Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Aerodynamic Coefficients from Aeroballistic Range Testing of Deployed- and Stowed-SIAD SFDT Models

This report documents a ballistic-range test campaign conducted in 2012 in order to estimate the aerodynamic stability characteristics of two configurations of the Supersonic Flight Dynamics Test (SFDT) vehicle prior to its initial flight in 2014. The SFDT vehicle was a test bed for demonstrating several new aerodynamic decelerator technologies then being developed under the Low-Density Supersonic Decelerator (LDSD) Project. Of particular interest here is the Supersonic Inflatable Aerodynamic Decelerator (SIAD), an inflatable attached torus used to increase the drag surface area of an entry vehicle during the supersonic portion of the entry trajectory. Two model configurations were tested in the ballistic range: one representing the SFDT vehicle prior to deployment of the SIAD, and the other representing the nominal shape with the SIAD inflated. Both models were fabricated from solid metal, and therefore, the effects of the flexibility of the inflatable decelerator were not considered. The test conditions were chosen to match, as close as possible, the Mach number, Reynolds number, and motion dynamics expected for the SFDT vehicle in flight, both with the SIAD stowed and deployed. For SFDT models with the SIAD stowed, 12 shots were performed covering a Mach number range of 3.2 to 3.7. For models representing the deployed SIAD, 37 shots were performed over a Mach number range of 2.0 to 3.8. Pitch oscillation amplitudes covered a range from 0.7 to 20.6 degrees RMS. Portions of this report (data analysis approach, aerodynamic modeling, and resulting aerodynamic coefficients) were originally published as an internal LDSD Project report [1] in 2012. In addition, this report provides a description of the test design approach, the test facility, and experimental procedures. Estimated non-linear aerodynamic coefficients, including pitch damping, for both model configurations are reported, and the shot-by-shot trajectory measurements, plotted in comparison with calculated trajectories based on the derived non-linear aerodynamic coefficients, are provided as appendices. Since the completion of these tests, two full-scale SFDT flights have been successfully conducted: one in June 2014 [2, 3], and one in June 2015 [3].

Ground Test↗

The SUrvey for Pulsars and Extragalactic Radio Bursts - IV. Discovery and polarimetry of a 12.1-s radio pulsar

We report the discovery of PSR J2251−3711, a radio pulsar with a spin period of 12.1 s, the second longest currently known. Its timing parameters imply a characteristic age of 15 Myr, a surface magnetic field of 1.3 × 10^(13) G, and a spin-down luminosity of 2.9 × 10^(29) erg/s. Its dispersion measure of 12.12(1) pc/cu. cm leads to distance estimates of 0.5 and 1.3 kpc according to the NE2001 and YMW16 Galactic free electron density models, respectively. Some of its single pulses show an uninterrupted 180-deg sweep of the phase-resolved polarization position angle, with an S-shape reminiscent of the rotating vector model prediction. However, the fact that this sweep occurs at different phases from one pulse to another is remarkable and without straightforward explanation. Although PSR J2251−3711 lies in the region of the P − P˙ parameter space occupied by the X-ray isolated neutron stars (XINS), there is no evidence for an X-ray counterpart in our Swift XRT observation; this places a 99 per cent-confidence upper bound on its unabsorbed bolometric thermal luminosity of 1.1 × 10^(31) (d/1 kpc)^2 erg/s for an assumed temperature of 85 eV, where d is the distance to the pulsar. Further observations are needed to determine whether it is a rotation-powered pulsar with a true age of at least several Myr, or a much younger object such as an XINS or a recently cooled magnetar. Extreme specimens like PSR J2251−3711 help bridge populations in the so-called neutron star zoo in an attempt to understand their origins and evolution.

V Morello↗

The Potential for Metamorphic Thermal Pulses to Develop During Compaction-Driven Fluid Flow

Compaction-driven fluid flow below the brittle-ductile transition may be a means of transporting fluids during metamorphism. In particular, when a decompaction weakening mechanism is introduced to account for the rock viscosity reduction due to fluid overpressures, channeling instabilities evolve into high-porosity/permeability fluid conduits that focus mass and energy transfer. In this study, we consider a crustal rheology that accounts simultaneously for upward-increasing viscosity and decompaction weakening to examine the nucleation and evolution of fluid channelization in two dimensions (2-D). The model shows that plume-shaped flow patterns can develop on time scales as short as 104 years, during which the plume tails act as fluid conduits and the plume heads act as fluid dispersion zones near the brittle-ductile transition. Collection of fluids into conduits is accomplished by a basal fluid catchment zone characterized by strong lateral fluid pressure gradients but low porosity/permeability. Relatively narrow ranges of viscous activation energy (~100 kJ mo -1 ) and decompaction weakening factor (~10 -4 ) are constrained if the fluid conduits are of kilometer scale in width. Significant thermal excursions (~65 °C) can be induced if a high flow rate, potentially from rapid intermittent dehydration, is realized within channels. Moreover, if the focused fluids emanate from external anomalously hot sources (e.g., magma intrusion), thermal pulses (>100°C), and steep lateral temperature gradients (>50°C km -1 ) can be generated. Given the focusing efficiency estimated from our 2-D compaction model, simple 3-D modeling further shows that tubular conduits have the potential to cause thermal pulses >200°C within 10 4 years

54 ENVIRONMENTAL SCIENCES↗

Primal interface debonding formulation for finite strain isotropic plasticity

In this work, a framework is developed for modeling ductile damage of nonlinear materials whose plastic deformation is characterized using rate independent classical plasticity. This method relies on the assumption that the free energy can be decomposed into elastic, plastic and damage parts. A thermodynamically consistent method is derived which satisfies the second law of thermodynamics in the Clausius–Duhem inequality form. The dissipation associated with plasticity takes place in the domain only, while damage dissipation is localized to the interface. The method is developed using Variational Multiscale ideas to obtain definitions of the interface fluxes within a primal formulation analogous to the Discontinuous Galerkin method, which ensures weakly vanishing interface gap prior to reaching a damage initiation criterion. The local nonlinear problem to calculate both plastic deformation gradient and damage variable follows an incremental approach similar to classical plasticity return mapping algorithm. This elastoplastic damage formulation is developed for material undergoing finite strain, and it naturally accommodates a trapezoidal traction separation law (TSL) whose shape can be varied to model either ductile interface behavior or brittle interface behavior. The formulation's performance is assessed through modeling a patch test and a compact tension specimen.

42 ENGINEERING↗

Properties of the Lambda(1405) Hyperon Studied at CLAS Using Photoproduction

The internal structure of the Lambda(1405) hyperon has remained an unresolved mystery in hadron physics for decades. Observed as a resonance in sigma pi just below the N-Kbar threshold, it is the first excited Lambda state; yet the nature of this resonance, where it belongs in the hierarchy of hyperons, and some of its basic properties, remain unsettled. In previous experiments, the invariant mass spectrum (lineshape) has been observed to be distorted from a simple Breit-Wigner form, and since the 1960's, this has lead to theoretical speculation on the nature of this resonance and the dynamics involved in forming it. Dalitz was among the first to point out that the strong attraction of the N-Kbar channel near threshold could produce a quasi-bound state that can only decay to the below-threshold Sigma pi mode. The otherwise highly successful constituent quark model has difficulties in assigning the Lambda(1405), since naively the mass is calculated to be almost degenerate with the Lambda(1520). In recent years, advances in chiral unitary models have made definite predictions for the line shape of the Lambda(1405), based on a strong coupling approach, to dynamically generate the Lambda(1405) from constituent mesons and baryons. Furthermore, the chiral unitary model predicts that there are two I = 0 poles for the Lambda(1405), one coupling strongly to the Sigma pi decay mode, and the other a narrower resonance that couples more strongly to N-Kbar. The composite nature of the Lambda(1405) has repercussions, such as to the nature of baryon resonances above 1.9 GeV in mass which may decay to Lambda(1405), and also the topic of kaon condensation in the nuclear medium. Past experiments have shown distortions of the line shape of the Lambda(1405), but had statistics too limited to draw strong conclusions. With the CLAS collaboration at Jefferson Lab, we have studied the Lambda(1405) via photoproduction with unprecedented statistics from a proton target. The large multi-particle acceptance of the CLAS detector allows us to measure and compare the lineshapes and differential cross sections of all three decay modes Sigma^+ pi^?,Sigma0pi0, and sigma? pi+ from near the production threshold up to center-of-mass energies of 2.84 GeV. As predicted in the chiral unitary models, the line shapes and differential cross sections of the Lambda(1405) are indeed quite different for each decay channel. This lends support to the idea that the Lambda(1405) has strong dynamical components that distinguish it from other known resonances. In addition, the cross sections of the nearby Sigma(1385) and Lambda(1520) resonances have also been measured, and comparisons to the Lambda(1405) cross section will be shown. Another basic property of the Lambda(1405) that has previously been experimentally unconfirmed is its spin and parity quantum numbers. Past experiments have not shown a conclusive result for the expected spin and parity of JP= 1/2?. In the CLAS experiment we found a substantial polarization of the photoproduced Lambda(1405), which is measured through the daughter Sigma+, and we determined the parity of the parent Lambda(1405) from how this polarization was transferred. Our spin-parity analysis shows that indeed the assignment of 1/2? is correct.

Moriya, Kei↗

ResStock Measure Documentation: Residential Two-Stage Geothermal Heat Pump (4.0 COP, 20.5 EER) With Envelope Improvements and Advanced Air Sealing

The goal of this work is to develop energy efficiency, demand flexibility, and other retrofit end-use load shapes (electricity, gas, propane, or fuel oil) that cover a majority of the high-impact, market-ready (or nearly market-ready) measures. "Measures" refers to retrofits that can be applied to buildings during modeling. An "end-use savings shape" is the difference in energy consumption between a baseline building and a building with an energy efficiency, demand flexibility, or other retrofit measure applied. It results in a time-series profile that is broken down by end use and fuel (electricity or on-site gas, propane, or fuel oil use) at each time step. ResStock is a highly granular, physics-based, bottom-up model that uses multiple data sources, statistical sampling methods, and advanced building energy simulations to estimate the annual subhourly energy consumption of the residential building stock across the United States. The baseline model intends to represent the U.S. residential building stock as it existed in 2018. Technical documentation for the inputs and assumptions in the baseline building stock model is available in Reyna et al. (2025). Calibration and validation of the baseline model results are available in the final technical report of the End-Use Load Profiles project (Wilson, et al. 2022). This document focuses on a single end-use savings shape measure: Residential Two-Stage Geothermal Heat Pump (GHP) (4.0 COP, 20.5 EER) With Envelope Improvements. This measure combines a two-stage GHP with envelope improvements as a single package. As this package is a combination of two other measures, this document focused on documenting the results associated with this combination of technologies, with individual measure documents for two-stage GHPs and envelope improvements providing the information on the details of these measures. When the two technologies are combined, envelope improvements can modestly reduce energy consumption by a further 10%-15%, but also reduce the required size of the ground heat exchanger and heat pump by approximately 33% on average across all sites. The cost of installing envelope improvements in these homes is likely to be more than paid for by the reduction in equipment and drilling costs in these buildings for the majority of the stock.

15 GEOTHERMAL ENERGY↗

ResStock Measure Documentation: Residential Single-Stage Geothermal Heat Pump (3.8 COP, 18.6 EER)

The goal of this work is to develop energy efficiency, demand flexibility, and other retrofit end-use load shapes (electricity, gas, propane, or fuel oil) that cover a majority of the high-impact, market-ready (or nearly market-ready) measures. "Measures" refers to retrofits that can be applied to buildings during modeling. An "end-use savings shape" is the difference in energy consumption between a baseline building and a building with an energy efficiency, demand flexibility, or other retrofit measure applied. It results in a time-series profile that is broken down by end use and fuel (electricity or on-site gas, propane, or fuel oil use) at each time step. ResStock is a highly granular, physics-based, bottom-up model that uses multiple data sources, statistical sampling methods, and advanced building energy simulations to estimate the annual subhourly energy consumption of the residential building stock across the United States. The baseline model intends to represent the U.S. residential building stock as it existed in 2018. Technical documentation for the inputs and assumptions in the baseline building stock model is available in Reyna et al. (2025). Calibration and validation of the baseline model results are available in the final technical report of the End-Use Load Profiles project (Wilson et al. 2022). This documentation focuses on a single end-use savings shape measure: Residential Single-Stage Geothermal Heat Pump (GHP).?Single-stage GHPs are able to reduce energy consumption by 31% for the entire stock. Additional results provided below detail how savings changes for sections of the housing stock with different base heating fuel and in different climate zones, as well as the savings potential by state for both heating and cooling. Utility bills and electric panel impacts are also shown and discussed.

15 GEOTHERMAL ENERGY↗

TESTING THE NO-HAIR THEOREM WITH OBSERVATIONS IN THE ELECTROMAGNETIC SPECTRUM. II. BLACK HOLE IMAGES

According to the no-hair theorem, all astrophysical black holes are fully described by their masses and spins. This theorem can be tested observationally by measuring (at least) three different multipole moments of the spacetimes of black holes. In this paper, we analyze images of black holes within a framework that allows us to calculate observables in the electromagnetic spectrum as a function of the mass, spin, and, independently, the quadrupole moment of a black hole. We show that a deviation of the quadrupole moment from the expected Kerr value leads to images of black holes that are either prolate or oblate depending on the sign and magnitude of the deviation. In addition, there is a ring-like structure around the black hole shadow with a diameter of {approx}10 black hole masses that is substantially brighter than the image of the underlying accretion flow and that is independent of the astrophysical details of accretion flow models. We show that the shape of this ring depends directly on the mass, spin, and quadrupole moment of the black hole and can be used for an independent measurement of all three parameters. In particular, we demonstrate that this ring is highly circular for a Kerr black hole with a spin a {approx}< 0.9 M, independent of the observer's inclination, but becomes elliptical and asymmetric if the no-hair theorem is violated. Near-future very long baseline interferometric observations of Sgr A* will image this ring and may allow for an observational test of the no-hair theorem.

79 ASTRONOMY AND ASTROPHYSICS↗

The diskmass survey. VIII. On the relationship between disk stability and star formation

We study the relationship between the stability level of late-type galaxy disks and their star-formation activity using integral-field gaseous and stellar kinematic data. Specifically, we compare the two-component (gas+stars) stability parameter from Romeo and Wiegert (Q {sub RW}), incorporating stellar kinematic data for the first time, and the star-formation rate estimated from 21 cm continuum emission. We determine the stability level of each disk probabilistically using a Bayesian analysis of our data and a simple dynamical model. Our method incorporates the shape of the stellar velocity ellipsoid (SVE) and yields robust SVE measurements for over 90% of our sample. Averaging over this subsample, we find a meridional shape of σ{sub z}/σ{sub R}=0.51{sub −0.25}{sup +0.36} for the SVE and, at 1.5 disk scale lengths, a stability parameter of Q {sub RW} = 2.0 ± 0.9. We also find that the disk-averaged star-formation-rate surface density ( Σ-dot {sub e,∗}) is correlated with the disk-averaged gas and stellar mass surface densities (Σ {sub e,} {sub g} and Σ {sub e,} {sub *}) and anti-correlated with Q {sub RW}. We show that an anti-correlation between Σ-dot {sub e,∗} and Q {sub RW} can be predicted using empirical scaling relations, such that this outcome is consistent with well-established statistical properties of star-forming galaxies. Interestingly, Σ-dot {sub e,∗} is not correlated with the gas-only or star-only Toomre parameters, demonstrating the merit of calculating a multi-component stability parameter when comparing to star-formation activity. Finally, our results are consistent with the Ostriker et al. model of self-regulated star-formation, which predicts Σ-dot {sub e,∗}/Σ{sub e,g}∝Σ{sub e,∗}{sup 1/2}. Based on this and other theoretical expectations, we discuss the possibility of a physical link between disk stability level and star-formation rate in light of our empirical results.

79 ASTRONOMY AND ASTROPHYSICS↗

The role of ion and electron-scale turbulence in setting heat and particle transport in the DIII-D ITER baseline scenario

In this work, the heat and particle transport in a DIII-D ITER Baseline Scenario (IBS) discharge has been investigated using both linear and nonlinear gyrokinetic simulations performed with the CGYRO code [J. Candy et al: Journal Comp. Phys. (2016)].These simulations were used to investigate the role that ion-scale ($k_θp_s$ < 1:0) and electron-scale ($k_θp_s$ > 1:0) turbulence play in determining heat and particle transport in the core of conditions believed to directly extrapolate to ITER operation. This investigation spans over nearly half of the plasma minor radius, from ρ = 0:45 - 0:85. To probe the nature of the transport and turbulence in these conditions and to validate the model against experimental fluxes, scans of $a/L_{T_i}$, $a/L_{T_e}$, and $a/L_n$ were performed at all radial locations. Long wavelength turbulence is found to be dominated by ITG modes with strong non-adiabatic electron effects and appears unable to reproduce ion and electron heat fluxes and electron particle fluxes simultaneously at most radial positions when single parameter scans are performed. To investigate the potential role of short wavelength turbulence, a series of electron-scale simulations are performed that indicate that experimentally relevant levels of electron heat flux could arise at sub-ion scales. Quantitative comparison of the simulated fluxes obtained from ion and electron-scale simulations with experimental levels along with the sensitivity of simulations results to changes in inputs is presented. Through extensive sensitivity scans and comparison with multiple transport channels, this work demonstrates a clear need for self-consistent modification of multiple inputs and suggests multi-scale interactions play a significant role at many of the radial locations studied. The results of this analysis help shape our understanding of the model fidelity needed to predict turbulence and transport reactor-relevant conditions and have important implications for the prediction of future fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of transient interference phenomena in colinear laser spectroscopy

Colinear laser spectroscopy of fast atomic beams has been established as one of the main tools to perform precision experiments with atoms containing short-lived nuclei. Although highly sensitive, the spectral resolution of these techniques is typically limited to several MHz. Here, we study the use of transient interference phenomena to potentially improve the experimental resolution. Previous attempts to implement Ramsey-type measurements with fast beams were limited by the lack of understanding of the observed line shapes. Additionally, by using a simple model, we provide a satisfactory description of the previously observed line shapes and propose alternative experimental schemes to improve the resolution in fast ion-beam experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling of contact theories for the manipulation of biological micro/nanoparticles in the form of circular crowned rollers based on the atomic force microscope

This article has dealt with the development and modeling of various contact theories for biological nanoparticles shaped as cylinders and circular crowned rollers for application in the manipulation of different biological micro/nanoparticles based on Atomic Force Microscope. First, the effective contact forces were simulated, and their impact on contact mechanics simulation was investigated. In the next step, the Hertz contact model was simulated and compared for gold and DNA nanoparticles with the three types of spherical, cylindrical, and circular crowned roller type contact geometries. Then by reducing the length of the cylindrical section in the circular crowned roller geometry, the geometry of the body was made to approach that of a sphere, and the results were compared for DNA nanoparticles. To anticipatory validate the developed theories, the results of the cylindrical and the circular crowned roller contacts were compared with the results of the existing spherical contact simulations. Following the development of these contact models for the manipulation of various biological micro/nanoparticles, the cylindrical and the circular crowned roller type contact theories were modeled based on the theories of Lundberg, Dowson, Nikpur, Heoprich, and Hertz for the manipulation of biological micro/nanoparticles. Then, for a more accurate validation, the results obtained from the simulations were compared with those obtained by the finite element method and with the experimental results available in previous articles. The previous research works on the simulation of nanomanipulation have mainly investigated the contact theories used in the manipulation of spherical micro/nanoparticles. However since in real biomanipulation situations, biological micro/nanoparticles of more complex shapes need to be displaced in biological environments, this article therefore has modeled and compared, for the first time, different contact theories for use in the biomanipulation of cylindrical and circular crowned roller shaped micro/nanoparticles. The results of models indicate that the contact model of Hertz achieves the largest amount of deformation for the DNA nanoparticle in cylindrical form and the contact model of Heoprich achieves the largest deformation for the circular crowned roller shaped DNA. Of course, this finding is not always true for the other nanoparticles; and considering the mechanical and environmental characteristics, different results can be obtained. Also, by comparing the deformations of different types of nanoparticles, it was determined that the platelet type nanoparticles display the highest degree of deformation in all the considered models, due to their particular mechanical characteristics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model helicopter rotor high-speed impulsive noise: Measured acoustics and blade pressures

A 1/17-scale research model of the AH-1 series helicopter main rotor was tested. Model-rotor acoustic and simultaneous blade pressure data were recorded at high speeds where full-scale helicopter high-speed impulsive noise levels are known to be dominant. Model-rotor measurements of the peak acoustic pressure levels, waveform shapes, and directively patterns are directly compared with full-scale investigations, using an equivalent in-flight technique. Model acoustic data are shown to scale remarkably well in shape and in amplitude with full-scale results. Model rotor-blade pressures are presented for rotor operating conditions both with and without shock-like discontinuities in the radiated acoustic waveform. Acoustically, both model and full-scale measurements support current evidence that above certain high subsonic advancing-tip Mach numbers, local shock waves that exist on the rotor blades ""delocalize'' and radiate to the acoustic far-field.

Boxwell, D. A.↗

Image-Based Fracture Surface Defect Characterization Methods for Additively Manufactured Ti-6Al-4V Tested in Fatigue

Abstract Fatigue initiation in additively manufactured samples/parts often occurs at processed-induced defects such as lack-of-fusion (LoF), keyhole, or other morphological/microstructural defects that have unique characteristics and measurable qualities. Attempts at identifying and minimizing such defects have utilized optimized processing conditions along with in situ and ex situ characterization that includes metallography and/or X-ray computed tomography (XCT). This paper highlights the benefits of using fracture surface analyses to detect and quantify defects that may not be detected by metallography/XCT due to sectioning and resolution limits. In addition to using manual quantification of fatigue initiating LoF and keyhole defects on fracture surfaces, image-based machine learning using convolutional neural networks such as U-Net were also used to automate the process. Statistical analyses were used to identify the extreme cases of defects that initiated and accelerated fatigue and to model the distribution of defect size and shape characteristics to distinguish the type of defect. Initial results show agreement between trained machine learning models and ground truth data in defect segmentation, and the distributions of defect characteristics are distinguishable to particular process-induced defect types.

Materials Science↗

Poloidal asymmetry in the narrow heat flux feature in the TCV scrape-off layer

Heat flux profiles inferred from a reciprocating probe at the outer midplane of the TCV tokamak during inner wall limited discharges feature radial fall-off lengths that shorten near the last closed flux surface (LCFS) consistent with the so-called narrow feature. The narrow feature is significantly wider on the outboard side compared with that measured on the inner wall by infrared thermography, so it is difficult to discern from the main scrape-off layer feature. After small shifts were applied for alignment, the fraction of the power contained in the narrow feature matches between inboard and outboard measurements, and they scale together with plasma current Ip, suggesting that we are observing the same phenomenon. The outboard side fall-off length within the narrow feature is found to scale closely with the radial correlation length of the edge turbulence as expected if the narrow feature arises due to radially sheared E x B flows. This is found to hold true even for cases where the narrow feature is weak and the fall-off lengths are approaching that of the far scrape-off layer. After the small shifts for alignment, non-zero floating potential profiles were found to match between inboard and outboard sides. A simple model of polarization and diamagnetic cross-field currents is described, which is consistent with the shape of these floating potential profiles. The model predicts that the floating potential at the LCFS must be negative, which supports the argument to shift the upstream measurements. The predicted currents are also consistent with the E x B flows believed to cause the narrow feature. The model is used to predict the magnitude of the floating potential of the LCFS, and the results are found to match measurements for all values of I p . This paper therefore demonstrates consistency between the measurements of the narrow feature on the inboard and outboard sides of the plasma, as well as consistency between the measurements, non-linear turbulence simulations, and analytical models of the narrow feature arising from sheared E x B flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Systematic simulations of modified gravity: symmetron and dilaton models

We study the linear and nonlinear structure formation in the dilaton and symmetron models of modified gravity using a generic parameterisation which describes a large class of scenarios using only a few parameters, such as the coupling between the scalar field and the matter, and the range of the scalar force on very large scales. For this we have modified the N-body simulation code ECOSMOG, which is a variant of RAMSES working in modified gravity scenarios, to perform a set of 110 simulations for different models and parameter values, including the default ΛCDM. These simulations enable us to explore a large portion of the parameter space. We have studied the effects of modified gravity on the matter power spectrum and mass function, and found a rich and interesting phenomenology where the difference with the ΛCDM template cannot be reproduced by a linear analysis even on scales as large as k ∼ 0.05 hMpc{sup −1}. Our results show the full effect of screening on nonlinear structure formation and the associated deviation from ΛCDM. We also investigate how differences in the force mediated by the scalar field in modified gravity models lead to qualitatively different features for the nonlinear power spectrum and the halo mass function, and how varying the individual model parameters changes these observables. The differences are particularly large in the nonlinear power spectra whose shapes for f(R), dilaton and symmetron models vary greatly, and where the characteristic bump around 1 hMpc{sup −1} of f(R) models is preserved for symmetrons, whereas an increase on much smaller scales is particular to symmetrons. No bump is present for dilatons where a flattening of the power spectrum takes place on small scales. These deviations from ΛCDM and the differences between modified gravity models, such as dilatons and symmetrons, could be tested with future surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Gravitational lens models of arcs in clusters

It is now well established that the luminous arcs discovered in clusters of galaxies, in particular those in Abell 370 and Cluster 2244-02, are produced by gravitational lensing of background sources. The arcs are modeled and constraints are placed on the distribution of the mass in the clusters and the shape and size of the sources. The models require, as expected, a large amount of dark matter in the clusters and a mass-to blue-light ratio for the cluster which exceeds 100 solar mass/solar luminosity and could be as high as 1000 solar mass/solar luminosity depending on cosmological parameters and the distribution of the dark matter. Furthermore, it is found that in the case of the arc in A370 the dark matter must have a different distribution than the luminous galaxies, while for the arc in Cl 2244 the dark matter can have a distribution similar to that of the light matter (galaxies) or a separate distribution.

Bergmann, Anton G.↗

A SUZAKU OBSERVATION OF MCG -2-58-22: CONSTRAINING THE GEOMETRY OF THE CIRCUMNUCLEAR MATERIAL

We have analyzed a long-look Suzaku observation of the active galactic nucleus MCG -2-58-22, a type 1.5 Seyfert with very little X-ray absorption in the line of sight and prominent features arising from reflection off circumnuclear material: the Fe line and Compton reflection hump. We place tight constraints on the power-law photon index ({Gamma} = 1.80 {+-} 0.02), the Compton reflection strength (R = 0.69 {+-} 0.05), and the Fe K emission line energy centroid and width (E = 6.40 {+-} 0.02 keV, v{sub FWHM} < 7100 km s{sup -1}). We find no significant evidence either for emission from strongly ionized Fe, or for a strong, relativistically broadened Fe line, indicating that perhaps there is no radiatively efficient accretion disk very close in to the central black hole. In addition, we test a new self-consistent physical model from Murphy and Yaqoob, the 'MYTORUS' model, consisting of a donut-shaped torus of material surrounding the central illuminating source and producing both the Compton hump and the Fe K line emission. From the application of this model we find that the observed spectrum is consistent with a Compton-thick torus of material (column density N{sub H} = 3.6{sup +1.3}{sub -0.8} x 10{sup 24} cm{sup -2}) lying outside of the line of sight to the nucleus, leaving it bare of X-ray absorption in excess of the Galactic column. We calculate that this material is sufficient to produce all of the Fe line flux without the need for any flux contribution from additional Compton-thin circumnuclear material.

79 ASTRONOMY AND ASTROPHYSICS↗