Search NASA⌕ Search

SEARCH · Search NASA

Results for “ANSYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

AESOP: An interactive computer program for the design of linear quadratic regulators and Kalman filters

AESOP is a computer program for use in designing feedback controls and state estimators for linear multivariable systems. AESOP is meant to be used in an interactive manner. Each design task that the program performs is assigned a "function" number. The user accesses these functions either (1) by inputting a list of desired function numbers or (2) by inputting a single function number. In the latter case the choice of the function will in general depend on the results obtained by the previously executed function. The most important of the AESOP functions are those that design,linear quadratic regulators and Kalman filters. The user interacts with the program when using these design functions by inputting design weighting parameters and by viewing graphic displays of designed system responses. Supporting functions are provided that obtain system transient and frequency responses, transfer functions, and covariance matrices. The program can also compute open-loop system information such as stability (eigenvalues), eigenvectors, controllability, and observability. The program is written in ANSI-66 FORTRAN for use on an IBM 3033 using TSS 370. Descriptions of all subroutines and results of two test cases are included in the appendixes.

Lehtinen, B.↗
NASA NTRS1984

Modeling concepts for communication of geometric shape data

ANSI5, an abbreviation for Section 5 of the American National Standard under Engineering Drawing and Related Documentation Practices (Committee Y14) on Digital Representation for Communication of Product Definition Data (ANSI Y14.26M-1981), allows encoding of a broad range of geometric shapes to be communicated through digital channels. A brief review of its underlying concepts is presented. The intent of ANSI5 is to devise a unified set of concise language formats for transmission of data pertaining to five types of geometric entities in Euclidean 3 space (E(3)). These are regarded as point like, curve like, surface like, solid like, and a combination of these types. For the first four types, ANSI5 makes a distinction between the geometry and topology. Geometry is a description of the spatial occupancy of the entity, and topology discusses the interconnectedness of the entity's boundary components.

Collins, M. F.↗
NASA NTRS1984

The Multimission Image Processing Laboratory's virtual frame buffer interface

Large image processing systems use multiple frame buffers with differing architectures and vendor supplied interfaces. This variety of architectures and interfaces creates software development, maintenance and portability problems for application programs. Several machine-dependent graphics standards such as ANSI Core and GKS are available, but none of them are adequate for image processing. Therefore, the Multimission Image Processing laboratory project has implemented a programmer level virtual frame buffer interface. This interface makes all frame buffers appear as a generic frame buffer with a specified set of characteristics. This document defines the virtual frame uffer interface and provides information such as FORTRAN subroutine definitions, frame buffer characteristics, sample programs, etc. It is intended to be used by application programmers and system programmers who are adding new frame buffers to a system.

Wolfe, T.↗
NASA NTRS1985

New Enhancements in April 85 NASTRAN Release

Several features were added to COSMIC NASTRAN, along with some enhancements to improve or update existing capabilities. Most of these additions and enhancements were provided by industry users to be incorporated into NASTRAN for wider use. DIAG 48 provides a synopsis of significant developments in past NASTRAN releases (1983-1985) and indexes all diagnostic output messages and operation requests (DOMOR). Other features include: volume and surface computation of the 2-D and 3-D elements, NOLIN5 input and; NASTRAN PLOTOPT-N (where N = 2, 3, 4, or 5); shrink element plots; and output scan. A nonprint option on stress and force output request cards was added. Automated find and nofind options on the plot card, fully stressed design, high level plate elements, eigenvalue messages, and upgrading of all FORTRAN source code to the ANSI standard are enhancements made.

Chan, G. C.↗
NASA NTRS1985

Care 3 model overview and user's guide, first revision

A manual was written to introduce the CARE III (Computer-Aided Reliability Estimation) capability to reliability and design engineers who are interested in predicting the reliability of highly reliable fault-tolerant systems. It was also structured to serve as a quick-look reference manual for more experienced users. The guide covers CARE III modeling and reliability predictions for execution in the CDC CYber 170 series computers, DEC VAX-11/700 series computer, and most machines that compile ANSI Standard FORTRAN 77.

Bavuso, S. J.↗
NASA NTRS1982

Computer program for prediction of capture maneuver probability for an on-off reaction controlled upper stage

A FORTRAN coded computer program which computes the capture transient of a launch vehicle upper stage at the ignition and/or separation event is presented. It is for a single degree-of-freedom on-off reaction jet attitude control system. The Monte Carlo method is used to determine the statistical value of key parameters at the outcome of the event. Aerodynamic and booster induced disturbances, vehicle and control system characteristics, and initial conditions are treated as random variables. By appropriate selection of input data pitch, yaw and roll axes can be analyzed. Transient response of a single deterministic case can be computed. The program is currently set up on a CDC CYBER 175 computer system but is compatible with ANSI FORTRAN computer language. This routine has been used over the past fifteen (15) years for the SCOUT Launch Vehicle and has been run on RECOMP III, IBM 7090, IBM 360/370, CDC6600 and CDC CYBER 175 computers with little modification.

Knauber, R. N.↗
NASA NTRS1986

Analysis of Lubricant Jet Flow

Computer program, IMPOUT 2, developed using newly-established "limit formulas" to prevent lubricant non-impingement on pinion. Program used to analyze impingement depth on gear teeth for oil jet located at out-of-mesh position with arbitrary offset and inclination angles and with arbitrary addendum and center-distance modification. IMPOUT 2 program written in ANSI FORTRAN IV for use on CDC 750.

Townsend, D. P.↗
NASA NTRS1985

CARE 3, Version 4 enhancements

The enhancements and error corrections to CARE III Version 4 are listed. All changes to Version 4 with the exception of the internal redundancy model were implemented in Version 5. Version 4 is the first public release version for execution on the CDC Cyber 170 series computers. Version 5 is the second release version and it is written in ANSI standard FORTRAN 77 for execution on the DEC VAX 11/700 series computers and many others.

Bryant, L. A.↗
NASA NTRS1986

STEP and STEPSPL: Computer programs for aerodynamic model structure determination and parameter estimation

The successful parametric modeling of the aerodynamics for an airplane operating at high angles of attack or sideslip is performed in two phases. First the aerodynamic model structure must be determined and second the associated aerodynamic parameters (stability and control derivatives) must be estimated for that model. The purpose of this paper is to document two versions of a stepwise regression computer program which were developed for the determination of airplane aerodynamic model structure and to provide two examples of their use on computer generated data. References are provided for the application of the programs to real flight data. The two computer programs that are the subject of this report, STEP and STEPSPL, are written in FORTRAN IV (ANSI l966) compatible with a CDC FTN4 compiler. Both programs are adaptations of a standard forward stepwise regression algorithm. The purpose of the adaptation is to facilitate the selection of a adequate mathematical model of the aerodynamic force and moment coefficients of an airplane from flight test data. The major difference between STEP and STEPSPL is in the basis for the model. The basis for the model in STEP is the standard polynomial Taylor's series expansion of the aerodynamic function about some steady-state trim condition. Program STEPSPL utilizes a set of spline basis functions.

Batterson, J. G.↗
NASA NTRS1986

Fairness of channel access for non-time-critical traffic using the FDDI token ring protocol

The Fiber Distributed Data Interface (FDDI) is an ANSI draft proposed standard for a 100 megabit per second fiber optic token ring. FDDI supports two types of traffic, synchronous and asynchronous. Synchronous traffic is time critical traffic; stations are assigned guaranteed bandwidth to support their synchronous needs. Asynchronous traffic is lower priority and is sent only if time permits. It is proved analytically that the FDDI access protocol provides all stations on the ring with equal access to the channel to transmit asynchronous frames, regardless of the relative sizes of synchronous bandwidth allocations for individual stations. Analytic results are supported with data from simulation runs.

Johnson, M. J.↗
NASA NTRS1986

Investigation of local area networks for an obiting space station

An investigation and test of various equipment was conducted to determine its state of repair and suitability for use in a test-bed computer network (to be used to simulate a space station configuration of computers for control and monitoring). A research study was also made of various network types, including the IEEE network standards: (1) Carrier Sense Multiple Access with Collision Detection. (2) Token Passing Bus (3) Token Passing Ring, and (4) the draft ANSI standard for a High Speed Local Network, CSMA with Collision Avoidance. No firm conclusions are possible at this time as to which would be most suitable. An evaluation of the user interface of a space station database program, FREDSS (Formatted Retrieval and Entry of Data for Space Station, preliminary version), was also conducted and recommendations were made for possible improvements.

Deacetis, L. A.↗
NASA NTRS1985

Toward the development of guidelines for technical report preparation

American National Standards Institute (ANSI) standard Z39.18, 'Guidelines for Format and Production of Scientific and Technical Reports', is undergoing revision. Background describing the standard's evolution is presented as is the strategy used for undertaking the revision. The issues central to revising the standard are presented along with an explanation of how each issue will be handled. Related research and literature relevant to the standard's revision are included.

Pinelli, T. E.↗
NASA NTRS1987

Shape design sensitivity analysis and optimization of three dimensional elastic solids using geometric modeling and automatic regridding

An automatic regridding method and a three dimensional shape design parameterization technique were constructed and integrated into a unified theory of shape design sensitivity analysis. An algorithm was developed for general shape design sensitivity analysis of three dimensional eleastic solids. Numerical implementation of this shape design sensitivity analysis method was carried out using the finite element code ANSYS. The unified theory of shape design sensitivity analysis uses the material derivative of continuum mechanics with a design velocity field that represents shape change effects over the structural design. Automatic regridding methods were developed by generating a domain velocity field with boundary displacement method. Shape design parameterization for three dimensional surface design problems was illustrated using a Bezier surface with boundary perturbations that depend linearly on the perturbation of design parameters. A linearization method of optimization, LINRM, was used to obtain optimum shapes. Three examples from different engineering disciplines were investigated to demonstrate the accuracy and versatility of this shape design sensitivity analysis method.

Yao, Tse-Min↗
NASA NTRS1987

Transferable Output ASCII Data (TOAD) file format description

Described is a format for writing ASCII data on a file to facilitate its transfer from one computer system to another. The TOAD format conforms to all ANSI FORTRAN 77 standards. There are two advantages in using the TOAD format. First, TOAD files are of the preferred type and record length to make them easy to edit, read from and write on magnetic tape, or transfer across communications networks. Secondly, application programs, using the TOAD format to write computational results, are more portable and the answer files easier to postprocess. TOAD utility software is listed in an appendix.

Bingel, Bradford↗
NASA NTRS1986

Survey of computer programs for heat transfer analysis

An overview is given of the current capabilities of thirty-three computer programs that are used to solve heat transfer problems. The programs considered range from large general-purpose codes with broad spectrum of capabilities, large user community, and comprehensive user support (e.g., ABAQUS, ANSYS, EAL, MARC, MITAS II, MSC/NASTRAN, and SAMCEF) to the small, special-purpose codes with limited user community such as ANDES, NTEMP, TAC2D, TAC3D, TEPSA and TRUMP. The majority of the programs use either finite elements or finite differences for the spatial discretization. The capabilities of the programs are listed in tabular form followed by a summary of the major features of each program. The information presented herein is based on a questionnaire sent to the developers of each program. This information is preceded by a brief background material needed for effective evaluation and use of computer programs for heat transfer analysis. The present survey is useful in the initial selection of the programs which are most suitable for a particular application. The final selection of the program to be used should, however, be based on a detailed examination of the documentation and the literature about the program.

Noor, Ahmed K.↗
NASA NTRS1987

Proof that timing requirements of the FDDI token ring protocol are satisfied

The fiber distributed data interface (FDDI) is an ANSI draft proposed standard for a 100 Mbit/s fiber-optic token ring. The FDDI timed token access protocol provides dynamic adjustment of the load offered to the ring, with the goal of maintaining a specified token rotation time and of providing a guaranteed upper bound on time between successive arrivals of the token at a station. FDDI also provides automatic recovery when errors occur. The bound on time between successive token arrivals is guaranteed only if the token rotates quickly enough to satisfy timer requirements in each station when all ring resources are functioning properly. Otherwise, recovery would be initiated unnecessarily. The purpose of this paper is to prove that FDDI timing requirements are satisfied, i.e., the token rotates quickly enough to prevent initiation of recovery unless there is failure of a physical resource or unless the network management entity within a station initiates the recovery process.

Johnson, Marjory J.↗
NASA NTRS1988

File-Format Program For Transferable Output ASCII Data

TOAD utilities machine-independent and require minimal central memory. Transferable Output ASCII Data (TOAD) file-format computer program facilitates transfer of data files from one computer installation to another. TOAD files preferred type and record length, easy to edit, read, and write on magnetic tape or transfer across communications networks. Applications programs write TOAD files directly and conform to all ANSI FORTRAN 77 standards.

Bingle, Bradford↗
NASA NTRS1988

Performance analysis of FDDI

The Fiber Distributed Data Interface (FDDI) is an imerging ANSI and ISO standard for a 100 megabit per second fiber optic token ring. The performance of the FDDI media access control protocol is analyzed using a simulation developed at NASA Ames. Both analyses using standard measures of performance (including average delay for asynchronous traffic, channel utilization, and transmission queue length) and analyses of characteristics of ring behavior which can be attributed to constraints imposed by the timed token protocol on token holding time (including bounded token rotation time, support for synchronous traffic, and fairness of channel access for nodes transmitting asynchronous traffic) are included.

Johnson, Marjory J.↗