Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

The Solar Wind and Geomagnetic Activity as a Function of Time Relative to Corotating Interaction Regions

Corotating interaction regions during the declining phase of the solar cycle are the cause of recurrent geomagnetic storms and are responsible for the generation of high fluxes of relativistic electrons. These regions are produced by the collision of a high-speed stream of solar wind with a slow-speed stream. The interface between the two streams is easily identified with plasma and field data from a solar wind monitor upstream of the Earth. The properties of the solar wind and interplanetary magnetic field are systematic functions of time relative to the stream interface. Consequently the coupling of the solar wind to the Earth's magnetosphere produces a predictable sequence of events. Because the streams persist for many solar rotations it should be possible to use terrestrial observations of past magnetic activity to predict future activity. Also the high-speed streams are produced by large unipolar magnetic regions on the Sun so that empirical models can be used to predict the velocity profile of a stream expected at the Earth. In either case knowledge of the statistical properties of the solar wind and geomagnetic activity as a function of time relative to a stream interface provides the basis for medium term forecasting of geomagnetic activity. In this report we use lists of stream interfaces identified in solar wind data during the years 1995 and 2004 to develop probability distribution functions for a variety of different variables as a function of time relative to the interface. The results are presented as temporal profiles of the quartiles of the cumulative probability distributions of these variables. We demonstrate that the storms produced by these interaction regions are generally very weak. Despite this the fluxes of relativistic electrons produced during those storms are the highest seen in the solar cycle. We attribute this to the specific sequence of events produced by the organization of the solar wind relative to the stream interfaces. We also show that there are large quantitative differences in various parameters between the two cycles.

McPherron, Robert L.↗

Adjustable and distributionally robust chance-constrained economic dispatch considering wind power uncertainty

This paper proposes an adjustable and distributionally robust chance-constrained (ADRCC) optimal power flow (OPF) model for economic dispatch considering wind power forecasting uncertainty. The proposed ADRCC-OPF model is distributionally robust because the uncertainties of the wind power forecasting are represented only by their first- and second-order moments instead of a specific distribution assumption. The proposed model is adjustable because it is formulated as a second-order cone programming (SOCP) model with an adjustable coefficient. This coefficient can control the robustness of the chance constraints, which may be set up for the Gaussian distribution, symmetrically distributional robustness, or distributionally robust cases considering wind forecasting uncertainty. The conservativeness of the ADRCC-OPF model is analyzed and compared with the actual distribution data of wind forecasting error. The system operators can choose an appropriate adjustable coefficient to tradeoff between the economics and system security.

17 WIND ENERGY↗

On the prediction of critical flutter conditions from subcritical response data and some related wind-tunnel experience

Methods of interpreting response measurements which could be amenable to flight flutter testing procedures were studied analytically and in the wind tunnel. One suggested scheme, which requires evaluation, is an iterative technique in which derivatives obtained from subcritical response data are used to indicate the approach to flutter. A simplification of this procedure was considered by examining the manner in which a single characteristic of the subcritical response behaves in relation to variations of the density or dynamic pressure in the approach to flutter. The use of this single parameter scheme was examined for random excitation as well as for sinusoidal forcing. The feasibility of the method is illustrated by several examples and the relative merits of random and sinusoidal excitation are discussed.

Houbolt, J. C.↗

An experimental and computational study of rotor-vortex interactions

An experimental and computational study has been performed on a close rotor-blade/vortex interaction. Surface pressure data was obtained from a rotor operating close to the tip-vortex from an upstream wing in a wind tunnel. Data was obtained for a wide range of blade-vortex proximities, orientations, and blade-tip Mach numbers (up to the transonic regime). A numerical model of these interactions was constructed using the unsteady, three-dimensional, full-potential rotor code called FPR. The model employed an undistorted full-field representation of the measured vortex. This simple model gave excellent comparisons with the data for a wide range of conditions, including parallel head-on interactions. Computational studies have also been performed on the manner of vortex representation and the influence of vortex-core size.

Caradonna, Francis X.↗

Transonic Navier-Stokes solutions about a complex high-speed accelerator configuration

Three-dimensional transonic viscous flow computations are presented for a generic high-speed accelerator model which includes wing, body, fillets, and a no-flow through engine nacelle. Solutions are obtained from an algorithm for the compressible Navier-Stokes equations which incorporates an upwind-biased, flux-vector-splitting approach along with longitudinally-patched grids. Results are presented for fully turbulent flow assumptions and include correlations with wind tunnel data. A good quantitative agreement for the forebody surface pressure distribution is achieved between computations and the available wind-tunnel measurements at freestream Mach number equal to 0.9. Furthermore, it is demonstrated that the flow is stagnating around the boattail region due to separation from the aft-engine cowl lip.

Ghaffari, Farhad↗

Transonic Navier-Stokes solutions about a generic hypersonic configuration

Three-dimensional transonic viscous flow computations are presented for a generic high-speed accelerator model that includes wing, body, fillets, and a no-flow-through engine nacelle. Solutions are obtained from an algorithm for the compressible Navier-Stokes equations that incorporates an upwind-biased, flux-vector-splitting approach along with longitudinally patched grids. Results are presented for fully turbulent flow assumptions and include correlations with wind-tunnel data. A good quantitative agreement for the forebody surface pressure distribution is achieved between computations and the available wind-tunnel measurements at M∞ = 0.9. Furthermore, it is demonstrated that the flow is stagnating around the boattail region due to separation from the aft-engine cowl lip.

Hypersonic flows↗

Tropospheric Wind Measurements Obtained with the Goddard Lidar Observatory for Winds (GLOW): Validation and Performance

The Goddard Lidar Observatory for Winds (GLOW) is a mobile Doppler lidar system which uses direct detection Doppler lidar techniques to measure wind profiles from the surface into the lower stratosphere. GLOW is intended to be used as a field deployable system for studying atmospheric dynamics and transport and can also serve as a testbed to evaluate candidate technologies developed for use in future spaceborne systems. In September of 2000 GLOW participated in a three week intercomparison experiment at the GroundWinds facility in North Glen, NE. More than 50 hours of line-of-sight wind profile data was obtained in a wide variety of conditions including both day and night operation. Typical clear air lidar wind profiles extended to altitudes of 20 km with a 1 Ian vertical resolution and I minute averaging. A description of the mobile system is presented along with the examples of lidar wind profiles obtained with the Goddard system during the New Hampshire experiment.

Gentry, Bruce M.↗

Tropospheric Wind Measurements Obtained with the Goddard Lidar Observatory for Winds (GLOW): Validation and Performance

The Goddard Lidar Observatory for Winds (GLOW) is a mobile Doppler lidar system which uses direct detection Doppler lidar techniques to measure wind profiles from the surface into the lower stratosphere. GLOW is intended to be used as a field deployable system for studying atmospheric dynamics and transport and can also serve as a testbed to evaluate candidate technologies developed for use in future spaceborne systems. In September of 2000 GLOW participated in a three week intercomparison experiment at the GroundWinds facility in North Glen, NH. More than 50 hours of line-of-sight wind profile data were obtained in a wide variety of conditions including both day and night operation. Typical clear air lidar wind profiles extended to altitudes of 20 kin with a 1 km vertical resolution and 1 minute averaging. A description of the mobile system is presented along with the examples of lidar wind profiles obtained with the Goddard system during the New Hampshire experiment.

Gentry, Bruce M.↗

Transonic Navier-Stokes Solutions about a Complex High-Speed Accelerator Configuration

Three dimensional transonic viscous flow computations are presented for a generic high-speed accelerator model which includes wing, body, filets,and a no-flow through engine nacelle. solutions are obtained from an algorithm for the compressible Navier-Stokes equations which incorporated an upwind-biased, flux-vector-splitting approach along with longitudinally-patched grids. Results are presented for fully turbulent flow assumptions and include correlations with wind tunnel data. A good quantitative agreement for the forebody surface pressure distribution is achieved between computations and the available wind-tunnel measurements at M(sub infinity) = 0.9. Furthermore, it is demonstrated that the flow is stagnating around the boattail region due to separation from the aft-engine cowl lip.

Ghaffari, F.↗

The Evaluation of Cryogenic Force Balance Calibration Methodologies with Respect to Wind Tunnel Results

Independent tests of the NASA Common Research Model (CRM) at NASA's National Transonic Facility (NTF) and the European Transonic Windtunnel (ETW) revealed discrepancies at low operating temperatures and high Reynolds numbers that warranted further investigation. Since each facility used their own force balance for their tunnel entry, one suggestion for the discrepancy was the temperature compensation methodology developed and applied for each balance. This hypothesis is explored through simulation and experimentally. Independent calibrations of NASA's NTF-118A balance at NASA Langley and ETW reveal discrepancies in the thermal compensation of the normal force and pitching moment primary sensitivities with temperature, while the axial force primary sensitivities are in good agreement. The application of the force balance calibrations performed at NASA and ETW to the prior wind tunnel data suggests that the thermal compensation discrepancies are an order of magnitude less than the discrepancies observed between the wind tunnel aerodynamic coefficients.

Burns, Devin E.↗

Moisture, Wind, and Boundary Layer Evolution During a Dryline in IHOP-2002: May 22, 2002

As part of the International H2O Project (MOP-2002), three NASNGSFC lidars acquired high-resolution clear air data of wind, CBL evolution, and water vapor mixing ratio profiles during a dryline event that occurred on 22 May 2002. Together with the anciliary suite of instruments deployed in MOP-2002, these lidar data sets offer a unique look into the mesoscale evolution and convective scale dynamics in and around a dryline.

Demoz, B.↗

NASA Supersonics Research — Leading Toward Quiet Supersonic Flight!!

- Brief history of supersonic flight - Shock waves and sonic booms - Sonic boom pressure signatures and loudness - Tools for studying quiet supersonic flight - CFD (Computational Fluid Dynamics) - Wind tunnels - Flight test - Quesst Mission - X-59 airplane - Mission profile - Flight simulations - Wind tunnel data validations - Video: Supersonic flight research leading to Quesst

sonic boom↗

NASA Supersonics Research and the X-59 — How They Will Benefit You!!

- Brief history of supersonic flight - Shock waves and sonic booms - Sonic boom pressure signatures and loudness - Tools for studying quiet supersonic flight - CFD (Computational Fluid Dynamics) - Wind tunnels - Flight test - Quesst Mission - X-59 airplane - Mission profile - Flight simulations - Wind tunnel data validations - Video: Supersonic flight research leading to Quesst

sonic boom↗

Nasa Supersonics Research and the X-59 —To Enable Future Supersonic Travel!

- Brief history of supersonic flight - Shock waves and sonic booms - Sonic boom pressure signatures and loudness - Tools for studying quiet supersonic flight - CFD (Computational Fluid Dynamics) - Wind tunnels - Flight test - Quesst Mission - X-59 airplane - Mission profile - Flight simulations - Wind tunnel data validations - Video: Supersonic flight research leading to Quesst

sonic boom↗

Comparison of heating rate calculations with experimental data on a modified Shuttle orbiter at Mach 6

Heating-rate calculations from an 'engineering' code and a 'benchmark' Navier-Stokes code are compared with experimental wind tunnel data obtained on a 'modified' 0.0075-scale Shuttle orbiter at a Mach number of 6 and a freestream Reynolds number of 1.9 x 10 to the 6th/m. Comparisons are presented along the windward symmetry plane, in a circumferential direction around the body, and along the wing leading edge at angles of attack of 30 and 40 deg. Both codes provide accurate predictions of the heating rate over most of the body, but because the run time for the engineering code is relatively short, it is an ideal tool for both parametric and design studies.

Hamilton, H. H., II↗

Surface Meteorological Station - HilFlowS - LLNL 52m tall tower - EOP - Processed Data

The WindCube v2 was co-located with Site 300’s 52-m-tall meteorological tower so that measurements below 40 m could also be observed. The meteorological tower has three measurement levels: 10 m, 23 m, and 52 m. Wind speed was measured with a cup anemometer; wind direction with a wind vane. Data are available as 15-minute averages.

17 WIND ENERGY↗

Determination of Comet Halley gas emission characteristics from mass loading of the solar wind

The velocity profile of the solar wind during Giotto's approach to Comet Halley is fitted with the mass loading produced by a simple model of the neutral particle distribution. The model is used to calculate the implanted ion flux at Giotto for any given time and position along the spacecraft trajectory. Comparing the added flux with Giotto's solar wind proton data from the inbound leg outside the bow shock, the ratio of the total mass-loaded ion flux to the solar wind flux at the spacecraft is computed. Hence, using equations given by Galeev et al. (1985) values of the solar wind velocity, u-infinity, far upstream from the comet are inferred. Imposing the condition that u-infinity should be as nearly as possible constant in time, values of gas production rate and the ratio between radial expansion velocity and ionization rate required to fit the model to data are derived. The values obtained are consistent with those derived by more direct methods.

Huddleston, D. E.↗

SOLAR METALLICITY DERIVED FROM IN SITU SOLAR WIND COMPOSITION

We use recently released solar wind compositional data to determine the metallicity of the Sun—the fraction per unit mass that is composed of elements heavier than He. We focus on a present-day solar sample available to us, which is the least fractionated solar wind from coronal holes near the poles of the Sun. Using these data, we derive a metallicity of Z = 0.0196 ± 0.0014, which is significantly larger than recent published values based on photospheric spectroscopy, but consistent with results from helioseismology.

79 ASTRONOMY AND ASTROPHYSICS↗