Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHARTS - INTERCOOLERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Data for NASA's AVSSE 2 experiment: 25 mb sounding data and synoptic charts

The AVSSE II experiment is described and tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb for the 23 stations participating in the experiment are presented. Soundings were taken between 1,200 GMT, May 6, and 1,200 GMT, May 7, 1975. The methods of data processing and accuracy are briefly discussed. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗

Data for NASA's AVSSE 1 Experiment: 25 Mb Sounding Data and Synoptic Charts

The AVSSE 1 Experiment is described and tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb are presented for the 24 stations participating in the experiment. Soundings were taken between 1,200 GMT, April 27, and 1,200 GMT, April 28, 1975. The methods of data processing and accuracy are briefly discussed. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗

Hydrographic charting from LANDSAT Satellite: A comparison with aircraft imagery

The relative capabilities of two remote-sensing systems in measuring depth and, consequently, bottom contours in sandy-bottomed and sediment-laden coastal waters were determined quantitatively. The multispectral scanner (MSS), orbited on the LANDSAT-2 Satellite, and the ocean color scanner (OCS), flown on U-2 aircraft, were used. Analysis of imagery taken simultaneously indicates a potential for hydrographic charting of marine coastal and shallow shelf areas, even when water turbidity is a factor. Several of the eight optical channels examined on the OCS were found to be sensitive to depth or depth-related information. The greatest sensitivity was in OCS-4(0.544 + or - 0.012 microns) from which contours corresponding to depths up to 12m were determined. The sharpness of these contours and their spatial stability through time suggests that upwelling radiance is a measure of bottom reflectance and not of water turbidity. The two visible channels on LANDSAT's MSS were less sensitive in the discrimination of contours, with depths up to 8m in the high-gain mode (3x) determined in MSS-4(0.5 to 0.6 microns).

Middleton, E. M.↗

Table and charts of equilibrium normal shock and shock tube properties for pure argon with velocities to 18 km/sec

Equilibrium thermodynamic and flow properties are presented in tabulated and graphical form for moving, standing, and reflected normal shock waves in pure argon. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular-weight ratio, isentropic exponent, velocity, and species mole fractions. Incident (moving) shock velocities are varied from 2 to 18 km/sec for a range of initial pressure of 5 N/sq m to 500 kN/sq m. Working charts illustrating shock tube performance with argon test gas and heated helium and hydrogen driver gases are also presented.

Miller, C. G., III↗

Table and charts of equilibrium normal-shock and shock-tube properties for pure carbon dioxide with velocities from 1 to 16 km/sec

Equilibrium thermodynamic and flow properties are presented in tabulated and graphical form for moving, standing, and reflected normal shock waves in pure CO2. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular weight ratio, isentropic exponent, velocity, and species mole fractions. Incident (moving) shock velocities are varied from 1 to 16 km/sec for a range of initial pressure of 5 N/sq m to 500 kN/sq m. The present results are applicable to shock tube flows and to freeflight conditions for a blunt body at high velocities. Working charts illustrating idealized shock tube performance with CO2 test gas and heated helium and hydrogen driver gases are also presented.

Miller, C. G., III↗

Design charts for arbitrarily pivoted, liquid-lubricated flat-sector-pad thrust bearing

A flat, sector-shaped geometry for a liquid-lubricated thrust bearing is analyzed considering both the pitch and roll of the pad. Results are presented in design charts that enable a direct approach to the design of point- and line-pivoted, tilting pad bearings. A comparison is made with the Mitchell bearing approximation and it is found that this approximation always overestimates load capacity.

Etsion, I.↗

GASPLOT - A computer graphics program that draws a variety of thermophysical property charts

A FORTRAN V computer program, written for the UNIVAC 1100 series, is used to draw a variety of precision thermophysical property charts on the Calcomp plotter. In addition to the program (GASPLOT), which requires (15 160) sub 10 storages, a thermophysical properties routine needed to produce plots. The program is designed so that any two of the state variables, the derived variables, or the transport variables may be plotted as the ordinate - abscissa pair with as many as five parametric variables. The parameters may be temperature, pressure, density, enthalpy, and entropy. Each parameter may have as many a 49 values, and the range of the variables is limited only by the thermophysical properties routine.

Trivisonno, R. J.↗

Graphics program for charts

GASPLOT program is reliable, economical, and easy-to-use method of producing variety of thermophysical-property charts.

Hendricks, R. C.↗

Data for NASA's AVE 6 experiment: 25-mb sounding data and synoptic charts

The Atmospheric Variability Experiments 6 experiment is described, and tabulated rawinsonde data at 25-mb intervals from the surface to 25 mb for the 22 stations participating in the experiment is presented. Soundings were taken between 0000 GMT 27 May and 1200 GMT 28 May 1977. The methods of data processing and their accuracy are briefly discussed. Synoptic charts prepared from the data are presented together with an example of contact data.

Dupuis, L. R.↗

Hydrographic charting from Landsat satellite - A comparison with aircraft imagery

The relative capabilities of two remote-sensing systems in measuring depth and, consequently, bottom contours in sandy-bottomed and sediment-laden coastal waters were determined quantitatively. The Multispectral Scanner (MSS), orbited on the Landsat-2 satellite, and the Ocean Color Scanner (OCS), flown on U-2 aircraft, were used for this evaluation. Analysis of imagery taken simultaneously indicates a potential for hydrographic charting of marine coastal and shallow shelf areas, even when water turbidity is a factor. Several of the eight optical channels examined on the OCS were found to be sensitive to depth or depth-related information. The greatest sensitivity was in OCS-4 (0.544 plus or minus 0.012 micron) from which contours corresponding to depths up to 12 m were determined. The sharpness of these contours and their spatial stability through time suggests that upwelling radiance is a measure of bottom reflectance and not of water turbidity. The two visible channels on Landsat's MSS were less sensitive in the discrimination of contours, with depths up to 8 m in the high-gain mode (3 X) determined in MSS-4 (0.5 to 0.6 micron).

Middleton, E. M.↗

A computer program for the generation of logic networks from task chart data

The Network Generation Program (NETGEN), which creates logic networks from task chart data is presented. NETGEN is written in CDC FORTRAN IV (Extended) and runs in a batch mode on the CDC 6000 and CYBER 170 series computers. Data is input via a two-card format and contains information regarding the specific tasks in a project. From this data, NETGEN constructs a logic network of related activities with each activity having unique predecessor and successor nodes, activity duration, descriptions, etc. NETGEN then prepares this data on two files that can be used in the Project Planning Analysis and Reporting System Batch Network Scheduling program and the EZPERT graphics program.

Herbert, H. E.↗

Loran-C plotting program for plotting lines of position on standard charts

A set of programs used to plot Loran C lines of position on any common map or standard aviation sectional chart are given. The Loran C plotting program JRPLOT FORTRAN uses a standard Calcomp compatible plotting subroutine package for the Hewlett-Packard 7203A graphic plotter. The programs are designed to be run on an IBM System 370 computer. A simple add subtract method is used to calculate the lines of position. A description of how to use the program and some methods of operation are given.

Roman, J. P.↗

Charts for determining potential minimum sonic-boom overpressures for supersonic cruise aircraft

Charts which give an estimation of minimum achievable sonic-boom levels for supersonic cruise aircraft are presented. A minimization method based on modified linear theory was analyzed. Results show several combinations of Mach number, altitude, and aircraft length and weight. Overpressure and impulse values are given for two types of sonic boom signatures for each of these conditions: (1) a flat top or minimum overpressure signature which has a pressure plateau behind the initial shock, and (2) a minimum shock signature which allows a pressure rise after the initial shock. Results are given for the effects of nose shape.

Darden, C. M.↗

Spherical harmonic representation of the main geomagnetic field for world charting and investigations of some fundamental problems of physics and geophysics

The data processing of MAGSAT investigator B test tapes and data tapes, and tapes of selected data on 15 magnetically quiet days is reported. The 1980 World Chart spherical model was compared with the MAGSAT (3/80) and MAGSAT vector data were used in the models. An article on modelling the geomagnetic field using satellite data is included.

Barraclough, D. R.↗

Loran-C plotting program for plotting lines of position on standard charts

A set of programs designed to be run on the IBM System/370 computer is described. These programs are used to plot Loran-C lines of position (LOP) on any common map or standard aviation sectional chart. The Loran-C plotting program JRPLOT FORTRAN uses a standard Calcomp-compatible plotting subroutine package for the Hewlett-Packard 7203A graphic plotter. A general description of the features of the Loran-C plotting program. This program involves a simple add/substrate method to calculate the LOP. A description on how to use the program and some methods of operation are included.

Roman, J. P.↗