Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni-Si-B filler metal

Brazing of a nitrogen-containing duplex stainless steel was preformed using a nickel-based filler metal (Ni-4.5wt.%, Si-3.2wt.%, B). The microstructure of the brazed joint was investigated using scanning electron microscopy, energy dispersive spectrometry, electron probe microanalyzer, and layer-by-layer X-ray diffraction analysis. The results indicated that before completion of isothermal solidification, BN, Ni{sub 3}B and Ni{sub 3}Si precipitates formed at the interface, in the athermally solidified zone and isothermally solidified zone, respectively. After isothermal solidification, only {gamma}-Ni phase appeared in the brazed interlayer. The appearance of hardness peak values in the athermally solidified zone and the interface most probably corresponded to the formation of Ni{sub 3}B and BN, respectively.

36 MATERIALS SCIENCE↗

Ti particle-reinforced surface layers in Al: Effect of particle size on microstructure, hardness and wear

Two types of Ti particles are used in an ultrasonic impact peening (UIP) process to modify sub-surface layers of cp aluminium atomized, with an average size of approx. 20 {mu}m and milled (0.3-0.5 {mu}m). They are introduced into a zone of severe plastic deformation induced by UIP. The effect of Ti particles of different sizes on microstructure, phase composition, microhardness and wear resistance of sub-surface composite layers in aluminium is studied in this paper. The formed layers of a composite reinforced with smaller particles have a highly misoriented fine-grain microstructure of its matrix with a mean grain size of 200-400 nm, while reinforcement with larger particles results in relatively large Al grains (1-2 {mu}m). XRD, SEM, EDX and TEM studies confirm significantly higher particle/matrix bonding in the former case due to formation of a Ti{sub 3}Al interlayer around Ti particles with rough surface caused by milling. Different microstructures determine hardness and wear resistance of reinforced aluminium layers: while higher magnitudes of microhardness are observed for both composites (when compared with those of annealed and UIP-treated aluminium), the wear resistance is improved only in the case of reinforcement with small particles.

36 MATERIALS SCIENCE↗

Microstructural study of transient liquid phase bonded DD98 and K465 superalloys at high temperature

Microstructure of a transient liquid phase (TLP) bonded joint between single crystal DD98 and polycrystalline K465 superalloys was investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. After bonding at 1190 deg. C for 2 h, many phases formed in the centerline of the bonding zone due to an incompletely solidified liquid interlayer. There are script-like, tree-like and blocky compounds besides solid solution {gamma} phase in this region. The script-like phase is CrB boride that is rich in Cr, the tree-like compound rich in Ni is M{sub 23}B{sub 6} with FCC structure, and the blocky phase enriched in Ti, Ta, and Nb, is MC carbide that resulted from the interdiffusion of C atoms between dissimilar base metals. After TLP bonding, many blocky and fine M{sub 6}C particles rich in Cr and W appeared in the diffusion zone of the K465 side. A number of blocky and platelet M{sub 3}B{sub 2} borides rich in W, Cr and Mo precipitated in the diffusion zone of the DD98 side. - Research Highlights: {yields} DD98 and K465 alloy was TLP bonded. {yields} The microstructure changes of different parts were studied. {yields} CrB, M{sub 23}B{sub 6} and MC formed in the bonding zone. {yields} M{sub 6}C appeared in diffusion zone of K465 side and M{sub 3}B{sub 2} existed in diffusion zone of DD98 side.

36 MATERIALS SCIENCE↗

Structural, vibrational and morphological properties of layered double hydroxides containing Ni{sup 2+}, Zn{sup 2+}, Al{sup 3+} and Zr{sup 4+} cations

Layered double hydroxides are anionic clays with formula [M{sup II}{sub 1−x} M{sup III}{sub x}(OH){sub 2}]{sup q+}[A{sup n−}]{sub q/n}·mH{sub 2}O, finding possible uses as catalyst support, adsorbents and so on. In this paper, we address the phase formation of layered double hydroxides containing Ni{sup 2+}, Zn{sup 2+}, Al{sup 3+} and Zr{sup 4+} cations, namely, NiZn-Al, NiZn-AlZr and NiZn-Zr compositions obtained by the coprecipitation method. Such systems were characterized by X-ray diffraction, confirming the phase formation for NiZn-Al and NiZn-AlZr samples. Infrared and Raman spectroscopies elucidated the anion and water molecules occurrence in the interlayer. Nitrogen physisorption (BET method) determined the presence of pores and specific surface area. The isotherm shapes were Type IV, according to the IUPAC, and represent a mesoporous structure. A morphological study was performed by means of scanning and transmission electron microscopies, and particle size values of 120, 131 and 235 nm for NiZn-Al, NiZn-AlZr and NiZn-Zr, respectively, were determined. Thermogravimetric analysis of the decomposition of the systems revealed that their complete disintegration occurred at ~ 450 °C and resulted in mixed oxides.

36 MATERIALS SCIENCE↗

Preparation of poly(aniline-co-o-anisidine)-intercalated mesostructured manganese oxide composites by exchange reaction

Layered mesostructured manganese oxide (mesostructured MnO{sub 2}) was synthesized using manganese chloride and lithium hydroxide as the raw materials and cetyltrimethylammonium bromide (CTAB) as the structure-directing agent. Poly(aniline-co-o-anisidine)-intercalated mesostructured MnO{sub 2} composites (P(An-co-oAs)/MnO{sub 2}) were synthesized in an organic solvent through the exchange reaction between the CTAB in MnO{sub 2} gallery and the P(An-co-oAs). The interlayer spacing (I{sub c} values) of mesostructured MnO{sub 2} enlarged from 2.52 to 4.41 nm as the added amount of P(An-co-oAs) increased from 0 to 0.5 g per 0.5 g of mesostructured MnO{sub 2}. The regularity of the layered structure of the composites was firstly decreased due to intercalation of low amounts of P(An-co-oAs). However, with increasing the intercalated amount of P(An-co-oAs) the layered structure of the composites becomes more regular. The electrical conductivity of the composites is 10{sup 2} to 10{sup 3} times higher than that of the mesostructured MnO{sub 2}.

36 MATERIALS SCIENCE↗

A new synthesis of lamellar-mesostructured silica by using poly(ethylene glycol) distearate as template

A lamellar-mesostructured silica has been synthesized by using poly(ethylene glycol) distearate as template in ethanol solution. Highly ordered lamellar mesostructure was confirmed by X-ray diffraction pattern, transmission electronic microscopy, and nitrogen adsorption-desorption isotherm. The material obtained in this work has a large interlayer distance, and good thermal and mechanical stabilities, which can favor the preparation of the in situ polymerized nanocomposites based on intercalation of polymers in the lamellar-mesostructured silica.

36 MATERIALS SCIENCE↗

Changes in the surfaces on DDOAB organoclays adsorbed with paranitrophenol-An XRD, TEM and TG study

The adsorption of paranitrophenol on organoclays synthesised by the ion exchange of the surfactant molecule dimethyldioctadecylammonium bromide (DDOAB) of formula (CH{sub 3}(CH{sub 2}){sub 17}){sub 2}NBr(CH{sub 3}){sub 2} has been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis. The expansion of the montmorillonite depends on the loading of the montmorillonite with dimethyldioctadecylammonium bromide and is related to the arrangement of the surfactant molecules within the clay interlayer. This expansion is altered by the adsorbed paranitrophenol and is observed in the transmission electron microscopic images of the organoclay with adsorbed paranitrophenol. Changes in the surfactant molecular arrangements were analysed by thermogravimetry. The paranitrophenol is sublimed simultaneously with the loss of surfactant. The dehydroxylation temperature of the montmorillonite is decreased upon adsorption of the paranitrophenol indicating a bonding between the paranitrophenol and the hydroxyl units of the montmorillonite.

36 MATERIALS SCIENCE↗

Lanthanides-clay nanocomposites: Synthesis, characterization and optical properties

Complexes of Europium(III) and Terbium(III) with 2,2-bipyridine and 1,10-phenanthroline were inserted into Na-bentonite by ion exchange reactions at room temperature. The products display interlaminar distances and stoichiometries in agreement with the ion exchange capacity and the interlayer space available in the clay. The optical properties of the intercalates, being qualitatively similar to those of the free complexes, are additionally improved with respect to exchange processes with the medium, especially in a moist environment. The protection again hydrolysis, together with the intensity of the optical transition {sup 5}D{sub 0}-{sup 5}F{sub 2} observed in the nanocomposite, makes these products promising for the development of novel optical materials.

36 MATERIALS SCIENCE↗

High-temperature chemical and microstructural transformations of an organic-inorganic nanohybrid captopril intercalated Mg-Al layered double hydroxide

The thermal evolution of a crystalline organic-inorganic nanohybrid captopril intercalated Mg-Al layered double hydroxide (LDH) [Mg{sub 0.68}Al{sub 0.32}(OH){sub 2}] (C{sub 9}H{sub 13}NO{sub 3}S){sub 0.130}(CO{sub 3}){sub 0.030}.0.53H{sub 2}O obtained by coprecipitation method is studied based upon in situ high-temperature X-ray diffraction, in situ infrared and thermogravimetric analysis coupled with mass spectroscopy analysis. The results reveal that a metastable quasi-interstratified layered nanohybrid involving carbonate-LDH and reoriented less ordered captopril-LDH was firstly observed as captopril-LDH heat-treated between 140 and 230 deg. C. The major decomposition/combustion of interlayer organics occur between 270 and 550 deg. C. A schematic model on chemical and microstructural evolution of this particular drug-inorganic nanohybrid upon heating in air atmosphere is proposed.

36 MATERIALS SCIENCE↗

Synthesis, molecular structure, and characterization of a new 3D-layered inorganic-organic hybrid material: [D/L-C{sub 6}H{sub 13}O{sub 2}N-H]{sub 3}[(PO{sub 4})W{sub 12}O{sub 36}].4.5H{sub 2}O

A new 3D-layered inorganic-organic hybrid [D/L-C{sub 6}H{sub 13}O{sub 2}N-H]{sub 3}[(PO{sub 4})W{sub 12}O{sub 36}].4.5H{sub 2}O (1), as racemic material in the solid phase, has been synthesized and fully characterized by elemental microanalysis, single crystal X-ray diffraction, and infrared, Raman, and proton nuclear magnetic resonance spectroscopes. The most unique structural feature of 1 is its three-dimensional inorganic infinite tunnel-like framework that results in weak van der Waals interactions along the a-axis. A weak interlayer interaction between the titled layers provides a desirable condition to explore its potential as a host in a host-guest complex. The racemization has been observed in the crystal structure with the centric space group (P2{sub 1}/c). The latter consists of {alpha}-[(PO{sub 4})W{sub 12}O{sub 36}]{sup 3-}and [D/L-C{sub 6}H{sub 13}O{sub 2}N-H]{sup +} moieties with water molecules linked together by a complex network of hydrogen bond interactions.

36 MATERIALS SCIENCE↗

Intercalation of Ru(II) tris (1,10-phenanthroline) complex in {alpha}- and {gamma}-zirconium dihydrogen phosphate. Synthesis, thermal behaviour and X-ray characterization

Layered inorganic systems such as ion-exchangers ({alpha}- and {gamma}-zirconium dihydrogen phosphate) already used as hosts for larger cations, were studied for the intercalation of Ru(II) tris (1,10-phenanthroline) complex into these host matrices. The uptake of the complex occurs using the batch method; the colour of the materials changes from white to brilliant orange; the highest ion uptake is obtained in the case of the {gamma}-phase. The materials obtained are thermally stable up to {approx}350 {sup o}C and the complex decomposition occurs in two ({alpha}-phase) or three ({gamma}-phase) steps. The complex decomposition is complete at {approx}700 {sup o}C and at 550 {sup o}C (respectively for {alpha}- and {gamma}-Ru(II) materials). As can be seen from the X-ray patterns, the Ru(II) materials are still layered and show a new phase with an increase in the interlayer distance with respect to the starting materials. The hydrogen form is always present in the case of the {alpha}-materials; whereas, in the case of the {gamma}-materials, it is present when {<=}0.12 moles of the complex/mole of exchanger are inserted. Microanalysis measurements confirm the fact that the Ru(II) complex is not modified when exchanged.

36 MATERIALS SCIENCE↗

Preparation and electrochemical properties of lamellar MnO{sub 2} for supercapacitors

Lamellar birnessite-type MnO{sub 2} materials were prepared by changing the pH of the initial reaction system via hydrothermal synthesis. The interlayer spacing of MnO{sub 2} with a layered structure increased gradually when the initial pH value varied from 12.43 to 2.81, while the MnO{sub 2}, composed of {alpha}-MnO{sub 2} and {gamma}-MnO{sub 2}, had a rod-like structure at pH 0.63. Electrochemical studies indicated that the specific capacitance of birnessite-type MnO{sub 2} was much higher than that of rod-like MnO{sub 2} at high discharge current densities due to the lamellar structure with fast intercalation/deintercalation of protons and high utilization of MnO{sub 2}. The initial specific capacitance of MnO{sub 2} prepared at pH 2.81 was 242.1 F g{sup -1} at 2 mA cm{sup -2} in 2 mol L{sup -1} (NH{sub 4}){sub 2}SO{sub 4} aqueous electrolyte. The capacitance increased by about 8.1% of initial capacitance after 200 cycles at a current density of 100 mA cm{sup -2}.

36 MATERIALS SCIENCE↗

Design of magnetic and fluorescent Mg-Al layered double hydroxides by introducing Fe{sub 3}O{sub 4} nanoparticles and Eu{sup 3+} ions for intercalation of glycine

We describe a novel route for the preparation of magnetic and fluorescent magnesium-aluminum layered double hydroxides by introducing Fe{sub 3}O{sub 4} nanoparticles and Eu{sup 3+} ions. From the powder X-ray diffraction results, it was found that the Fe{sub 3}O{sub 4} nanoparticles were highly dispersed in the inner void of octahedral lattice, and the Eu{sup 3+} ions substituted for the Al{sup 3+} ions and entered into hydrotalcite lattice through isomorphous replacement. Moderate introduction of Fe{sub 3}O{sub 4} nanoparticles and Eu{sup 3+} ions did not change the lamellar structure of magnesium-aluminum layered double hydroxides. Glycine can also be intercalated into this magnetic and fluorescent layered double hydroxides by ion-exchange method. After intercalation of glycine, the basal spacing of magnetic and fluorescent layered double hydroxides increased from 7.6 to 8.8 A, indicating that glycine was successfully intercalated into the interlayer space of layered double hydroxides. Magnetic measurements reveal that these novel layered double hydroxides possess paramagnetic property at room temperature, and the emission and excitation spectra indicate the layered double hydroxides exhibit fluorescent property.

36 MATERIALS SCIENCE↗

Solid-state synthesis and electrical properties of polyaniline/Cu-montmorillonite nanocomposite

In this paper, the solid-state synthesis of polyaniline/Cu-montmorillonite nanocomposite is reported. Mixture of anilinium chlorure and Cu exchanged montmorillonite was grinded at room temperature while we vary the molar rate of aniline to interlayer Cu{sup 2+} cations (R) from 0.5 to 6. The properties of the hybrid compounds are characterized by X-ray diffraction, thermogravimetric analysis, SEM, FTIR and impedance spectroscopy. The results showed that the structure and the conductivity of PANI in hybrid materials depend on R. The ac conduction showed a regime of constant dc conductivity at low frequencies and a crossover to a frequency-dependent regime of the type A {omega}{sup s} at high frequencies.

36 MATERIALS SCIENCE↗

New solid acids in the triple-layer Dion-Jacobson layered perovskite family

Research highlights: {yields} New triple-layer Dion-Jacobson layered perovskite solid solutions synthesized. {yields} New series of Ta-doped layered perovskite solid acids, HCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10}. {yields} New series of Sr-doped layered perovskite solid acids, HCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10}. {yields} Layered perovskites with highest Ta content are weaker solid acids than HCa{sub 2}Nb{sub 3}O{sub 10}. -- Abstract: Dion-Jacobson type layered perovskites such as A'Ca{sub 2}Nb{sub 3}O{sub 10} (A' = K, Rb, H) have continued to be of great interest due to their compositional variability, rich interlayer chemistry, and wide range of physical properties. In this study, we investigated the range and effects of substitutional doping of Ta{sup 5+} for Nb{sup 5+} and of Sr{sup 2+} for Ca{sup 2+} in A'Ca{sub 2}Nb{sub 3}O{sub 10}. We have prepared and characterized three new solid solutions: KCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10}, RbCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10}, and RbCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10}. These materials all readily undergo proton exchange to form two new series of hydrated solid acid phases, which in most cases can be dehydrated to form stable HCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10} and HCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10} compounds. Intercalation studies with n-hexylamine and pyridine were carried out to gauge the relative Bronsted acidities across the HCa{sub 2}Nb{sub 3-x}Ta{sub x}O{sub 10} series, and we determined that materials with the highest tantalum contents are weaker acids than the parent compound HCa{sub 2}Nb{sub 3}O{sub 10}. Preliminary intercalation studies with pyridine for the HCa{sub 2-x}Sr{sub x}Nb{sub 3}O{sub 10}.yH{sub 2}O solid acids, however, showed no significant difference in acidity with varying strontium content.

36 MATERIALS SCIENCE↗

Electron beam induced structural evolution in Fe{sub 3}O{sub 4}/SiO{sub 2} particles: A new route to obtain movable core structures

Graphical abstract: SiO{sub 2} hollow spheres with movable Fe{sub 3}O{sub 4} cores were obtained by exposing the Fe{sub 3}O{sub 4}/SiO{sub 2} particles to the electron beam of TEM. It is a new route to obtain movable core nanostructures. Research highlights: {yields} SiO{sub 2} hollow particles with movable Fe{sub 3}O{sub 4} cores were obtained. {yields} Irradiation of electron beam induced the structural evolution. {yields} A new route to obtain hollow particles with movable core. -- Abstract: SiO{sub 2} hollow spheres with movable Fe{sub 3}O{sub 4} core were obtained by exposing the pre-synthesized Fe{sub 3}O{sub 4}/SiO{sub 2} particles (with an adsorption interlayer of ethylene glycol) under the irradiation of electron beam inside transmission electron micrograph (TEM). In the formation process, the evaporation of adsorbed ethylene glycol and the evolution of amorphous SiO{sub 2} layer played important roles, and that should be attributed to the high temperature and trapped charges induced by the irradiation of electron beam. This work provided a new route to obtain particles with movable core structure and extended the applications of electron beam.

36 MATERIALS SCIENCE↗

Synthesis, characterization, and controlled release anticorrosion behavior of benzoate intercalated Zn-Al layered double hydroxides

Graphical abstract: The benzoate anion released from Zn-Al LDHs provides a more effective long-term protection against corrosion of Q235 carbon steel in 3.5% NaCl solution. Highlights: {yields} A benzoate anion corrosion inhibitor intercalated Zn-Al layered double hydroxides (LDHs) has been assembled by coprecipitation method. {yields} The kinetic simulation indicates that the ion-exchange one is responsible for the release process and the diffusion through particle is the rate limiting step. {yields} A significant reduction of the corrosion rate is observed when the LDH nanohybrid is present in the corrosive media. -- Abstract: Corrosion inhibitor-inorganic clay composite including benzoate anion intercalated Zn-Al layered double hydroxides (LDHs) are assembled by coprecipitation. Powder X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectrum analyses indicate that the benzoate anion is successfully intercalated into the LDH interlayer and the benzene planes are vertically bilayer-positioned as a quasi-guest ion-pair form in the gallery space. Kinetic simulation for the release data, XRD and FT-IR analyses of samples recovered from the release medium indicate that ion-exchange is responsible for the release process and diffusion through the particle is also indicated to be the rate-limiting step. The anticorrosion capabilities of LDHs loaded with corrosion inhibitor toward Q235 carbon steel are analyzed by polarization curve and electrochemical impedance spectroscopy methods. Significant reduction of corrosion rate is observed when the LDH nanohybrid is present in the corrosive medium. This hybrid material may potentially be applied as a nanocontainer in self-healing coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Innovative process for submicronic Cu particle deposition onto various substrates

Highlights: Black-Right-Pointing-Pointer New process for deposition of copper nanoparticles onto various substrates. Black-Right-Pointing-Pointer Functionalization with phosphorus to enhance chemical bonding between Cu and substrate. Black-Right-Pointing-Pointer Control of size, number and location of the deposited particles. Black-Right-Pointing-Pointer Applicable to other metals, possibility to solve problems of assembling in many fields. -- Abstract: The efficiency of composite materials heavily relies on the ability of assembled materials to form strong interfaces, for allowing a good transfer of properties. High chemical affinity between the assembled materials is beneficial to the composite, whereas the assembly of materials with a weak mutual affinity is more difficult. When the interface is known to be non-cohesive, additional elements are commonly used to bond the matrix to the reinforcements. In the case of copper and carbon bonding, boron and chromium layers are frequently used . These additional bonding layers can, however, affect the properties of the composite, degrading for instance its mechanical or thermal properties. We report here an innovative process enabling the selective deposition of copper nanoparticles on substrates of various types (carbon fibers (CF) or nanofibers (CNF), diamond particles, silicon (Si) wafer, alumina plate) and shapes (1D, 2D, 3D). The deposition process involves a phosphate reagent used to functionalize the substrates. Cu nanoparticles deposit precisely onto the functionalized sites of the substrate and can then be used to bond the matrix to reinforcements with weak chemical affinity, such as copper with carbon fibers or diamond particles, therefore avoiding the use of interlayers which might be detrimental to the assembly properties. From a broader perspective, we anticipate that the method described here could enable the deposition of particles of many materials (Cu, Mn, Ti, Ni) onto substrates of various shapes and dimensions, creating bonding layers between materials of low chemical affinity and making easier their assembly without degrading its properties.

36 MATERIALS SCIENCE↗