Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY LAYER REMOVAL - SUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Numerical study of supersonic turbulent flow over small protuberances

Supersonic turbulent boundary layers over two-dimensional protuberances are investigated, using the numerical finite difference alternating direction implicit (ADI) method. The turbulence is modeled mathematically. The turbulence is represented here by the eddy viscosity approach. The turbulent boundary layer structure as well as an interest in thick boundary layers and much larger protuberance heights than in the laminar case lead to new difficulties. The problems encountered and the means to remove them are discussed.

Polak, A.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33873-DND

NOAA's National Air Quality Forecasting Capability (NAQFC) model provides 48-hour forecast of surface ozone and other atmospheric constituents serving as the nation's key tool actively used by regulatory professionals in assessing air quality events and the issuance of public air quality alerts. NAQFC incorporates input meteorology from North American Mesoscale Model (NAM) at 12 km horizontal resolution that is coupled to the Community Multi-scale Air Quality Model (CMAQ) to predict emissions, tropospheric gas and aerosol chemistry, and related deposition and removal processes. The NAQFC forecast simulations contain 35 steps in altitude, with about one third of these in a typical afternoon daytime boundary layer (0-1.5 km). While several studies have been conducted comparing NAQFC predictions to surface observations, investigations comparing the vertical distribution to observations remain limited. Vertical comparisons are needed in order to fully assess forecast model behavior and atmospheric mixing conditions leading to the formation of ozone at the surface. The Tropospheric Ozone Lidar Network (TOLNet) instruments provide a unique observational capability in this regard, as ozone vertical measurements can be directly compared to models, such as NAQFC, and provide additional insight into atmospheric processes and enhance forecast capabilities. In this study, we utilize multiple TOLNet lidar observations obtained during the Ozone Water Land Environmental Transition Studies (OWLETS-2017 & OWLETS-2018) and the Long Island Sound Tropospheric Ozone Study (LISTOS-2018) to compare with NAQFC vertical predictions of ozone. These campaigns took place at different coastal locations along the US East coast with each campaign having multiple TOLNet lidars present, providing a unique opportunity to examine vertical structure of ozone in regions with complex water-land boundaries. Preliminary comparison results will be presented on ozone temporal and vertical differences between NAQFC and the TOLNet lidars along with example case studies to illustrate insights into boundary layer and surface processes of trace gases.

Timothy Berkoff↗
NASA NTRS2022

Observation Impact and Information Retention in the Lower Troposphere of the GMAO GEOS Data Assimilation System

In this study, we have assessed the effectiveness of the use of existing observing systems in the lower troposphere in the GEOS hybrid–4DEnVar data assimilation system through a set of observing system experiments. The results show that microwave radiances have a large impact in the Southern Hemisphere and Tropical ocean, but the large influence is mostly observed above 925 hPa and dissipates relatively quickly with longer forecast lead times. Conventional data information holds better in the forecast ranging from the surface to 100 hPa, depending on the field evaluated, in the Northern Hemisphere and lowest model levels in the Tropics. Infrared radiances collectively have much less impact in the lower troposphere. Removing surface observations has small but persistent impact on specific humidity in the upper atmosphere, but small or negligible impact on planetary boundary layer (PBL) height and temperature. The model responses to the incremental analysis update (IAU) forcing are also analyzed. In the IAU assimilation window, the physics responds strongly to the IAU forcing in the lower troposphere, and the changes of physics tendency in the lower troposphere and hydrodynamics tendency in the mid- and upper troposphere are viewed as beneficial to the reduction of state error covariance. In the subsequent forecast, the model tendencies continue to deviate further from the original free forecast with forecast lead times around 300–400 hPa, but physics tendency has showed signs of returning to its original free forecast mechanisms at 1-day forecast in the lower troposphere.

GEOS↗
NASA NTRS1974

On the theory of compliant wall drag reduction in turbulent boundary layers

A theoretical model has been developed which can explain how the motion of a compliant wall reduces turbulent skin friction drag. Available experimental evidence at low speeds has been used to infer that a compliant surface selectively removes energy from the upper frequency range of the energy containing eddies and through resulting surface motions can produce locally negative Reynolds stresses at the wall. The theory establishes a preliminary amplitude and frequency criterion as the basis for designing effective drag reducing compliant surfaces.

Ash, R. L.↗
NASA NTRS1991

Advancements in engineering turbulence modeling

Some new developments in two-equation models and second order closure models are presented. Two-equation models (k-epsilon models) have been widely used in computational fluid dynamics (CFD) for engineering problems. Most of low-Reynolds number two-equation models contain some wall-distance damping functions to account for the effect of wall on turbulence. However, this often causes the confusion and difficulties in computing flows with complex geometry and also needs an ad hoc treatment near the separation and reattachment points. A set of modified two-equation models is proposed to remove the aforementioned shortcomings. The calculations using various two-equation models are compared with direct numerical simulations of channel flow and flat boundary layers. Development of a second order closure model is also discussed with emphasis on the modeling of pressure related correlation terms and dissipation rates in the second moment equations. All the existing models poorly predict the normal stresses near the wall and fail to predict the 3-D effect of mean flow on the turbulence (e.g. decrease in the shear stress caused by the cross flow in the boundary layer). The newly developed second order near-wall turbulence model is described and is capable of capturing the near-wall behavior of turbulence as well as the effect of 3-D mean flow on the turbulence.

Shih, T.-H.↗
NASA NTRS1994

Development of pneumatic test techniques for subsonic high-lift and in-ground-effect wind tunnel investigations

Wind tunnel evaluations of two-dimensional high-lift airfoils and of vehicles operating in ground effect near the tunnel floor require special test facilities and procedures. These are needed to avoid errors caused by proximity to the walls and interference from the wall boundary layers. Pneumatic test techniques and facilities were developed for GTRI aerodynamic research tunnels and calibrated to verify that these wall effects had been removed. The modified facilities were then employed to evaluate the aerodynamic characteristics of blown very-high-lift airfoils and of racing hydroplanes operating in ground effect at various levels above the floor. The pneumatic facilities, techniques and calibrations are discussed and typical aerodynamic data recorded both with and without the test-section blowing systems are presented.

Englar, Robert J.↗
DOE OSTI2019

Atomic layer etching with pulsed plasmas

A system and method for rapid atomic layer etching (ALET) including a pulsed plasma source, with a spiral coil electrode, a cooled Faraday shield, a counter electrode disposed at the top of the tube, a gas inlet and a reaction chamber including a substrate support and a boundary electrode. The method includes positioning an etchable substrate in a plasma etching chamber, forming a product layer on the surface of the substrate, removing a portion of the product layer by pulsing a plasma source, then repeating the steps of forming a product layer and removing a portion of the product layer to form an etched substrate.

Donnelly, Jr., Vincent M.↗
NASA NTRS1993

Electrodialysis simulation to achieve optimum current density

Electrodialysis is used to remove salts from waste or other water streams, to yield a concentrated brine and a substatially deionized product water. During the electrodialysis process, the boundary layer adjacent to the ion selective membrane can become depleted of ions, resulting in severe pH changes sometimes accompanied by precipitation, and power losses, by a process known as water splitting. In order to optimize the applied electric current density, to achieve maximum deionization without exceeding the limiting current at any point along the path, a simulation program has been created to plot ion concentrations and fluxes, and cell current densities and voltages along the electrodialysis path. A means for tapering the current density along the path is recommended.

Herrmann, Cal C.↗
NASA NTRS2011

Assessment of CFD Hypersonic Turbulent Heating Rates for Space Shuttle Orbiter

Turbulent CFD codes are assessed for the prediction of convective heat transfer rates at turbulent, hypersonic conditions. Algebraic turbulence models are used within the DPLR and LAURA CFD codes. The benchmark heat transfer rates are derived from thermocouple measurements of the Space Shuttle orbiter Discovery windward tiles during the STS-119 and STS-128 entries. The thermocouples were located underneath the reaction-cured glass coating on the thermal protection tiles. Boundary layer transition flight experiments conducted during both of those entries promoted turbulent flow at unusually high Mach numbers, with the present analysis considering Mach 10{15. Similar prior comparisons of CFD predictions directly to the flight temperature measurements were unsatisfactory, showing diverging trends between prediction and measurement for Mach numbers greater than 11. In the prior work, surface temperatures and convective heat transfer rates had been assumed to be in radiative equilibrium. The present work employs a one-dimensional time-accurate conduction analysis to relate measured temperatures to surface heat transfer rates, removing heat soak lag from the flight data, in order to better assess the predictive accuracy of the numerical models. The turbulent CFD shows good agreement for turbulent fuselage flow up to Mach 13. But on the wing in the wake of the boundary layer trip, the inclusion of tile conduction effects does not explain the prior observed discrepancy in trends between simulation and experiment; the flight heat transfer measurements are roughly constant over Mach 11-15, versus an increasing trend with Mach number from the CFD.

Wood, William A.↗
DOE OSTI2020

Evaluation of an Improved Convective Triggering Function: Observational Evidence and SCM Tests

This study provides a strong observational support for a recently developed convective triggering function that uses the large-scale dynamic convective available potential energy (dCAPE) as a constraint combined with an unrestricted air parcel launch level (ULL) to relax the unrealistic strong coupling of convection to surface heating and capture nocturnal elevated convection. Both case study and statistical analysis are conducted using the observations collected from the Department of Energy (DOE)'s Atmospheric Radiation Measurement (ARM) program at its Southern Great Plains (SGP) and Manaus (MAO) sites. They show that dCAPE has a much stronger correlation with precipitation than CAPE and ULL is essential to detect elevated convection above boundary layer under both midlatitude and tropical conditions and for both afternoon and nighttime deep convection regimes. Sensitivity tests with the single-column model (SCM) of DOE's Energy Exascale and Earth System Model (E3SM) indicate that the role of dCAPE in suppressing daytime convection is more effective for tropical convection than midlatitude convection. Even though the dCAPE can suppress the overestimated convection, ULL plays a much bigger role in improving the diurnal cycle of precipitation than dCAPE. It not only helps capture nocturnal elevated convection, but also significantly removes the spurious morning precipitation seen in the default model, due to the release of unstable energy at night. However, the use of ULL has led to an overestimation of light-to-moderate precipitation (1-10 mm/day) due to more convection being triggered above boundary layer.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

Investigation of Materials for Boundary Layer Control in a Supersonic Wind Tunnel

During operation of the NASA Glenn Research Center 15- by 15-Centimeter Supersonic Wind Tunnel (SWT), a significant, undesirable corner flow separation is created by the three-dimensional interaction of the wall and floor boundary layers in the tunnel corners following an oblique-shock/ boundary-layer interaction. A method to minimize this effect was conceived by connecting the wall and floor boundary layers with a radius of curvature in the corners. The results and observations of a trade study to determine the effectiveness of candidate materials for creating the radius of curvature in the SWT are presented. The experiments in the study focus on the formation of corner fillets of four different radii of curvature, 6.35 mm (0.25 in.), 9.525 mm (0.375 in.), 12.7 mm (0.5 in.), and 15.875 mm (0.625 in.), based on the observed boundary layer thickness of 11.43 mm (0.45 in.). Tests were performed on ten candidate materials to determine shrinkage, surface roughness, cure time, ease of application and removal, adhesion, eccentricity, formability, and repeatability. Of the ten materials, the four materials which exhibited characteristics most promising for effective use were the heavy body and regular type dental impression materials, the basic sculpting epoxy, and the polyurethane sealant. Of these, the particular material which was most effective, the heavy body dental impression material, was tested in the SWT in Mach 2 flow, and was observed to satisfy all requirements for use in creating the corner fillets in the upcoming experiments on shock-wave/boundary-layer interaction.

Braafladt, Alexander↗
NASA NTRS2009

Integrated High Payoff Rocket Propulsion Technology (IHPRPT) SiC Recession Model

SiC stability and recession rates were modeled in hydrogen/oxygen combustion environments for the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) program. The IHPRPT program is a government and industry program to improve U.S. rocket propulsion systems. Within this program SiC-based ceramic matrix composites are being considered for transpiration cooled injector faceplates or rocket engine thrust chamber liners. Material testing under conditions representative of these environments was conducted at the NASA Glenn Research Center, Cell 22. For the study described herein, SiC degradation was modeled under these Cell 22 test conditions for comparison to actual test results: molar mixture ratio, MR (O2:H2) = 6, material temperatures to 1700 C, combustion gas pressures between 0.34 and 2.10 atm, and gas velocities between 8,000 and 12,000 fps. Recession was calculated assuming rates were controlled by volatility of thermally grown silica limited by gas boundary layer transport. Assumptions for use of this model were explored, including the presence of silica on the SiC surface, laminar gas boundary layer limited volatility, and accuracy of thermochemical data for volatile Si-O-H species. Recession rates were calculated as a function of temperature. It was found that at 1700 C, the highest temperature considered, the calculated recession rates were negligible, about 200 m/h, relative to the expected lifetime of the material. Results compared favorably to testing observations. Other mechanisms contributing to SiC recession are briefly described including consumption of underlying carbon and pitting. A simple expression for liquid flow on the material surface was developed from a one-dimensional treatment of the Navier-Stokes Equation. This relationship is useful to determine under which conditions glassy coatings or thermally grown silica would flow on the material surface, removing protective layers by shear forces. The velocity of liquid flow was found to depend on the gas velocity, the viscosity of gas and liquid, as well as the thickness of the gas boundary layer and the liquid layer. Calculated flow rates of a borosilicate glass coating compared well to flow rates observed for this coating tested on a SiC panel in Cell 22.

Opila, E. J.↗
NASA NTRS1989

A magnetohydrodynamical model of the inner coma of Comet Halley

The magnetometer onboard the Giotto spacecraft observed a diamagnetic cavity surrounding the nucleus of Comet Halley. The location of the boundary of this diamagnetic cavity is determined by a balance between an inward magnetic pressure gradient force and an outward ion-neutral drag force, associated with collisions between the outwardly flowing neutrals and the stagnated ions. A one-dimensional time-dependent MHD model has been developed for the inner coma of Comet Halley, and includes ion-neutral collisions, photochemical production and loss of plasma, and finite conductivity. This model is used to investigate the plasma dynamics in the vicinity of the diamagnetic cavity boundary surface. A narrow transition layer with enhanced plasma density is shown to exist just inside the boundary, although a full understanding of this layer will require a two- or three-dimensional MHD model. The flux of cometary ions into this shocklike layer is removed by electron-ion recombination. The thickness of this layer is determined by the Mach number of the incident flow.

Cravens, T. E.↗
NASA NTRS2018

Wintertime Overnight NOx Removal in a Southeastern United States Coal-Fired Power Plant Plume: A Model for Understanding Winter NOx Processing and Its Implications

Nitric oxide (NO) is emitted in large quantities from coal-burning power plants. During the day, the plumes from these sources are efficiently mixed into the boundary layer, while at night, they may remain concentrated due to limited vertical mixing during which they undergo horizontal fanning. At night, the degree to which NO is converted to HNO3 and therefore unable to participate in next-day ozone (O3) formation depends on the mixing rate of the plume, the composition of power plant emissions, and the composition of the background atmosphere. In this study, we use observed plume intercepts from the Wintertime INvestigation of Transport, Emissions and Reactivity (WINTER) campaign to test sensitivity of overnight NOx removal to the N2O5 loss rate constant, plume mixing rate, background O3, and background levels of volatile organic compounds using a 2-D box model of power plant plume transport and chemistry. The factor that exerted the greatest control over NOx removal was the loss rate constant of N2O5. At the lowest observed N2O5 loss rate constant, no other combination of conditions converts more than 10 percent of the initial NOx to HNO3. The other factors did not influence NOx removal to the same degree.

air quality↗
NASA NTRS2006

Wire-Mesh-Based Sorber for Removing Contaminants from Air

A paper discusses an experimental regenerable sorber for removing CO2 and trace components principally, volatile organic compounds, halocarbons, and NH3 from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to activated-carbon and zeolite-pellet sorbent beds now in use. The regenerable sorber consists mainly of an assembly of commercially available meshes that have been coated with a specially-formulated washcoat containing zeolites. The zeolites act as the sorbents while the meshes support the zeolite-containing washcoat in a configuration that affords highly effective surface area for exposing the sorbents to flowing air. The meshes also define flow paths characterized by short channel lengths to prevent excessive buildup of flow boundary layers. Flow boundary layer resistance is undesired because it can impede mass and heat transfer. The total weight and volume comparison versus the atmosphere revitalization equipment used onboard the International Space Station for CO2 and trace-component removal will depend upon the design details of the final embodiment. However, the integrated mesh-based CO2 and trace-contaminant removal system is expected to provide overall weight and volume savings by eliminating most of the trace-contaminant control equipment presently used in parallel processing schemes traditionally used for spacecraft. The mesh-based sorbent media enables integrating the two processes within a compact package. For the purpose of regeneration, the sorber can be heated by passing electric currents through the metallic meshes combined with exposure to space vacuum. The minimal thermal mass of the meshes offers the potential for reduced regeneration-power requirements and cycle time required for regeneration compared to regenerable sorption processes now in use.

Perry, Jay↗
NASA NTRS1989

Numerical investigation of an internal layer in turbulent flow over a curved hill

The development of an internal layer in a turbulent boundary layer flow over a curved hill is investigated numerically. The turbulence field of the boundary layer flow over the curved hill is compared with that of a turbulent flow over a symmetric airfoil (which has the same geometry as the curved hill except that the leading and trailing edge plates were removed) to study the influence of the strongly curved surface on the turbulence field. The turbulent flow equations are solved by a control-volume based finite difference method. The turbulence is described by a multiple-time-scale turbulence model supplemented with a near-wall turbulence model. Computational results for the mean flow field (pressure distributions on the walls, wall shearing stresses and mean velocity profiles), the turbulence structure (Reynolds stress and turbulent kinetic energy profiles), and the integral parameters (displacement and momentum thicknesses) compared favorably with the measured data. Computational results show that the internal layer is a strong turbulence field which is developed beneath the external boundary layer and is located very close to the wall. Development of the internal layer was more obviously observed in the Reynolds stress profiles and in the turbulent kinetic energy profiles than in the mean velocity profiles. In this regard, the internal layers is significantly different from wall-bounded simple shear layers in which the mean velocity profile characterizes the boundary layer most distinguishably. Development of such an internal layer, characterized by an intense turbulence field, is attributed to the enormous mean flow strain rate caused by the streamline curvature and the strong pressure gradient. In the turbulent flow over the curved hill, the internal layer begin to form near the forward corner of the hill, merges with the external boundary layer, and develops into a new fully turbulent boundary layer as the fluid flows in the downstream direction. For the flow over the symmetric airfoil, the boundary layer began to form from almost the same location as that of the curved hill, grew in its strength, and formed a fully turbulent boundary layer from mid-part of the airfoil and in the downstream region. Computational results also show that the detailed turbulence structure in the region very close to the wall of the curved hill is almost the same as that of the airfoil in most of the curved regions except near the leading edge. Thus the internal layer of the curved hill and the boundary layer of the airfoil were also almost the same. Development of the wall shearing stress and separation of the boundary layer at the rear end of the curved hill mostly depends on the internal layer and is only slightly influenced by the external boundary layer flow.

Kim, S-W.↗
NASA NTRS1968

Vacuum probe sampler removes micron-sized particles from surfaces

Vacuum probe sampler removes micron-sized particles from sensitive surfaces, without damage to the surface. The probe has a critical orifice to ensure an optimum airflow rate that disturbs the boundary layer of air and raises bacteria from the surface into the probe with the moving air stream.

Whitfield, W. J.↗
NASA NTRS2000

Airborne Sunphotometer, Airborne in-situ, Space-borne, and Ground-Based Measurements of Troposoheric Aerosol in Ace-2

We report on clear-sky column closure experiments performed in the Canary Islands during the second Aerosol Characterization Experiment (ACE-2) in June/July 1997. We present results obtained by combining airborne sunphotometer and in-situ aerosol measurements taken aboard the Pelican aircraft, space-borne NOAA/AVHRR data and ground-based lidars A wide range of aerosol types was encountered throughout the ACE-2 area, including background Atlantic marine, European pollution-derived, and African mineral dust. During !he two days discussed here, vertical profiles flown in cloud free air masses revealed three distinctly different layers: a marine boundary layer (MBL) with varying pollution levels, an elevated dust layer, and a very clean layer between the MBL and the dust layer. We found that the presence of the elevated dust layer removes the good agreement between satellite and sunphotometer AOD usually found in the absence of the dust layer. Using size-resolved composition information we have computed optical properties of the ambient aerosol from the in-situ measurements and subsequently compared those to the sunphotometer results. In the dust, the agreement in layer aerosol optical depth (380-1060 nm) is 3-8%. In the MBL there is tendency for the in-situ results to be slightly lower than the sunphotometer measurements (10-17% at 525 nm), but these differences are within the combined error bars of the measurements and computations.

Schmid, Beat↗