Search NASA⌕ Search

SEARCH · Search NASA

Results for “['Monte”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Monte Carlo simulation of shielding designs for a cabinet form factor preclinical MV–energy photon FLASH radiotherapy system

Purpose: A preclinical MV-energy photon FLASH radiotherapy system is being designed at Stanford and SLAC National Accelerator Laboratory. Because of the higher energy and dose rate compared to conventional kV-energy photon laboratory-scale irradiators, adequate shielding in a stand-alone cabinet form factor is more challenging to achieve. We present a Monte Carlo simulation of multilayered shielding for a compact self-shielding system without the need for a radiation therapy vault. Methods: A multilayered shielding approach using multiple alternating layers of high-Z and low-Z materials is applied to the self-shielded cabinet to effectively mitigate the secondary radiation produced and to allow the device to be housed in a Controlled Radiation Area outside of a radiation vault. The multilayered shielding approach takes advantage of the properties of high-Z and low-Z radiation shielding materials such as density, cross-section, atomic number of the shielding elements, and products of radiation interactions within each layer. The Monte Carlo radiation transport code, FLUKA, is used to simulate the total effective dose produced by the operation. Results: The multilayered shielding designs proposed and simulated produced effective dose rates significantly lower than monolayer designs with the same total material thickness at the regulatory boundary; this is accomplished through the manipulation of the locations where secondary radiation is produced and reactions due to material properties such as neutron back reflection in hydrogen. Borated polyethylene at 5 wt% significantly increased the shielding performance as compared to regular polyethylene, with the magnitude of the reduction depending upon the order of the shielding material. Conclusions: The multilayered shielding provides a path for shielding preclinical FLASH systems that deliver MV-energy bremsstrahlung photons. Furthermore, this approach promises to be more efficient with respect to the shielding material mass and space claim as compared to shielded vaults typically required for clinical radiation therapy with MV photons.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

A parallel evolutionary multiple-try metropolis Markov chain Monte Carlo algorithm for sampling spatial partitions

We develop an Evolutionary Markov Chain Monte Carlo (EMCMC) algorithm for sampling spatial partitions that lie within a large, complex, and constrained spatial state space. Our algorithm combines the advantages of evolutionary algorithms (EAs) as optimization heuristics for state space traversal and the theoretical convergence properties of Markov Chain Monte Carlo algorithms for sampling from unknown distributions. Local optimality information that is identified via a directed search by our optimization heuristic is used to adaptively update a Markov chain in a promising direction within the framework of a Multiple-Try Metropolis Markov Chain model that incorporates a generalized Metropolis-Hastings ratio. We further expand the reach of our EMCMC algorithm by harnessing the computational power afforded by massively parallel computing architecture through the integration of a parallel EA framework that guides Markov chains running in parallel.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Gradient-informed Hamiltonian Monte Carlo for multicomponent CALPHAD model optimization and uncertainty quantification

CALPHAD model parameter optimization is inherently challenging due to non-smooth objective functions, high-dimensional parameter spaces, and the need for uncertainty quantification (UQ). Traditional weighted nonlinear least squares approaches are computationally efficient but local, whereas black-box global optimizers and ensemble Markov Chain Monte Carlo (MCMC) methods provide broader exploration at substantial computational cost. The objective of this work is to combine the global exploration capability of gradient-informed Hamiltonian Monte Carlo – specifically the No-U-Turn Sampler (NUTS) – with local deterministic refinement using BFGS to efficiently optimize multicomponent CALPHAD models with minimal manual intervention. Analytic gradients are computed via the Jansson derivative framework. The methodology is demonstrated on the Cr—Fe binary system and extended to the Cr—Fe—Ni ternary system with 32 degrees of freedom. For Cr—Fe, NUTS achieves comparable or superior optimality relative to ensemble MCMC while requiring over an order-of-magnitude fewer likelihood evaluations. Parameter uncertainties are quantified through NUTS sampling and propagated to thermodynamic observables using local expansion, demonstrating a novel modular approach that combines binary and ternary parameter subsets without requiring global relaxation. These results establish gradient-informed exploration as a scalable strategy for multicomponent CALPHAD optimization and provide a practical route towards efficient higher-order database development with quantified uncertainty.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Monte Carlo Simulations of the Water Draining Experiment of Giacint Critical Assembly

The MCNP6 computer program has been successfully extended to simulate reactor dynamics problems with moving parts of the geometries. Different from the dynamic method developed in other Monte Carlo codes, a movement scheme has been developed to account for the geometrical parts motion during the particle random walk. The MCNP6 computer program has been used to simulate two transient experiments of the Giacint critical assembly. The MCNP6 calculated total neutron flux was compared with that from the Serpent simulation. An excellent agreement was obtained between the results of the two Monte Caro computer programs. The MCNP6 calculated total neutron flux was also compared with the two measured transients. The MCNP6 results predicted a faster transient than the experimental data. The MCNP6 transient simulation was improved with an adjusted geometrical model which shifts the fuel rods slightly to match the measured reactivity worth due to the drained water. (c) 2021 Elsevier Ltd. All rights reserved.

MCNP, Moving Geometries, Monte Carlo Reactor Trans↗
DOE OSTI2021

Validation of the TOPAS Monte Carlo toolkit for HDR brachytherapy simulations

The goal of this work is to validate the user-friendly Geant4-based Monte Carlo toolkit TOol for PArticle Simulation (TOPAS) for brachytherapy applications. Brachytherapy simulations performed with TOPAS were systematically compared with published TG-186 reference data. The photon emission energy spectrum, the air-kerma strength, and the dose-rate constant of the model-based dose calculation algorithm (MBDCA)-WG generic Ir-192 source were extracted. For dose calculations, a track-length estimator was implemented. Additionally, the four Joint AAPM/ESTRO/ABG MBDCA-WG test cases were evaluated through histograms of the local and global dose difference volumes. A prostate, a palliative lung, and a breast case were simulated. For each case, the dose ratio map, the histogram of the global dose difference volume, and cumulative dose-volume histograms were calculated. The air-kerma strength was (9.772 ± 0.001) × 10 -8 U Bq -1 (within 0.3% of the reference value). The dose-rate constant was 1.1107 ± 0.0005 cGy h -1 U -1 (within 0.01% of the reference value). For all cases, at least 96.9% of voxels had a local dose difference within [-1%, 1%] and at least 99.9% of voxels had a global dose difference within [-0.1%, 0.1%]. The implemented track-length estimator scorer was more efficient than the default analog dose scorer by a factor of 237. For all clinical cases, at least 97.5% of voxels had a global dose difference within [-1%, 1%]. Dose-volume histograms were consistent with the reference data. TOPAS was validated for high-dose-rate brachytherapy simulations following the TG-186 recommended approach for MBDCAs. Built on top of Geant4, TOPAS provides broad access to a state-of-the-art Monte Carlo code for brachytherapy simulations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Weighted nodal domain averages of eigenstates for quantum Monte Carlo and beyond

In this report we study the nodal properties of many-body eigenstates of stationary Schrödinger equation that affect the accuracy of real-space quantum Monte Carlo calculations. In particular, we introduce weighted nodal domain averages that provide a new probe of nodal surfaces beyond the usual expectations. Particular choices for the weight function reveal, for example, that the difference between two arbitrary fermionic eigenvalues is given by the nodal hypersurface integrals normalized by overlaps with the bosonic ground state of the given Hamiltonian. Noninteracting and fully interacting Be atom with corresponding almost exact and approximate wave functions are used to illustrate several aspects of these concepts. Variational formulations that employ different weights are proposed for prospective improvement of nodes in variational and fixed-node diffusion Monte Carlo calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Kinetic Monte Carlo simulations of structural evolution during anneal of additively manufactured materials

Our experiments indicated that upon a post-processing anneal, an additively manufactured 316L stainless steel exhibits cubic grains rather than the conventional equiaxed grains. In this work, we have used kinetic Monte Carlo simulations to explore the origin of these cubic grains. First, we implemented a new kinetic Monte Carlo model in parallel code SPPARKS to simulate grain growth and recrystallization under a residual energy distribution. Our model incorporates physical properties and real-time, as opposed to generic properties and relative time. We further validated that our SPPARKS simulations reproduced the expected kinetic behavior of single-grain evolution. We then used the validated approach to simulate the anneal of an additively manufactured material under the same conditions used in our experiments. We found that the cubic grains can origin from a periodically varying residual energy that may be present in additively manufactured materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Monte Carlo simulation of order-disorder transition in refractory high entropy alloys: A data-driven approach

High entropy alloys (HEAs) are a series of novel materials that demonstrate many exceptional mechanical properties. To understand the origin of these attractive properties, it is important to investigate the thermodynamics and elucidate the evolution of various chemical phases. In this work, we introduce a machine learning approach to construct the effective Hamiltonian and study the thermodynamics of HEAs through canonical Monte Carlo simulation. The main characteristic of our method is to use pairwise interactions between atoms as the machine learning features and systematically improve the representativeness of the dataset using active learning from the Monte Carlo samples. We find this method produces highly robust and accurate effective Hamiltonians that give less than 0.1 mRy test error for all the three refractory HEAs: MoNbTaW, MoNbTaVW, and MoNbTaTiW. Using replica exchange to speed up the MC simulation, we calculated the specific heats and short-range order parameters in a wide range of temperatures. For all the studied materials, we find there are two major order-disorder transitions occurring respectively at T 1 and T 2 , where T 1 is near room temperature but T 2 is much higher. Further, we demonstrate that the transition at T 1 is caused by W and Nb while the one at T 2 is caused by the other elements. By comparing with experiments, the results demonstrate that the order-disorder transitions have a profound impact on the strength and ductility of HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multilevel Monte Carlo methods for the Grad-Shafranov free boundary problem

The equilibrium configuration of a plasma in an axially symmetric reactor is described mathematically by a free boundary problem associated with the celebrated Grad-Shafranov equation. The presence of uncertainty in the model parameters introduces the need to quantify the variability in the predictions. This is often done by computing a large number of model solutions on a computational grid for an ensemble of parameter values and then obtaining estimates for the statistical properties of solutions. In this study, we explore the savings that can be obtained using multilevel Monte Carlo methods, which reduce costs by performing the bulk of the computations on a sequence of spatial grids that are coarser than the one that would typically be used for a simple Monte Carlo simulation. We examine this approach using both a set of uniformly refined grids and a set of adaptively refined grids guided by a discrete error estimator. Numerical experiments show that multilevel methods dramatically reduce the cost of simulation, with cost reductions typically on the order of 60 or more and possibly as large as 200. Furthermore, adaptive griding results in more accurate computation of geometric quantities such as x-points associated with the model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Combined density functional theory/kinetic Monte Carlo investigation of surface morphology during cycling of Li-Cu electrodes

In this work, we employed a combined density functional theory and kinetic Monte Carlo approach in order to investigate the nanoscale behavior of lithium stripping and plating on lithium-copper nanoalloys. Density functional theory calculations were used to develop an atom-by-atom understanding of the nucleation behavior of lithium on copper surfaces with different surface morphologies. We found that nanometric pits resulted in significantly more favorable lithium deposition when compared to pristine or lightly-defective Cu surfaces, which is in agreement with previous experimental studies. We then used density functional theory and constrained ab initio molecular dynamics to develop interaction and reaction parameters for a larger-scale kinetic Monte Carlo model in order to provide insight into the stripping and plating behavior of nanostructured Li-Cu nanoalloy anodes. Substantial losses in capacity and strong indications of morphological change were observed for a wide range of Cu:Li ratios over 100 cycles. We observed a complex relationship between the nanoparticle composition and the properties of the formed solid-electrolyte interphase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A hybrid Monte Carlo, discontinuous Galerkin method for linear kinetic transport equations

Here we present a hybrid method for time-dependent particle transport problems that combines Monte Carlo (MC) estimation with deterministic solutions based on discrete ordinates. For spatial discretizations, the MC algorithm computes a piecewise constant solution and the discrete ordinates use bilinear discontinuous finite elements. From the hybridization of the problem, the resulting problem solved by Monte Carlo is scattering free, resulting in a simple, efficient solution procedure. Between time steps, we use a projection approach to “relabel” collided particles as uncollided particles. In conclusion, from a series of standard 2-D Cartesian test problems we observe that our hybrid method has improved accuracy and reduction in computational complexity of approximately an order of magnitude relative to standard discrete ordinates solutions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

A hybrid Monte Carlo-deterministic second moment method with efficient variance reduction

In this work, we present a hybrid method that combines Monte Carlo with deterministic finite element methods to solve a linear Boltzmann transport equation. Our hybrid method runs orders of magnitude faster than Monte Carlo, without sacrificing accuracy, for a proxy problem from radiative transfer that contains both optically-thick and optically-thin material. We believe that this is the first demonstration of a hybrid Second Moment Method in more than one spatial dimension, the first to consider more than one material, and the first to use variance reduction. Our variance reduction approach arises from an asymptotic analysis in which we show that the magnitude of the scattering source grows without bound. We transform the problem to compute the deviation of the radiation intensity from isotropy. The magnitude of the source in the transformed problem is bounded, and the quality of the hybrid method solution is dramatically improved by a substantial reduction in the variance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Prediction and uncertainty quantification of shale well performance using multifidelity Monte Carlo

Uncertainty quantification is an integral component of reservoir management, especially considering the inherent uncertainty in subsurface systems. While a standard practice to estimate the uncertainty, Monte Carlo (MC) simulation is computationally intense when the sampling population comprises high-fidelity simulations. Alternatively, the Multi-fidelity Monte Carlo (MFMC) simulation overcomes this computational intensity by integrating low- and high-fidelity simulations. Our goal is to minimize the number of expensive high-fidelity simulations while maintaining accuracy and using numerous fast and cheap low-fidelity simulations to efficiently sample to input parameter space of interest. We selected gas production from unconventional wells to demonstrate the potential speedups and accuracy of the MFMC approach. The model fidelity usually determines the trade-off between accuracy and efficiency. While the high-fidelity model is more accurate, the low-fidelity model is more efficient. Our high-fidelity simulation includes reservoir simulations of a hydraulically fractured well. On the other hand, our low-fidelity model comprises the parallel-plate flow model. We used differential programming to efficiently solve the 1D flow model, where automatic differentiation is used to efficiently compute the gradients. We matched the production profile of high-fidelity simulations with our low-fidelity simulations. Then, we used a support vector regression to map the high- and low-fidelity input parameters. The mapping function is essential to tune the low-dimensional parameter space of the low-fidelity model to the high-dimensional parameter space of the high-fidelity model. We found that we can use a combination of 9 high fidelity and 10,000 low fidelity simulations to efficiently and accurately simulate pressure management. This method is at least two orders of magnitude faster than only using high-fidelity simulations. Finally, from a broader perspective, MFMC could efficiently estimate the uncertainty of various systems and models, integrating low- and high-fidelity models.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

Monte Carlo calculations of the extraction of scintillation light from cryogenic $N$-type GaAs

We report the high scintillation luminosity of n-type GaAs at 10 °K is surprising because (1) with a refractive index of 3.5, escape is inhibited by total internal reflection and (2) narrow-beam experiments at 90 °K report infrared absorption coefficients of several per cm. This paper presents Monte Carlo calculations showing that the high luminosity at 10 °K can be explained if (1) the narrow-beam absorption is almost all optical scattering and (2) the absolute absorption coefficient is below 0.1 per cm. Sixteen surface reflector configurations are simulated for a range of internal scattering and absolute absorption coefficients, and these can guide the design of cryogenic scintillating GaAs targets for the direct detection of dark matter. The discussion section presents a possible infrared scattering mechanism based on the metallic nature of n-type GaAs. A supplement file describes (1) the Monte Carlo program steps in detail and (2) how narrow-beam and integrating sphere experiments can measure the cryogenic optical scattering and absolute absorption coefficients.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Identifying Band Inversions in Topological Materials Using Diffusion Monte Carlo

Topological insulators are characterized by insulating bulk states and robust metallic surface states. Band inversion is a hallmark of topological insulators. At time-reversal invariant points in the Brillouin zone, spin–orbit coupling (SOC) induces a swapping of orbital character at the bulk band edges. Reliably detecting band inversion in solid-state systems with many-body methods would aid in identifying possible candidates for spintronics and quantum computing applications and improve our understanding of the physics behind topologically nontrivial systems. Density functional theory (DFT) methods are a well-established means of investigating these interesting materials due to their favorable balance of computational cost and accuracy but often struggle to accurately model the electron–electron correlations present in the many materials containing heavier elements. In this work, we develop a novel method to detect band inversion within continuum quantum Monte Carlo (QMC) methods that can accurately treat the electron correlation and spin–orbit coupling that are crucial to the physics of topological insulators. Our approach applies a momentum-space-resolved atomic population analysis throughout the first Brillouin zone utilizing the Löwdin method and the one-body reduced density matrix produced with diffusion Monte Carlo (DMC). We integrate this method into QMCPACK, an open source ab initio QMC package, so that these ground-state methods can be used to complement experimental studies and validate prior DFT work on predicting the band structures of correlated topological insulators. Here, we demonstrate this new technique on the topological insulator bismuth telluride, which displays band inversion between its Bi-p and Te-p states at the Γ-point. We show an increase in charge on the bismuth-p orbital and a decrease in charge on the tellurium-p orbital when comparing band structures with and without SOC. Additionally, we use our method to compare the degree of band inversion present in monolayer Bi 2 Te 3 , which has no interlayer van der Waals interactions, to that seen in the bilayer and bulk. The method presented here will enable future many-body studies of band inversion that can shed light on the delicate interplay between correlation and topology in correlated topological materials.

Band structure↗
DOE OSTI2025

Quantum Monte Carlo and Density Functional Theory Study of Strain and Magnetism in 2D 1T-VSe 2 with Charge Density Wave States

Two-dimensional (2D) 1T-VSe 2 has prompted significant interest due to the discrepancies regarding alleged ferromagnetism (FM) at room temperature, charge density wave (CDW) states, and the interplay between the two. We employed a combined Diffusion Monte Carlo (DMC) and density functional theory (DFT) approach to accurately investigate the magnetic properties, CDW states, and their responses to strain in monolayer 1T-VSe 2 . Our calculations show the delicate competition between various phases, revealing critical insights into the relationship between their energetic and structural properties. Here, we performed classical Monte Carlo simulations informed by our DMC and DFT results and found the magnetic transition temperature (T c ) of the undistorted (non-CDW) FM phase to be 228 K and the distorted (CDW) phase to be 68 K. Additionally, we studied the response of biaxial strain on the energetic stability and magnetic properties of various phases of 2D 1T-VSe 2 and found that small amounts of strain can increase the T c , suggesting a promising route for engineering and enhancing magnetic behavior. Finally, we synthesized 1T-VSe 2 and performed Raman spectroscopy measurements, which were in close agreement with our calculated results, validating our computational approach. Our work emphasizes the role of highly accurate DMC methods in advancing the understanding of monolayer 1T-VSe 2 and provides a robust framework for future studies of 2D magnetic materials.

2D magnets↗
DOE OSTI2020

Multilevel Monte Carlo Predictions of First Passage Times in Three-Dimensional Discrete Fracture Networks: A Graph-Based Approach

In this paper, we present a method combining multilevel Monte Carlo (MLMC) and a graph-based primary subnetwork identification algorithm to provide estimates of the mean and variance of the distribution of first passage times in fracture media at significantly lower computational cost than standard Monte Carlo (MC) methods. Simulations of solute transport are performed using a discrete fracture network (DFN), and instead of using various grid resolutions for levels in the MLMC, which is standard practice in MLMC, we identify a hierarchy of subnetworks in the DFN based on the shortest topological paths through the network using a graph-based method. While the mean of these ensembles is of critical importance, the variance is also essential in fractured media where uncertainty is an overarching theme, and understanding variability across an ensemble is a requirement for safety assessments. The method provides good estimates of the mean and variance at two orders of magnitude lower computational cost than MC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A variational Monte Carlo approach for core excitations

In this work, we present a systematically improvable approach to core excitations in variational Monte Carlo. Building on recent work in excited-state-specific Monte Carlo, we show how a straightforward protocol, starting from a quantum chemistry guess, is able to capture core state's strong orbital relaxations, maintain accuracy in the near-nuclear region during these relaxations, and explicitly balance accuracy between ground and core excited states. In water, ammonia, and methane, which serve as prototypical representatives for oxygen, nitrogen, and carbon core states, respectively, this approach predicts core excitation energies within 0.3 eV of experiment and core excitation peak separations within 0.1 eV of experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗