Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bubble dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

In-situ irradiation of uranium carbide

Uranium carbide (UC) is a leading candidate fuel for Generation IV reactors due to its high uranium density and thermal conductivity. However, its irradiation performance—particularly gas bubble swelling and defect dynamics—remains poorly characterized. Using in-situ transmission electron microscopy (TEM), we irradiated UC with 300 keV Xe + and 1 MeV Kr 2+ ions at temperatures up to 900 °C to quantify swelling behavior and dislocation loop evolution. The swelling remained below 0.6 % across all temperatures, suggesting the dimensional stability of UC under irradiation at these temperatures. Dislocation loops grew faster in UC than in UO 2 or UN, correlating with its lower homologous temperature. Notably, nanograin structures emerged in thin regions of the lamellar, mirroring phenomena previously observed in UO 2 and ZrC. These results address critical knowledge gaps in the radiation tolerance of UC and provide insight into its suitability for advanced reactor systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Long-lived oscillations of metastable states in neutral atom systems

Metastable states arise in a range of quantum systems and can be observed in various dynamical scenarios, including decay, bubble nucleation, and long-lived oscillations. The phenomenology of metastable states has been examined in quantum many-body systems, notably in one-dimensional (1D) ferromagnetic Ising spin systems and superfluids. Here, in this paper, we study long-lived oscillations of metastable and ground states in 1D antiferromagnetic neutral atom chains with long-range Rydberg interactions. We use a staggered local detuning field to achieve confinement. Using theoretical and numerical models, we identify novel spectral signatures of quasiparticle oscillations distinct to antiferromagnetic neutral atom systems and interpret them using a classical energy model of short-range meson repulsion. Finally, we evaluate the experimental accessibility of our proposed setup on current neutral-Atom platforms and discuss experimental feasibility and constraints.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probability of Decompression Sickness and Venous Gas Emboli from 49 NASA Hypobaric Chamber Tests with Reference to Exploration Atmosphere

Introduction: Decompression sickness (DCS) is a complex biophysical event; it combines human perception of pain, for instance, and the presence of a gas phase in the tissues. Living tissues are complex and dynamic. Micronuclei and later bubbles may or may not form given what appears to be the same conditions. Even when bubbles grow, symptoms may or may not develop under what appears to be the same conditions. Therefore, at this time it is appropriate to consider DCS as a probabilistic rather than a deterministic event. Methods: Probabilistic models about hypobaric DCS and venous gas emboli (VGE) require a large amount of quality research data, a definition of decompression dose using physical and physiologic variables, and a flexible analytical approach that can quantify the association between each outcome and all covariates of interest (assuming independence between DCS and VGE) and then ultimately be extended to acknowledge dependencies between DCS and VGE. Our DCS and VGE data are from 1,031 hypobaric decompressions from 1983 to 2016. A total of 577 humans participated in 49 hypobaric chamber tests to evaluate denitrogenation procedures used by astronauts in the Space Shuttle and International Space Station programs. We defined decompression dose as the ratio of computed nitrogen tension in a theoretical 360-minute half-time compartment to ambient pressure, which accounts for denitrogenation and exposure pressure as well as explanatory variables such as age, sex, body mass index, and the presence or absence of ambulation as part of exercise at the exposure pressure. A parametric survival model, using a log-logistic distribution, was used to quantify the time to development of DCS, VGE, and Grade IV VGE. Results: Our survival estimates are applicable to simple hypobaric decompressions, such as depressurizations in 5 to 30 minutes to exposure pressures between 4 and 10 pounds per square inch absolute (psia) and after minutes to hours of denitrogenation, either under resting or exercise conditions to accelerated denitrogenation. The regressions are applicable to exposures between 2 to 6 hours and under conditions of ambulation or no ambulation as part of exercise at the test pressure. We estimate that an exposure to 4.3 psia with simulated extravehicular activity (EVA) that includes ambulation after equilibration to the exploration atmosphere at 8.2 psia with a 34% oxygen atmosphere will result in 3.1% DCS (1.8% to 5.2 95% confidence interval), 23.2% VGE (16.7 to 31.2%), and 8.5% Grade IV VGE (4.7 to 14.7%) in equal samples of men and women exposed for 6 hours. Discussion: Probabilistic models for DCS, VGE, and Grade IV VGE can be used to inform those that plan future EVAs. Their applications are useful to quantify the risk of DCS and VGE in astronauts that perform EVAs in low-pressure space suits while in space or while exploring the surfaces of the moon or Mars.

Johnny Conkin↗

Dynamics of Aqueous Foam Drops

We develop a model for the nonlinear oscillations of spherical drops composed of aqueous foam. Beginning with a simple mixture law, and utilizing a mass-conserving bubble-in-cell scheme, we obtain a Rayleigh-Plesset-like equation for the dynamics of bubbles in a foam mixture. The dispersion relation for sound waves in a bubbly liquid is then coupled with a normal modes expansion to derive expressions for the frequencies of eigenmodal oscillations. These eigenmodal (breathing plus higher-order shape modes) frequencies are elicited as a function of the void fraction of the foam. A Mathieu-like equation is obtained for the dynamics of the higher-order shape modes and their parametric coupling to the breathing mode. The proposed model is used to explain recently obtained experimental data.

Akhatov, Iskander↗

The effect of composition on helium bubble nucleation in complex concentrated alloys

Molecular dynamics simulations of helium implantation have been performed in the MoNbTaTi complex concentrated alloy (CCA) to determine the impact of composition on helium clustering and bubble nucleation. It was found that compositions with lower interstitial atomic volume resulted in smaller cluster sizes, higher helium-to-vacancy ratios, and larger migration barriers. As the atomic volume decreases, it is harder to accommodate additional helium in the lattice and for helium to diffuse between interstitial sites, resulting in smaller cluster sizes. In particular, increasing molybdenum directly correlated with a decreased interstitial atomic volume and increased migration barrier. Niobium exhibited the opposite trend, where more niobium in the material resulted in larger interstitial atomic volumes and cluster sizes but lower migration barriers. The atomic volume was determined to be an indicator of the susceptibility of the material to helium bubble growth and could potentially be used as a metric to screen compositions for resistance to helium damage. In this way, properties such as available interstitial volumes could be used to screen materials more rapidly given the vast compositional space of CCAs.

McCarthy, Megan Jeanne [Sandia National Laboratori↗

Predicting critical heat flux using localized sensing at invisible vapor-liquid interfaces

Predicting critical heat flux (CHF) in two-phase electronics cooling systems remains a significant challenge due to the sudden onset of boiling crisis and the difficulty in directly visualizing vapor-liquid interfaces. Existing sensing methods rely on lagging temperature measurements, optically accessible systems, or spatially averaged signals that cannot pinpoint CHF initiation at localized high-heat-flux regions. Here, we report a planar capacitive sensing approach that enables real-time, localized detection of vapor-liquid interface dynamics for CHF prediction in boiling heat transfer. The capacitive sensor exploits the dielectric constant difference between liquid and vapor phases to capture bubble nucleation, growth, and departure dynamics with a temporal resolution down to 2 ms. The capacitive sensing reveals distinct signals across boiling regimes: from high-frequency fluctuations during strong nucleate boiling to low-frequency fluctuations with increased amplitudes when approaching CHF. The multi-sensor array experiments demonstrate real-time localized sensing, where each sensor responds exclusively to boiling in its immediate vicinity without crosstalk from neighboring regions. This non-intrusive sensing approach provides predictive rather than lagging sensing signals of CHF occurrence, offering predictive diagnosis of two-phase liquid cooling for the thermal management of high-power-density electronics.

CHF↗

Water masers in W49N - The youngest stellar jet?

Observations by Gwinn et al. (1992) of the proper motions of water masers in W49N show that they have an elongated distribution expanding from a common center. Features with high space velocity only occur far from the center, while low-velocity features occur at all distances. It is proposed that water masers in star-forming regions occur in expanding shells swept up by high-velocity winds from young, massive stars during the early phases of the expansion. In W49N, confinement of the bubble by a density distribution with an axial cavity can explain both the velocity field and the shape of the maser distribution. A fully dynamical calculation of the expanding bubble is presented which provides a satisfactory fit for the observations and suggests that this system is only about 250 yr old. Thus these observations may show the very first stages of the formation of a jet from a young stellar object.

Mac Low, MORDECAI-M.↗

Dynamics of surface tension in microgravity environment

Time-dependent evolutions of the profile of free surface (bubble shapes) for a cylindrical container partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry, in low and microgravity environments, have been studied. Numerical computations of the dynamics of bubble shapes have been carried out (1) linear time-dependent functions of spin-up and spin-down in low and microgravity environments, (2) linear time-dependent functions of increasing and decreasing gravity environment at high and low rotating cylinder speeds, (3) time-dependent step functions of spin-up and spin-down in a low-gravity environment, and (4) sinusoidal function oscillation of the gravity environment at high and low rotating cylinder speeds.

Hung, R. J.↗

Modeling of Vapor Bubble Growth Under Nucleate Boiling Conditions in Reduced Gravity

A dynamic model is developed to describe the evolution of a vapor bubble growing at a nucleation site on a superheated surface under arbitrary gravity. The bubble is separated from the surface by a thin microlayer and grows due to the evaporation from the microlayer interface. The average thickness of the microlayer increases as the bubble expands along the surface if the evaporation rate is lower than some critical value. The corresponding threshold value of the surface temperature has to be associated with the burn-out crisis. Two main reasons make for bubble separation, which are the buoyancy force and a force caused by the vapor momentum that comes to the bubble with vapor molecules. The latter force is somewhat diminished if condensation takes place at the upper bubble surface in subcooled liquids. The action of the said forces is opposed by inertia of the additional mass of liquid as the bubble center rises above the surface and by inertia of liquid being expelled by the growing bubble in radial directions. An extra pressure force arises due to the liquid inflow into the microlayer with a finite velocity. The last force helps in holding the bubble close to the surface during an initial stage of bubble evolution. Two limiting regimes with distinctly different properties can be singled out, depending on which of the forces that favor bubble detachment dominates. Under conditions of moderately reduced gravity, the situation is much the same as in normal gravity, although the bubble detachment volume increases as gravity diminishes. In microgravity, the buoyancy force is negligible. Then the bubble is capable of staying near the surface for a long time, with intensive evaporation from the microlayer. It suggests a drastic change in the physical mechanism of heat removal as gravity falls below a certain sufficiently low level. Inferences of the model and conclusions pertaining to effects caused on heat transfer processes by changes in bubble hydrodynamics induced by gravity are discussed in connection with experimental evidence, both available in current and in as yet unpublished literature.

Buyevich, Yu A.↗

Theoretical modeling of the vapor cavitation in dynamically loaded journal bearings

A theoretical investigation is made of the evolution of a vapor-bubble for a submerged journal bearing under dynamically loaded conditions using the Elrod algorithm. This method conserves mass throughout the computational domain. A comparison study is performed to determine some of the consequences of applying a nonconservative theory (pseudo-Gumbel BC) to a dynamic problem. A complete dynamic cycle of a journal whirling in a circular path is chosen for the basis of comparison. Significant differences are observed in the load components near the end of the cycle. Further, good agreement with experiment is found for stationary and nonstationary cavitation.

Brewe, D. E.↗

Theoretical modeling of the vapor cavitation in dynamically loaded journal bearings

A theoretical investigation is made of the evolution of a vapor-bubble for a submerged journal bearing under dynamically loaded conditions using the Elrod algorithm. This method conserves mass throughout the computational domain. A comparison study is performed to determine some of the consequences of applying a nonconservative theory (pseudo-Gumbel BC) to a dynamic problem. A complete dynamic cycle of a journal whirling in a circular path is chosen for the basis of comparison. Significant differences are observed in the load components near the end of the cycle. Further, good agreement with experiment is found for stationary and nonstationary cavitation.

Brewe, D. E.↗

Time-dependent dynamical behavior of surface tension on rotating fluids under microgravity environment

Time dependent evolutions of the profile of free surface (bubble shapes) for a cylindrical container partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry, have been studied. Numerical computations of the dynamics of bubble shapes have been carried out with the following situations: (1) linear functions of spin-up and spin-down in low and microgravity environments, (2) step functions of spin-up and spin-down in a low gravity environment, and (3) sinusoidal function oscillation of gravity environment in high and low rotating cylinder speeds.

Hung, R. J.↗

Ground-based Characterization of Plant Water Management (PWM) Hydroponic Root Modules for Spaceflight

Hydroponic crop production in space is crucial for long-term space travel but faces numerous challenges – one of which is providing sufficient dissolved oxygen (DO) in nutrient solution. In microgravity environments, surface tension is the primary force acting on liquids, causing water to form into suspended spherical droplets. This can suffocate plants as the liquid clings onto plant roots and the lack of aeration deprives the plant of oxygen needed for growth. To overcome these challenges, plant water management (PWM) systems explore options of growing plants in space autonomously and passively through capillary forces. From 2018-2023, there have been 6 PWM experiments conducted on the ISS. In past experiments conducted in microgravity, bubbles formed in test cells have disrupted fluid dynamics and may adversely affect plant growth. The accumulation of bubbles may lead to inconsistent nutrient delivery, break prime in tubing, and suspend plant roots in air, leading to plant stress and eventually death. Current research efforts focus on the oxygenation capabilities of the PWM system along with a comprehensive sensor array that will improve nutrient and DO monitoring capabilities.

L Wang↗

Real-time simulation of asymmetry generation in fermion-bubble collisions

Motivated by the out-of-equilibrium dynamics during an early-Universe first-order phase transition, we perform real-time simulations of fermion-bubble scattering in 1 + 1 dimensions. This nonequilibrium process can generate a charge-conjugation C asymmetry outside the bubble wall, induced by the complex fermion mass profile. The resulting C asymmetry is the 1 + 1 -dimensional analog of the C P asymmetry in 3 + 1 dimensions, a key ingredient in baryon asymmetry generation at the electroweak scale. Using tensor network methods, we track the real-time evolution of the C asymmetry in the charge density as the fermion interacts with the bubble wall, a regime inaccessible to analytic calculations. We further introduce two observables to quantify the asymmetry in the asymptotic region where reflected particles are well separated from the scattering point: one based on the net charge outside the bubble wall, and the other on the spatial displacement between the reflected particle and antiparticle wave packets. Our study represents a first step toward nonperturbative, real-time computations of C P asymmetry in 3 + 1 dimensions for electroweak baryogenesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two reference time scales for studying the dynamic cavitation of liquid films

Two formulas, one for the characteristic time of filling a void with the vapor of the surrounding liquid, and one of filling the void by diffusion of the dissolved gas in the liquid, are derived. By comparing these time scales with that of the dynamic operation of oil film bearings, it is concluded that the evaporation process is usually fast enough to fill the cavitation bubble with oil vapor; whereas the diffusion process is much too slow for the dissolved air to liberate itself and enter the cavitation bubble. These results imply that the formation of a two phase fluid in dynamically loaded bearings, as often reported in the literature, is caused by air entrainment. They further indicate a way to simplify the treatment of the dynamic problem of bubble evolution.

Sun, D. C.↗

Light Microscopy Module: An On-Orbit Microscope Planned for the Fluids and Combustion Facility on the International Space Station

The Light Microscopy Module (LMM) is planned as a fully remotely controllable on-orbit microscope subrack facility, allowing flexible scheduling and control of fluids and biology experiments within NASA Glenn Research Center's Fluids and Combustion Facility on the International Space Station. Within the Fluids and Combustion Facility, four fluids physics experiments will utilize an instrument built around a light microscope. These experiments are the Constrained Vapor Bubble experiment (Peter C. Wayner of Rensselaer Polytechnic Institute), the Physics of Hard Spheres Experiment-2 (Paul M. Chaikin of Princeton University), the Physics of Colloids in Space-2 experiment (David A. Weitz of Harvard University), and the Low Volume Fraction Colloidal Assembly experiment (Arjun G. Yodh of the University of Pennsylvania). The first experiment investigates heat conductance in microgravity as a function of liquid volume and heat flow rate to determine, in detail, the transport process characteristics in a curved liquid film. The other three experiments investigate various complementary aspects of the nucleation, growth, structure, and properties of colloidal crystals in microgravity and the effects of micromanipulation upon their properties. Key diagnostic capabilities for meeting the science requirements of the four experiments include video microscopy to observe sample features including basic structures and dynamics, interferometry to measure vapor bubble thin film thickness, laser tweezers for colloidal particle manipulation and patterning, confocal microscopy to provide enhanced three-dimensional visualization of colloidal structures, and spectrophotometry to measure colloidal crystal photonic properties.

Doherty, Michael P.↗

LDV measurements in dynamically separated flows

Two component, phase averaged mean velocity data have been obtained with an Laser Doppler Velocimeter (LDV) system, on the upper surface, near the leading edge of an oscillating airfoil undergoing compressible dynamic stall. In particular, the effect of oscillation amplitude has been studied. The results show that at an oscillation amplitude of 10 degrees, a separation bubble forms, that eventually bursts on the upstroke, well beyond the static stall angle. At 2 degrees amplitude, the bubble forms on the upstroke, but dynamic stall occurs on the downstroke. The results reveal new flow physics and the data sets serve as valuable quantitative information for validation of unsteady flow codes at transitional Reynolds numbers. The maximum velocity seen in the flow is about 1.6 times the free stream value and it occurs slightly downstream of the suction peak location. Some of the measurement difficulties are also discussed.

Chandrasekhara, M. S.↗