Search NASA⌕ Search

SEARCH · Search NASA

Results for “Automated Tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

An evaluation of programmer/analyst workstations

Very few automated tools were available to support software requirements analysis and design even though improvements in quality during these phases appear to offer the greatest leverage for improving the quality and productivity of the overall software development process. Recently, however, some such tools have appeared on the market. An industry survey, and an in-house evaluation of two commercial products by programmers and analysts was undertaken to determine which tool is the best to support programmers and analysts through life cycle development. A tool was selected for full implementation on a project, where complete analysis of software statistics over the system life cycle will determine whether or not quality and productivity improvements have actually occurred. The results of the industry survey and in-house evaluation are summarized.

Koerner, K.↗
NASA NTRS1986

Electronic controls and displays for a Space Station workstation

A workstation to serve as a man/machine interface for one of the test beds used in the NASA-Space Station development effort is described which will also serve as a demonstrator of the advanced technologies anticipated for the Space Station workstation. Thin-film electroluminescent flat-panels may replace the presently used CRTs for image generation, and the development of multifunctional controls, advanced graphic generators, and videodisc technology are considered. A generalized window management algorithm will control the large volume of information required, and conventional office automation tools such as spread sheets and database managers will be applied to workstation image management.

Busquets, A. M.↗
NASA NTRS1987

Sensitivity and optimization of composite structures using MSC/NASTRAN

Design sensitivity analysis for composites will soon be available in MSC/NASTRAN. The design variables for composites can be lamina thicknesses, orientation angles, material properties or a combination of all three. With the increasing use of composites in aerospace and automotive industries, this general capability can be used in its own right for carrying out sensitivity analysis of complicated real-life structures. As part of a research effort, the sensitivity analysis was coupled with a general purpose optimizer. This preliminary version of the optimizer is capable of dealing with minimum weight structural design with a rather general design variable linking capability at the element level or system level. Only sizing type of design variables (i.e., lamina thicknesses) can be handled by the optimizer. Test cases were run and validated by comparison with independent finite element packages. The linking of design sensitivity capability for composites in MSC/NASTRAN with an optimizer would give designers a powerful automated tool to carry out practical opitmization design of real-life complicated composite structures.

Nagendra, Gopal K.↗
NASA NTRS1988

Two implementations of the Expert System for the Flight Analysis System (ESFAS) project

A comparison is made between the two most sophisticated expert system building tools, the Automated Reasoning Tool (ART) and the Knowledge Engineering Environment (KEE). The same problem domain (ESFAS) was used in making the comparison. The Expert System for the Flight Analysis System (ESFAS) acts as an intelligent front end for the Flight Analysis System (FAS). FAS is a complex configuration controlled set of interrelated processors (FORTRAN routines) which will be used by the Mission Planning and Analysis Div. (MPAD) to design and analyze Shuttle and potential Space Station missions. Implementations of ESFAS are described. The two versions represent very different programming paradigms; ART uses rules and KEE uses objects. Due to each of the tools philosophical differences, KEE is implemented using a depth first traversal algorithm, whereas ART uses a user directed traversal method. Either tool could be used to solve this particular problem.

Wang, Lui↗
NASA NTRS1988

Space Station Information Systems

The utility of the Space Station is improved, the ability to manage and integrate its development and operation enhanced, and the cost and risk of developing the software for it is minimized by three major information systems. The Space Station Information System (SSIS) provides for the transparent collection and dissemination of operational information to all users and operators. The Technical and Management Information System (TMIS) provides all the developers with timely and consistent program information and a project management 'window' to assess the project status. The Software Support Environment (SSE) provides automated tools and standards to be used by all software developers. Together, these three systems are vital to the successful execution of the program.

Pittman, Clarence W.↗
NASA NTRS1989

Grid sensitivity capability for large scale structures

The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

Nagendra, Gopal K.↗
NASA NTRS1988

Automated workstation for the operation of spacecraft engineering subsystems

This paper addresses the development of a workstation that exploits automated tools to enable an operator to monitor concurrently several engineering subsystems and/or several space missions. The use of artificial intelligence and advanced graphics capabilities to achieve fast prototypes is discussed. The monitoring of engineering telemetry data from the Power and Pyro Subsystem of the Galileo spacecraft is emphasized.

Bahrami, K. A.↗
NASA NTRS1990

Spacecraft command verification: The AI solution

Recently, a knowledge-based approach was used to develop a system called the Command Constraint Checker (CCC) for TRW. CCC was created to automate the process of verifying spacecraft command sequences. To check command files by hand for timing and sequencing errors is a time-consuming and error-prone task. Conventional software solutions were rejected when it was estimated that it would require 36 man-months to build an automated tool to check constraints by conventional methods. Using rule-based representation to model the various timing and sequencing constraints of the spacecraft, CCC was developed and tested in only three months. By applying artificial intelligence techniques, CCC designers were able to demonstrate the viability of AI as a tool to transform difficult problems into easily managed tasks. The design considerations used in developing CCC are discussed and the potential impact of this system on future satellite programs is examined.

Fesq, Lorraine M.↗
NASA NTRS1990

An assessment of advanced displays and controls technology applicable to future space transportation systems

The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined.

Hatfield, Jack J.↗
NASA NTRS1991

ISyCL technical report

The Air Force Integrated Information Systems Evolution Environment (IISEE) is a program focused on the development of technology for enabling the planning definition development and maintenance of evolutionary integrated information systems. This program has studied the representational needs of this knowledge base from the point of view of the needs of engineering, manufacturing, and logistics Evolutionary Information Systems (EIS). The definition of the concepts for a suite of automated tools and environments to support the pursuit of such engineering, manufacturing, and logistics EIS's has also required examination of languages and representation schemes for the knowledge base of these integrated systems. To accomplish this purpose, the language must be very rich, and must support object orientation, relational orientation, persistent storage, process transaction specification, and first order logic. The task of designing a unified language which supports these paradigms is a challenge. The Information Systems Constraint Language (ISyCL) is described. It was designed to meet the definitional and knowledge representation needs of three perspectives. It supports users from the area expert to the data base designer.

Decker, Louis P.↗
NASA NTRS1991

Analysis of methods

Information is one of an organization's most important assets. For this reason the development and maintenance of an integrated information system environment is one of the most important functions within a large organization. The Integrated Information Systems Evolution Environment (IISEE) project has as one of its primary goals a computerized solution to the difficulties involved in the development of integrated information systems. To develop such an environment a thorough understanding of the enterprise's information needs and requirements is of paramount importance. This document is the current release of the research performed by the Integrated Development Support Environment (IDSE) Research Team in support of the IISEE project. Research indicates that an integral part of any information system environment would be multiple modeling methods to support the management of the organization's information. Automated tool support for these methods is necessary to facilitate their use in an integrated environment. An integrated environment makes it necessary to maintain an integrated database which contains the different kinds of models developed under the various methodologies. In addition, to speed the process of development of models, a procedure or technique is needed to allow automatic translation from one methodology's representation to another while maintaining the integrity of both. The purpose for the analysis of the modeling methods included in this document is to examine these methods with the goal being to include them in an integrated development support environment. To accomplish this and to develop a method for allowing intra-methodology and inter-methodology model element reuse, a thorough understanding of multiple modeling methodologies is necessary. Currently the IDSE Research Team is investigating the family of Integrated Computer Aided Manufacturing (ICAM) DEFinition (IDEF) languages IDEF(0), IDEF(1), and IDEF(1x), as well as ENALIM, Entity Relationship, Data Flow Diagrams, and Structure Charts, for inclusion in an integrated development support environment.

Mayer, Richard J.↗
NASA NTRS1992

Automating sky object classification in astronomical survey images

We describe the application of machine classification techniques to the development of an automated tool for the reduction of a large scientific data set. The 2nd Palomer Observatory Sky Survey is nearly completed. This survey provides comprehensive coverage of the northern celestial hemisphere in the form of photographic plates. The plates are being transformed into digitized images whose quality will probably not be surpassed in the next ten to twenty years. The images are expected to contain on the order of 10(exp 7) galaxies and 10(exp 8) stars. Astronomers wish to determine which of these sky objects belong to various classes of galaxies and stars. The size of this data set precludes manual analysis. Our approach is to develop a software system which integrates the functions of independently developed techniques for image processing and data classification. Digitized sky images are passed through image processing routines to identify sky objects and to extract a set of features for each object. These routines are used to help select a useful set of attributes for classifying sky objects. Then GID3* and O-BTree, two inductive learning techniques, learn classification decision trees from examples. These classifiers will be used to process the rest of the data. This paper gives an overview of the machine learning techniques used, describes the details of our specific application, and reports the initial encouraging results. The results indicate that our approach is well-suited to the problem. The primary benefits of the approach are increased data reduction throughput and consistency of classification. The classification rules which are the product of the inductive learning techniques will form an object, examinable basis for classifying sky objects. A final, not to be underestimated benefit is that astronomers will be freed from the tedium of an intensely visual task to pursue more challenging analysis and interpretation problems based on automatically cataloged data.

Fayyad, Usama M.↗
NASA NTRS1993

The enhanced Software Life Cyle Support Environment (ProSLCSE): Automation for enterprise and process modeling

In this paper, we have introduced a comprehensive method for enterprise modeling that addresses the three important aspects of how an organization goes about its business. FirstEP includes infrastructure modeling, information modeling, and process modeling notations that are intended to be easy to learn and use. The notations stress the use of straightforward visual languages that are intuitive, syntactically simple, and semantically rich. ProSLCSE will be developed with automated tools and services to facilitate enterprise modeling and process enactment. In the spirit of FirstEP, ProSLCSE tools will also be seductively easy to use. Achieving fully managed, optimized software development and support processes will be long and arduous for most software organizations, and many serious problems will have to be solved along the way. ProSLCSE will provide the ability to document, communicate, and modify existing processes, which is the necessary first step.

Milligan, James R.↗
NASA NTRS1987

ASAP: An Ada static source code analyzer program

A user's manual is described and is provided for ASAP, an automated tool for static source code analysis of programs written in the Ada programming language. The purpose of the analysis is to collect and store information pertaining to the analyzed Ada compilation unit's size, complexity, usage of Ada language constructs and features, and static interface with other Ada compilation units.

Doubleday, Dennis Lee↗
NASA NTRS1991

VLSI synthesis of digital application specific neural networks

Neural networks tend to fall into two general categories: (1) software simulations, or (2) custom hardware that must be trained. The scope of this project is the merger of these two classifications into a system whereby a software model of a network is trained to perform a specific task and the results used to synthesize a standard cell realization of the network using automated tools.

Beagles, Grant↗
NASA NTRS1993

Object-oriented technologies in a multi-mission data system

The Operations Engineering Laboratory (OEL) at JPL is developing new technologies that can provide more efficient and productive ways of doing business in flight operations. Over the past three years, we have worked closely with the Multi-Mission Control Team to develop automation tools, providing technology transfer into operations and resulting in substantial cost savings and error reduction. The OEL development philosophy is characterized by object-oriented design, extensive reusability of code, and an iterative development model with active participation of the end users. Through our work, the benefits of object-oriented design became apparent for use in mission control data systems. Object-oriented technologies and how they can be used in a mission control center to improve efficiency and productivity are explained. The current research and development efforts in the JPL Operations Engineering Laboratory are also discussed to architect and prototype a new paradigm for mission control operations based on object-oriented concepts.

Murphy, Susan C.↗
NASA NTRS1993

Expert diagnostics system as a part of analysis software for power mission operations

The operation of interplanetary spacecraft at JPL has become an increasingly complex activity. This complexity is due to advanced spacecraft designs and ambitious mission objectives which lead to operations requirements that are more demanding than those of any previous mission. For this reason, several productivity enhancement measures are underway at JPL within mission operations, particularly in the spacecraft analysis area. These measures aimed at spacecraft analysis include: the development of a multi-mission, multi-subsystem operations environment; the introduction of automated tools into this environment; and the development of an expert diagnostics system. This paper discusses an effort to integrate the above mentioned productivity enhancement measures. A prototype was developed that integrates an expert diagnostics system into a multi-mission, multi-subsystem operations environment using the Galileo Power / Pyro Subsystem as a testbed. This prototype will be discussed in addition to background information associated with it.

Harris, Jennifer A.↗
NASA NTRS1994

Structural/aerodynamic Blade Analyzer (SAB) User's Guide, Version 1.0

The structural/aerodynamic blade (SAB) analyzer provides an automated tool for the static-deflection analysis of turbomachinery blades with aerodynamic and rotational loads. A structural code calculates a deflected blade shape using aerodynamic loads input. An aerodynamic solver computes aerodynamic loads using deflected blade shape input. The two programs are iterated automatically until deflections converge. Currently, SAB version 1.0 is interfaced with MSC/NASTRAN to perform the structural analysis and PROP3D to perform the aerodynamic analysis. This document serves as a guide for the operation of the SAB system with specific emphasis on its use at NASA Lewis Research Center (LeRC). This guide consists of six chapters: an introduction which gives a summary of SAB; SAB's methodology, component files, links, and interfaces; input/output file structure; setup and execution of the SAB files on the Cray computers; hints and tips to advise the user; and an example problem demonstrating the SAB process. In addition, four appendices are presented to define the different computer programs used within the SAB analyzer and describe the required input decks.

Morel, M. R.↗