project (CMIP3, CMIP5). Compared with CMIP3 models, CMIP5 models exhibited improved simulations of the distinctive air–sea interaction over the WNP, namely, the strong atmospheric forcing on the ocean. Among CMIP5 models, HRA models, which reproduced intrinsic negative correlations between precipitation and SST over the WNP, could simulate the extreme EASM better than LRA models. In particular, HRA models generated a more realistic spatial distribution of the extreme EASM compared with LRA models. The defects of the LRA models resulted from distorted synoptic fields, including underestimated geopotential height and overestimated low‐level wind over the WNP, inducing unrealistic moisture supply and convection due to the exaggerated SST forcing. In contrast, reasonable air–sea interactions represented in HRA models lead to realistic synoptic fields over the WNP, and proper simulation of the extreme EASM.

Kim, Taehyung↗

Probing non-standard neutrino interactions with supernova neutrinos at Hyper-K

Non-standard neutrino self interactions (NSSI) could be stronger than Fermi interactions. We investigate the ability to constrain these four-neutrino interactions by their effect on the flux of neutrinos originating from a galactic supernova. In the dense medium of a core collapse supernova, these new self interactions can have a significant impact on neutrino oscillations, leading to changes at the flavor evolution and spectra level. We use simulations of the neutrino flux from a 13 solar mass, core collapse supernova at 10 kpc away, and numerically propagate these neutrinos through the stellar medium taking into account vacuum/MSW oscillations, SM ν – ν scattering as well as ν – ν interactions that arise from NSSI. We pass the resulting neutrino flux to a simulation of the future Hyper-Kamiokande detector to see what constraints on NSSI parameters are possible when the next galactic supernova becomes visible. We find that these constraints depend strongly on the neutrino mass hierarchy and if the NSSI is flavor-violating or preserving. Sensitivity to NSSI in the normal hierarchy (NH) at Hyper-K is limited by the experiment’s ability to efficiently detect ν e , but deviations from no NSSI could be seen if the NSSI is particularly strong. In the inverted hierarchy (IH) scenario, Hyper-K can significantly improve constraints on flavor-violating NSSI down to O(10 –1 )G F .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identifying dark matter interactions in monojet searches

We study the discrimination of quark-initiated jets from gluon-initiated jets in monojet searches for dark matter using the technique of averaged jet energy profiles. We demonstrate our results in the context of effective field theories of dark matter interactions with quarks and gluons, but our methods apply more generally to a wide class of models. Different effective theories of dark matter and the standard model backgrounds each have a characteristic quark/gluon fraction for the leading jet. When used in conjunction with the traditional cut-and-count monojet search, the jet energy profile can be used to set stronger bounds on contact interactions of dark matter. In the event of a discovery of a monojet excess at the 14 TeV LHC, contact interactions between dark matter with quarks or with gluons can be differentiated at the 95% confidence level. For a given rate at the LHC, signal predictions at direct detection experiments for different dark matter interactions can span five orders of magnitude. Lastly, the ability to identify these interactions allows us to make a tighter connection between LHC searches and direct detection experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗