Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

From classical to quantum dynamics of atomic and ionic species interacting with graphene and its analogue

Graphene and its analogues offer a broad range of application opportunities for (opto)-electronics, sensing, catalysis, phase separation, energy conversion and storage, etc. Engineering graphene properties often relies on its controllable functionalization, defect formation and patterning, and reactive gas etching. In this chapter, we survey the dynamics of graphene using classical and quantum-classical dynamics methods. We discuss the reactivity, scattering, and transmission of atomic and ionic species including Ar cluster ion, H/D, and H+/D+ on graphene flakes of various sizes, focusing on the atomic-scale motion and energy dissipation pathways involved in forming and breaking covalent bonding. Discussions on the nuclear quantum effects of light species, the effects of isotopic substitution, and the methodologies for such modeling are also included.

Garashchuk, Sofiya V.↗

Experimental evaluation of a semi-open membrane-based absorption heat pump system utilizing ionic liquids

While the use of energy efficient absorption heat pumps has been typically limited to the high capacity commercial and industrial applications, the use of a semi-open absorption heat pump for water heating has been demonstrated to be an energy efficient alternative for residential scale applications. A semi-open absorption system uses ambient water vapor as the refrigerant in the absorber where its heat of phase change is transferred to the process water, cooling the solution in the absorber. The solution is pumped to the desorber, where by adding heat, the water vapor is released from the solution and condensed in the condenser. The heat of phase change of water vapor is transferred to process water again in the condenser. This cycle when implemented with a membrane-based absorber in a plate and frame form of heat exchanger using ionic liquids can overcome the challenges related to the system architecture of conventional absorption heat pumps like the lower efficiency at small scale, crystallization/corrosion issues with the desiccants and the high cost of hermetically sealed components. The cycle COP for such a system was previously demonstrated by Chugh et al. for high humidity conditions. In this experimental study, design improvements were made that expand the system’s applicability to more practical and standardized test conditions. With these improvements, the performance of the system was evaluated. The results presented in this study demonstrate the improved system’s viability as a heat pump water heater conforming to standard water heater test conditions. Performance was measured at a cycle thermal COP of 1.2 with a hot water delivery water temperature of 56 °C and ambient air at 19 °C and 49% RH.

42 ENGINEERING↗

Modeling the diffusion of Na+ in compacted water-saturated Na-bentonite as a function of pore water ionic strength

Assessments of bentonite barrier performance in waste management scenarios require an accurate description of the diffusion of water and solutes through the barrier. A two-compartment macropore/nanopore model (on which smectite interlayer nanopores are treated as a distinct compartment of the overall pore space) was applied to describe the diffusion of {sup 22}Na{sup +} in compacted, water-saturated Na-bentonites and then compared with the well-known surface diffusion model. The two-compartment model successfully predicted the observed weak ionic strength dependence of the apparent diffusion coefficient (D{sub a}) of Na{sup +}, whereas the surface diffusion model did not, thus confirming previous research indicating the strong influence of interlayer nanopores on the properties of smectite clay barriers. Since bentonite mechanical properties and pore water chemistry have been described successfully with two-compartment models, the results in the present study represent an important contribution toward the construction of a comprehensive two-compartment model of compacted bentonite barriers.

54 ENVIRONMENTAL SCIENCES↗

Biocatalytic synthesis of polymeric nanowires by micellar templates of ionic surfactants

Highlights: {yields} Soft-template production of polyguaiacol nanowire was done by peroxidase enzyme. {yields} Main advantage of this simple method is producing soluble encapsulated nanowires. {yields} Nanowire can be easily precipitated and separated by dilution with distilled water. {yields} Size tuned templates of sodium decyl sulfate (d = 2.7 nm) gave nanowires with d = 2-4 nm. {yields} Dried surfactant-coated wires recover freshly on specified and desired applications. -- Abstract: Micelle-templated polyguaiacol nanowires were successfully prepared via polymerization oxidation of guaiacol (o-methoxy phenol) by peroxidase enzyme in the presence of hydrogen peroxide at mild reaction conditions. The dimensions of the prepared nanowires were controlled by tuning the size and shape of the micelle structure via changing and controlling the type, chain length and molar concentrations of the ionic surfactant. The progress of the reaction and estimation of the size of soft micellar templates were followed by UV-Vis spectroscopy and dynamic light scattering (DLS). The resulting micelle encapsulated or purified polyguaiacol nanowires were characterized using transmission electron microscopy (TEM).

60 APPLIED LIFE SCIENCES↗

The ionic liquid 1-octyl-3-methylimidazolium (M8OI) is an activator of the human estrogen receptor alpha

Highlights: • M8OI activates the human ERα and induces TFF1 in MCF7 cells. • M8OI is a super-activator of the mouse ERβ variant 2 receptor. • M8OI does not activate the human ERβ. Recent environmental sampling around a landfill site in the UK demonstrated that unidentified xenoestrogens were present at higher levels than control sites; that these xenoestrogens were capable of super-activating (resisting ligand-dependent antagonism) the murine variant 2 ERβ and that the ionic liquid 1-octyl-3-methylimidazolium chloride (M8OI) was present in some samples. To determine whether M8OI was a contributor to the xenoestrogen pool in the soils, activation of human estrogen receptors by M8OI was examined. M8OI activated the human ERα in MCF7 cells in a dose-response manner. These effects were inhibited by the ER antagonist ICI182780; occurred in the absence of any metabolism of M8OI and were confirmed on examination of ER-dependent induction of trefoil factor 1 mRNA in MCF7 cells. M8OI also super-activated the murine variant 2 ERβ in a murine hepatopancreatobiliary cell line. The human ERβ was not activated by M8OI when expressed in HEK293 cells. These data demonstrate that M8OI is a xenoestrogen capable of activating the human ERα and super-activating the murine variant 2 ERβ.

60 APPLIED LIFE SCIENCES↗

Comparison of autohydrolysis and ionic liquid 1-butyl-3-methylimidazolium acetate pretreatment to enhance enzymatic hydrolysis of sugarcane bagasse

The aim of this work was to evaluate the efficiency of an ionic liquid (IL) 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) pretreatment (110 C for 30 min) in comparison to high severity autohydrolysis pretreatment in terms of delignification, cellulose crystallinity and enzymatic digestibility. The increase in severity of autohydrolysis pretreatment had positive effect on glucan digestibility, but was limited by the crystallinity of cellulose. [C4mim][OAc] pretreated sugarcane bagasse exhibited a substantial decrease in lignin content, reduced cellulose crystallinity, and enhanced glucan and xylan digestibility. Glucan and xylan digestibility was determined as 97.4% and 98.6% from [C4mim][OAc] pretreated bagasse, and 62.1% and 57.5% from the bagasse autohydrolyzed at 205 C for 6 min, respectively. The results indicated the improved digestibility and hydrolysis rates after [C4mim][OAc] pretreatment when compared against a comparable autohydrolyzed biomass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Solutions of the Ionic Liquid 1-butyl-3-methylimidazolium Chloride Denature Proteins

As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.

59 BASIC BIOLOGICAL SCIENCES↗

Room-temperature fabrication of garnet-type solid-electrolyte: Optimizing particle size for high ionic conductivity

Dense and uniform Li 6.25 Al 0.25 La 3 Zr 2 O 12 (Al-doped LLZO) solid-electrolyte film of ~24 µm thickness is successfully fabricated by room temperature aerosol deposition (AD) method. The process optimization study revealed that careful control of particle size and morphology is one of critical determinants in the development of a compact AD membrane. Notably, our method facilitated an impressive ionic conductivity of approximately 10 –5 S cm –1 , bypassing the necessity for post-annealing processes, a milestone in itself. However, it is hypothesized that the attained conductivity is somewhat restrained by factors such as smaller grain size and potential surface degradation due to moisture exposure during fabrication, indicating avenues for further research. Looking forward, detailed investigations into the film's microstructure and its impact on transport properties will be a focal point, alongside potential enhancements through post-annealing and particle coating strategies. Finally, this research hints at a promising trajectory for the development of high-efficiency solid-state battery technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the effect of temperature gradient on moisture and ionic transport in concrete

Most reinforced concrete structures are under the influence of environmental conditions, such as temperature fluctuations, moisture and chloride variations simultaneously. Thus, the moisture transfer in concrete is driven by the moisture gradient as well as the temperature gradient. Similarly, the ionic transfer in concrete is driven by the concentration gradient of the ion as well as the temperature gradient. This paper developed an analytical solution that can be used for the moisture or the chloride transport in concrete considering the effect of temperature gradient. The effect of mass transfer on the thermal conduction was not considered, so the problem is simplified as a one-way coupled problem. The analytical model was validated by using two CASE studies, in which realistic material parameters of concrete were used, the parameters were obtained from experiments in the literature. The comparisons between analytical results and experimental results showed good agreement. It indicated that the present model can successfully characterize the effect of temperature gradient on moisture transfer and the effect of temperature gradient on chloride transport in concrete.

36 MATERIALS SCIENCE↗

Quantifying the anion effect of gas solubility within ionic liquids using the solvation affinity index

The solubility of gas molecules within ionic liquids (ILs) is strongly dictated by the anion effect and the free volume effect, and of these two influences, the anion effect can be challenging to predict. We evaluate a wide range of different gas solutes (O 2 , NH 3 , CH 4 , H 2 S, SO 2 , Ar, H 2 , N 2 , CO 2 ) in different ILs, and we find that the solubility is strongly correlated to one of three different IL properties, which can be directly calculated from the anion electrostatic potential (ESP) surfaces. Thus, the solutes can be grouped into three fundamental types, leading to a general descriptor, the solvation affinity index (SAI), which can identify the affinity between a wide range of gas solutes and IL solvents. The SAI of nine common industrial gases with 47 common anions are generated. Furthermore, this can provide a fast approach for pre-screening IL solvents or even for ILs embedded within porous supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental determination of solubilities of di-calcium ethylenediaminetetraacetic acid hydrate [Ca2C10H12N2O8·7H2O(s)] in NaCl and MgCl2 solutions to high ionic strengths and its Pitzer model: Applications to geological disposal of nuclear waste and other low temperature environments

In this study, solubility measurements on di-calcium ethylenediaminetetraacetic acid [Ca 2 C 10 H 12 N 2 O 8 (s), abbreviated as Ca 2 EDTA(s)] as a function of ionic strength are conducted in NaCl solutions up to I = 5.0 mol•kg –1 and in MgCl 2 solutions up to I = 7.5 mol•kg –1 , at room temperature (22.5 ± 0.5oC).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hormetic effect of ionic liquid 1-ethyl-3-methylimidazolium acetate on bacteria

The biological effect of ionic liquids (ILs) is one of the highly debated topics as they are being contemplated for various industrial applications. 1-ethyl-2-methylimidazolium acetate ([EMIM][Ac]) showed remarkable hormesis on anaerobic Clostridium sp. and aerobic Psueudomonas putida. Bacterial growth was stimulated at up to 2.5 g L -1 and inhibited at > 2.5 g L -1 of ([EMIM][Ac]). The growth of Clostridium sp. and P. putida were higher by 0.4 and 4-fold respectively, in the presense of 0.5 g L -1 of ([EMIM][Ac]). Assessment of the effect of [EMIM][Ac] under different growth conditions showed that the hormesis of [EMIM][Ac] was mediated via regulation of medium pH. Hormetic effect of [EMIM][Ac] was evident only in medium with poor buffering capacity and in the presence of a fermentable substrate as the carbon source. The hormetic effect of [EMIM][Ac] on bacterial growth is most likely associated with the buffering capacity of acetate anion. These observations have implications in ILs toxicity studies and ecological risk assessment.

54 ENVIRONMENTAL SCIENCES↗

Vaporization behavior of tetraoctylphosphonium bis(2-ethylhexyl)phosphate ionic liquid

We determined the equilibrium vapor pressures, p e , of the ionic liquid tetraoctylphosphonium bis(2-ethylhexyl)phosphate ([P 8888 ][DEHP]) over the temperature range 409–495 K using mass loss Knudsen effusion. The p e versus temperature relationship compares well to 1-methyl-3-octylimidazolium bis(trifluoromethylsulfonyl)imide ([C 8 mim][NTf 2 ]) but is lower than that of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C 2 mim][NTf 2 ]) when measured using the same technique. Here, we determined the discrepancies between the p e for [C 8 mim][NTf 2 ] and [C 2 mim][NTf 2 ] with previous studies is discussed. Finally, the enthalpy and entropy of vaporization for all three fluids are estimated from the Clasius-Clapeyron relation.

36 MATERIALS SCIENCE↗

Kinetic study of the hydrogen charging reaction on the graphite e in aqueous solution and in room temperature ionic liquid (RTIL)

Electrochemical impedance spectroscopy and other electrochemical methods were used to study the kinetics of hydrogen entry into porous, isotropic graphite and a single crystal graphite surfaces upon cathodic hydrogen charging and to calculate the hydrogen adsorption efficiencies. This model was first applied to graphite in an aqueous, alkaline solution, then in a room-temperature ionic liquid (RTIL), and, ultimately will be applied to FliNaK molten salt systems in future work. The results demonstrate that our model accurately describes the entry of hydrogen into graphite in harsh environments, which are important for the development of molten salt reactors (MSRs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer electrolytes based on protic ionic liquids with perfluorinated anions for safe lithium-ion batteries

Here, the quest for safe and high-performance polymer electrolytes in lithium-ion batteries (LIBs) has led researchers to explore protic ionic liquids (PILs) as potential candidates to be entrapped in polymer matrices. In this context, we present an investigation into solid polymeric systems based on poly(methyl methacrylate) (PMMA) as a host for PILs, featuring 1,8-diazabicyclo-[5,4,0]-undec-7-ene (DBU) cation paired with three different anions: bis(trifluoromethanesulfonyl)imide (TFSI – ), trifluoromethanesulfonate (TFO – ), and (trifluoromethanesulfonyl-nonafluorobutylsulfonyl)imide (IM14 – ). Additionally, we explore the lithium-doped IM14-gel-like system to broaden our understanding of these intriguing materials. Through comprehensive thermal analysis, solid-state NMR, and diffusion NMR techniques, we delve into the interactions and structural features of these binary and ternary polymeric systems. Our investigation reveals unique dynamics and ion interactions within the PMMA matrix, shedding light on the potential of these materials for advanced energy storage technologies. Particularly, we highlight the distinctive features of DBUH-IM14 and its specific interaction with the polymeric matrix and the lithium ions, underscoring its significance in advancing safer and more efficient energy storage devices.

25 ENERGY STORAGE↗

Atomic and ionic hydrogen flux probe for quantitative in-situ monitoring of hydrogen recycling

A new combination diagnostic as a hydrogen recycling monitor in harsh conditions is proposed. Combining permeation membrane probe with a Langmuir probe provides a possibility to measure both atomic and ionic hydrogen fluxes to plasma facing components. A brief overview of permeation probes is given. The range of measurable H fluxes is from 10 16 to more than 10 20 H m –2 s –1 . Time response of the permeation probe is ~ 0.1–0.5 s. A method to address disadvantages of permeation probes is proposed. This includes an introduction of a preparation chamber for Ar-plasma cleaning of the membrane and absolute calibration with a visible spectroscopy. The hydrogen recombination coefficient, evaluated in such calibration, is k u = 5.9 × 10 –30 m 4 s –1 , which agrees well with previous research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A note on efficiently generating ionic configurations for opacity calculations

When calculating the spectral opacity of hot dense plasmas one often encounters the need to generate a list of detailed ionic configurations of bound states for each ion stage in the plasma. Here we present here a non-recursive algorithm for the efficient construction of such a list of states.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ionic liquid-water mixtures enhance pretreatment and anaerobic digestion of agave bagasse

Agave bagasse (AB), a byproduct of tequila production, is a waste generated in large quantities and an emerging alternative for biofuels production. Nevertheless, the use of lignocellulosic biomass for this purpose requires a pretreatment that maximizes its degradation and utilization. Although there are several pretreatment types, using ionic liquids (IL) has become attractive due to its ability to dissolve the lignocellulosic biomass under mild conditions of time and temperature. As a drawback are the high cost of IL's and their high viscosity; thus mixing them with water is a way to overcome these hindrances. This work aimed to evaluate the effect of pretreatment with three diluted ILs on the A. tequilana bagasse structure and sugars production, as well as the potential of the enzymatic hydrolysate to produce methane in batch mode. The evaluated ILs were: 1-ethyl-3-methylimidazolium acetate [Emim][OAc], choline lysinate [Ch][Lys] and ethanolamine acetate [EOA][OAc]. The results showed that the IL with the best performance was [Ch][Lys], which not only offered the highest yields of sugar production (0.57 ± 0.03 g total sugars / g bagasse) but also, it is possible to use it at 30 % in a mix with water obtaining similar yields as with pure IL. Enzymatic hydrolysis of IL pretreated AB achieved 50.7 kg sugars and 49.3 kg of sugars for 90 %-[Ch][Lys] and 30 %-[Ch][Lys], respectively per 100 kg of untreated biomass. The enzymatic hydrolysate from the 30 %-[Ch][Lys] pretreated AB was able to achieve 0.28 L CH4/g CODfed, demonstrating that both sugar and methane yields are maintained when pure or 30 %-[Ch][Lys] are used for pretreatment, representing a step forward towards process feasibility.

59 BASIC BIOLOGICAL SCIENCES↗