Search NASA⌕ Search

SEARCH · Search NASA

Results for “'98)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Temporal variations in regional models of the Sargasso Sea from GEOS-3 altimetry

The paper considers temporal variations in regional models of the Sargasso sea from GEOS-3 telemetry. The methods of regional models and the analysis of overlapping passes are utilized, and short-wave maxima and minima in the regional surface models are examined for correlations with surface and remote sensed infrared temperature data supplemented with subsurface expendable bathythermograph data (XBT). The analysis of overlapping passes provide a better picture of instanteneous sea surface height (SSH) variability through wavelengths greater than 30 km. Correlation studies with cyclonic and anticyclonic ocean eddies from infrared imagery and XBT data indicate satisfactory agreement with equivalent SSH features 98% of the time if the time varying factors are allowed for.

Mather, R. S.↗

Emulsion chamber observations of primary cosmic-ray electrons in the energy range 30-1000 GeV

The results of a series of emulsion exposures, beginning in Japan in 1968 and continued in the U.S. since 1975, which have yielded a total balloon-altitude exposure of 98,700 sq m sr s, are presented. The data are discussed in terms of several models of cosmic-ray propagation. Interpreted in terms of the energy-dependent leaky-box model, the spectrum results suggest a galactic electron residence time of 1.0(+2.0, -0.5) x 10 to the 7th yr, which is consistent with results from Be-10 observations. Finally, the possibility that departures from smooth power law behavior in the spectrum due to individual nearby sources will be observable in the energy range above 1 TeV is discussed.

Nishimura, J.↗

Effect of geometry and operating conditions on spur gear system power loss

The results of an analysis of the effects of spur gear size, pitch, width and ratio on total mesh power loss for a wide range of speeds, torques and oil viscosities are presented. The analysis uses simple algebraic expressions to determine gear sliding, rolling and windage losses and also incorporates an approximate ball bearing power loss expression. The analysis shows good agreement with published data. Large diameter and fine-pitched gears had higher peak efficiencies but lower part-load efficiency. Gear efficiencies were generally greater than 98 percent except at very low torque levels. Tare (no-load) losses are generally a significant percentage of the full-load loss except at low speeds.

Anderson, N. E.↗

Uncertainties in predicting turbine blade metal temperatures

An analysis is presented of the effects of the hot-gas and coolant temperatures, the gas-to-blade and blade-to-coolant heat transfer coefficients, and the thermal conductances of a metal wall and a ceramic thermal-barrier coating on the prediction of local turbine-blade surface temperatures. The analysis was applied to the conditions of an advanced turbofan engine and a 1700 K, 40 atm turbine test rig, and to conditions that simulated the engine at 756 K and 15.6 atm. The results showed that with current information on boundary conditions, geometry, heat-transfer coefficients, and material thermal properties, the uncertainty in predicting and verifying local turbine-blade surface temperatures in an average engine is 98 kelvins or 7.6% of the reference metal absolute temperature for uncoated blades, and 62 kelvins or 5.7% for ceramic-thermal-barrier-coated blades.

Stepka, F. S.↗

The possible role of metal ions and clays in prebiotic chemistry

Eight homoionic bentonites were prepared using alkali, alkaline earth, and transition metal ions as counterions. The interaction of the clays with 5'-AMP was studied and it was found that the alkali metal-substituted clays did not remove any nucleotide from dilute solution, and that zinc-bentonite adsorbed the most (98%). In addition, study of the interaction of seven other nucleotides with zinc-bentonite showed that the purine nucleotides were more strongly absorbed than the pyrimidine nucleotides. Langmuir isotherms were obtained for these systems and the adsorption data were explained by the adsorption coefficient and the accessibility of metal for binding.

Lawless, J. G.↗

Solar Hot Water for Motor Inn--Texas City, Texas

Final report describes solar domestic-hot-water heater installation at LaQuinta Motor Inn, Texas City, Texas which furnished 63% of total hot-water load of new 98-unit inn. Report presents a description of system, drawings and photographs of collectors, operations and maintenance instructions, manufacturers' specifications for pumps, and an engineer's report on performance.

Source record↗

A study of trends and techniques for space base electronics

Furnaces and photolithography related equipment were applied to experiments on double layer metal. The double layer metal activity emphasized wet chemistry techniques. By incorporating the following techniques: (1) ultrasonic etching of the vias; (2) premetal clean using a modified buffered hydrogen fluoride; (3) phosphorus doped vapor; and (4) extended sintering, yields of 98 percent were obtained using the standard test pattern. The two dimensional modeling problems have stemmed from, alternately, instability and too much computation time to achieve convergence.

Trotter, J. D.↗

Solar domestic hot water system installed at Texas City, Texas

This is the final technical report of the solar energy system located at LaQuinta Motor Inn, Texas City, Texas. The system was designed to supply 63 percent of the total hot water load for a new 98 unit motor inn. The solar energy system consists of a 2100 square feet Raypack liquid flat plate collector subsystem and a 2500 gallon storage subsystem circulating hot water producing 3.67 x 10 to the 8th power Btu/year. Abstracts from the site files, specification references, drawings, installation, operation, and maintenance instructions are included.

Source record↗

Li/SO2 cell performance

The development of a Li/SO2 cell exhibiting intermittent storage capability at 98 C and instantaneous voltage response is discussed. Results of short circuit, cell puncture, and forced discharge testing are presented along with elevated temperature storage and temperature cycling responses.

Cloyd, J. S.↗

An evaluation of satellite data for estimating the area of small forestland in the southern lower peninsula of Michigan

A winter black and white band 5, a winter color, a fall color, and a diazo color composite of the fall scene were used to assess the use and potential of LANDSAT images for mapping and estimating acreage of small scattered forest tracts in Barry County, Michigan. Forests as small as 2.5 acres were mapped from each LANDSAT data source. The maps for each image were compared with an available forest-type map. Mapping errors detected were categorized as boundary and identification errors. The most frequently misclassified areas were agriculture lands, treed-bogs, brushlands and lowland and mixed hardwood stands. Stocking level affected interpretation more than stand size. The overall level of the interpretation performance was expressed through the estimation of classification, interpretation, and mapping accuracies. These accuracies ranged from 74 between 74% and 98%. Considering errors, accuracy, and cost, winter color imagery is the best LANDSAT alternative for mapping small forest tracts. However, since the availability of cloud-free winter images of the study area is significantly lower than images for other seasons, a diazo enhanced image of a fall scene is recommended as the best next best alternative.

Karteris, M. A.↗

Preparation and characterization of electrodes for the NASA Redox storage system

Electrodes for the Redox energy storage system based on iron and chromium chloride reactants is discussed. The physical properties of several lots of felt were determined. Procedures were developed for evaluating electrode performance in lab scale cells. Experimental procedures for evaluating electrodes by cyclic voltammetry are described which minimize the IR losses due to the high internal resistance in the felt (distributed resistance). Methods to prepare electrodes which reduced the coevolution of hydrogen at the chromium electrode and eleminate the drop in voltage on discharge occasionally seen with previous electrodes were discussed. Single cells of 0.3329 ft area with improved membranes and electrodes are operating at over 80% voltage efficiency and coulombic efficiencies of over 98% at current densities of 16 to 20 amp % ft.

Reid, M. A.↗

Trends and Techniques for Space Base Electronics

Simulations of various phosphorus and boron diffusions in SOS were completed and a sputtering system, furnaces, and photolithography related equipment were set up. Double layer metal experiments initially utilized wet chemistry techniques. By incorporating ultrasonic etching of the vias, premetal cleaning a modified buffered HF, phosphorus doped vapox, and extended sintering, yields of 98% were obtained using the standard test pattern. A two dimensional modeling program was written for simulating short channel MOSFETs with nonuniform substrate doping. A key simplifying assumption used is that the majority carriers can be represented by a sheet charge at the silicon dioxide silicon interface. Although the program is incomplete, the two dimensional Poisson equation for the potential distribution was achieved. The status of other Z-D MOSFET simulation programs is summarized.

Trotter, J. D.↗

Analysis of SETI data collected in the parasitic mode

A system for performing SETI observations continuously as part of non-SETI observations at a radio observatory is presented, and the analysis of results obtained by the parasitic system is discussed. The system, designated SERENDIP, is a real-time microprocessor-controlled spectrum analyzer with algorithms for performing statistical operations and recording those spectra with characteristics presumed to be typical of intelligent rather than astrophysical origin. Programs also exist for the post-acquisition analysis of signal autocorrelation, power spectra, time behavior and positional coordinates, and for a generalized cluster analysis to detect clusters of signal detections. In a recent run of 35 days, the SERENDIP system detected 4000 narrowband spectra exceeding a preset threshold, of which 98% were determined to be of instrumental origin. The remaining class of detections is also believed to be instrumental, although not as well organized as the first signals, and means are currently being sought for eliminating them.

Bowyer, S.↗

Single mode glass fiber welding

The electric-arc welding of commercially available single-mode optical fiber has been demonstrated. A mean transmission of 92% and a maximum transmission of 98% are reported for welds of fiber waveguide of 4.5 microns core diameter.

Nelson, M. D.↗

Self-acting geometry for noncontact seals

Two hydrodynamic self-acting seal designs for a LOX turbopump were analyzed in order to predict performance. A radial face seal-to-seal LOX at 310 N/sq cm and 32,000 rpm (130 m/s) was analyzed for pressure differentials of 172 to 448 N/sq cm and speeds from 98 to 147 m/s. A segmented circumferential seal-to-seal helium at 34.5 or 69 N/sq cm and 157 m/s was analyzed for pressures of 35 to 86 N/sq cm (10 N/sq cm ambient) and speeds from 94 to 189 m/s. Test results confirmed noncontact operation near the design speed and pressure, and relatively good qualitative agreement between test and analysis. The face seal was found to operate with mostly liquid in the pads and mostly gas across the dam.

Allen, G. P.↗

The infrared spectrum of Rhea

The reflectance spectrum of the leading side of the Saturnian satellite Rhea in the 0.65 to 2.5 micron range is reported and used to quantify the amount of water and other materials present on the surface. Data were obtained with 1.5% spectral resolution and 3 to 5% precision by the 3.0-m Infrared Telescope Facility at Mauna Kea Observatory with a continuously scanning circular variable filter spectrometer. Water ice absorptions previously identified at 2.02, 1.65 and 1.55 microns are confirmed, and additional absorptions at 1.25 and probably 1.04 microns are identified. The spectrum of Rhea is noted to be very similar to that of the leading side of Ganymede in the 0.6 to 2.5 micron region and to laboratory spectra of water frost on ice blocks rather than an optically thick frost. Results indicate that the leading side of Rhea is at least 90 wt % water ice, and may be as much as 98 wt %. Of the remaining material, neither clathrates nor minerals is excluded.

Clark, R. N.↗

Optically pumped laser lines of Na2 pumped by Kr/+/ /6471 A/ and HeNe /6328 A/ lasers - Identification of old lines and prediction of possible new lines

The laser emission lines of a sodium dimer laser pumped by Kr(+) and HeNe lasers at wavelengths of 6471 and 6328 A, respectively, are identified. The Na2 fluorescence was excited in a crossed heat pipe oven at a sodium pressure of about 1 torr, and recorded spectra were compared with transition probability calculations. For the 6471-A pump, three series excited by absorption through the transitions v-prime = 13, J-prime = 35 - v-double prime = 4, J-double prime = 34; v-prime = 13, J-prime = 83 - v-double-prime = 2, J-double prime = 84 and v-prime = 20, J-prime = 98 - v-double prime = 6, J-double prime = 99 are observed in the region 6100-8350 A. At 6328 A, series excited through the transitions v-prime = 14, J-prime = 45 - v-double prime = 2, J-double prime = 46; v-prime = 16, J-prime = 17 - v-double prime = 4, J-double prime = 18; v-prime = 22, J-prime = 86 - v-double prime = 6, J-double prime = 85 and v-prime = 25, J-prime = 87 - v-double prime = 8, J-double prime = 86. Most of the previously observed optically pumped lines are found to correspond to the three level laser system. Additional wavelengths expected to undergo lasing under slightly improved conditions are also identified.

Verma, K. K.↗

Solar Hot-Air System --Memphis, Tennessee

Solar collectors using air as collection medium provide space heating for four-building office complex in Memphis. 98 page report furnishes details on installation, including: description of system; system startup and acceptance-test results; technical data on collector; installation manuals for collectors, air handler and heat-storage unit.

Source record↗