Search NASA⌕ Search

SEARCH · Search NASA

Results for “CITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Sonochemical reduction of Cr(VI) in air in the presence of organic additives: What are the involved mechanistic pathways?

In this research, the sonochemical (850 kHz) reduction of Cr(VI) (0.3 mM, pH 2, reactor open to air) was analyzed in the presence of different additives. The effects on Cr(VI) reduction efficiency of added formic acid (FA, 10 mM), citric acid (Cit, 2 mM), ethylenediaminetetraacetic acid (EDTA, 1 mM), methanol (MeOH, 0.1 M), ethanol (EtOH, 0.1 M), 2-propanol (2-PrOH, 0.1 M), tert -butanol ( t -BuOH, 0.1 M), phenol (PhOH, 2 mM) and sodium lauryl sulfate (SLS, 1 mM) have been evaluated in comparison with the system in the absence of additives. Complete Cr(VI) reduction was obtained only when using EDTA (at 120 min) and Cit (at 180 min). Cr(III) complexes with these compounds or with their degradation products were detected as final products. For EDTA, Cit, t -BuOH, FA and SLS, the Cr(VI) decay could be adjusted to a zero-order kinetics; in the cases of MeOH, EtOH and 2-PrOH, there was a deviation from the zero-order kinetics. The Cr(VI) conversion increased in the order SLS (very low) < no additive ≅ MeOH ≅ EtOH ≅ 2-PrOH < FA < t -BuOH < PhOH < Cit < EDTA. The role of EDTA and Cit in stabilizing intermediate Cr(V) peroxo compounds and enhancing their direct transformation into different Cr(III) species is considered a major factor in the acceleration of Cr(VI) reduction processes. Mechanistic pathways are proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the impacts of gamma radiolysis on an advanced TALSPEAK separation

Here, the advanced TALSPEAK process is a selective solvent extraction that utilizes 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) to separate lanthanide elements from trivalent actinides, which are held back in the aqueous phase by N-hydroxylethyl-N,N’,N’-ethylenediamine triacetic acid (HEDTA) buffered by citric acid. Gamma irradiation of an experiment containing Eu(III) and Am(III) as representative lanthanide and actinide elements resulted in higher distribution ratios of both and separation factors which decreased in an exponential fashion with increasing dose. Analysis of the reagents showed that the HEDTA concentration also decreased in an exponential fashion, strongly suggesting that degradation was correlated with loss of separation selectivity. In contrast, the concentration of citrate was unaffected, and while the concentration of HEH[EHP] did decrease, its dose-dependent kinetic profile indicated that it was not limiting partitioning. A second set of experiments were conducted using a citrate concentration that was 7.5 X higher, with the expectation that citrate would protect the HEDTA by scavenging radiolytically formed OH radicals. HEDTA degradation was significantly mitigated at higher gamma doses, but the Eu-Am separation was worse than in the low citrate experiments, presumably because at the high citrate concentrations, the Eu-citrate complexes formed in abundances competitive with the Am complexes, and are more effectively held back in the aqueous phase.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Controlled in-situ dissolution of an alkali metal

A method for the controllable dissolution of one or more alkali metals from a vessel containing a one or more alkali metals and/or one or more partially passivated alkali metals. The vessel preferably comprising a sodium, NaK or other alkali metal-cooled nuclear reactor that has been used. The alkali metal, preferably sodium, potassium or a combination thereof, in the vessel is exposed to a treatment liquid, preferably an acidic liquid, more preferably citric acid. Preferably, the treatment liquid is maintained in continuous motion relative to any surface of unreacted alkali metal with which the treatment liquid is in contact. The treatment liquid is preferably pumped into the vessel containing the one or more alkali metals and the resulting fluid is extracted and optionally further processed. Preferably, the resulting off-gases are processed by an off-gas treatment system and the resulting liquids are processed by a liquid disposal system. In one preferred embodiment, an inert gas is pumped into the vessel along with the treatment liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion synthesis of LaFeO{sub 3} sensing nanomaterial

Since industrial revolution, human activities drive towards unsustainable global economy due to the overexploitation of natural resources and the unacceptable emissions of pollution and greenhouse gases. In order to address that issue, engineering research has been focusing on gas sensors development for monitoring gas emissions and controlling the combustion process sustainability. Semiconductors metal oxides sensors are attractive technology because they require simple design and fabrication, involving high accessibility, small size and low cost. Perovskite oxides are the most promising sensing materials because sensitivity, selectivity, stability and speed-response can be modulated and optimized by changing the chemical composition. One of the most convenient synthesis process of perovskite is the citrate-nitrate auto-combustion method, in which nitrate is the oxidizing agent and citrate is the fuel and the chelating argent in the same time. Since the sensibility of perovskite oxides depends on the defective crystallographic structure and the nanomorphology, the experimental was designed in order to study the dependence of powder properties on the synthesis conditions, such as the solution acidity and the relative amount of metals, nitrates and citric acid. Crystalline structure was studied in depth for defining the effects of synthesis conditions on size, morphology and crystallographic structure of nanopowders of LaFeO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxygen nonstoichiometry and chemical stability of Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}}

Nonstoichiometric variation of oxygen content in Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} (x=0, 0.2, 0.4) and decomposition P(O{sub 2}) were determined by means of high temperature gravimetry and coulometric titration. The measurements were carried out in the temperature range from 873 to 1173 K and the P(O{sub 2}) range from 10{sup -20} to 1 bar. Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} shows the oxygen excess and the oxygen deficient composition depending on P(O{sub 2}), temperature, and the Sr content. To evaluate the characteristics of oxygen nonstoichiometric behavior, partial molar enthalpy of oxygen was calculated. The value of partial molar enthalpy of oxygen slightly approaches zero as delta increases in the oxygen excess region while that is independent of delta in the oxygen deficient region. Discussion was made by comparing data of this study with nonstoichiometric and thermodynamic data of La{sub 2-x}Sr{sub x}NiO{sub 4+{delta}}: Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} show more oxygen excess than La{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} in the higher P(O{sub 2}) region, while the nonstoichiometric behavior in the oxygen deficient composition is almost the same. The variation of partial molar enthalpy of oxygen with delta for Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} in the oxygen excess region is much smaller than that of La{sub 2-x}Sr{sub x}NiO{sub 4+{delta}}. The oxygen nonstoichiometric behavior of Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} is more ideal-solution-like than that of La{sub 2-x}Sr{sub x}NiO{sub 4+{delta}}. - Graphical abstract: We synthesized Nd{sub 2-x}Sr{sub x}NiO{sub 4+{delta}} by citric acid method and measured oxygen nonstoichiometry in the temperature range between 873 and 1173 K. They showed both oxygen excess and oxygen deficient composition depending on P(O{sub 2}), temperature, and. the Sr content. The results are compared with the oxygen nonstoichiometry of La{sub 2-x}Sr{sub x}NiO{sub 4+{delta}}.

36 MATERIALS SCIENCE↗

Electrospun PVA Fibers for Drug Delivery: A Review

Innovation in biomedical science is always a field of interest for researchers. Drug delivery, being one of the key areas of biomedical science, has gained considerable significance. The utilization of simple yet effective techniques such as electrospinning has undergone significant development in the field of drug delivery. Various polymers such as PEG (polyethylene glycol), PLGA (Poly(lactic-co-glycolic acid)), PLA(Polylactic acid), and PCA (poly(methacrylate citric acid)) have been utilized to prepare electrospinning-based drug delivery systems (DDSs). Polyvinyl alcohol (PVA) has recently gained attention because of its biocompatibility, biodegradability, non-toxicity, and ideal mechanical properties as these are the key factors in developing DDSs. Moreover, it has shown promising results in developing DDSs individually and when combined with natural and synthetic polymers such as chitosan and polycaprolactone (PCL). Considering the outstanding properties of PVA, the aim of this review paper was therefore to summarize these recent advances by highlighting the potential of electrospun PVA for drug delivery systems.

59 BASIC BIOLOGICAL SCIENCES↗

Assessing the Extractability of Rare Earth Elements from Coal Preparation Fines Refuse Using an Organic Acid Lixiviant

We report that this work is a first-order study to assess the suitability of an organic acid lixiviant to extract rare earth elements (REE) from coal preparation fines refuse sourced from a Pennsylvania mine with a total REE of ~ 300 ppm. The extraction of REE using an organic acid, in this case 0.1 M citric acid and 0.5 M trisodium citrate solution, is compared against 0.5 M (NH 4 ) 2 SO 4 , 1 M HCl, 1.2 M H 2 SO 4 , and 0.5 M ethylenediaminetetraacetic acid (EDTA). Ashing the coal waste material prior to leaching tests with the citrate solution nominally improved REE extraction. Buffered citrate solution recovered 7% of the total REE in the as-received Isabella Fines as compared to 11% in ashed samples, whereas (NH 4 ) 2 SO 4 extracted 5–6%, respectively. EDTA recovered up to 33% of the total REE, most likely due to the higher coordination chelate bond. Mineral acids, however, outperformed the organic acids on ashed material (16–52% REE recovery), suggesting that organic acids may not be a suitable competitive option for REE extraction from these types of feedstocks.

01 COAL, LIGNITE, AND PEAT↗

Influence of vitamin B auxotrophy on nitrogen metabolism in eukaryotic phytoplankton

While nitrogen availability is known to limit primary production in large parts of the ocean, vitamin starvation amongst eukaryotic phytoplankton is becoming increasingly recognized as an oceanographically relevant phenomenon. Cobalamin (B12) and thiamine (B1) auxotrophy are widespread throughout eukaryotic phytoplankton, with over 50% of cultured isolates requiring B12 and 20% requiring B1. The frequency of vitamin auxotrophy in harmful algal bloom species is even higher. Instances of colimitation between nitrogen and B vitamins have been observed in marine environments, and interactions between these nutrients have been shown to impact phytoplankton species composition. This review surveys available data, including relevant gene expression patterns, to evaluate the potential for interactive effects of nitrogen and vitamin B12 and B1 starvation in eukaryotic phytoplankton. B12 plays essential roles in amino acid and one-carbon metabolism, while B1 is important for primary carbohydrate and amino acid metabolism and likely useful as an anti-oxidant. Here we will focus on three potential metabolic interconnections between vitamin, nitrogen, and sulfur metabolism that may have ramifications for the role of vitamin and nitrogen scarcities in driving ocean productivity and species composition. These include: (1) B12, B1, and N starvation impacts on osmolyte and antioxidant production, (2) B12 and B1 starvation impacts on polyamine biosynthesis, and (3) influence of B12 and B1 starvation on the diatom urea cycle and amino acid recycling through impacts on the citric acid cycle. We evaluate evidence for these interconnections and identify oceanographic contexts in which each may impact rates of primary production and phytoplankton community composition. Major implications include that B12 and B1 deprivation may impair the ability of phytoplankton to recover from nitrogen starvation and that changes in vitamin and nitrogen availability may synergistically impact harmful algal bloom formation.

54 ENVIRONMENTAL SCIENCES↗

Nanostructured aluminium titanate (Al{sub 2}TiO{sub 5}) particles and nanofibers: Synthesis and mechanism of microstructural evolution

In this study, aluminium titanate (AT) particles and nanofibers were synthesized through citrate sol gel and sol gel-assisted electrospinning methods in both nanostructured powder and nanofiber forms. The results of X-ray diffraction analysis, field-emission scanning electron microscopy and differential thermal analysis showed that the synthetic products benefit a nanostructured nature with a grain size less than 70 nm. The optimal values for time and temperature at which a roughly pure AT is attained were determined as 2 h and 900 °C, respectively. It was found that the sol gel precursor bears an amorphous structure till 700 °C and begins to be crystallized to alumina, anatase and AT at higher temperatures. Moreover, AT tends to decompose into rutile and alumina at temperatures higher than 900 °C and its degradation rate reaches a maximum at temperatures near to 1100 °C. In this synthesis, citric acid was used as a chelating agent for Al{sup 3} {sup +} and Ti{sup 4} {sup +} ions and it was shown that a low citric acid-to-metal cation ratio leads to larger numbers of nuclei during crystallization and smaller grain size. Finally, a model was suggested to describe the microstructural evolution of AT compound based on a nucleation and growth regime. - Graphical abstract: Display Omitted - Highlights: • We synthesized aluminium titanate ceramic in both powder and nanofiber forms. • The methods in use were citrate sol gel and sol gel-assisted electrospinning. • Powders and nanofibers bear a nanostructured nature with a grain size less than 70 nm. • A model is suggested to describe microstructural evolution of synthetic products.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

COMBINING NEUTRAL AND ACIDIC EXTRACTANTS FOR RECOVERING TRANSURANIC ELEMENTS FROM NUCLEAR FUEL

We have been investigating a solvent extraction system that combines a neutral extractant--octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO)--with an acidic extractant--bis(2-ethylhexyl)phosphoric acid (HDEHP)--to form a single process solvent for separating Am and Cm from the other components of irradiated nuclear fuel. It was originally hypothesized that the extraction chemistry of CMPO would dominate under conditions of high acidity (> 1 M HNO3), resulting in co-extraction of the transuranic and lanthanide elements into the organic phase. Contacting the loaded solvent with a solution of diethylenetriaminepentaacetate (DTPA) buffered with lactic or citric acid at pH {approx}3 to 4 would result in a condition in which the HDEHP chemistry dominates. Although the data somewhat support this hypothesis, it is clear that there are interactions between the two extractants such that they do not act independently in the extraction and stripping regimes. We report here studies directed at determining the nature and extent of interaction between CMPO and HDEHP, the synergistic behavior of CMPO and HDEHP in the extraction of americium and neodymium, and progress towards determining the thermodynamics of this extraction system. Neodymium and americium behave similarly in the combined solvent system, with a significant synergy between CMPO and HDEHP in the extraction of both of these trivalent elements from lactate-buffered DTPA solutions. In contrast, a much weaker synergistic behaviour is observed for europium. Thus, investigations into the fundamental chemistry involved in this system have focused on the neodymium extraction. The extraction of neodymium has been systematically investigated, individually varying the HDEHP concentration, the CMPO concentration, or the aqueous phase composition. Thermodynamic modeling of the neodymium extraction system has been initiated. Interactions between CMPO and HDEHP in the organic phase must be taken into account in the thermodynamic modeling; such interactions have been quantified by nuclear magnetic resonance measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of Rheological Modifiers on Various Slurries Supporting DOE Waste Processing

Controlling the stability and subsequent rheological properties of slurries has been an important but challenging issue in nuclear waste treatment, one that previous research has yet to sufficiently address. At the Hanford and Savannah River sites, operation of the waste treatment facilities at increased solids loading reduces the evaporative load on the melter systems and thereby increases waste processing rates. However, at these higher solids loadings, increased slurry rheology becomes a significant processing issue. The current study evaluates the use of several rheological modifiers to alleviate increased slurry rheology at high waste solids concentrations. Rheological modifiers change particle interactions in slurry. For colloidal slurries, modifiers mainly alter the electrostatic and steric interactions between particles, leading to a change in slurry rheology. Weak organic acid type rheological modifiers strengthen electrostatic repulsion whereas nonionic/polymer surfactant type rheological modifiers introduce a steric repulsion. We investigated various rheological modifiers using high level waste (HLW) nuclear waste simulants characterized typically by high ionic strength and a wide range of pH from 4 to 13. Using rheological analysis, it was found that citric acid and polyacrylic acid would be good rheological modifiers for the HLW simulants tested, effectively reducing slurry rheology by 40% or more. Physical insights into the mechanisms driving stabilization by these rheological modifiers will be discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Novel combustion method to prepare octahedral NiO nanoparticles and its photocatalytic activity

Graphical abstract: - Highlights: • NiO nanoparticles were synthesized by solution combustion method. • Prepared NiO nanoparticles are fcc structure. • Synthesized NiO nanoparticles are octahedral shape. • Shows good photocatalytic activity. - Abstract: Nickel oxide nanoparticles (NiO NPs) were synthesized by solution combustion method using glycine and citric acid as fuels. The X-ray diffraction (XRD) result confirms the face centered cubic (fcc) structure of NiO. The octahedral shape of NiO NPs was confirmed by field emission scanning electron microscope (FESEM) and high resolution transmission electron microscopy (HRTEM). It is possible to suggest that the organic fuel (citric acid/glycine) is responsible for the formation of the octahedral shape due to the easier complex formation. Photocatalytic activity of NiO NPs also evaluated and found that the prepared NiO NPs have high photocatalytic degradation. In the present study, the crystalline nature and shape of the NiO nanoparticles plays a vital role in determining the photocatalytic activity.

36 MATERIALS SCIENCE↗

Possibilities of surface-sensitive X-ray methods for studying the molecular mechanisms of interaction of nanoparticles with model membranes

The processes of structural rearrangement in a model membrane, i.e., an arachic acid monolayer formed on a colloidal solution of cerium dioxide or magnetite, are studied in situ in real time by the methods of X-ray standing waves and 2D diffraction. It is shown that the character of the interaction of nanoparticles with the monolayer is determined by their nature and sizes and depends on the conditions of nanoparticle synthesis. In particular, the structure formation in the monolayer–particle system is greatly affected by the stabilizer (citric acid), which is introduced into the colloidal solution during synthesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Efficient, Optimized Synthesis of Fentanyl and Related Analogs

The alternate and optimized syntheses of the parent opioid fentanyl and its analogs are described. The routes presented exhibit high-yielding transformations leading to these powerful analgesics after optimization studies were carried out for each synthetic step. The general three-step strategy produced a panel of four fentanyls in excellent yields (73–78%) along with their more commonly encountered hydrochloride and citric acid salts. In conclusion, the following strategy offers the opportunity for the gram-scale, efficient production of this interesting class of opioid alkaloids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-Assisted Combustion Synthesis of ZnO:Eu Nanoparticles: Effect of Fuel Types

Nanoparticles of Europium oxide doped with Zinc oxide were synthesized via microwave-assisted combustion method. Citric acid as a simultaneous fuel and chelating agent and glycine as a fuel and mixture of these fuels were sleeted. X-Ray diffraction patterns (XRD) indicated the formation of ZnO structure with a few amount of Eu{sub 2}O{sub 3} phase. Fourier transformation infra red (FTIR) spectra reveal the increase of ZnO{sub 4} bonds with glycine content of fuels mixture. Scanning electron microscope (SEM) images showed the conversion of nanosphere to spongy-like structure with respect to change of fuel mixtures from citric to glycine. From transmission electron microscopy (TEM) nanoparticles of a mean size 30 nm are observed Green fluorescence emission of different samples was due to activation of self activated center of ZnO structure through transition of electron from Eu{sup 3+} to V{sub zn} sites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Template confined synthesis of amorphous carbon nanotubes and its confocal Raman microscopy

Amorphous carbon nanotubes (aCNTs) were synthesized by AAO (anodic aluminum oxide) template at a temperature 500 °C in nitrogen atmosphere using the citric acid as a carbon source without the help of any catalyst particles. Morphological analysis of the as prepared samples was carried out by field emission scanning electron microscopy (FESEM). Confocal Raman imaging has been studied and an attempt has been made to find out the graphitic (sp{sup 2}) and disordered phase of the CNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of nanocrystalline yttrium iron garnet by low temperature solid state reaction

In this work, nanocrystalline yttrium iron garnet powders were produced by low temperature solid state reaction. The phase evolution during the procedure was determined from the thermogravimetric and differential thermal analysis, and the x-ray diffraction patterns. The results of transmission electron microscopy indicated that the prepared powders exhibited grain size at the nano-level of 20 {approx} 40 nm. Dense ceramics with a theoretical density of around 98% were obtained from the prepared powders after sintering at 1280 deg. C, a relative low sintering temperature compared with conventional ceramic processes, and the saturation magnetizations of sintered samples were also determined. - Research Highlights: {yields}No sol or gel form during the synthesis processing using nitrates and citric acid as raw materials. {yields}The synthesis method needs a low heating temperature (700 deg. C) compared with conventional solid state reaction. {yields}The product is a single phase with homogeneous size distribution and nano grains (20 {approx} 40 nm) confirmed by TEM. {yields}Dense YIG ceramic can be sintered at a low temperature (1280 deg. C) compared with that in conventional processing.

36 MATERIALS SCIENCE↗

Mercury reduction studies to facilitate the thermal decontamination of phosphor powder residues from spent fluorescent lamps

This work investigates the thermal release of mercury from phosphor powder of spent fluorescent lamps. The treatment conditions and the ability of various reducing agents (primarily sodium borohydride) to lower the overall heating temperature required to improve the release of Hg have been evaluated. Hg species in samples were monitored in a thermal desorption atomic absorption spectrometer system, and total mercury was analyzed in a cold vapor atomic absorption spectrometer. Sodium borohydride was the best reducing agent among the ones studied. However, citric acid presented a high capacity to weaken mercury bonds with the matrix. When the sample was crushed with sodium borohydride for 40 min in a mass ratio of 10:1 (sample:reducing agent) and submitted to thermal treatment at 300 deg. C for 2 h, the concentration of mercury in a phosphor powder sample with 103 mg kg{sup -1} of mercury reached 6.6 mg kg{sup -1}.

54 ENVIRONMENTAL SCIENCES↗