Search NASA⌕ Search

SEARCH · Search NASA

Results for “Approach Plate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Porous and Microporous Honeycomb Composites as Potential Boundary-Layer Bleed Materials

Results of an experimental investigation are presented in which the use of porous and microporous honeycomb composite materials is evaluated as an alternate to perforated solid plates for boundary-layer bleed in supersonic aircraft inlets. The terms "porous" and "microporous," respectively, refer to bleed orifice diameters roughly equal to and much less than the displacement thickness of the approach boundary-layer. A Baseline porous solid plate, two porous honeycomb, and three microporous honeycomb configurations are evaluated. The performance of the plates is characterized by the flow coefficient and relative change in boundary-layer profile parameters across the bleed region. The tests were conducted at Mach numbers of 1.27 and 1.98. The results show the porous honeycomb is not as efficient at removing mass compared to the baseline. The microporous plates were about equal to the baseline with one plate demonstrating a significantly higher efficiency. The microporous plates produced significantly fuller boundary-layer profiles downstream of the bleed region for a given mass flow removal rate than either the baseline or the porous honeycomb plates.

Davis, D. O.↗
NASA NTRS1990

Linear instability of the supersonic wake behind a flat plate aligned with a uniform stream

A theoretical and numerical study is presented of the growth of linear disturbances in the laminar compressible supersonic wake behind a flat plate aligned with a uniform stream. The approach adopted is that of classical linear stability theory and covers both two- and three-dimensional disturbances. The basic flow is described, and the linear stability problem is formulated that leads to the compressible Rayleigh equation. The stability of short-wave disturbances is then analyzed in the very near wake where the compressible analog of the Goldstein double structure provides an asymptotic description for the unperturbed flow. The behavior of long waves is then considered. The waves are not as long as the plate length but are long compared to the boundary-layer thickness. Numerical solutions of the Rayleigh equation are discussed. Numerical results are then presented for a range of streamwise stations, Mach numbers, and wave propagation angles.

Papageorgiou, D. T.↗
NASA NTRS1993

Vibration of thermally buckled composite plates with initial deflections using triangular elements

A consistent finite element formulation is presented for the analysis of thermal postbuckling and free vibration of thermally buckled thin, laminated composite plates subjected to large temperature change. The influence of moderately large initial imperfections in deflection on the thermal postbuckling deflection and the vibration characteristics of the buckled plate is also investigated. The finite element equations of motion are derived from the principle of virtual work. These equations can be mathematically separated into two sets and solved in sequence. The first set of equations yields the particular solution of static thermal postbuckling deflection, and the second set of equations gives the homogeneous solution of vibration characteristics on the buckled plate. The first set of static equations is solved by using Newton-Raphson iteration method. The tangent stiffness matrix in the final iteration is equal to the total stiffness matrix of the second set of dynamic equations. This feature saves tremendous computation time in comparing with using the conventional approach. The influence of lamination angle, temperature distribution, plate planform of arbitrary shape, and boundary support conditions on postbuckling and vibration behavior are investigated.

Zhou, R. C.↗
NASA NTRS1976

A study of turbulent flow between parallel plates by a statistical method

Turbulent Couette flow between parallel plates was studied from a statistical mechanics approach utilizing a model equation, similar to the Boltzmann equation of kinetic theory, which was proposed by Lundgren from the velocity distribution of fluid elements. Solutions to this equation are obtained numerically, employing the discrete ordinate method and finite differences. Two types of boundary conditions on the distribution function are considered, and the results of the calculations are compared to available experimental data. The research establishes that Lundgren's equation provides a very good description of turbulence for the flow situation considered and that it offers an analytical tool for further study of more complex turbulent flows. The present work also indicates that modelling of the boundary conditions is an area where further study is required.

Srinivasan, R.↗
NASA NTRS1978

Environmental qualification testing of terrestrial solar cell modules

The placement of solar cell modules in various climates and locations throughout the world results in different degrees and combinations of environmental stresses. Coupled with a design lifetime goal of 20 years, early detection and correction of module design deficiencies can result in significantly better long-term economics. This paper describes an environmental test research program for developing qualification requirements and procedures for flat-plate solar cell modules. A multiple iterative approach for establishing and evaluating test requirements is discussed as well as the rationale for the selection of levels and durations for the current qualification tests. The status of study efforts involving optical surface soiling, encapsulation delamination, and voltage bias-humidity testing is reviewed.

Hoffman, A. R.↗
NASA NTRS2000

Mars Umbilical Technology Demonstrator

The objective of this project is to develop a autonomous umbilical mating for the mars umbilical technology demonstrator. The Mars Umbilical Technology Demonstrator (MUTD) shall provide electrical power and fiber optic data cable connections between two simulated mars vehicles. The Omnibot is used to provide the mobile base for the system. The mate to umbilical plate is mounted on a three axis Cartesian table, which is installed on the Omnibot mobile base. The Omnibot is controlled in a teleoperated mode. The operator using the vision system will guide the Omnibot to get close to the mate to plate. The information received from four ultrasonic sensors is used to identify the position of mate to plate and mate the umbilical plates autonomously. A successful experimentation verifies the approach.

Houshangi, Nasser↗
NASA NTRS2003

Concepts and Development of Bio-Inspired Distributed Embedded Wired/Wireless Sensor Array Architectures for Acoustic Wave Sensing in Integrated Aerospace Vehicles

This paper discusses the modeling of acoustic emissions in plate structures and their sensing by embedded or surface bonded piezoelectric sensor arrays. Three different modeling efforts for acoustic emission (AE) wave generation and propagation are discussed briefly along with their advantages and disadvantages. Continuous sensors placed at right angles on a plate are being discussed as a new approach to measure and locate the source of acoustic waves. Evolutionary novel signal processing algorithms and bio-inspired distributed sensor array systems are used on large structures and integrated aerospace vehicles for AE source localization and preliminary results are presented. These systems allow for a great reduction in the amount of data that needs to be processed and also reduce the chances of false alarms from ambient noises. It is envisioned that these biomimetic sensor arrays and signal processing techniques will be useful for both wireless and wired sensor arrays for real time health monitoring of large integrated aerospace vehicles and earth fixed civil structures. The sensor array architectures can also be used with other types of sensors and for other applications.

Ghoshal, Anindya↗
NASA NTRS1993

Reliability based structural optimization - A simplified safety index approach

A probabilistic optimal design methodology for complex structures modelled with finite element methods is presented. The main emphasis is on developing probabilistic analysis tools suitable for optimization. An advanced second-moment method is employed to evaluate the failure probability of the performance function. The safety indices are interpolated using the information at mean and most probable failure point. The minimum weight design with an improved safety index limit is achieved by using the extended interior penalty method of optimization. Numerical examples covering beam and plate structures are presented to illustrate the design approach. The results obtained by using the proposed approach are compared with those obtained by using the existing probabilistic optimization techniques.

Reddy, Mahidhar V.↗
NASA NTRS1980

Computational models for the nonlinear analysis of reinforced concrete plates

A finite element computational model for the nonlinear analysis of reinforced concrete solid, stiffened and cellular plates is briefly outlined. Typically, Mindlin elements are used to model the plates whereas eccentric Timoshenko elements are adopted to represent the beams. The layering technique, common in the analysis of reinforced concrete flexural systems, is incorporated in the model. The proposed model provides an inexpensive and reasonably accurate approach which can be extended for use with voided plates.

Hinton, E.↗
NASA NTRS2013

A Multi-scale Refined Zigzag Theory for Multilayered Composite and Sandwich Plates with Improved Transverse Shear Stresses

The Refined Zigzag Theory (RZT) enables accurate predictions of the in-plane displacements, strains, and stresses. The transverse shear stresses obtained from constitutive equations are layer-wise constant. Although these transverse shear stresses are generally accurate in the average, layer-wise sense, they are nevertheless discontinuous at layer interfaces, and thus they violate the requisite interlaminar continuity of transverse stresses. Recently, Tessler applied Reissner's mixed variational theorem and RZT kinematic assumptions to derive an accurate and efficient shear-deformation theory for homogeneous, laminated composite, and sandwich beams, called RZT(m), where "m" stands for "mixed". Herein, the RZT(m) for beams is extended to plate analysis, where two alternative assumptions for the transverse shear stresses field are examined: the first follows Tessler's formulation, whereas the second is based on Murakami's polynomial approach. Results for elasto-static simply supported and cantilever plates demonstrate that Tessler's formulation results in a powerful and efficient structural theory that is well-suited for the analysis of multilayered composite and sandwich panels.

Iurlaro, Luigi↗
NASA NTRS1937

Pressure Drop Across Finned Cylinders Enclosed in a Jacket

The pressure drop across finned cylinders in a jacket for a range of air speeds from approximately 13 to 230 miles per hour has been investigated. Tests were made to determine the effect on the pressure drop of changes in fin space, fin width, jacket entrance and exit areas, skirt-approach radius, and the use of fillets and a separator plate at the rear of the cylinder. The pressure drop across the cylinder increased as the fin space decreased, the increase being very rapid at fin spaces smaller than approximately 0.20 inch. Fin width had little effect on the pressure drop for the range of widths tested. The pressure drop across the cylinder was nearly halved by increasing the skirt-approach radius from 3/4 inch to 1-1/4 inches, but fillets and a separator plate at the rear of the cylinder had little effect on the pressure drop. The pressure drop across a cylinder with tapered fins was greater than that for a cylinder having rectangular fins with the same effective fin spacing.

Rollin, Vern G↗
NASA NTRS2007

Crew Exploration Vehicle Environmental Control and Life Support Fire Protection Approach

As part of preparing for the Crew Exploration Vehicle (CEV), the National Aeronautics and Space Administration (NASA) worked on developing the requirements to manage the fire risk. The new CEV poses unique challenges to current fire protection systems. The size and configuration of the vehicle resembles the Apollo capsule instead of the current Space Shuttle or the International Space Station. The smaller free air volume and fully cold plated avionic bays of the CEV requires a different approach in fire protection than the ones currently utilized. The fire protection approach discussed in this paper incorporates historical lessons learned and fire detection and suppression system design philosophy spanning from Apollo to the International Space Station. Working with NASA fire and materials experts, this approach outlines the best requirements for both the closed out area of the vehicle, such as the avionics bay, and the crew cabin area to address the unique challenges due to the size and configuration of the CEV.

Lewis, John F.↗
NASA NTRS1993

A global/local analysis method for treating details in structural design

A method for analyzing global/local behavior of plate and shell structures is described. In this approach, a detailed finite element model of the local region is incorporated within a coarser global finite element model. The local model need not be nodally compatible (i.e., need not have a one-to-one nodal correspondence) with the global model at their common boundary; therefore, the two models may be constructed independently. The nodal incompatibility of the models is accounted for by introducing appropriate constraint conditions into the potential energy in a hybrid variational formulation. The primary advantage of this method is that the need for transition modeling between global and local models is eliminated. Eliminating transition modeling has two benefits. First, modeling efforts are reduced since tedious and complex transitioning need not be performed. Second, errors due to the mesh distortion, often unavoidable in mesh transitioning, are minimized by avoiding distorted elements beyond what is needed to represent the geometry of the component. The method is applied reduced to a plate loaded in tension and transverse bending. The plate has a central hole, and various hole sixes and shapes are studied. The method is also applied to a composite laminated fuselage panel with a crack emanating from a window in the panel. While this method is applied herein to global/local problems, it is also applicable to the coupled analysis of independently modeled components as well as adaptive refinement.

Aminpour, Mohammad A.↗
DOE OSTI2026

Tuning Solid Electrolyte Interphase Formation before Plating Onset in Anode-Free Sodium Batteries

Sodium (Na) batteries are of growing interest due to the higher earth abundance of sodium than lithium, as well as their promising theoretical energy density when metallic Na anodes are used. However, Na plating and stripping are heavily influenced by the physicochemical properties of the solid electrolyte interphase (SEI), which is directly influenced by the solvent and salt used for the electrolyte. While most studies focus on the SEI that forms on the surface of Na metal after plating, we expand this analysis by identifying a nanoscale “pre-plating” SEI that forms on the current collector (CC) prior to the onset of Na plating. Here, we systematically investigate an array of Na salt and glyme solvents in the electrolyte and determine the associated impacts on pre-plating SEI formation on aluminum CCs. By combining analytical electrochemistry approaches with a multimodal suite of spectroscopy techniques (X-ray, infrared, and Raman), supported by density functional theory calculations, we reveal a direct correlation between the Na + coordination environment and pre-plating SEI composition. We find that longer-chain glymes produce larger proportions of organic alkoxide products in the interphase, consistent with increased Na + −glyme interactions, while the fraction of salt-derived inorganic products (e.g., NaF) correlates with Na + −anion coordination. These insights highlight the critical influence of electrolyte composition particularly solvent identity and Na + coordination on the initial SEI formation in anode-free Na batteries.

anode-free batteries↗
NASA NTRS1972

Stability of orthotropic stiffened composite plates.

It is pointed out that the buckling problem of a plate with restrictions resulting from boundary conditions is suited for an application of Lagrangian multipliers. An approach used by Budiansky and Hu (1946) is extended to the study of orthotropic stiffened plates. The variations of the total energy with respect to the three deformation components are considered. The equilibrium equations and the boundary conditions are obtained. It is shown that the deflection functions must satisfy the equilibrium equations. The Lagrangian multipliers are then used to solve stability problems on the basis of the total energy involved, the equilibrium equations, and the boundary conditions. The theoretical analysis is supplemented by an experimental investigation.

Chiu, K. D.↗
NASA NTRS1976

A wind tunnel investigation of circular and straked cylinders in transonic cross flow

Pressure distributions around circular and circular/strake cylinders were measured in a wind tunnel at Mach numbers from 0.6 to 1.2 with Reynolds number independently variable from 10,000 to 100,000. The local pressures are integrated over the cylinder surface to determine the variation of drag coefficient with both Mach number and Reynolds number. Effects of tunnel blockage are evaluated by comparing results from circular cylinders of various diameters at common Mach and Reynolds number conditions. Compressibility effects are concluded to be responsible for a flight reduction of the drag coefficient near Mach 0.7. Drag increases with strake height, presumably approaching a maximum drag corresponding to a flat plate configuration.

Macha, J.↗
NASA NTRS1985

Holographic optical system for aberration corrections in laser Doppler velocimetry

An optical system containing multifaceted holographic optical elements (HOEs) has been developed to correct for aberrations introduced by nonflat windows in laser Doppler velocimetry. The multifacet aberration correction approach makes it possible to record on one plate many sets of adjacent HOEs that address different measurement volume locations. By using 5-mm-diameter facets, it is practical to place 10-20 sets of holograms on one 10 x 12.5-cm plate, so that the procedure of moving the entire optical system to examine different locations may not be necessary. The holograms are recorded in dichromated gelatin and therefore are nonabsorptive and suitable for use with high-power argon laser beams. Low f-number optics coupled with a 90-percent efficient distortion-correcting hologram in the collection side of the system yield high optical efficiency.

Kim, R. C.↗