Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Effect of Al{sub 2}O{sub 3}/(B{sub 2}O{sub 3 }+ Na{sub 2}O) Ratio on CaO-Al{sub 2}O{sub 3}-Based Mold Fluxes: Melting Property, Viscosity, Heat Transfer, and Structure

CaO-Al{sub 2}O{sub 3}-based mold fluxes, which are under development for the continuous casting of high-Al steel, contain fluxing compounds, such as Na{sub 2}O and B{sub 2}O{sub 3}. The reaction between [Al] and the fluxing agents in mold fluxes leads to an increase in Al{sub 2}O{sub 3} and a decrease in B{sub 2}O{sub 3} and Na{sub 2}O concentrations, changing the properties of mold fluxes. The effect of the Al{sub 2}O{sub 3}/(B{sub 2}O{sub 3 }+ Na{sub 2}O) ratio on the melting properties, viscosity, heat transfer, and structure of the CaO-Al{sub 2}O{sub 3}-based mold fluxes is presented in this work. The increase of the Al{sub 2}O{sub 3}/(B{sub 2}O{sub 3 }+ Na{sub 2}O) ratio in the fluxes raised the melting temperature and high-temperature viscosity of mold fluxes but decreased the heat transfer rate across the flux disks. It also enhanced the degree of polymerization by promoting the formation of 3-D aluminate structure, which accounted for the change of the viscous behavior.

36 MATERIALS SCIENCE↗

Application of Al-2La-1B Grain Refiner to Al-10Si-0.3Mg Casting Alloy

This paper reports the application and microstructure refining effect of an Al-2La-1B grain refiner in Al-10Si-0.3Mg casting alloy. Compared with the traditional Al-5Ti-1B refiner, Al-2La-1B refiner shows better performances on the grain refinement of Al-10Si-0.3Mg alloy. Transmission electron microscopy analysis suggests that the crystallite structure features of LaB6 are beneficial to the heterogeneous nucleation of α-Al grains. Regarding the mechanical performances, tensile properties of Al-10Si-0.3Mg casting alloy are prominently improved, due to the refined microstructures.

36 MATERIALS SCIENCE↗

Highly deformable Mg–Al–Ca alloy with Al 2 Ca precipitates

Magnesium (Mg) is the lightest structural metal. However, the poor formability of Mg alloys to great extent limits their applications in making structural parts. Formability is strongly correlated to both high tensile elongation and large work hardening capacity. In this work, we report a new Mg-Al-Ca alloy in which a majority of deformable Al 2 Ca precipitates form while the formation of Laves phases of Mg 17 Al 12 and Mg 2 Ca seems suppressed. Al 2 Ca precipitates imped dislocation motion, leading to large work hardening. Then, Al 2 Ca precipitates deform with dislocations and stacking faults under the enhanced flow stress, which relieve local stress concentration and improve tensile elongation. In addition, solutes Al and Ca suppress twin nucleation while promoting non-basal dislocations in Mg. Our Mg-Al-Ca alloy demonstrates one of the highest combinations of tensile elongation and work hardening capacity among existing Mg alloys.

36 MATERIALS SCIENCE↗

Influencing mechanism of pre-existing nanoscale Al 5 Fe 2 phase on Mg–Fe interface in friction stir spot welded Al-free ZK60–Q235 joint

Al-free ZK60 magnesium (Mg) alloy sheet was selected as substrate material of Mg–steel pinless friction stir spot welding (FSSW), avoiding the effect of the Al element in the substrate on the alloying reaction of Mg-iron (Fe) interface. The sound FSSW joint of ZK60 Mg alloy and Q235 steel with a hot-dipped aluminum (Al)-containing zinc (Zn) coating was successfully realized. The detailed microstructural examinations proved that Al 5 Fe 2 phase at the Mg-Fe interface came from the pre-existing Al 5 Fe 2 phase in the coating and acted as the transition layer for promoting the metallurgical bonding of Mg and Fe. The interfaces with well-matched lattice sites among Fe, Al 5 Fe 2 and Mg were formed during FSSW. A low energy interface with good match of lattice sites ((002) Al5Fe2 //(110) Fe , [110] Al5Fe2 //[13] Fe ) between Al 5 Fe 2 and Fe was identified. For the interface between Al5Fe2 and Mg, an orientation relationship of ( 6 2 ¯ 2 ) A l 5 F e 2 / / ( 3 1 ¯ 1 ¯ 2 ¯ ) M g and [ 1 5 ¯ 8 ¯ ] A l 5 F e 2 / / [ 2 4 ¯ 23 ] M g was observed. The tensile–shear load of the ZK60–steel joint could reach 4.6 kN. Moreover, the joint fracture occurred at the interface between the Al5Fe2 layer and the Mg alloy substrate, suggesting the brittle fracture characteristic.

36 MATERIALS SCIENCE↗

First-principles study of transition-metal nitrides as diffusion barriers against Al

Using density-functional theory based first-principles calculations we provided a comparative study of the diffusion barrier properties of TiN, ZrN, and HfN against Al for U-Mo dispersion fuel applications. We firstly examined the thermodynamic stability of these transition-metal nitrides with Al. The calculated heats of reaction show that both TiN and ZrN are thermodynamically unstable diffusion barrier materials, which might be decomposed by Al at relatively high temperatures. As a comparison, HfN is a stable diffusion barrier material for Al. To evaluate the kinetic stability of these nitride systems against Al diffusion, we investigated the diffusion mechanisms of Al in TiN, ZrN and HfN using atomic scale simulations. The effect of non-stoichiometry on the defect formation and Al migration was systematically studied. (C) 2015 ELSEVIER B.V. All rights reserved

Diffusion barrier↗

Synthesis of Mg-Al and Zn-Al-layered double hydroxide nanocrystals using laser ablation in water

In this paper, we report our results on the synthesis of Mg-Al and Zn-Al-layered double hydroxides using the laser ablation in the liquid technique. To prepare these layered double hydroxides (LDH) we first began with the laser generation of a Mg (or zinc) target submerged in deionized water and then ablated an aluminum target submerged in the previously prepared Mg-deionized water suspensions (Mg-dw) to produce Mg-Al LDH and in Zn-dw to prepare Zn-Al LDH. In these ablation tests, the Mg ablation duration was selected to vary from 5 to 60 min, while the Al ablation duration was kept constant at 30 min for all samples. The generated Mg-Al LDH was a gel-like and well crystallized nanoparticles of a rod-like shape and were arranged in a well-organized pattern. When the Mg ablation duration between 25 and 35 min, the synthesized nanocrystals were stoichiometric with a formula of Mg6Al2(OH)(18)4.5 (H2O), the interlayer distance (d((0 0 3))-spacing) was 7.8 angstrom and the average grain size was 8.0 nm. The synthesized Zn-Al LDH revealed various lamellar thin plate-like nanostructures of hexagonal morphologies. The average diameters of these structures was about 500 nm and the thickness of a single layer was approximately about 6.0 nm. The XRD diffraction peaks were indexed in hexagonal lattice with a(o) = 3.07 angstrom and c(o) = 15.12 angstrom. These indexes were (002), (004), and (008) and the corresponding interlayer distances, d-spacing (angstrom), were 7.56 (002), 3.782 (004), and 1.891 (008), respectively.

36 MATERIALS SCIENCE↗

Li + Diffusion in Amorphous and Crystalline Al 2 O 3 for Battery Electrode Coatings

Al 2 O 3 is often applied protectively to lithium-ion battery anode and cathode materials to inhibit surface degradation, suppress dendrite formation, and relieve mechanical stresses. Given the very high intrinsic band gap and diffusion barrier of the material, the mechanism that allows Li diffusion through these coatings is not well understood, and widely varying laboratory results indicate that there may be dependencies on morphology and stoichiometry. Using nudged elastic band calculations and ab initio molecular dynamics, we perform a systematic investigation across Al 2 O 3 structures, both crystalline and amorphous, and at various concentrations of Li + to uncover the optimal parameters for maximally diffusive coatings. We find a correlation between the low proximity of Li + to Al 3+ and the low Li + migration barrier. Although barriers are the lowest in the highly diffusive one-dimensional channels of crystalline θ-Al 2 O 3 , the system is structurally delicate and subject to detrimental distortion as the Li + content is increased. The α-Al 2 O 3 lattice is, conversely, highly stable against distortion at all Li + concentrations but disadvantageous for Li + migration. In amorphous systems, unscreened Li + –Li + Coulomb repulsion and pre-emptive occupation of “trapping sites” combine to lower the energy barriers as a function of increasing concentration. One of our most important findings is that Al-deficient materials can sharply increase Li + movement, and we predict that an amorphous material with a combination of high Li + concentration and Al deficiency would enable highly Li + -conductive protective coatings for electrodes.

25 ENERGY STORAGE↗

Transitions in Al Coordination during Gibbsite Crystallization Using High-Field 27 Al and 23 Na MAS NMR Spectroscopy

Mechanisms of nucleation and growth of Al hydroxides such as gibbsite from aqueous solution, particularly in highly alkaline conditions, remain poorly understood. In this work, quantitative 27Al and 22Na MAS NMR experiments were conducted on solid samples extracted from the crystallization of gibbsite from an amorphous aluminum hydroxide gel precursor. The use of high magnetic field and fast sample spinning allowed transitional tetrahedral (AlT) and pentahedral (AlP) aluminum species to be observed along with the octahedral aluminum (AlO) that dominates the gibbsite product. Low-coordinated Al species could be detected at concentrations as low as 0.1% of the total Al sites. It is established that (a) AlT and AlP coexist on the surface of growing gibbsites even with a combined percentage over the total Al sites of less than 1%; (b) Different synthesis methods generate gibbsite with varying amounts of low-coordinated Al; (c) the amorphous gel precursor contains a significant amount of low-coordinated Al sites with AO: AlP: AlT ratios of approximately 4:2:1; (d) upon hydration, the external, low-coordinated Al sites become six-fold coordinated by interacting with the oxygen in H2O and the 27Al MAS NMR peak position shifts to that for the AlO sites; (e) gibbsite with increased long range order is synthesized over longer times by gradually incorporating residual AlP and AlT sites into octahedrally-coordinated AlO sites; (f) trace Na is predominantly a surface species on gibbsite particles. These findings provide a basis for understanding the gibbsite crystallization mechanism, along with a general means of characterizing gibbsite surface properties that are of equal importance for understanding related processes such as dissolution behavior.

Environmental Molecular Sciences Laboratory↗

Mechanisms of lighting enhancement of Al nanoclusters-embedded Al-doped ZnO film in GaN-based light-emitting diodes

Aluminum (Al)-doped ZnO (AZO) films with embedded Al nanoclusters were proposed and utilized to enhance the light output power and maximum operation current of GaN-based light-emitting diodes (LEDs). The AZO films were sputtered using ZnO and Al targets in a magnetron cosputtering system. With Al dc power of 7 W and ZnO 100 W ac power, the electron concentration of 4.1x10{sup 20} cm{sup -3}, electron mobility of 16.2 cm{sup 2}/V s, and resistivity of 7.2x10{sup -4} {Omega} cm were obtained for the deposited AZO film annealed at 600 deg. C for 1 min in a N{sub 2} ambient. As verified by a high resolution transmission electron microscopy, the deposited AZO films with embedded Al nanoclusters were clearly observed. A 35% increase in light output power of the GaN-based LEDs with Al nanoclusters-embedded AZO films was realized compared with the conventional LEDs operated at 500 mA. It was verified experimentally that the various characteristics of GaN-based LEDs including the antireflection, light scattering, current spreading, and the light extraction efficiency in light emission could be significantly enhanced with the use of Al nanoclusters-embedded AZO films.

36 MATERIALS SCIENCE↗

Interaction of oxygen with samarium on Al{sub 2}O{sub 3} thin film grown on Ni{sub 3}Al(111)

The interaction between oxygen and samarium (Sm) on the well-ordered thin Al{sub 2}O{sub 3} film grown on Ni{sub 3}Al(111) has been investigated by X-ray photoelectron spectroscopy and synchrotron radiation photoemission spectroscopy. At Sm coverage higher than one monolayer, exposure of oxygen to the Sm films at room temperature leads to the formation of both samarium peroxide (O{sub 2}{sup 2−}) states and regular samarium oxide (O{sup 2−}) states. By contrast, when exposing O{sub 2} to Sm film less than one monolayer on Al{sub 2}O{sub 3}, no O{sub 2}{sup 2−} can be observed. Upon heating to higher temperatures, these metastable O{sub 2}{sup 2−} states dissociate, supplying active O atoms which can diffuse through the Al{sub 2}O{sub 3} thin film to further oxidize the underlying Ni{sub 3}Al(111) substrate, leading to the significant increase of the Al{sub 2}O{sub 3} thin film thickness. Therefore, it can be concluded that Sm, presumably in its peroxide form, acts as a catalyst for the further oxidation of the Ni{sub 3}Al substrate by supplying the active oxygen species at elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical mixing at “Al on Fe” and “Fe on Al” interfaces

The chemical mixing at the “Al on Fe” and “Fe on Al” interfaces was studied by molecular dynamics simulations of the layer growth and by {sup 57}Fe Mössbauer spectroscopy. The concentration distribution along the layer growth direction was calculated for different crystallographic orientations, and atomically sharp “Al on Fe” interfaces were found when Al grows over (001) and (110) oriented Fe layers. The Al/Fe(111) interface is also narrow as compared to the intermixing found at the “Fe on Al” interfaces for any orientation. Conversion electron Mössbauer measurements of trilayers—Al/{sup 57}Fe/Al and Al/{sup 57}Fe/Ag grown simultaneously over Si(111) substrate by vacuum evaporation—support the results of the molecular dynamics calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the {sup 24}Mg({sup 3}He,p){sup 26}Al cross section: Implication for {sup 26}Al production in the early solar system

The nucleosynthetic origin of {sup 26}Al (t{sub 1/2}=0.72 Myr) in the early solar system is still an open question. Several models predict that short-lived radionuclides could be produced by irradiation of circumsolar material by light charged particles emitted by the young sun. Within some models, most of the {sup 26}Al is produced by {sup 3}He-induced reactions on {sup 24}Mg. Little experimental data exist on {sup 3}He reactions so that irradiation models have had to rely on theoretical cross sections deduced from statistical nuclear reaction codes. We performed a direct measurement of the {sup 26}Al production on Mg target by means of {gamma} ray spectroscopy and accelerator mass spectrometry (AMS). The data indicate that the theoretical cross section used in previous approaches was overestimated by a factor of 3. Taking the particle spectra considered in theoretical approaches these data lead to a net reduction of the {sup 26}Al production of a factor of 2. We calculated the relative contribution of the different {sup 26}Al production channels depending on the irradiation scenario. We show that extremely large particles fluxes would be necessary to reach the canonical {sup 26}Al/{sup 27}Al =5x10{sup -5} in solids that were present in the early solar system. An in situ origin of this important isotopic chronometer by irradiation is unlikely.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Er Al :Al 2 ⁢O 3 for telecom-band photonics: Electronic structure and optical properties

Er-doped Al 2 ⁢O 3 is a promising host for telecom-band integrated photonics. Here, in this study, we combine ab initio calculations with a symmetry-resolved analysis to elucidate substitutional Er on the Al site (Er Al ) in 𝛼−Al 2 ⁢O 3 . First-principles relaxations confirm the structural stability of Er Al . We then use the local trigonal crystal-field symmetry to classify the Er-derived impurity levels by irreducible representations and to derive polarization-resolved electric-dipole selection rules, explicitly identifying the symmetry-allowed 𝑓−𝑑 hybridization channels. Kubo-Greenwood absorption spectra computed from Kohn-Sham states quantitatively corroborate these symmetry predictions. Furthermore, we connect the calculated intra-4⁢𝑓 line strengths to Judd-Ofelt theory, clarifying the role of 4⁢𝑓−5⁢𝑑 admixture in enabling optical activity. Notably, we predict a characteristic absorption near 1.47 µ⁢m (telecom band), relevant for on-chip amplification and emission. To our knowledge, a symmetry-resolved first-principles treatment of Er:Al 2 ⁢O 3 with an explicit Judd-Ofelt interpretation has not been reported, providing a transferable framework for tailoring rare-earth dopants in wide-band-gap oxides for integrated photonics. Our results for the optical spectra are in good agreement with experimental data. The resulting symmetry-based selection rules translate directly to polarization-dependent coupling in Al 2 ⁢O 3 integrated photonic waveguides and resonators, enabling device-level design of TE/TM-mode interaction with Er emitters in the 1.5-µ⁢m telecom band.

Er-doped Al2O3↗

Transparent conducting Si-codoped Al-doped ZnO thin films prepared by magnetron sputtering using Al-doped ZnO powder targets containing SiC

Transparent conducting Al-doped ZnO (AZO) thin films codoped with Si, or Si-codoped AZO (AZO:Si), were prepared by radio-frequency magnetron sputtering using a powder mixture of ZnO, Al{sub 2}O{sub 3}, and SiC as the target; the Si content (Si/[Si+Zn] atomic ratio) was varied from 0 to 1 at. %, but the Al content (Al/[Al+Zn] atomic ratio) was held constant. To investigate the effect of carbon on the electrical properties of AZO:Si thin films prepared using the powder targets containing SiC, the authors also prepared thin films using a mixture of ZnO, Al{sub 2}O{sub 3}, and SiO{sub 2} or SiO powders as the target. They found that when AZO:Si thin films were deposited on glass substrates at about 200 degree sign C, both Al and Si doped into ZnO acted as effective donors and the atomic carbon originating from the sputtered target acted as a reducing agent. As a result, sufficient improvement was obtained in the spatial distribution of resistivity on the substrate surface in AZO:Si thin films prepared with a Si content (Si/[Si+Zn] atomic ratio) of 0.75 at. % using powder targets containing SiC. The improvement in resistivity distribution was mainly attributed to increases in both carrier concentration and Hall mobility at locations on the substrate corresponding to the target erosion region. In addition, the resistivity stability of AZO: Si thin films exposed to air for 30 min at a high temperature was found to improve with increasing Si content.

36 MATERIALS SCIENCE↗

Al-Ca and Al-Fe metal-metal composite strength, conductivity, and microstructure relationships

Deformation processed metal-metal composites (DMMC’s) are composites formed by mechanical working (i.e., rolling, swaging, or wire drawing) of two-phase, ductile metal mixtures. Since both the matrix and reinforcing phase are ductile metals, the composites can be heavily deformed to reduce the thickness and spacing of the two phases. Recent studies have shown that heavily drawn DMMCs can achieve anomalously high strength and outstanding combinations of strength and conductivity. In this study, Al-Fe wire composite with 0.07, 0.1, and 0.2 volume fractions of Fe filaments and Al-Ca wire composite with 0.03, 0.06, and 0.09 volume fractions of Ca filaments were produced in situ, and their mechanical properties were measured as a function of deformation true strain. The Al-Fe composites displayed limited deformation of the Fe phase even at high true strains, resulting in little strengthening effect in those composites. Al-9vol%Ca wire was deformed to a deformation true strain of 13.76. The resulting Ca second-phase filaments were deformed to thicknesses on the order of one micrometer. The ultimate tensile strength increased exponentially with increasing deformation true strain, reaching a value of 197 MPa at a true strain of 13.76. This value is 2.5 times higher than the value predicted by the rule of mixtures. A quantitative relationship between UTS and deformation true strain was determined. X-ray diffraction data on transformation of Al + Ca microstructures to Al + various Al-Ca intermetallic compounds were obtained at the Advanced Photon Source at Argonne National Laboratory. Electrical conductivity was measured over a range of true strains and post-deformation heat treatment schedules.

36 MATERIALS SCIENCE↗

Numerical Analysis of Temperature Gradients and Interface Shape During Directional Solidification of Al and Al-Cu Alloy Under Microgravity Conditions

Numerical modeling was undertaken to analyze the influence of radial thermal gradient on solid/liquid interface shape and convection patterns during solidification of pure Al and Al-4 wt. % Cu alloy. Steady state calculations were performed for different gravity levels and orientations. Furthermore, transient modeling was undertaken to investigate effect of the solidification velocity. The furnace configuration used in this analysis is the proposed International Space Station Furnace. Results from a thermal model of the furnace core were used as initial boundary conditions for solidification modeling. The Solidification model was adopted from previous work and was based on the finite element code FIDAP. Thermocouple data and quenched interface shape from a pure Al sample flown on the Life Sciences and Microgravity Spacelab (LMS) mission, July 1996 was used for model validation. Good agreement was obtained between the predicted interface shape and that measured from the quenched LMS sample. It was found that the imposed temperature boundary condition must be sufficiently smooth for the heat fluxes in the model to be self-consistent. The model predicted that alloy sample Al-Cu is more sensitive to variations in the gravity level compared to pure Al. For Al-Cu alloy, solute diffusivity is approximately 10(exp 4) times smaller than thermal diffusivity of pure Al. Hence, in a microgravity environment the weak convection has no measurable effect on the heat fluxes, but is still strong enough to affect concentration distribution. Since the alloy melting temperature is determined by concentration the interface shape depends on the level of convection. This was found not to be the case for pure metal.

Bune, Andris V.↗

Thermomechanical Properties of Neutron Irradiated Al 3 Hf-Al Thermal Neutron Absorber Materials

A thermal neutron absorber material composed of Al 3 Hf particles in an aluminum matrix is under development for the Advanced Test Reactor. This metal matrix composite was fabricated via hot pressing of high-purity aluminum and micrometer-size Al 3 Hf powders at volume fractions of 20.0, 28.4, and 36.5%. Room temperature tensile and hardness testing of unirradiated specimens revealed a linear relationship between volume fraction and strength, while the tensile data showed a strong decrease in elongation between the 20 and 36.5% volume fraction materials. Tensile tests conducted at 200 °C on unirradiated material revealed similar trends. Evaluations were then conducted on specimens irradiated at 66 to 75 °C to four dose levels ranging from approximately 1 to 4 dpa. Tensile properties exhibited the typical increase in strength and decrease in ductility with dose that are common for metallic materials irradiated at ≤0.4T m . Hardness also increased with neutron dose. The difference in strength between the three different volume fraction materials was roughly constant as the dose increased. Nanoindentation measurements of Al 3 Hf particles in the 28.4 vol% material showed the expected trend of increased hardness with irradiation dose. Transmission electron microscopy revealed oxygen at the interface between the Al 3 Hf particles and aluminum matrix in the irradiated material. Scanning electron microscopy of the exterior surface of tensile tested specimens revealed that deformation of the material occurs via plastic deformation of the Al matrix, cracking of the Al 3 Hf particles, and to a lesser extent, tearing of the matrix away from the particles. The fracture surface of an irradiated 28.4 vol% specimen showed failure by brittle fracture in the particles and ductile tearing of the aluminum matrix with no loss of cohesion between the particles and matrix. The coefficient of thermal expansion decreased upon irradiation, with a maximum change of –6.3% for the annealed irradiated 36.5 vol% specimen.

36 MATERIALS SCIENCE↗