Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Comparative study of photocatalytic activity in CdS-TiO{sub 2} thin films prepared by two different techniques

In this study, CdS layer in CdS-TiO{sub 2} bilayer films was fabricated by two different chemical bath deposition techniques: one with an ammonium complex as complexing agent and the other with sodium citrate as a substitute for the ammonium complex. The TiO{sub 2} upper layer was deposited by dc magnetron sputtering technique for both the CdS underlayers. The effect of postdeposition vacuum annealing was studied for both samples. The photocatalytic activity was evaluated by measuring the decomposition of methanol in gas phase under ultraviolet-visible irradiation. The CdS thin films, prepared by both techniques, show a highly oriented hexagonal structure. The optical transmission edge of the CdS thin films deposited by the ammonia-free technique is in lower wavelength than that of the other technique. For both techniques, vacuum annealing extends the absorption edge to higher wavelength, but this effect is more pronounced for the ammonia-content technique. The decomposition efficiency of the as-deposited CdS-TiO{sub 2} thin film prepared by the ammonia-free technique is much higher than the as-deposited CdS-TiO{sub 2} prepared by ammonia-content technique. In case of the ammonia-content technique, high-vacuum annealing improves the photocatalytic activity but it has minimal influence in the other technique. The surface morphology of all the CdS thin films was studied by field emission scanning electron microscopy and atomic force microscopy in order to find out the possible inherent reason that leads to a huge difference in the photocatalytic decomposition activity of CdS-TiO{sub 2} thin films.

36 MATERIALS SCIENCE↗

Preparation and thermal desorption properties of dc sputtered zirconium-hydrogen-helium thin films

We developed a new approach for preparing hydrogen and helium co-containing zirconium films (Zr-H-He) to simulate aging metal tritides. We also studied the effect of hydrogen on helium behavior, in which we applied direct current magnetron sputtering in a mixture of working gases (helium, argon, and hydrogen). The amount and depth profile of helium and hydrogen trapped in the films were determined using the elastic recoil detection analysis. The microstructure and surface morphology of the Zr-H-He films were studied by x-ray diffraction, transmission electron microscopy, and atomic force microscopy. To investigate the effect of hydrogen on the thermal release behavior of helium in the Zr film, thermal desorption spectrometry (TDS) was used, which revealed a similar desorption behavior to aged tritides. TDS experiments showed that the spectra were constituted by low-temperature peaks around 300 deg. C and high temperature peaks above 750 deg. C. Furthermore, the solid-phase {alpha} to {delta} transformation changed the shapes of the high-temperature peaks related to microstates of helium bubbles and caused the peak with a massive helium release shift toward lower temperature obviously.

36 MATERIALS SCIENCE↗

Zn-doped CuAlS{sub 2} transparent p-type conductive thin films deposited by pulsed plasma deposition

CuAl{sub 0.90}Zn{sub 0.10}S{sub 2} thin films were deposited by pulsed plasma deposition. The dependence of structural, surface morphology, electrical, and optical properties of the films on substrate temperature was investigated. X-ray diffraction patterns reveal that the film be amorphous structure. The electrical properties are sensitive to the substrate temperature. A typical sample with conductivity of 50.9 S cm{sup -1}, carrier mobility of 3.13 cm{sup 2} V{sup -1} s{sup -1}, carrier concentration of 1.41x10{sup 19} cm{sup -3}, and average transmission of 74% in visible range of 400-700 nm was obtained. A transparent p-CuAlS{sub 2}:Zn/n-In{sub 2}O{sub 3}:W heterogeneous diode was also fabricated and exhibits rectifying current-voltage characteristics. The ratio of forward current to the reverse current exceeds 80 within the range of applied voltages of -3.0-+3.0 V and the turn-on voltage is approximately 0.5-0.8 V.

36 MATERIALS SCIENCE↗

Reactive magnetron cosputtering of hard and conductive ternary nitride thin films: Ti-Zr-N and Ti-Ta-N

Ternary transition metal nitride thin films, with thickness up to 300 nm, were deposited by dc reactive magnetron cosputtering in Ar-N{sub 2} plasma discharges at 300 deg. C on Si substrates. Two systems were comparatively studied, Ti-Zr-N and Ti-Ta-N, as representative of isostructural and nonisostructural prototypes, with the aim of characterizing their structural, mechanical, and electrical properties. While phase-separated TiN-ZrN and TiN-TaN are the bulk equilibrium states, Ti{sub 1-x}Zr{sub x}N and Ti{sub 1-y}Ta{sub y}N solid solutions with the Na-Cl (B1-type) structure could be stabilized in a large compositional range (up to x=1 and y=0.75, respectively). Substituting Ti atoms by either Zr or Ta atoms led to significant changes in film texture, microstructure, grain size, and surface morphology, as evidenced by x-ray diffraction, x-ray reflectivity, and scanning electron and atomic force microscopies. The ternary Ti{sub 1-y}Ta{sub y}N films exhibited superior mechanical properties to Ti{sub 1-x}Zr{sub x}N films as well as binary compounds, with hardness as high as 42 GPa for y=0.69. All films were metallic, the lowest electrical resistivity {rho}{approx}65 {mu}{Omega} cm being obtained for pure ZrN, while for Ti{sub 1-y}Ta{sub y}N films a minimum was observed at y{approx}0.3. The evolution of the different film properties is discussed based on microstructrural investigations.

36 MATERIALS SCIENCE↗

Effects of gallium doping on properties of a-plane ZnO films on r-plane sapphire substrates by plasma-assisted molecular beam epitaxy

The authors report on the structural, optical, and electrical properties of Ga-doped a-plane (1120) ZnO films grown by plasma-assisted molecular beam epitaxy. Ga doping level was controlled by changing the Ga cell temperatures from 350 to 470 deg. C with an interval of 30 deg. C. With up to Ga cell temperatures of 440 deg. C, single crystalline Ga-doped a-plane ZnO films were grown; however, the sample with a Ga cell temperature of 470 deg. C showed polycrystalline features. The typical striated surface morphology normally observed from undoped ZnO films disappeared with Ga doping. ZnO films doped with Ga cell temperatures up to 440 deg. C did not show a significant change in full width at half maximum (FWHM) values of (1120) x-ray rocking curves by doping. The smallest FWHM values were 0.433 deg. ({phi}=90 deg.) and 0.522 deg. ({phi}=0 deg. ) for the sample with a Ga cell temperature of 350 deg. C. The polycrystalline ZnO film with excessive Ga doping at the Ga cell temperature of 470 deg. C showed significantly increased FWHM values. Hall measurements at room temperature (RT) revealed that electron concentration began to be saturated at the Ga cell temperature of 440 deg. C and electron mobility was drastically reduced at the Ga cell temperature of 470 deg. C. The carrier concentration of Ga-doped ZnO films were controlled from 7.2x10{sup 18} to 3.6x10{sup 20} cm{sup -3}. Anisotropic electrical properties (carrier concentration and Hall mobility) were observed in measurements by the van der Pauw method depending on the direction (c- or m-direction) for the undoped sample but not observed for the doped samples. RT photoluminescence (PL) spectra from the Ga-doped single crystalline ZnO films showed dominant near band edge (NBE) emissions with negligibly deep level emission. The NBE intensity in PL spectra increases with Ga doping.

36 MATERIALS SCIENCE↗

Metal-HfO{sub 2}-Ge capacitor: Its enhanced charge trapping properties with S-treated substrate and atomic-layer-deposited HfO{sub 2} layer

The charge trapping properties of metal-HfO{sub 2}-Ge capacitor as a nonvolatile memory have been investigated with (NH{sub 4}){sub 2}S-treated Ge substrate and atomic-layer-deposited HfO{sub 2} layer. The interfacial layer generated by (NH{sub 4}){sub 2}S-treated Ge substrate reveals a trace of -S- bonding, very sharp interface edges, and smooth surface morphology. The Ru-HfO{sub 2}-Ge capacitor with (NH{sub 4}){sub 2}S-treated Ge substrate shows an enhanced interface state with little frequency dispersion, a lower leakage current, and very reliable properties with the enhanced endurance and retention than Ru-HfO{sub 2}-Ge capacitor with cyclic-cleaned Ge substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative study of ITO and TiN fabricated by low-temperature RF biased sputtering

Radio frequency (RF) biasing induced by a second plasma source at the substrate is applied to low-temperature sputtering processes for indium tin oxide (ITO) and titanium nitride (TiN) thin films. Investigations on crystal structure and surface morphology show that RF-biased substrate plasma processes result in a changed growth regime with different grain sizes and orientations than those produced by processes without a substrate bias. The influence of the RF bias is shown comparatively for reactive RF-sputtered ITO and reactive direct-current-sputtered TiN. The ITO layers exhibit an improved electrical resistivity of 0.5 mΩ cm and an optical absorption coefficient of 0.5 × 10{sup 4 }cm{sup −1} without substrate heating. Room-temperature sputtered TiN layers are deposited that possess a resistivity (0.1 mΩ cm) of 3 orders of magnitude lower than, and a density (5.4 g/cm{sup 3}) up to 45% greater than, those obtained from layers grown using the standard process without a substrate plasma.

36 MATERIALS SCIENCE↗

Pilot-scale electron cyclotron resonance-metal organic chemical vapor deposition system for the preparation of large-area fluorine-doped SnO{sub 2} thin films

The authors report the surface morphology, optical, electrical, thermal and humidity impacts, and electromagnetic interference properties of fluorine-doped tin oxide (SnO{sub 2}:F or “FTO”) thin films on a flexible polyethylene terephthalate (PET) substrate fabricated by a pilot-scale electron cyclotron resonance–metal organic chemical vapor deposition (PS ECR-MOCVD). The characteristics of large area FTO thin films were compared with a commercially available transparent conductive electrode made of tin-doped indium oxide (ITO), prepared with an identical film and PET thickness of 125 nm and 188 μm, respectively. The results revealed that the as-prepared FTO thin films exhibited comparable performances with the incumbent ITO films, including a high optical transmittance of 97% (substrate-subtracted), low electrical resistivity of about 5 × 10{sup −3} Ω cm, improved electrical and optical performances due to the external thermal and humidity impact, and an excellent shielding effectiveness of electromagnetic interference of nearly 2.3 dB. These excellent performances of the FTO thin films were strongly attributed to the design of the PS ECR-MOCVD, which enabled a uniform plasma environment resulting from a proper mixture of electromagnetic profiles and microwave power.

36 MATERIALS SCIENCE↗

Plasma-assisted atomic layer epitaxial growth of aluminum nitride studied with real time grazing angle small angle x-ray scattering

Wide bandgap semiconducting nitrides have found wide-spread application as light emitting and laser diodes and are under investigation for further application in optoelectronics, photovoltaics, and efficient power switching technologies. Alloys of the binary semiconductors allow adjustments of the band gap, an important semiconductor material characteristic, which is 6.2 eV for aluminum nitride (AlN), 3.4 eV for gallium nitride, and 0.7 eV for (InN). Currently, the highest quality III-nitride films are deposited by metalorganic chemical vapor deposition and molecular beam epitaxy. Temperatures of 900 °C and higher are required to deposit high quality AlN. Research into depositing III-nitrides with atomic layer epitaxy (ALEp) is ongoing because it is a fabrication friendly technique allowing lower growth temperatures. Because it is a relatively new technique, there is insufficient understanding of the ALEp growth mechanism which will be essential to development of the process. Here, grazing incidence small angle x-ray scattering is employed to observe the evolving behavior of the surface morphology during growth of AlN by ALEp at temperatures from 360 to 480 °C. Increased temperatures of AlN resulted in lower impurities and relatively fewer features with short range correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma jet based in situ reduction of copper oxide in direct write printing

Printing of nanostructured films with tailored oxidation state and electronic structure can have far reaching applications in several areas including printable electronics, optoelectronics, solar cells, catalytic conversion, and others. Widely used inkjet/aerosol/screen printing techniques require pre- and postprocessing for enhanced adhesion and tailoring of the chemical state of the thin film. Herein, we demonstrate atmospheric pressure plasma jet printing with unique capability to print and tune in situ the electronic properties and surface morphology of nanomaterials. Plasma printing of copper thin films with tailored oxidation state from an inexpensive copper oxide precursor is demonstrated and characterized using x-ray absorption spectroscopy, Raman spectroscopy, and electrical measurements.

42 ENGINEERING↗

Au-free low-temperature ohmic contacts for AlGaN/AlN/GaN heterostructures

We report Au-free, Ti/Al/Ta ohmic contact on the AlGaN/AlN/GaN heterostructure using low annealing temperature is studied in this paper. With SiCl 4 plasma treatment at the recess-etched contact region, a low contact resistance of 0.52 Ω mm and a low sheet resistance of 373 Ω/sq are achieved after annealing at 550 °C for 30 s. The low annealing temperature also leads to better surface morphology. Furthermore, AlGaN/AlN/GaN high-electron-mobility transistors (HEMTs) are fabricated with the 550 °C, 30 s annealed Ti/Al/Ta ohmic contacts, and a maximum transconductance of 123 mS/mm and a maximum drain current of 510 mA/mm are obtained for a gate length of 4 μm. Based on Silvaco's Atlas device simulation framework, a scaled-down device with a short gate length of 1 μm would produce a maximum drain current density of 815 mA/mm. It indicates that the direct current performance of the HEMTs with the ohmic metal proposed in this work is considerably better than that with Au-based ohmic contact.

42 ENGINEERING↗

Synthesis and characterization of electron beam irradiation-induced damage in polycrystalline metal thin films

High-energy physics research, industrial sterilizing, and material processing depend extensively on electron beam accelerators. Exit windows are crucial components of such electron accelerator systems, maintaining vacuum integrity inside the machine while providing mechanical strength, thermal stability, and radiation resistance at the beam-target interface. In this study, thin metallic films of Ni, Ti, Cr, and V were explored for use in electron beam exit windows, and their properties were compared with the properties of their bulk counterparts. Simulation results of metal foils predicted Ti to exhibit less beam power dissipation compared to Ni. However, Ni possesses superior mechanical and structural properties compared to Ti. The performance of these films under electron beam irradiation was examined by depositing thin layers of these films on silicon and metallic substrates using magnetron sputtering and exposing them to e-beam irradiation in a controlled setup. The deposited films were subjected to a dose of approximately 66 kGy at a beam energy of 10 MeV and characterized prior to and postexposure to the beam using field emission scanning electron microscopy, atomic force microscopy, x-ray diffraction (XRD), and nanoindentation. Particular emphasis was given to characteristics like the grain structure, surface morphology, dislocation density, and hardness. XRD patterns revealed irradiation-induced changes in peak intensities, while the crystallinity remained largely unchanged. Nanoindentation results showed that the pristine and irradiated Ti and Ni films were twice as hard when compared to bulk Ti and Ni samples, regardless of the substrate type used (Si or bulk Ti, or Ni). These results emphasize the superior mechanical properties of thin metal films compared to their bulk counterparts. In conclusion, this study advances the optimization of thin film materials for robust and efficient e-beam applications, ensuring improved durability and operational reliability.

AFM↗

From binary to quinary: The rationale and development of GaInAsSbBi for mid- and long-wave infrared sensing applications

Given the added complexity in flux calibration and composition evaluation inherent to quinary alloy growth, what motivates compounding the challenges of III–V-Bi growth with the goal of producing a quinary alloy of GaInAsSbBi for mid- and long-wave infrared sensing applications? Each elemental constituent provides some additional design freedom to achieve the ultimate goal of producing a lattice-matched, bulk random alloy mid-wave infrared III–V material with smooth surface morphology and high optoelectronic quality to enable high performance elevated operating temperatures. Here, this paper reviews the evolution of Bi-containing semiconductor research, focusing on mid- and long-wave infrared materials and highlighting key research findings that motivated the decisions to accept the added complexity in going from binaries like InAs or InSb, to InAsBi, to InAsSbBi, and, finally, to GaInAsSbBi to meet the performance demands of advanced infrared sensing applications.

Webster, Preston T. [Air Force Research Laboratory↗

Hierarchical Multi-Scale Approach To Validation and Uncertainty Quantification of Hyper-Spectral Image Modeling

Validating predictive models and quantifying uncertainties inherent in the modeling process is a critical component of the HARD Solids Venture program [1]. Our current research focuses on validating physics-based models predicting the optical properties of solid materials for arbitrary surface morphologies and characterizing the uncertainties in these models. We employ a systematic and hierarchical approach by designing physical experiments and comparing the experimental results with the outputs of computational predictive models. We illustrate this approach through an example comparing a micro-scale forward model to an idealized solid-material system and then propagating the results through a system model to the sensor level. Our efforts should enhance detection reliability of the hyper-spectral imaging technique and the confidence in model utilization and model outputs by users and stakeholders.

Engel, David W.↗

High absorptivity nanotextured powders for additive manufacturing

The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here, we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in copper, copper-silver, and tungsten enable energy-efficient manufacturing, with printing of pure copper at relative densities up to 92% using laser energy densities as low as 83 joules per cubic millimeter. Simulations show that the enhanced powder absorptivity results from plasmon-enabled light concentration in nanoscale grooves combined with multiple scattering events. The approach taken here demonstrates a general method to enhance the absorptivity and printability of reflective and refractory metal powders by changing the surface morphology of the feedstock without altering its composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain mapping of three-dimensionally structured two-dimensional materials

Strain plays a crucial role in tuning materials’ properties, influencing their optical, electrical, and chemical performances. In two-dimensional (2D) materials, applied stress often induces out-of-plane deformation, resulting in a more intricate three-dimensional (3D) topography, where mapping the strain remains a challenge due to the limitations of conventional characterization techniques. In this work, we introduce BRIGHT (Bragg-Rod Informed, Gradient-based Height-mapping Technique), an integrated method for reconstructing both the topography and planar strain profile of 3D-structured 2D materials using nanobeam four-dimensional scanning transmission electron microscopy (4D-STEM). We apply BRIGHT to a MoS2-MoSe2 transition metal dichalcogenide (TMD) lateral heterojunctions exhibiting built-in strain and out-of-plane ripples and show that varying heterojunction widths lead to distinct surface morphologies and corresponding changes in the planar strain distribution. These results establish a foundation for more effective strain engineering in 2D materials by accounting for out-of-plane structural features, thereby enabling more precise control of strain-dependent properties.

Mireles, Adan [Rice Univ., Houston, TX (United Sta↗

Effect of Laser Irradiation on the PTCR Behavior of Semiconducting Barium Strontium Titanate Ceramics

This paper examines the effect of pulsed laser irradiation on the electrical properties of n-type semiconductor ferroelectric ceramics (based on a (Ba,Sr)TiO{sub 3} solid solution) with a planar contact configuration. The elemental compositions and surface morphologies of the material before and after laser irradiation are compared using scanning electron microscopy data. In the framework of the well-known Heywang model for the positive temperature coefficient of resistance effect, we calculate the resistance of the material as a function of temperature for the paraelectric phase and determine parameters of grain boundaries that ensure good agreement between the experimental data and theoretical curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Characterization of Eu{sup 3+}-Doped Transparent Oxyfluoride Glasses

A process has been proposed for the preparation of oxyfluoride glasses based on the SiO{sub 2}–B{sub 2}O{sub 3}–Bi{sub 2}O{sub 3}–ZnO–CaF{sub 2} system at various ratios of batch components, and transparent glasses have been obtained at a temperature below 1000°C. According to X-ray diffraction data, all of the glasses are X-ray amorphous. The surface morphology of the glasses has been examined and their glass transition temperatures have been determined. Their local structure has been studied by IR spectroscopy and it has been shown that, independent of composition, the glasses contain complex polyborate anions formed by [BO{sub 3}] and [BO{sub 4}] groups. Bismuth is incorporated into the glass network to form Bi–O–Si bonds and [BiO{sub 6}] network-formers.

36 MATERIALS SCIENCE↗