SEARCH · Search NASA

Results for “Adverse pressure gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Numerical solutions of Navier-Stokes equations for the structure of a trailing vortex

The structure and decay of a trailing vortex were analyzed during the numerical solutions of the full Navier-Stokes equations. Unsteady forms of the governing equations were recast in terms of circulation, vorticity, and stream function as dependent variables, and a second upwind finite difference scheme was used to integrate them with prescribed initial and boundary conditions. The boundary conditions at the outer edge and at the outflow section of the trailing vortex were considered. Different models of the flow were postulated, and solutions were obtained describing the development of the flow as integration proceeds in time. A parametric study was undertaken with a view to understanding the various phenomena that may possibly occur in the trailing vortex. Using the Hoffman and Joubert law of circulation at the inflow section, the results of this investigation were compared with experimental data for a Convair 990 wind model and a rectangular wing. With an exponentially decaying law of circulation at the inflow section and an adverse pressure gradient at the outer edge of the trailing vortex, solutions depict vortex bursting through the sudden expansion of the core and/or through the stagnation and consequent reversal of the flow on the axis. It was found that this bursting takes place at lower values of the swirl ratio as the Reynolds number increases.

Jain, A. C.↗

NASA NTRS1977

Features of a separating turbulent boundary layer in the vicinity of separation

Laser anemometer measurements using a directionally sensitive system were obtained for a nominally two-dimensional separating turbulent boundary layer produced by an adverse pressure gradient. An airfoil-type flow was generated in which the flow was accelerated and then decelerated until separation. The results include the skin friction, mean velocity profiles, turbulent shear stresses and intensities, spectra, dissipation rate, turbulent/non-turbulent interfacial intermittency, and eddy speeds.

Simpson, R. L.↗

NASA NTRS1977

A critical evaluation of invariant second-order closure models for subsonic boundary layers

Computations based on several second-order turbulence models, including full Reynolds stress and two-equation models, are compared with a number of boundary-layer experiments. In general, the models represent the data reasonably well, with skin friction tending to be somewhat overpredicted in the far downstream region of the adverse pressure gradient experiments. A discussion of the behavior of the ARAP full Reynolds stress model in predicting the components of the Reynolds stress tensor is given. It is concluded that compatibility at the wall may necessitate the use of more than one length scale.

Rubesin, M. W.↗

NASA NTRS1978

Bi-directional, buried-wire skin-friction gage

A compact, nonobtrusive, bi-directional, skin-friction gage was developed to measure the mean shear stress beneath a three-dimensional boundary layer. The gage works by measuring the heat flux from two orthogonal wires embedded in the surface. Such a gage was constructed and its characteristics were determined for different angles of yaw in a calibration experiment in subsonic flow with a Preston tube used as a standard. Sample gages were then used in a fully three-dimensional turbulent boundary layer on a circular cone at high relative incidence, where there were regimes of favorable and adverse pressure gradients and three-dimensional separation. Both the direction and magnitude of skin friction were then obtained on the cone surface.

Higuchi, H.↗

NASA NTRS1978

Wind-tunnel results for an improved 21-percent-thick low-speed airfoil section

Low speed wind tunnel tests were conducted to evaluate the effects on performance of modifying a 23 percent thick low speed airfoil. The airfoil contour was altered to reduce the upper-surface adverse pressure gradient and hence reduce boundary layer separation. The chord Reynolds number varied from about 2,000,000 to 9,000,000.

Mcghee, R. J.↗

NASA NTRS1980

Asymmetric trailing-edge flows at high Reynolds number

Results from an experimental investigation of asymmetric trailing-edge flows at high Reynolds numbers and subsonic Mach numbers are presented. Measurements include skin friction; surface and flow-field pressures; and mean-velocity, turbulent shear-stress, and turbulent kinetic-energy profiles in the trailing-edge region. Comparisons are made with computed solutions using Reynolds averaged Navier-Stokes and boundary-layer equations; two different turbulence models are used. Two attached flow are considered, one having a moderate adverse pressure gradient and the other a more severe gradient. From the comparisons, an evaluation is made of the predictions for these two pressure-gradient cases. Although the comparisons demonstrate reasonable agreement for the moderate pressure-gradient case, some differences are noted for the severe pressure-gradient case.

Cleary, J. W.↗

NASA NTRS1981

Energy efficient engine, low-pressure turbine boundary layer program

A study was conducted to investigate development of boundary layers under the influence of velocity distributions simulating the suction side of two state-of-the-art turbine airfoils: a forward loaded airfoil (squared-off design) and an aft loaded airfoil (aft-loaded design). These velocity distributions were simulated in a boundary layer wind tunnel. Detailed measurements of boundary layer mean velocity and turbulence intensity profiles were obtained for an inlet turbulence level of 2.4 percent and an exit Reynolds number of 800,000. Flush-mounted hot film probes identified the boundary layer transition regimes in the adverse pressure gradient regions for both velocity distributions. Wall intermittency data showed good agreement with the correlations of Dhawan and Narasimha for the intermittency factor distribution in transitional flow regimes.

Gardner, W. B.↗

NASA NTRS1980

On the stabilization of three-dimensional boundary layers by suction and cooling

A significant reduction in the drag of transonic aircraft can be achieved by using an active method of boundary-layer control to maintain laminar flow on the aerodynamic surfaces. The stabilizing influence of suction for both favorable and adverse pressure gradients is demonstrated by means of the self-similar incompressible three-dimensional boundary layers on yawed wedges. Profile instability is measured by the maximum amplification rate of fixed-frequency disturbances computed according to linearized, locally parallel, spatial stability theory. Suction is found to be more effective in controlling Tollmien-Schlichting instability than stationary cross-flow disturbances. The effectiveness of surface cooling as a method of stabilization is compared with suction for the boundary layers on a transonic 35 deg swept wing of infinite span. It is found from compressible stability theory that when the surface is cooled to a uniform temperature such that the maximum cross-flow velocity is reduced by the same amount as with a uniform suction distribution, the stabilizing effect of cooling on cross-flow disturbances is less than with suction.

Mack, L. M.↗

NASA NTRS1981

Numerical simulation of transonic flows in diffusers

Numerical simulations were made of two-dimensional transonic flows in diffusers, including flow separation induced by a shock or adverse pressure gradient. The mass-averaged, time-dependent, compressible Navier-Stokes equations, simplified by the thin-layer approximation, were solved using MacCormack's hybrid method. The eddy-viscosity formulation was described by the Wilcox-Rubesin's two-equation, k-omega model. Detailed comparison of the computed results with measurements showed good agreement in all cases, including one with massive separation induced by a strong shock. The computation correctly predicted the details of a distinct lambda shock pattern, closely duplicating the configuration observed experimentally in spark-schlieren photographs.

Liou, M.-S.↗

NASA NTRS1981

Some aspects of calculating flows about three-dimensional subsonic inlets

Various three dimensional inlet models were calculated based on the potential flow model. Results are presented in the forms of surface static pressure, flow angularity, surface flow pattern, and inlet flow field. It is indicated that the extension of the lower lip can reduce the adverse pressure gradient and increase the flow separation bound.

Kao, H. C.↗

NASA NTRS1982

Numerical simulations of unsteady transonic flow in diffusers

Forced and naturally occurring, self-sustaining oscillations of transonic flows in two-dimensional diffusers were computed using MacCormack's hybrid method. Depending upon the shock strengths and the area ratios, the flow was fully attached or separated by either the shock or the adverse pressure gradient associated with the enlarging diffuser area. In the case of forced oscillations, a sinusoidal plane pressure wave at frequency 300 Hz was prescribed at the exit. A sufficiently large amount of data were acquired and Fourier analyzed. The distrbutions of time-mean pressures, the power spectral density, and the amplitude with phase angle along the top wall and in the core region were determined. Comparison with experimental results for the forced oscillation generally gave very good agreement; some success was achieved for the case of self-sustaining oscillation despite substantial three-dimensionality in the test. An observation of the sequence of self-sustaining oscillations was given.

Liou, M.-S.↗

NASA NTRS1982

Analysis of an existing experiment on the interaction of acoustic waves with a laminar boundary layer

The hot-wire anemometer amplitude data contained in the 1977 report of P. J. Shapiro entitled, ""The Influence of Sound Upon Laminar Boundary'' were reevaluated. Because the low-Reynolds number boundary layer disturbance data were misinterpreted, an effort was made to improve the corresponding disturbance growth rate curves. The data are modeled as the sum of upstream and downstream propagating acoustic waves and a wave representing the Tollmien-Schlichting (TS) wave. The amplitude and phase velocity of the latter wave were then adjusted so that the total signal reasonably matched the amplitude and phase angle hot-wire data along the plate laminar boundary layer. The revised rates show growth occurring further upstream than Shapiro found. It appears that the premature growth is due to the adverse pressure gradient created by the shape of the plate. Basic elements of sound propagation in ducts and the experimental and theoretical acoustic-stability literature are reviewed.

Schopper, M. R.↗

NASA NTRS1982

An experimental documentation of a separated trailing-edge flow at a transonic Mach number

A detailed experiment on the separated flow field at a sharp trailing edge is described and documented. The separated flow is a result of sustained adverse pressure gradients. The experiment was conducted using an elongated airfoil-like model at a transonic Mach number and at a high Reynolds number of practical interest. Measurements made include surface pressures and detailed mean and turbulence flow quantities in the region just upstream of separation to downstream into the near-wake, following wake closure. The data obtained are presented mostly in tabular form. These data are of sufficient quality and detail to be useful as a test case for evaluating turbulence models and calculation methods.

Viswanath, P. R.↗

NASA NTRS1982

Experimental measurements of unsteady turbulent boundary layers near separation

Investigations conducted to document the behavior of turbulent boundary layers on flat surfaces that separate due to adverse pressure gradients are reported. Laser and hot wire anemometers measured turbulence and flow structure of a steady free stream separating turbulent boundary layer produced on the flow of a wind tunnel section. The effects of sinusoidal and unsteadiness of the free stream velocity on this separating turbulent boundary layer at a reduced frequency were determined. A friction gage and a thermal tuft were developed and used to measure the surface skin friction and the near wall fraction of time the flow moves downstream for several cases. Abstracts are provided of several articles which discuss the effects of the periodic free stream unsteadiness on the structure or separating turbulent boundary layers.

Simpson, R. L.↗

NASA NTRS1983

On the structure of wall-bounded turbulent flows

The variable-interval time-averaging (VITA) technique developed by Blackwelder and Kaplan is applied to data obtained from large-eddy simulation of turbulent channel flow in an investigation of the organized structures associated with the bursting phenomenon in the near-wall region. Conditionally averaged velocities, shear stress, pressure, and vorticity are discussed in conjunction with the bursting phenomenon detected by the VITA technique. The conditionally averaged pressure reveals that the ejection process is associated with a localized adverse pressure gradient. In the plane perpendicular to the flow direction, the conditionally averaged vorticity field indicates that a pair of counterrotating streamwise vorticity is being lifted through the ejection process.

Kim, J.↗

NASA NTRS1981

Unsteady boundary-layer injection

The boundary-layer equations for two-dimensional incompressible flow are integrated numerically for the flow over a flat plate and a Howarth body. Injection is introduced either impulsively or periodically along a narrow strip. Results indicate that injection perpendicular to the wall is transmitted instantly across the boundary layer and has little effect on the velocity profile parallel to the wall. The effect is a little more noticeable for flows with adverse pressure gradients. Injection parallel to the wall results in fuller velocity profiles. Parallel and oscillatory injection appears to influence the mean. The amplitude of oscillation decreases with distance from the injection strip but further downstream it increases again in a manner reminiscent of an unstable process.

Telionis, D. P.↗

NASA NTRS1983

An integral analysis of transonic normal shock wave/turbulent boundary layer interactions in internal flow

An approximate integral viscous-inviscid interaction method is presented for calculating the development of a turbulent boundary layer subjected to a normal shock wave induced adverse pressure gradient in an internal axisymmetric flow. The inflow conditions and the downstream pressure are provided for the computation. In the supersonic region of shock pressure rise, the Prandtl-Meyer function is used to couple the viscous and inviscid flows. An analytical model for the coupling process is postulated and appropriate equations are defined. Downstream of the sonic point, one-dimensional inviscid flow is assumed for coupling with the viscous flow. The turbulent boundary layer is calculated using Green's integral lag-entrainment method. Comparisons of the solutions with the experimental data are made for interactions which are unseparated, near separation and separated. For comparison purposes, solutions to the time-dependent, mass-averaged, Navier-Stokes equations incorporating a two-equation, Wilcox-Rubesin turbulence model are also shown. The computed results from the integral method show good agreement with experimental data for unseparated interactions and reasonable agreement with the trend of the viscous effects when the interaction becomes increasingly separated.

Om, D.↗

NASA NTRS1983

SC3 - A wing concept for supersonic maneuvering

A supersonic wing design concept that overcomes the problems associated with nonlinear inviscid pressure distribution is presented together with a summary of the supporting theoretical and experimental development program. The key design feature is a conical panel supporting a controlled supercritical conical camber (SC3) crossflow expansion and recompression which permits lift on the upper surface to be obtained without producing an adverse pressure gradient or crossflow shock wave strong enough to separate the boundary layer. The role of aerodynamics in the design implementation is discussed, as are the concept development, the initial design validation on a fabricated and tested SC3 design, and the body and canard interaction effect. The design and testing of an isolated wing with a planform and thickness distribution representative of a practical application are described. Wind-tunnel results show that significant performance gains can be obtained for fighter aircraft using this concept.

Mason, W. H.↗