Search NASA⌕ Search

SEARCH · Search NASA

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Role of spall in microstructure evolution during laser-shock-driven rapid undercooling and resolidification

We previously reported [Colvin et al., J. Appl. Phys. 101, 084906 (2007)] on the microstructure morphology of pure Bi metal subjected to rapid laser-shock-driven melting and subsequent resolidification upon release of pressure, where the estimated effective undercooling rates were of the order of 10{sup 9}-10{sup 10} K/s. More recently, we repeated these experiments, but with a Bi/Zn alloy (Zn atomic fraction of 2%-4%) instead of elemental Bi and with a change in target design to suppress spall in the Bi/Zn samples. We observed a similar microstructure morphology in the two sets of experiments, with initially columnar grains recrystallizing to larger equiaxed grains. The Bi samples, however, exhibited micron-scale dendrites on the spall surfaces, whereas there were no dendritic structures anywhere in the nonspalled Bi/Zn, even down to the nanometer scale as observed by transmission electron microscopy. We present the simulations and the interferometry data that show that the samples in the two sets of experiments followed nearly identical hydrodynamic and thermodynamic paths apart from the presence of (probably partially liquid) spall in pure Bi. Simulations also show that the spall occurs right at the moving phase front and, hence, the spall itself cuts off the principal direction for latent heat dissipation across the phase boundary. We suggest that it is the liquid spall itself that creates the conditions for dendrite formation.

36 MATERIALS SCIENCE↗

Process of Equiaxed Grains of RE-Al Alloy under Slope Vibration

A new technique using slope vibration casting process during heating and isothermal holding period to prepare Al-7Si-2RE alloy has been studied. The small, near-spherical and non-dendritic microstructure with the semi-solid processing requirements has been obtained. Experiments show that the cooling method, pouring process and the convection of melt caused by slope vibration had significant effects on the formation of near-spherical primary gains. The water-cooled copper mold casting with slope vibration at the temperature near liquidus can obtain Al-7Si-2RE alloy with small homogeneous equiaxed grains, the average grain diameter is 48.3 mum, and the average grain roundness is 1.92.

36 MATERIALS SCIENCE↗

Crystal growth of semiconductor bulk crystals

This course is aimed at showing how to grow bulk crystals by using several methods. The course involves the following points. The growth methods of Bridgman and Czochralski will be introduced. The course also focuses on the mechanism of some processes with consideration of the basic phenomenon. Experimental and numerical examples of the methods will also be introduced.

36 MATERIALS SCIENCE↗

Magnetic properties and microstructure of bulk Nd-Fe-B magnets solidified in magnetic field

The Nd-Fe-B bulk magnets with a slab shape of 0.9 x 4 x 15 mm{sup 3} were prepared by injection casting into a copper mold. The effects of applying a magnetic field during the casting process on the magnetic properties and microstructure of Nd{sub 9.5}Fe{sub 71.5}Ti{sub 2.5}Zr{sub 0.5}Cr{sub 1}B{sub 14.5}C{sub 0.5} alloy have been studied. The results show that the sample cast with magnetic field has a stronger (00L) texture of Nd{sub 2}Fe{sub 14}B phase with the c-axis perpendicular to the slab plane than the sample cast without magnetic field. The intensity of the texture weakens from surface to inner region of the bulk magnets. Applying a magnetic field during the casting process is helpful to refine the grain size effectively. As a result, the magnetic properties are improved from B{sub r} = 5.8 kG, {sub i}H{sub c} = 6.5 kOe, and (BH){sub max} = 5.9 MGOe for thesample cast without magnetic field to B{sub r} = 6.1 kG, {sub i}H{sub c} = 10.3 kOe, and (BH){sub max} = 7.3 MGOe for the sample cast with a 3.7 kOe magnetic field.

36 MATERIALS SCIENCE↗

Effect of Ultrasonic Treatment on the Microstructure of A201 Aluminium Alloy for Thixoforming

It is known that the introduction of high intensity ultrasonic waves into liquid and solidifying metals leads to a non-dendritic and fine grain structure which is the requirement for semi-solid feedstock production. The effect of vibration time on the semi-solid microstructure of the A201 aluminium alloy billets fabricated with the ultrasonic treatment in the liquid state was studied in this paper. It was observed that the application of ultrasound technology can break up and distribute the dendrites which are present in the as-cast alloy. A suitable thixotropic microstructure with relatively rounded and fine globules could be obtained by ultrasonically treating liquid metal at 690 deg. C for a treatment time of 1 minute, cooling to room temperature and then reheating to the semi-solid state. This shows the ultrasonic treatment could be an economic and alternative route to produce A201 semi-solid feedstock for thixoforming.

36 MATERIALS SCIENCE↗

Hard Magnetic, Low Neodymium Nd-Fe-B Melt-Spun Alloys Containing Refractory Metals

The effect of selected refractory metals addition on the structure and magnetic properties was studied for the nanocomposite Nd{sub 9}Fe{sub 77-x}B{sub 14}M{sub x}(M = Ti, Mo, Nb, Mn), Nd{sub 8}Fe{sub 78-x}B{sub 14}M{sub x}(M = Ti, Mo, Nb, Mn) and Nd{sub 7}Fe{sub 79-x}B{sub 14}Ti{sub x} systems. It was found that the addition of 2 and 4 at % of refractory metals leads to a substantial increase of the coercivity and maximum energy product for each of the nanocomposite systems while maintaining the remanence unchanged. The highest properties were obtained for the alloys containing 4-5 at% of the refractory metals. The maximum energy product of 143 kJ/m{sup 3} was achieved for the Nd{sub 8}Fe{sub 74}B{sub 14}Ti{sub 4} alloy.

36 MATERIALS SCIENCE↗

The microstructure of dislocation clusters in industrial directionally solidified multicrystalline silicon

The microstructure of commonly occurring dislocation patterns in industrial directionally solidified multicrystalline silicon has been systematically studied by light microscopy, electron backscatter diffraction, and transmission electron microscopy. The work has been focused on dislocation clusters on wafers near the top of cast blocks. In near {l_brace}111{r_brace} grain surface, dislocation arrays parallel to {l_brace}110{r_brace} plane traces are lying in parallel rows of {l_brace}111{r_brace} planes inclined to the surface, in mainly <112>30 deg. orientation. The dislocation configuration suggests that the microstructure may result from a recovery process. The dislocations formed during crystal growth and cooling have undergone transformations at high temperature in order to achieve low energy configurations for minimization of dislocation and crystal energy.

36 MATERIALS SCIENCE↗

ZnO/(ZnMg)O single quantum wells with high Mg content graded barriers

ZnO/Zn{sub 1-x}Mg{sub x}O single quantum wells (SQWs) were grown by plasma-assisted molecular beam epitaxy on c-plane sapphire substrates. Compositional grading allows the application of optimized growth conditions for the fabrication of Zn{sub 1-x}Mg{sub x}O barriers with high crystalline quality and a maximum Mg content of x = 0.23. High resolution x-ray diffraction reveals partial relaxation of the graded barriers. Due to exciton localization, the SQW emission is found to consist of contributions from donor-bound and free excitons. While for narrow SQWs with well width d{sub W}{<=}2.5nm, the observed increase of the exciton binding energy is caused by quantum confinement, the drop of the photoluminescence emission below the ZnO bulk value found for wide SQWs is attributed to the quantum-confined Stark effect. For a Mg content of x = 0.23, a built-in electric field of 630 kV/cm is extracted, giving rise to a decrease of the exciton binding energy and rapid thermal quenching of the SQW emission characterized by an activation energy of (24 {+-} 4) meV for d{sub W} = 8.3 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ternary eutectic growth of nanostructured thermoelectric Ag-Pb-Te materials

Nanostructured Ag-Pb-Te thermoelectric materials were fabricated by unidirectionally solidifying the ternary Ag-Pb-Te eutectic and near-eutectic alloys using the Bridgeman method. Specially, the Bridgman-grown eutectic alloy exhibited a partially aligned lamellar microstructure, which consisted of Ag{sub 5}Te{sub 3} and Te phases, with additional 200-600 nm size particles of PbTe. The self-assembled interfaces altered the thermal and electronic transport properties in the bulk Ag-Pb-Te eutectic alloy. Presumably due to phonon scattering from the nanoscale microstructure, a low thermal conductivity ({kappa} = 0.3 W/mK) was achieved of the eutectic alloy, leading to a zT peak of 0.41 at 400 K.

36 MATERIALS SCIENCE↗

Interface conditions of two-shot molded parts

The focus of this work is on interfaces of two-shot molded parts. It is well known that e.g. material combination, process parameters and contact area structures show significant effects on the bond strength of multi-component injection molded parts. To get information about the bond strength at various process parameter settings and material combinations a test mold with core back technology was used to produce two-component injection molded tensile test specimens. At the core back process the different materials are injected consecutively, so each component runs through the whole injection molding cycle (two-shot process). Due to this consecutive injection molding processes, a cold interface is generated. This is defined as overmolding of a second melt to a solidified polymer preform. Strong interest lies in the way the interface conditions change during the adhesion formation between the individual components. Hence the interface conditions were investigated by computed tomography and Raman spectroscopy. By analyzing these conditions the understanding of the adhesion development during the multi-component injection molding was improved.

36 MATERIALS SCIENCE↗

Solid-liquid interface free energies of pure bcc metals and B2 phases

The solid-liquid interface (SLI) free energy was determined from molecular dynamics (MD) simulation for several body centered cubic (bcc) metals and B2 metallic compounds (space group: Pm3¯m ; prototype: CsCl). In order to include a bcc metal with a low melting temperature in our study, a semi-empirical potential was developed for Na. Two additional synthetic “Na” potentials were also developed to explore the effect of liquid structure and latent heat on the SLI free energy. The obtained MD data were compared with the empirical Turnbull, Laird, and Ewing relations. All three relations are found to predict the general trend observed in the MD data for bcc metals obtained within the present study. However, only the Laird and Ewing relations are able to predict the trend obtained within the sequence of “Na” potentials. The Laird relation provides the best prediction for our MD data and other MD data for bcc metals taken from the literature. Overall, the Laird relation also agrees well with our B2 data but requires a proportionality constant that is substantially different from the bcc case. It also fails to explain a considerable difference between the SLI free energies of some B2 phases which have nearly the same melting temperature. In contrast, this difference is satisfactorily described by the Ewing relation. Thus, the Ewing relation obtained from the bcc dataset also provides a reasonable description of the B2 data.

36 MATERIALS SCIENCE↗

A synchrotron study of defect and strain inhomogeneity in laser-assisted three-dimensionally-printed Ni-based superalloy

Synchrotron X-ray microdiffraction was employed to investigate the inhomogeneous distribution of defect and residual strain in the transitional region between the dendritic and stray grains in a laser-assisted 3D printed Ni-based superalloy. The dendritic region was found to be under tensile strain transversely to the primary dendrite arm directions. The dendrite edges, where high level of strains and geometrically necessary dislocations were detected, were discerned as low angle grain boundaries. Lastly, high angle grain boundaries were observed in the stray grain region, and the orientation of the strain tensor in this region varied dramatically at the micron scale, in contrast with the more or less homogeneous distribution in the dendritic region.

36 MATERIALS SCIENCE↗

A concept for non-invasive temperature measurement during injection moulding processes

Current models of the injection moulding process insufficiently consider the thermal interactions between melt, solidified material and the mould. A detailed description requires a deep understanding of the underlying processes and a precise observation of the temperature. Because todays measurement concepts do not allow a non-invasive analysis it is necessary to find new measurement techniques for temperature measurements during the manufacturing process. In this work we present the idea of a set up for a tomographic ultrasound measurement of the temperature field inside a plastics melt. The goal is to identify a concept that can be installed on a specialized mould for the injection moulding process. The challenges are discussed and the design of a prototype is shown. Special attention is given to the spatial arrangement of the sensors. Besides the design of a measurement set up a reconstruction strategy for the ultrasound signals is required. We present an approach in which an image processing algorithm can be used to calculate a temperature distribution from the ultrasound scans. We discuss a reconstruction strategy in which the ultrasound signals are converted into a spartial temperature distribution by using pvT curves that are obtained by dilatometer measurements.

42 ENGINEERING↗

High-Pressure Apparatus for Monitoring Solid–Liquid Phase Transitions

This work presents a new technique for observing the solid–liquid phase transformations in complex diesel fuel blends and diesel surrogates under high-pressure conditions intended to simulate those occurring in vehicle fuel injectors. A high-pressure apparatus based on a visual identification of freezing and thawing has been designed and built to monitor phase behavior and determine the crystallization temperature of complex fuels to predict wax precipitation. The proposed methodology was validated using pure substances—n-hexadecane (C16H34), cyclohexane (C6H12), and a binary cyclohexane/n-hexadecane mixture—all of which have been well-characterized previously. The crystallization temperatures of these compounds were measured from atmospheric pressure to 400 MPa for temperatures varying from 290 to 363 K and compared to those reported in the literature. The standard error of the estimated temperatures, based on a given pressure, between the experimental data obtained in this work was compared to data in the literature from Domanska et al. This methodology is being extended to investigate the properties of more complex fuel mixtures.

High-Pressure, phase change, diesel, solidificatio↗

Unveiling the effect of Ni on the formation and structure of Earth’s inner core

Ni is the second most abundant element in the Earth’s core. Yet, its effects on the inner core’s structure and formation process are usually disregarded because of its electronic and size similarity with Fe. Using ab initio molecular dynamics simulations, we find that the bcc phase can spontaneously crystallize in liquid Ni at temperatures above Fe’s melting point at inner core pressures. The melting temperature of Ni is shown to be 700 to 800 K higher than that of Fe at 323 to 360 GPa. hcp, bcc, and liquid phase relations differ for Fe and Ni. Ni can be a bcc stabilizer for Fe at high temperatures and inner core pressures. A small amount of Ni can accelerate Fe’s crystallization at core pressures. These results suggest that Ni may substantially impact the structure and formation process of the solid inner core.

58 GEOSCIENCES↗

Rapid Quenching of Molten Salts as an Approach for the Coordination Characterization of Corrosion Products

A new apparatus was built to rapidly cool molten salts in liquid argon to prevent contamination during quenching and enable new insight into the structure in the liquid state. To test the applicability of the apparatus, several industrially relevant chloride salt compositions were first melted, rapidly solidified, and then characterized. The design proved applicable for the rapid quenching of molten salt. Furthermore, the structure of the apparatus prevented exposure of the rapidly quenched salt to impurities (humidity, oxygen, etc.). X-ray diffraction of salt specimens cooled with and without liquid argon showed differences including a structure further from the expected stoichiometric equilibrium with rapid cooling. Of particular interest is the chemical state of metallic impurities, and this may be probed using electron paramagnetic resonance.

36 MATERIALS SCIENCE↗