Search NASA⌕ Search

SEARCH · Search NASA

Results for “433”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Speckle interferometry of asteroids

Steward Observatory's two-dimensional power spectrum signature analysis of speckle interferometry observations is summarized. Results for six asteroids are presented. The poles and triaxial ellipsoid dimensions of 4 Vesta, 433 Eros, 511 Davida, and 532 Herculina have been previously reported. New results for 2 Pallas and 29 Amphitrite are given, as well as further results for Vesta. Image reconstruction is ultimately required to minimize biasing effects of asteroid surface features on the simpler power spectrum analysis. Preliminary imaging results have been achieved for Vesta and Eros, and images for these two are displayed. Speckle interferometry and radiometry diameters are compared, and diameters from the two occultations of Pallas are addressed.

Drummond, Jack D.↗
NASA NTRS1991

A 21 centimeter line survey of a region around four outer galaxy open clusters

To investigate the role of atomic gas in the interaction of massive stars with the interstellar medium, a 21 cm survey was made of a region surrounding four young, outer Galaxy open clusters, NGC 281, 433, 436, and 457. A rectangular area ranging in Galactic longitude from 115 to 133 deg, and in latitude from -10 to -1 deg, was observed with the NRAO 140 foot telescope. Most of this region was fully sampled, resulting in spatial resolution equal to the telescope's 21 arcmin beamwidth. The data are presented as longitude-latitude and latitude-velocity contour maps. A catalog of atomic gas features (e.g., clouds, filaments, and shells) is given.

Leisawitz, David↗
NASA NTRS1991

Discovery of a long-term periodic variation in LMC X-3

The highly variable X-ray luminosity of LMC X-3 is found to be strongly modulated with a period of about 198 (or possibly about 99) days. Observations from satellites show this periodic variation. For energies of less than 13 keV, the X-ray intensity and hardness are positively correlated; for higher energies, there appears to be no correlation. Available optical photometry indicates the mean V brightness also varies by more than 1 mag with this same long-term period. The regularity of this 'clock' in LMC X-3 suggests that it may be related to an accretion-disk precession, similar to that seen in LMC X-4, Her X-1, SS 433, or possibly periodic variations in the mass-transfer rate.

Cowley, A. P.↗
NASA NTRS1992

Compact jets and the AGN paradigm

The nature of compact, nonthermal jets in active galactic nuclei is reviewed from both observational and theoretical standpoints. Despite rapid variations in brightness, the smallest emission regions in a jet may be relatively far removed from the central engine. Certain models for the formation of a relativistic particle beam that evolves downstream into the observed radio-infrared jet do, however, predict substantial high energy radiation from regions in the beam close to the accretion disk. Observations of such emission, and the general requirement that the jets be well collimated and accelerated to relativistic bulk velocities by the point where they are observed in the radio, can provide indirect constraints on the massive black hole accretion paradigm. Observations of well collimated, semi-relativistic jets in the accreting stellar systems SS 433 and Cyg X-3, as well as slower jets emanating from star forming regions, encourage one to associate jet formation with accretion of gas onto a compact object.

Marscher, Alan P.↗
NASA NTRS1992

Comet nucleus and asteroid sample return missions

During the 1991-92 academic year, the Pennsylvania State University has developed three sample return missions: one to the nucleus of comet Wild 2, one to the asteroid Eros, and one to three asteroids located in the Main Belt. The primary objective of the comet nucleus sample return mission is to rendezvous with a short period comet and acquire a 10 kg sample for return to Earth. Upon rendezvous with the comet, a tethered coring and sampler drill will contact the surface and extract a two-meter core sample from the target site. Before the spacecraft returns to Earth, a monitoring penetrator containing scientific instruments will be deployed for gathering long-term data about the comet. A single asteroid sample return mission to the asteroid 433 Eros (chosen for proximity and launch opportunities) will extract a sample from the asteroid surface for return to Earth. To limit overall mission cost, most of the mission design uses current technologies, except the sampler drill design. The multiple asteroid sample return mission could best be characterized through its use of future technology including an optical communications system, a nuclear power reactor, and a low-thrust propulsion system. A low-thrust trajectory optimization code (QuickTop 2) obtained from the NASA LeRC helped in planning the size of major subsystem components, as well as the trajectory between targets.

Melton, Robert G.↗
NASA NTRS1994

Access to space

The goal of this conceptual design was to devise a reusable, commercially viable, single-stage-to-orbit vehicle. The vehicle has the ability to deliver a 9100 kg (20,000 lb) payload to a low earth orbit of 433 km to 933 km (250 n.mi. - 450 n.mi.). The SSTO vehicle is 51 meters in length and has a gross takeoff mass of 680,400 kg (1,500,000 lb). The vehicle incorporates three RD-701 engines for the main propulsion system and two RL-10 engines for the orbital maneuvering system. The vehicle is designed for a three day stay on orbit with two crew members.

Source record↗
NASA NTRS1995

Optical and infrared observations of SGR 1806-20

The soft gamma-ray repeater (SGR) 1806-20 is associated with the center-brightened nonthermal nebula G10.0-0.3, thought to be a plerion. As in other plerions, a steady X-ray source, AX 1805.7-2025, has been detected coincident with the peak of the nebular radio emission. Vasisht et al. have shown that the radio peak has a core-jet appearance and argue that the core marks the true position of the SGR. At optical wavelengths, we detect three objects in the vicinity of the radio core. Only for the star closest to the core, barely visible in the optical but bright in the infrared (K-8.4 mag), the reddening is consistent with the high extinction (A(sub V) is approximately equal to 30 mag) that has been inferred for AX 1805.7 - 2025. From the absence of CO band absorption, we infer that the spectral type of this star is earlier than late-G/early-K. The large extinction probably arises in a molecular cloud located at a distance of 6 kpc, which means that the star, just like AX 1805.7-2025, is in or behind this cloud. This implies that the star is a supergiant. Since supergiants are rare, a chance coincidence with the compact radio core is very unlikely. To our knowledge, there are only three other examples of luminous stars embedded in nonthermal radio nebulae: SS 433, Cir X-1, and G70.7+1.2. Given this and the low coincidence probability, we suggest that the bright star is physically associated with SGR 1806-20, making it the first stellar indentification of a high-energy transient.

Kulkarni, S. R.↗
NASA NTRS1997

T Pyxidis: The First Cataclysmic Variable with a Collimated Jet

We present the first observational evidence for a collimated jet in a cataclysmic variable system; the recurrent nova T Pyxidis. Optical spectra show bipolar components of H(alpha) with velocities approx. 1400 km/s, very similar to those observed in the supersoft X-ray sources and in SS 433. We argue that a key ingredient of the formation of jets in the supersoft X-ray sources and T Pyx (in addition to an accretion disk threaded by a vertical magnetic field), is the presence of nuclear burning on the surface of the white dwarf.

Shahbaz, T.↗
NASA NTRS1997

Effects of Convection During the Photodeposition of Polydiacetylene Thin Films

In this work, we describe a preliminary investigation of buoyancy-driven heat transfer during the growth of thin films from solution following exposure to ultraviolet (UV) light. Irradiation of the growth cell occurs at various directions relative to gravitational acceleration. Through numerical computations, the steady-state flow and temperature profiles are simulated during the course of light exposure. Light-induced polymerization accompanies a heat transfer process through a fairly complicated recirculating flow pattern. A scaling analysis shows that buoyancy-driven velocities only reduce by a factor of 10 for gravity levels as low as 10(exp -2)g(sub 0). Paley et al. observe what appears to be gravitationally sensitive particle development and inclusion in thin films using a photodeposition process. From this study it is clear that production of homogeneous thin films would have to occur in the environment of a complicated flow pattern of recirculation with a nonuniform temperature distribution. Indeed, even when irradiation occurs from the top of the cell, the most stable stratified cell orientation, defects remain in our films due to the persistence of buoyancy-driven convection. To achieve homogeneity, minimal scattering centers, and possible molecular order, photodeposition of polymer films by UV light exposure must proceed in a reduced-convection environment. Fluid mechanics simulations are useful for establishing gravitational sensitivity to this recently discovered process (patent # 5,451,433) for preparing thin films having quite promising nonlinear optical characteristics.

Frazier, D. O.↗
NASA NTRS1997

The Effectiveness of the Proportional Counter With a Specially Designed Filter as a Solar X-Ray Monitor on the NEAR Mission

The X-ray instrument package on the Near Earth Asteroid Rendezvous (NEAR) spacecraft is designed to provide direct measurements of the major elemental abundances for the asteroid 433 Eros. These will be the first such measurements ever made for a 'primitive' body. For this task to be performed, simultaneous measurements must be provided of both the X-ray lines characteristic of major elements at the asteroid's surface as well as the solar flux, which is the source of these lines (1,2). The solar flux consists of a continuum which is generated by thermal bremstrahlung and radiative recombination, with superimposed major lines which result from emission due to transitions in H and He-like ions. The relative contribution of each component of the solar flux varies as the level of solar output changes, and thus solar output must be monitored to correct for varations in surface data caused by the changing levels of solar output.

Clark, P. E.↗
NASA NTRS1997

Cosmic Ray Induced Degradation in X-Ray Detectors On Board the Near Earth Asteroid Rendezvous Spacecraft

The Near-Earth Asteroid Rendezvous (NEAR) mission is the first in NASA's new Discovery Program to explore the solar system. Launched in February 1996, the NEAR spacecraft will take a long cruise flight arriving at the asteroid 433 Eros in January 1999 for a one year orbiting survey operation. This long exposure to the space environment has already proven to be an additional complication for the x-ray spectrometer. The asteroid pointing detectors for the x-ray spectrometer are three gas-filled proportional counters with resolving power in the range of 1 keV. Therefore, to resolve the important but closely spaced magnesium, aluminum and silicon k alpha lines( 1.255, 1.487, 1.739 keV respectively), magnesium and aluminum balanced filters are used on two of the detectors. The x-ray florescence from the surface of Eros is stimulated by solar x-rays. A proportional counter and a silicon PIN detector are used to monitor the solar incident x-ray flux. The proportional counters are single wire gas filled beryllium lined steel tubes operating at about 1100 volt. The 25 cm(exp 2) optical window is one mil. thick beryllium. To define the detector's active region, two boron nitride disks were incorporated in the tube just outside window area. It appears from the space flight data that the space environment is creating a charge on these boron nitride disks which ultimately distorts the tube gain and resolution. This broadening of the photo peak makes it more difficult to identify weak peaks and so degrades the statistical accuracy for some very important elements such as sulfur, calcium and iron (2.307, 3.690, 6.403 keV respectively). If the broadening is severe enough in the low energy region, counts will be lost as the photo peak spreads below the lower level discriminator (0.7 keV).

Floyd, S. R.↗
NASA NTRS1997

Effects of Convection during the Photodeposition of Polydiacetylene Thin Films

In this work, we describe a preliminary investigation of buoyancy-driven heat transfer during the growth of thin films from solution following exposure to ultraviolet (UV) light. Irradiation of the growth cell occurs at various directions relative to gravitational acceleration. Through numerical computations, the steady-state flow and temperature profiles are simulated during the course of light exposure. Light-induced polymerization accompanies a heat transfer process through a fairly complicated recirculating flow pattern. A scaling analysis shows that buoyancy-driven velocities only reduce by a factor of 10 for gravity levels as low as 10(exp -2) g(sub 0). Paley et al. observe what appears to be gravitationally sensitive particle development and inclusion in thin films using a photodeposition process. From this study, it is clear that production of homogeneous thin films would have to occur in the environment of a complicated flow pattern of recirculation with a nonuniform temperature distribution. Indeed, even when irradiation occurs from the top of the cell, the most stable stratified cell orientation, defects remain in our films due to the persistence of buoyancy-driven convection. To achieve homogeneity, minimal scattering centers, and possible molecular order, photodeposition of polymer films by UV light exposure must proceed in a reduced-convection environment. Fluid mechanics simulations are useful for establishing gravitational sensitivity to this recently discovered process (patent # 5,451,433) for preparing thin films having quite promising nonlinear optical characteristics.

Frazier, D. O.↗
NASA NTRS1998

UV Generation of 25 mJ/pulse at 289 nm for Ozone Lidar

Our paper describes a technique for generating tunable UV laser radiation between 250-300 nm capable of energies up to 30-5O mJ/pulse. The tunability of this source is attractive for selecting ozone absorption cross sections which are optimal for ozone DIAL detection throughout the troposphere. A Nd:YAG laser is used to pump a pulsed titanium sapphire laser which is then frequency tripled into the UV. Titanium sapphire (TiS) lases robustly between 750-900 nm. In initial experiments we have converted 110 mJ of 867 nm from a TiS laser into 28 mJ at 289 nm. The energy conversion efficiency was 62% for doubling into 433 nm and 25% into 289 nm.

Storm, Mark E.↗
NASA NTRS1997

A Precessing Disk in OJ 287?

Sillanpaa et al. have demonstrated that the active galactic nucleus OJ 287 has intensity peaks that recur within a period of about 12 yr. I suggest that this is the result of the sweeping of a precessing relativistic beam across our line of sight. In analogy to Hercules X-1 and SS 433, precession is attributed to the torque exerted by a companion mass on an accretion disk. Secondary maxima observed 1.2 yr after two of these peaks may be evidence of nodding motion.

Katz, J. I.↗
NASA NTRS1999

Role of Ocean Currents and Bottom Pressure Variability on Seasonal Polar Motion

Changes in the ocean angular momentum (OAM) components about the equatorial axes, either due to fluctuations in currents or bottom pressure (mass redistribution), can induce movements of the Earth's pole of rotation, commonly referred to as polar motion or wobble. Output from a 1 deg resolution ocean model is used to calculate the effective equatorial OAM functions chi(sub 1, sup O) and chi(sub 2, sup O), corresponding to polar motion excitation about the equatorial axis pointing to the Greenwich and 90 deg E meridians, respectively. Time series of chi(sup O) are combined with similar atmospheric series chi(sup A), computed from the National Centers for Environmental Prediction/National Center for Atmospheric Research reanalyses, to interpret the observed low-frequency polar motion excitation for the period 1985-1996. Results indicate that the oceans are a very important excitation source for the Chandler (approximately 433 days), annual, and semiannual wobbles, providing for much better amplitude and phase agreement with the observed excitation at these periods, in comparison with what is obtained when only the atmosphere is considered. Both oceanic mass and motion terms are found to be important but with mass signals having somewhat larger amplitudes. The role of regional variability in ocean currents and bottom pressure in contributing to chi(sup O) signals is quantified. Midlatitude regions (approximately 30 deg - 70 deg) figure prominently as places of strong local oceanic excitation signals. The North Pacific basin is found to be generally important for chi(sup O) excitation, while the Southern Ocean is important for both chi(sub 1, sup O) and chi(sub 2, sup O). The largest positive covariances of local with global chi(sup O) signals occur in the Kuroshio region near the western boundary of the North Pacific for chi(sub 1, sup O) and southwest of Australia for chi(sub 2, sup O).

Ponte, Rui M.↗
NASA NTRS1999

The Near-Earth Asteroid Rendezvous (NEAR) Mission, the Mars Surveyor 2001 (MS01) Mission, and the Planetary Instrument Definition and Development Program (PIDDP)

The NEAR Mission was launched on February 17, 1996 for a three year cruise to the asteroid 433 Eros. During October, November, and December 1998 cruise measurements with the gamma-ray spectrometer were made at three different escape-window-width settings. These were done in order to understand how the count rate and peak width change as the window width settings change. Analysis of these spectra was completed using the latest version of the spectral analysis program, RobWin. Results as a function of energy were combined with the results from the Schlumberger-Doll Research experiments (described below). Laboratory measurements were needed to confirm efficiency calculations above 6 MeV and to understand the relationship between the full energy peak areas and the areas of the first and second escape peaks as a function of the escape peak widths. A week of measurements was made at Schlumberger-Doll Research using their 14-MeV pulsed neutron generator and large soil samples. Data were collected after adding iron and nickel to the sample to increase the emission of high-energy lines. Approximately 24 hours of data were accumulated at each of three escape peak window widths. These data were analyzed with RobWin. Combining results from the cruise measurements and the laboratory measurements indicated that both data sets had similar energy dependence and that this energy dependence was different from that obtained using standard Monte Carlo calculations. Alternate methods of simulating the response of the detector to changes in the escape window widths are being investigated.

Source record↗
NASA NTRS2000

Synthesis and Properties of Phenylethynyl-Terminated, Star-Branched, Phenylquinoxaline Oligomers

The primary objective of this work was to prepare readily melt and solution processable phenylquinoxaline (PQ) oligomers that could be thermally crosslinked to solvent-resistant resins. Thus, a mixture of 2-(4-hydroxyphenyl)-3-phenyl-6-fluoroquinoxaline and 3-(4-hydroxyphenyl)-2-phenyl-6-fluoroquinoxaline (HPFQ) was used to prepare star-branched PQ oligomers end-capped with 4-fluoro-4-phenylethynylbenzophenone (FPEB). 1,1,1-Tris(4-hydroxyphenyl)ethane (THPE) was used as the branching unit. The oligomer number-average molecular weights (M (bar) (sub n) S) as determined by size exclusion chromatography (SEC) were close to the calculated values of 2922, 4698, 6474, and 13,578 g/mol, and their intrinsic viscosities ranged from 0.16 to 0.57 dl/g (m-cresol at 30 C). The oligomers, which were quite soluble in common organic solvents, had glass transition temperatures (T (sub g) S) that ranged from 181 to 233 C (DSC, DELTA T = 20 C/min). They also underwent an exothermic cure with maxima from 377 to 443 C. The T (sub g) S of the cured oligomers ranged from 259 to 284 C depending on the oligomer M (bar) (sub n) and the curing conditions. The oligomers had low melt viscosities, e.g. an oligomer (SPQ-46) with an M (bar) (sub n) of 4816 g/mol (SEC) had a melt viscosity of 150 Pa s at 348 C. A cured thin film of SPQ-46, which was insoluble in common organic solvents, had a room temperature (RT) tensile strength of 100 MPa, a RT modulus of 2358 MPa, and a RT elongation of 5.9%. A cured sample of SPQ-46 displayed a RT titanium-titanium lap shear tensile strength of 35.2 MPa. SPQ-46/carbon fiber(IM-7) composites, were prepared that displayed a RT flexural strength of 1902 MPa, a RT modulus of 1.38 GPa and a RT open hole compressive strength of 433 MPa.

Ooi, I. H.↗
NASA NTRS2001

Laser Altimetry for Earth and Planetary Science

Laser altimeters are presently operating on spacecraft at Mars (MOLA), at the asteroid 433 Eros (NLR), and an earlier system operated at the Moon (Clementine) several years ago. These systems have all advanced our understanding of the evolution of the primary body and several more laser altimeter systems will be launched in the next several years around Earth and other planets to address a wide range of scientific problems. Laser technology for precision altimetry and atmospheric lidar is still in its infancy but the promise of the technology and its demonstrated results already show that laser altimetry/lidar will play an important role in future space observations. To date, lasers have mapped the Moon, Mars, and an asteroid but in a short while they will help measure the planetary librations of Mercury, the tidal distortions of Europa, and tree heights, upper atmosphere winds and the icecaps of planet Earth. Major areas of interest for the immediate future are the development of long-life lasers that can withstand the rigors of long planetary missions in extreme thermal and radiation environments and continue to operate successfully for many years.

Smith, David E.↗