Search NASA⌕ Search

SEARCH · Search NASA

Results for “Body Patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Stresses from arbitrary loads on a circular crack

An inclusive theory is developed for stresses and displacements due to arbitrarily distributed normal and tangential loads acting on a circular crack in an infinite body. The representation chosen for the boundary conditions leads to solutions expressed as series of Bessel-function integrals of a class quite susceptible to further analysis and to rapid evaluation on modern computers. The load coefficients which appear in all the solution series bear intelligible interpretation, and stress intensity factors are related to them by simple formulas. The inclusiveness and tractability of the solutions qualify this theory to be a useful part of analyses for cracks in finite bodies in which the effective crack loads can assume many patterns.

Bell, J. C.↗

Sweating responses during heat acclimation and moderate conditioning

Experiments were conducted on ten young male subjects to determine sweating onset, distribution, and patterns as well as the relationships of these responses to body temperature during heat acclimation and moderate conditioning performed in temperate (24 C) conditions. The subjects are randomly assigned to two groups of five subjects each. The experimental period consisted of eight successive days of either graded exercise to exhaustion on a bicycle ergometer in heat (acclimation group) or in a temperate environment (control group). Major conclusions are that (1) acclimation and conditioning result in relatively more sweat rate on the limbs than on the torso, but that these changes are less related to body temperature than torso sweat rate; and (2) sweating sensitivity increases during acclimation and conditioning, but its contribution to heat acclimation is minor.

Shvartz, E.↗

Leiomodin and tropomodulin in smooth muscle

Evidence is accumulating to suggest that actin filament remodeling is critical for smooth muscle contraction, which implicates actin filament ends as important sites for regulation of contraction. Tropomodulin (Tmod) and smooth muscle leiomodin (SM-Lmod) have been found in many tissues containing smooth muscle by protein immunoblot and immunofluorescence microscopy. Both proteins cofractionate with tropomyosin in the Triton-insoluble cytoskeleton of rabbit stomach smooth muscle and are solubilized by high salt. SM-Lmod binds muscle tropomyosin, a biochemical activity characteristic of Tmod proteins. SM-Lmod staining is present along the length of actin filaments in rat intestinal smooth muscle, while Tmod stains in a punctate pattern distinct from that of actin filaments or the dense body marker alpha-actinin. After smooth muscle is hypercontracted by treatment with 10 mM Ca(2+), both SM-Lmod and Tmod are found near alpha-actinin at the periphery of actin-rich contraction bands. These data suggest that SM-Lmod is a novel component of the smooth muscle actin cytoskeleton and, furthermore, that the pointed ends of actin filaments in smooth muscle may be capped by Tmod in localized clusters.

Carrier Proteins/analysis/genetics/metabolism↗

Design Optimization of Energized Composite Using Simulation and Experimental Methods

As electric vehicles (EVs) are evolving, innovative technologies like “energized composite” that can store energy in the car's body helps extend its range per charge. The composite's unique ability to function as both structural body panel and charge storage medium stems from its unique pattern design between “electrochemical areas (EcA)” and “epoxy area (EpA)”. Herein, a design optimization study is presented to obtain a balanced ratio between EcA versus EpA to maximize the charge storage ability of the composite while maintaining a decent tensile and bending strength. Simulations using ANSYS software and experimental confirmation using universal testing machines and electrochemical analyzers are used to derive optimum ratios between EcA and EpA. Uniaxial tension test and 3-point bend test have been performed to optimize the tensile and bend strengths, whereas cyclic voltammetry, galvanic charge–discharge, and electrochemical impedance spectroscopy are used to determine the electrochemical performance of various design configurations by modulating the ratios of EcA versus EpA. Overall, the highest achieved energy storage per lamina is 2531 mWh m−2 for a maximum of 81.6% EcA with a tensile strength of 417.73 MPa and bending strength of 263.13 MPa. This study is highly beneficial for EVs and aerospace applications.

energy storage↗

Patterns of fracture and tidal stresses due to nonsynchronous rotation - Implications for fracturing on Europa

This study considers the global patterns of fracture that would result from nonsynchronous rotation of a tidally distorted planetary body. The incremental horizontal stresses in a thin elastic or viscous shell due to a small displacement of the axis of maximum tidal elongation are derived, and the resulting stress distributions are applied to interpret the observed pattern of fracture lineaments on Europa. The observed pattern of lineaments can be explained by nonsynchronous rotation if these features formed by tension fracturing and dike emplacement. Tension fracturing can occur for a small displacement of the tidal axis, so that the resulting lineaments may be consistent with other evidence suggesting a young age for the surface.

Helfenstein, P.↗

A study of morphology, provenance, and movement of desert sand seas in Africa, Asia, and Australia

The author has identified the following significant results. The assembling of photomosaics from color prints of ERTS images has made possible the recognition and description of san patterns, and these are to be the basis of a worldwide classification of sand bodies. Progress has been as rapid as the acquisition of the bulk composite images will permit and for some areas the mosaics are now nearly complete. A second step, which consists of the accumulation and analysis of regional wind data, to be plotted as overlays for the dune patterns, is now underway and should soon give tangible results. Other aspects of the project include the gathering of ground truth in the form of air photographs, needed to interpret geomorphic forms and the sampling of sand deposits for analyzing the texture and composition of sand bodies. A start has been made on these studies in several selected areas.

Mckee, E. D.↗

The IR properties of ringed galaxies and the IRAS database

Our study of the Infrared Astronomy Satellite (IRAS) properties of ringed galaxies has been largely successful. We have identified what we think is the probable cause of the differences in the IRAS properties among non-interacting barred galaxies as the pattern speed of the bar. The key to identifying this parameter has been our focusing the study on outer-ringed galaxies where we know precisely what is present in the central regions (from available BVI CCD images in our library of images). The theory is that outer rings, through their morphology and other characteristics, can be identified with the outer Lindblad resonance, one of the major resonances in galaxy structure. Using a library of n-body simulations for comparison, we can reliably infer both low and high pattern speed galaxies from the appearance of outer rings and the existence of other ring features. It is clear that in some barred galaxies, the bar pattern speed is high enough to avoid an inner Lindblad resonance, hence such objects do not contain nuclear or circumnuclear star formation. The IRAS observations are most sensitive to nuclear star formation in early-type barred galaxies, and will thus select those barred galaxies where the pattern speed is low enough to allow an inner Lindblad resonance to exist. High pattern speed barred galaxies therefore weaken the correlation between bars and infrared excess. This finding helps to reconcile the inconsistent results found between different studies on the correlation between bars and far-IR emission.

Buta, Ronald J.↗

Differences in Femoral Geometry and Structure Due to Immobilization

Reduction in bone mass of the lower extremity is well documented in individuals with paralysis resulting from spinal cord injury (SCI). The consequent osteopenia leads to elevated fracture risk with fractures occurring more commonly in the femoral shaft and supracondylar regions than the hip. A model has recently been described to estimate geometry and structure of the femoral midshaft from whole body scans by dual X-ray absorptiometry (DXA). Increases in femoral geometric and structural properties during growth were primarily related to mechanical loading as reflected by body mass. In this study, we investigate the relationship between body mass and femoral geometry and structure in adults with normal habitual mechanical loading patterns and those with severely reduced loading. The subjects were 78 ambulatory men (aged 20-72 yrs) and 113 men with complete paralysis from SCI of more than 4 years duration (aged 21 73 yrs). Subregional analysis was performed on DXA whole body scans to obtain bone mineral content (BMC, g), cortical thickness (cm), crosssectional moment of inertia (CSMI, cm4), and section modulus (cm3) of the femoral midshaft. All measured bone variables were significantly lower in SCI compared with ambulatory subjects: -29% (BMC), -33% (cortical thickness), -23% (CSMI), and -22% (section modulus) while body mass was not significantly different. However, the associations between body mass and bone properties were notably different; r2 values were higher for ambulatory than SCI subjects in regressions of body mass on BMC (0.48 vs 0.20), CSMI (0.59 vs 0.32), and section modulus (0.59 vs 0.31). No association was seen between body mass and cortical thickness for either group. The greatest difference between groups is in the femoral cortex, consistent with reduced bone mass via endosteal expansion. The relatively lesser difference in geometric and structural properties implies that there is less effect on mechanical integrity than would be expected from bone mass results alone. The reduced association in SCI subjects between body mass and bone properties is not unexpected. Although mean body mass differs little between ambulatory and SCI individuals, the association between body mass and in vivo skeletal loading is no longer present, as mechanical influences are removed except for transfer activities. The residual association is probably attributable to the strength of this influence during growth. These results highlight the importance of examining geometry and structure in conjunction with bone mass.

Kiratli, Beatrice Jenny↗

Microgravity two-phase fluid flow pattern modeling

When gas and liquid mixtures flow in a pipe, the distribution of the two phases may take many forms. A flow pattern, or flow regime, is the characteristic spatial distribution of the phases of flow in a pipe. Because heat transfer and pressure drop are dependent on the characteristic distribution of phases, it is necessary to describe flow patterns in an appropriate manner so that a hydrodynamic or heat transfer theory applicable to that can be chosen. A theoretical two phase flow regime transition map under a microgravity environment was developed on physical concepts. These transitions use four basic flow patterns: dispersed flow, slug flow, stratified flow, and annular flow. The forces considered are body force, surface tension force, inertial force, friction, and the force from eddy turbulent fluctuation. Three dimensionless parameters were developed. Because these transition boundaries were developed based on physical concepts, they should be applicable to flow regimes occurring in various design conditions. Because the flow pattern data from KC-135 experiments are insufficient to verify these theoretical transition lines completely, an adiabatic experiment for flow regime analysis is recommended.

Lee, Doojeong↗

Dynamic mixing in magma bodies - Theory, simulations, and implications

The magma-mixing process is different from the mantle mixing process in that the mixing components of magma are dynamically active, with the melt density depending strongly on composition. This paper describes simulations of time-dependent variable-viscosity double-diffusive convection which were carried out to investigate quantitatively the mixing dynamics of magma in melt-dominated magma bodies. Results show that the dynamics of double-diffusive convection can impart complex patterns of composition, through time and space. The mixing time depends nonlinearly on many factors, including heat flux driving convection, the rate of diffusion of chemical species, the relative importance of thermal and chemical buoyancy, the viscosities of the mixing components, and the shape of the magma body.

Oldenburg, Curtis M.↗

A numerical investigation of crossflow separation on a three-caliber tangent ogive-cylinder

A parabolized Navier-Stokes code was used to calculate laminar crossflow separation on a simple body of revolution. Convergence lines were defined as lines on which skin-friction lines converge and were visually determined from the computed skin-friction patterns. These convergence lines were shown to be limit lines and not envelopes. Examination of crossflow cuts of streamtubes which encircled the body indicated that crossflow separation (defined by a fold in the streamtube) began after the onset of negative crossflow velocities but before a convergence line could be determined from the skin-friction patterns. There were no rapid changes or extrema in the pressure, skin-friction, vorticity, or flow-angle distributions that indicated where separation occurred. Instead, crossflow separation developed gradually and involved an extended region of the surface.

Yates, Leslie A.↗

Stabilizing influence of earth perturbations on polar lunar orbiters

A class of highly inclined lunar orbits is discussed for which earth perturbations have significant influence on the orbit evolution and the usefulness of the orbit for scientific exploration. The theory of the long-term motion of particles under third-body and zonal harmonic perturbations is taken as a starting point for investigations of orbits with relatively long lifetimes and evolutionary patterns that enhance the effectiveness of the satellite as a lunar farside relay. An equilibrium solution in the doubly-averaged three-body problem with oblateness is identified and the results of some numerical integrations are presented.

Uphoff, C.↗

Interpretation of satellite-observed thunderstorm anvil structure

The radiative characteristics of an anvil plume sensed by satellite radiometers are studied to discern the reason for an observed 'V' pattern of colder temperatures and a corresponding internal warm region. The measured black body temperature is affected by the ice water content and particle distributions in the cloud layer. Attention is given to 'V' anvil structure examined by Haynesfield et al. (1979). The GOES satellite IR data are treated with a plane parallel geometric radiative transfer model and a particle trajectory model is used to simulate ice particle concentrations downwind from a strongly divergent cloud top. Output from the two models indicate the 'V' pattern arises from divergence in the storm anvil. The particle concentration was elevated within the V-shaped region, causing lower temperatures in the V arms. The V is produced by strong upper level flow as well as strong mass and moisture divergence in the storm outflow.

Heymsfield, G. M.↗

Sinusoidal reaction formulation for radiation and scattering from conducting surfaces

A piecewise-sinusoidal reaction technique is developed for scattering and radiation from perfectly conducting bodies of arbitrary shape. The theory and numerical results for scattering patterns of rectangular plates and radiation patterns of corner-reflector antennas are presented. Experimental measurements are included for comparison with the calculated data.

Richmond, J. H.↗

Dynamic Moire Methods for Detection of Loosened Space Shuttle Tiles

Moire fringe methods for detecting loose space shuttle tiles were investigated with a test panel consisting of a loose tile surrounded by four securely bonded tiles. The test panel was excited from 20 to 150 Hz with in-plane sinusoidal acceleration of 2 g (peak). If the shuttle orbiter can be subjected to periodic excitation of 1 to 2 g (peak) and rigid-body periodic displacements do not mask the change in the Moire pattern due to tile looseness, then the use of projected Moire fringes to detect out-of-plane rockin appears to be the most viable indicator of tile looseness since no modifications to the tiles are required.

Snow, W. L.↗

Microyield Stress in Composite Materials

New interferometric method for measuring microyield stress faster and more accurate than previous strain-gage method. Multiple laser beams reflected from corner-cube reflectors arranged in triangular patterns yielding data sufficient to separate length changes from rigid-body motion and bending.

Mcmahan, L.↗

Negative Selection Algorithm for Aircraft Fault Detection

We investigated a real-valued Negative Selection Algorithm (NSA) for fault detection in man-in-the-loop aircraft operation. The detection algorithm uses body-axes angular rate sensory data exhibiting the normal flight behavior patterns, to generate probabilistically a set of fault detectors that can detect any abnormalities (including faults and damages) in the behavior pattern of the aircraft flight. We performed experiments with datasets (collected under normal and various simulated failure conditions) using the NASA Ames man-in-the-loop high-fidelity C-17 flight simulator. The paper provides results of experiments with different datasets representing various failure conditions.

Dasgupta, D.↗