Search NASA⌕ Search

SEARCH · Search NASA

Results for “shuttle effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Space Bioreactor Science Workshop

The first space bioreactor has been designed for microprocessor control, no gaseous headspace, circulation and resupply of culture medium, and a slow mixing in very low shear regimes. Various ground based bioreactors are being used to test reactor vessel design, on-line sensors, effects of shear, nutrient supply, and waste removal from continuous culture of human cells attached to microcarriers. The small (500 ml) bioreactor is being constructed for flight experiments in the Shuttle middeck to verify systems operation under microgravity conditions and to measure the efficiencies of mass transport, gas transfer, oxygen consumption, and control of low shear stress on cells. Applications of microcarrier cultures, development of the first space bioreactor flight system, shear and mixing effects on cells, process control, and methods to monitor cell metabolism and nutrient requirements are among the topics covered.

Morrison, Dennis R.↗

Software reengineering

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

Fridge, Ernest M., III↗

Effects of Experiment Location and Orbiter Attitude on the Residual Acceleration On-Board STS-73 (USML-2)

A knowledge of the quasi-steady acceleration environment on the NASA Space Shuttle Orbiter is of particular importance for materials processing experiments which are limited by slow diffusive processes. The quasi-steady (less than 1 HZ) acceleration environment on STS-73 (USML-2) was measured using the Orbital Acceleration Research Experiment (OARE) accelerometer. One of the facilities flown on USML-2 was the Crystal Growth Furnace (CGF), which was used by several Principal Investigators (PIS) to grow crystals. In this paper the OARE data mapped to the sample melt location within this furnace is presented. The ratio of the axial to radial components of the quasi-steady acceleration at the melt site is presented. Effects of Orbiter attitude on the acceleration data is discussed.

Hakimzadeh, Roshanak↗

Peripheral leukocyte subpopulations and catecholamine levels in astronauts as a function of mission duration

OBJECTIVE: The objective of this study was to determine the effects of spaceflight duration on immune cells and their relationship to catecholamine levels. METHODS: Eleven astronauts who flew aboard five different US Space Shuttle flights ranging in duration from 4 to 16 days were studied before launch and after landing. RESULTS: Consistent with prior studies, spaceflight was associated with a significant increase in the number of circulating white blood cells (p <.01), including neutrophils (p <.01), monocytes (p <.05), CD3+CD4+ T-helper cells (p <.05), and CD19+ B cells (p <.01). In contrast, the number of CD3-CD16+56+ natural killer cells was decreased (p <.01). Plasma norepinephrine levels were increased at landing (p <.01) and were significantly correlated with the number of white blood cells (p <.01), neutrophils (p <.01), monocytes (p <.01), and B cells (p <.01). Astronauts who were in space for approximately 1 week showed a significantly larger increase on landing in plasma norepinephrine (p =.02) and epinephrine (p =.03) levels, as well as number of circulating CD3+CD4+ T-helper cells (p <.05) and CD3+CD8+ T-cytotoxic cells (p <.05) as compared with astronauts in space for approximately 2 weeks. CONCLUSIONS: The data suggest that the stress of spaceflight and landing may lead to a sympathetic nervous system-mediated redistribution of circulating leukocytes, an effect potentially attenuated after longer missions.

Flight Experiment↗

Functional Insights into Human HMG-CoA Lyase from Structures of Acyl-CoA-containing Ternary Complexes

HMG-CoA lyase (HMGCL) is crucial to ketogenesis, and inherited human mutations are potentially lethal. Detailed understanding of the HMGCL reaction mechanism and the molecular basis for correlating human mutations with enzyme deficiency have been limited by the lack of structural information for enzyme liganded to an acyl-CoA substrate or inhibitor. Crystal structures of ternary complexes of WT HMGCL with the competitive inhibitor 3-hydroxyglutaryl-CoA and of the catalytically deficient HMGCL R41M mutant with substrate HMG-CoA have been determined to 2.4 and 2.2 {angstrom}, respectively. Comparison of these {beta}/{alpha}-barrel structures with those of unliganded HMGCL and R41M reveals substantial differences for Mg{sup 2+} coordination and positioning of the flexible loop containing the conserved HMGCL 'signature' sequence. In the R41M-Mg{sup 2+}-substrate ternary complex, loop residue Cys{sup 266} (implicated in active-site function by mechanistic and mutagenesis observations) is more closely juxtaposed to the catalytic site than in the case of unliganded enzyme or the WT enzyme-Mg{sup 2+}-3-hydroxyglutaryl-CoA inhibitor complex. In both ternary complexes, the S-stereoisomer of substrate or inhibitor is specifically bound, in accord with the observed Mg{sup 2+} liganding of both C3 hydroxyl and C5 carboxyl oxygens. In addition to His{sup 233} and His{sup 235} imidazoles, other Mg{sup 2+} ligands are the Asp{sup 42} carboxyl oxygen and an ordered water molecule. This water, positioned between Asp{sup 42} and the C3 hydroxyl of bound substrate/inhibitor, may function as a proton shuttle. The observed interaction of Arg{sup 41} with the acyl-CoA C1 carbonyl oxygen explains the effects of Arg{sup 41} mutation on reaction product enolization and explains why human Arg{sup 41} mutations cause drastic enzyme deficiency.

36 MATERIALS SCIENCE↗

Neutron Fluence Measurements for the UCF HSIS Experiment in ATR

The University of Central Florida (UCF) experiments were irradiated in the Hydraulic Shuttle Irradiation System (HSIS) of the Advanced Test Reactor (ATR) at Idaho national Laboratory (INL) to study the effects of how low neutron fluence on metallic fuels. Four samples were irradiated for 20 days from 2/20/2014 to 3/12/2014 and four additional samples were irradiated for 2 days from 3/17/2014 to 3/19/2014. All eight of the samples included neutron fluence capsules that were previously prepared at PNNL. After irradiation, the neutron fluence monitors were returned to Pacific Northwest National Laboratory (PNNL) for analysis to determine the neutron fluence that was received by each sample.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study of solid rocket motors for a space shuttle booster. Volume 2, book 1: Analysis and design

An analysis of the factors which determined the selection of the solid rocket propellant engines for the space shuttle booster is presented. The 156 inch diameter, parallel burn engine was selected because of its transportability, cost effectiveness, and reliability. Other factors which caused favorable consideration are: (1) recovery and reuse are feasible and offer substantial cost savings, (2) abort can be easily accomplished. and (3) ecological effects are acceptable.

Source record↗

Design guide for low cost standardized payloads, volume 1

Concept point designs of low cost and refurbishable spacecraft, subsystems, and modules revealed payload program savings up to 50 percent. The general relationship of payload approaches to program costs; cost reductions from low cost standardized payloads; cost effective application of payload reliability, MMD, repair, and refurbishment; and implementation of standardization for future spacecraft are discussed. Shuttle interfaces and support equipment for future payloads are also considered

Source record↗

Impact of space shuttle orbiter reentry on mesospheric NOx.

Shuttle orbiter reentry will produce large amounts of nitric oxide (NO) through shock heating at mesospheric altitudes. The effects of this reentry are modeled by considering an impulsive source of NO in time-dependent equations including photochemistry and transport. The model uses an odd-nitrogen approach similar to Strobel's. Parameterized flux boundary conditions are imposed at the mesopause and stratopause and concentrations of the odd nitrogen species (NO, NO2, NO+, N(4S) and N(2D) are found numerically by a finite difference scheme. A localized disturbance can last many hours, depending on the effectiveness of eddy transport. Although the model is one-dimensional, effects of horizontal transport are also included approximately.

Stolarski, R. S.↗

Surface roughness effects on the supersonic aerodynamics of the Rockwell International 089B-139 orbiter

An experimental test program was conducted to determine the effects of vehicle surface roughness on the supersonic aerodynamic characteristics of a 0.01875 scale model of a space shuttle configuration. Surface roughness was simulated by applying a sparse coating of carborundum grit to complete model. Various grit sizes were investigated. The tests were conducted in a wind tunnel at Mach numbers from 1.60 to 4.63. The angle of attack was varied from about -2 deg to as much as 42 deg at 0 deg and + or - 3 deg of sideslip. The angle of sideslip was varied from -8 deg to 8 deg at angles of attack from 0 deg to 40 deg.

Ware, G. M.↗

Payload analysis for space shuttle applications (study 2.2). Volume 3: Payload system operations analysis (task 2.2.1)

The technical and cost analysis that was performed for the payload system operations analysis is presented. The technical analysis consists of the operations for the payload/shuttle and payload/tug, and the spacecraft analysis which includes sortie, automated, and large observatory type payloads. The cost analysis includes the costing tradeoffs of the various payload design concepts and traffic models. The overall objectives of this effort were to identify payload design and operational concepts for the shuttle which will result in low cost design, and to examine the low cost design concepts to identify applicable design guidelines. The operations analysis examined several past and current NASA and DoD satellite programs to establish a shuttle operations model. From this model the analysis examined the payload/shuttle flow and determined facility concepts necessary for effective payload/shuttle ground operations. The study of the payload/tug operations was an examination of the various flight timelines for missions requiring the tug.

Source record↗

Aerodynamic results of a support system interference effects test conducted at NASA/LaRC UPWT using an 0.015-scale model of the configuration 140A/B SSV orbiter (0A20B)

An experimental aerodynamic investigation was conducted to determine the interference effects of a wind tunnel support system. The test article was a 0.015 scale model of the space shuttle orbiter. The primary objective of the test was to determine the extent that aerodynamic simulation of the space shuttle orbiter is affected by base mounting the model, without nozzles, on a straight sting. Two support systems were tested. The characteristics of the support systems are described. Data from the tests are presented in the form of graphs and tables.

Campbell, J. H., II↗

Introduction to the Space Transportation System

A new space transportation concept which is consistent with the need for more cost effective space operations has been developed. The major element of the Space Transportation System (STS) is the Space Shuttle. The rest of the system consists of a propulsive stage which can be carried within the space shuttle to obtain higher energy orbits. The final form of this propulsion stage will be called the Space Tug. A third important element, which is not actually a part of the STS since it has no propulsive capacity, is the Space Laboratory. The major element of the Space Shuttle is an aircraft-like orbiter which contains the crew, the cargo, and the liquid rocket engines in the rear.

Wilson, R. G.↗

Error Analysis of the Shuttle Reaction Control System Propellant Gaging Module

An investigation of the Shuttle Reaction Control System (RCS) propellant gaging module has revealed that the gaging errors due to the combined effects of random instrumentation measurement errors and propellant loading uncertainties are non-linear over the range of the propellant quantity gage (0-100%), with the largest error occurring at the zero point. When the RCS propellant tanks are filled to contain 100% of the maximum usable propellant, the largest gaging error was determined to be 3.9% for the fuel and 5.4% for the oxidizer. When the RCS propellant tanks initially contain 50% of the maximum usable propellant, the largest gaging error increases to 4.0% for the fuel and 5.6% for the oxidizer.

Duhon, D. D.↗

Future payload technology requirements

This paper presents the background and results of a study of future payload technology requirements. The overall objectives of the study were the identification and description of technology items that must be advanced beyond the current state of the art in order for early shuttle-era NASA payloads to meet their currently defined objectives. The purpose was to provide data that will effectively assist the NASA payload technology planning effort. A total of 91 payload technology requirements have been defined in detail with requirements occurring in all disciplines. Included in the description of these technology requirements are the current state-of-the-art, the level of technology advancement required, and the date when the technology will be needed. The highlights of the study are: (1) NASA must provide the major impetus to attain these technology requirements, (2) most of these technologies must be available in 3-4 years, and (3) about half of the technology advancements require a test in space.

Ikerd, H. M.↗

An overview of NASA's space program

During the last several years, the NASA space program entered a new era. With the completion of the Apollo and Skylab programs, NASA places emphasis within its space effort on three main objectives: (1) improving the access to space and the ability to capitalize on this new capability; (2) developing the space and ground systems that will collect and interpret data related to the changing nature of the earth's natural and cultural resources to aid in solving resource and environmental problems facing the entire world; and (3) adding to the storehouse of knowledge through the continued exploration of our solar system and the universe. The paper discusses the importance of the joint USA/USSR Apollo-Soyuz Test Project (ASTP), describes the capability and status of the Space Shuttle, and outlines the important role that these two programs played in extending our ability to make more effective use of this space environment. It also summarizes the capability and the plans for satellites to monitor the earth's natural and cultural resources and to assess environmental quality. The NASA programs for exploring the solar system and the universe is reviewed.

Thome, P. G.↗

Low-Earth orbit satellite servicing economics

Servicing economics of low Earth orbit satellites were studied. The following topics are examined: the economic importance of the repair missions; comparison of mission cost as opposed to satellite modulation transfer functions over a 10 year period; the effect of satellite flight rate change due to changes in satellite failure rate; estimated satellite cost reduction with shuttle operation projects from the 1960's to the 1970's; design objectives of the multimission modular spacecraft; and the economic importance of the repair mission.

Davis, R. F.↗

Current trends and research challenges in land remote sensing

The use of space technology to conduct repetitive global surveys of terrestrial surface conditions is reviewed. The state-of-the-art is determined by the measurement capabilities of orbital sensor systems, the maneuvering and data transmission capabilities of orbital platforms, and the sophistication of the user community. Introduction of the Landsat Thematic Mapper and SPOT sensor systems and operational use of the Space Shuttle are discussed. Research challenges of the 1980's are related to the removal of atmospheric and topographic effects in remotely sensed imagery, the extraction of information from high dimensionality data sets, and the ability to conduct meaningful ground truth surveys to support the analysis and interpretation of remotely sensed data.

Settle, M.↗