Search NASA⌕ Search

SEARCH · Search NASA

Results for “CLOUDS. RADIATION. MODELING.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

High Vertically Resolved Atmospheric State Revealed with IASI Single FOV Retrievals under All-weather Conditions

The Infrared Atmospheric Sounding Interferometer (IASI) on the MetOp satellite was launched on October 19, 2006. The Joint Airborne IASI Validation Experiment (JAIVEx) was conducted during April 2007 mainly for validation of the IASI on the MetOp satellite. IASI possesses an ultra-spectral resolution of 0.25 cm(exp -1) and a spectral coverage from 645 to 2760 cm(exp -1). Ultra-spectral resolution infrared spectral radiance obtained from near nadir observations provide atmospheric, surface, and cloud property information. An advanced retrieval algorithm with a fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. Preliminary retrievals of atmospheric soundings, surface properties, and cloud optical/microphysical properties with the IASI observations are obtained and presented. These retrievals are further inter-compared with those obtained from airborne FTS system, such as the NPOESS Airborne Sounder Testbed - Interferometer (NAST-I), dedicated dropsondes, radiosondes, and ground based Raman Lidar. The capabilities of satellite ultra-spectral sounder such as the IASI are investigated to benefit future NPOESS operation.

Zhou, Daniel K.↗
NASA NTRS1990

The effect of convective life cycle stage on microwave brightness temperature/rainrate relations as determined from 3-D cloud model results

The relationship between the rain rate and the brightness temperature (Tb) was investigated using a cloud model/microwave radiative transfer model combination to obtain the rain-rate/Tb relations for four different frequencies: 10, 19, 37, and 86 GHz. The results at 19, 37, and 86 GHz were found to be significantly affected by ice in the modeled convective system, while the results at 10 GHz showed very little effect. Nonprecipitating cloud water was found to affect Tb in two ways. First, at low rain rates, the presence of significant cloud water produced higher Tb values than in cases with little cloud water. The second effects occurs at 19, 37, and 86 GHz at higher rainrates associated with significant ice formation; the scattering by ice lowered the Tb.

Adler, Robert F.↗
DOE OSTI2021

Investigating the impact of cloud-radiative feedbacks on tropical precipitation extremes

Abstract Although societally important, extreme precipitation is difficult to represent in climate models. This study shows one robust aspect of extreme precipitation across models: extreme precipitation over tropical oceans is strengthened through a positive feedback with cloud-radiative effects. This connection is shown for a multi-model ensemble with experiments that make clouds transparent to longwave radiation. In all cases, tropical extreme precipitation reduces without cloud-radiative effects. Qualitatively similar results are presented for one model using the cloud-locking method to remove cloud feedbacks. The reduced extreme precipitation without cloud-radiative feedbacks does not arise from changes in the mean climate. Rather, evidence is presented that cloud-radiative feedbacks enhance organization of convection and most extreme precipitation over tropical oceans occurs within organized systems. This result suggests that climate models must correctly predict cloud structure and properties, as well as capture the essence of organized convection in order to accurately represent extreme rainfall.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Characterization of 3D Cirrus Cloud and Radiation Fields Using ARS/AIRS/MODIS data and its Application to Climate Model

During the report period, we have made the following research accomplishments. First, we performed analysis for a number of MODIS scenes comprising of heavy dust events and ice clouds, covering regions of frequent dust outbreaks in East Asia, Middle East, and West Africa, as well as areas associated with long-range dust transports over the Equatorial Tropical Atlantic Ocean. These scenes contain both dust/aerosols and clouds. We collected suitable aerosol/ice-cloud data, correlated ice cloud and aerosol parameters by means of statistical analysis, and interpreted resulting correlation trends based on the physical principles governing cloud microphysics. Aerosol and cloud optical depths and cloud effective particle size inferred from MODIS for selected domains were analyzed from which the parameters including dust aerosol number concentration, ice cloud water path, and ice particle number concentration were subsequently derived. We illustrated that the Twomey (solar albedo) effect can be statistically quantified based on the slope of best-fit straight lines in the correlation study. Analysis of aerosol and cloud retrieval products revealed that for all cases, the region with a larger dust aerosol optical depth is always characterized by a smaller cloud particle size, consistent with the Twomey hypothesis for aerosol-cloud interactions. Second, we developed mean correlation curves with uncertainties associated with small ice-crystal concentration observations for the mean effective ice crystal size (De) and ice water content (IWC) by dividing the atmosphere into three characteristic regions: Tropics cirrus, Midlatitude cirrus, including a temperature classification to improve correlation, and Arctic ice clouds. We illustrated that De has a high correlation with IWC based on theoretical consideration and analysis of thousands of observed ice crystal data obtained from a number of ARM-DOE field campaigns and other experiments. The correlation has the form: ln(De) = a + b ln(IWC) + c ((ln(IWC))2, where a, b, and c are fitting coefficients and are functions of three regions. We demonstrated that this correlation can be effectively incorporated in GCMs and climate models that predict IWC - a significant advance in ice microphysics parameterization for interactive cloud-radiation analysis and feedback. Substantial July mean differences are shown in the OLR (W/m2) and precipitation (mm/day) patterns between UCLA GCM simulations based on Des determined from the De-IWC correlations and the control run using a fixed ice crystal size. Third, in order to improve the computation of spectral radiative transfer processes in the WRF model, we developed a consistent and efficient radiation scheme that can better resolve the spectral bands, determine the cloud optical properties, and provide more reliable and accurate radiative heating fields. In the newly developed radiation module, we have implemented in WRF a modified and improved version referred to as the Fu-Liou-Gu scheme, which includes a combination of delta-four-stream and delta-two-stream approximations for solar and IR flux calculations, respectively. This combination has been proven to be computationally efficient and at the same time to produce a high degree of accuracy. The incorporation of nongray gaseous absorption in multiple scattering atmospheres was based on the correlated k-distribution method. The solar and IR spectra are divided into 6 and 12 bands, respectively, according to the location of absorption bands of H2O, CO2, O3, CH4, N2O, and CFCs. We further included absorption by the water vapor continuum and a number of minor absorbers in the solar spectrum leading to an additional absorption of solar flux in a clear atmosphere on the order of 1-3 W/m2. Additionally, we incorporated the ice microphysics parameterization that includes an interactive mean effective ice crystal size in association with radiation parameterizations. The Fu-Liou-Gu scheme is an ideal tool for the simulation of radiative transfer and ice microphysics within the domain of WRF. It is particularly useful for studying direct and indirect aerosol radiative effects associated with ice cloud formation. The newly implemented radiation module has been demonstrated to work well in WRF and can be effectively used for studies related to cirrus cloud formation and evolution as well as aerosol-cloud-radiation interactions. With the newly implemented radiation scheme, the simulations of cloud cover and ice water path have been improved for cirrus clouds, with a more consistent comparison with the corresponding MODIS observations, especially for optically thin cirrus with an improvement of about 20% in the simulated mean ice water path.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

A Physics-based Smart Persistence model for Intra-hour forecasting of solar radiation (PSPI) using GHI measurements and a cloud retrieval technique

Short-term solar forecasting models based solely on global horizontal irradiance (GHI) measurements are often unable to discriminate the forecasting of the factors affecting GHI from those that can be precisely computed by atmospheric models. Here, we introduce a Physics-based Smart Persistence model for Intra-hour forecasting of solar radiation (PSPI) that decomposes the forecasting of GHI into the computation of extraterrestrial solar radiation and solar zenith angle and the forecasting of cloud albedo and cloud fraction. The extraterrestrial solar radiation and solar zenith angle are accurately computed by the Solar Position Algorithm (SPA) developed at the National Renewable Energy Laboratory (NREL). A cloud retrieval technique is used to estimate cloud albedo and cloud fraction from surface-based observations of GHI. With the assumption of persistent cloud structures, the cloud albedo and cloud fraction are predicted for future time steps using a two-stream approximation and a 5-min exponential weighted moving average, respectively. Our model evaluation using the long-term observations of GHI at NREL's Solar Radiation Research Laboratory (SRRL) shows that the PSPI has a better performance than the persistence and smart persistence models in all forecast time horizons between 5 and 60 min, which is more significant in cloudy-sky conditions. Finally, compared to the persistence and smart persistence models, the PSPI does not require additional observations of various atmospheric parameters but is customizable in that additional observations, if available, can be ingested to further improve the GHI forecast. An advanced technology of cloud forecast is also expected to improve the future performance of the PSPI.

14 SOLAR ENERGY↗
NASA NTRS1994

An inquiry into the cirrus-cloud thermostat effect for tropical sea surface temperature

In this paper, we investigate the relative importance of local vs remote control on cloud radiative forcing using a cumulus ensemble model. It is found that cloud and surface radiation forcings are much more sensitive to the mean vertical motion assoicated with large scale tropical circulation than to the local SST (sea surface temperature). When the local SST is increased with the mean vertical motion held constant, increased surface latent and sensible heat flux associated with enhanced moisture recycling is found to be the primary mechanism for cooling the ocean surface. Large changes in surface shortwave fluxes are related to changes in cloudiness induced by changes in the large scale circulation. These results are consistent with a number of earlier empirical studies, which raised concerns regarding the validity of the cirrus-thermostat hypothesis (Ramanathan and Collins, 1991). It is argued that for a better understanding of cloud feedback, both local and remote controls need to be considered and that a cumulus ensemble model is a powerful tool that should be explored for such purpose.

Lau, K.-M.↗
NASA NTRS1989

Interactions among radiation, convection, and large-scale dynamics in a general circulation model

The effects of radiatively active clouds on the climate simulated by a GCM are studied, focusing on the effects of upper tropospheric stratiform clouds associated with deep cumulus convection and the interactions of these clouds with convection and the large-scale circulation. The isolated effects of atmospheric cloud radiative forcing are analyzed using a model climate of an ocean-covered earth. It is found that the upper tropospheric cloudiness associated with cumulus convection has a powerful influence on both the convection and the large-scale circulation. Consideration is given to the importance of developing a GCM which includes a direct representation of the radiative, thermodynamical, and dynamical couplings between the convection parameterization and the large-scale saturation parameterization.

Randall, David A.↗
NASA NTRS1991

AMPR/SSMI data comparisons

The AMPR (Advanced Microwave Precipitation Radiometer) was flown for the first time with successful data collection over precipitation targets in Florida and off the Oregon coast. The AMPR met its expected performance levels with very low noise and relatively troublefree operation. Numerous rain cloud systems over land and ocean were overflown and the measurements at 10.7, 19.35, 37.1, and 85.5 GHz reveal a wide variety of microphysical conditions which exist within rain cloud systems. Although predicted by radiative transfer model calculations from cloud model simulations, this diversity was not observed before due to the poor spatial resolution of spaceborne microwave radiometers. Saturation of the 19.35 GHz rain emission signal was frequently observed in the oceanic rain systems, supporting the desirability of a 10 GHz channel on the TRMM (Tropical Rain Measuring Mission) microwave radiometer for sensitivity to the higher rain rates.

Spencer, Roy W.↗
NASA NTRS2021

The Top-of-Atmosphere, Surface and Atmospheric Cloud Radiative Kernels Based on ISCCP-H Datasets: Method and Evaluation

This study aims to create observation-based cloud radiative kernel (CRK) datasets and evaluate them by direct comparison of CRK and the CRK-derived cloud feedback datasets. Based on the International Satellite Cloud Climatology Project (ISCCP) H datasets, we calculate CRKs (called ISCCP-FH or FH CRKs) as 2D joint function/histogram of cloud optical depth and cloud top pressure for shortwave (SW), longwave (LW), and their sum, Net, at the top of atmosphere (TOA), as well as, for the first time, at the surface (SFC) and in the atmosphere (ATM). With cloud fraction change (CFC) datasets from doubled-CO2 simulation and short-term observational anomalies, we derive all the TOA, SFC and ATM cloud feedback for SW, LW and Net using our CRKs.The direct comparison with modeled and observed CRKs (or cloud radiative effects), cloud feedback from previous model results and the Clouds and the Earth's Radiant Energy System products show that our CRKs and CRK-derived cloud feedback are reasonably well validated. We estimate the uncertainty for the CRK-derived cloud feedback and show that the CFC-associated uncertainty contributes >98.5% of the total cloud feedback uncertainty while CRK's is very small. Our preliminary evaluation also shows that some near-zero/small cloud feedback in the TOA-alone feedback indeed results from the compensation of sizable cloud feedback of the SFC and ATM feedback and reveals some significant surface and atmospheric cloud feedback whose sum appears insignificant in TOA-alone feedback. In addition, the atmospheric longwave cloud feedback seems to play a role in enhancing meridional atmospheric energy transport.

cloud radiative kernel↗
DOE OSTI2016

Coupling sky images with radiative transfer models: a new method to estimate cloud optical depth

A method for retrieving cloud optical depth ( τ c ) using a UCSD developed ground-based sky imager (USI) is presented. The radiance red–blue ratio (RRBR) method is motivated from the analysis of simulated images of various τ c produced by a radiative transfer model (RTM). From these images the basic parameters affecting the radiance and red–blue ratio (RBR) of a pixel are identified as the solar zenith angle ( θ 0 ), τ c , solar pixel angle/scattering angle ( θ s ), and pixel zenith angle/view angle ( θ z ). The effects of these parameters are described and the functions for radiance, I λ τ c , θ 0 , θ s , θ z , and RBR τ c , θ 0 , θ s , θ z are retrieved from the RTM results. RBR, which is commonly used for cloud detection in sky images, provides non-unique solutions for τ c , where RBR increases with τ c up to about τ c = 1 (depending on other parameters) and then decreases. Therefore, the RRBR algorithm uses the measured I λ meas θ s , θ z , in addition to RBR meas θ s , θ z , to obtain a unique solution for τ c . The RRBR method is applied to images of liquid water clouds taken by a USI at the Oklahoma Atmospheric Radiation Measurement (ARM) program site over the course of 220 days and compared against measurements from a microwave radiometer (MWR) and output from the Min et al. (2003) method for overcast skies. τ c values ranged from 0 to 80 with values over 80, being capped and registered as 80. A τ c RMSE of 2.5 between the Min et al. (2003) method and the USI are observed. The MWR and USI have an RMSE of 2.2, which is well within the uncertainty of the MWR. In conclusion, the procedure developed here provides a foundation to test and develop other cloud detection algorithms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Collaborative Research: Advancing Arctic Climate Projection Capability at Seasonal to Decadal Scales (Final Technical Report)

The Regional Arctic System Model (RASM) at process resolving configurations has been used to (i) advance understanding of physical processes and feedbacks involved in Arctic amplification and (ii) understand and potentially reduce uncertainty in prediction of arctic climate change at seasonal to decadal scales. RASM consists the atmosphere (Weather and Research Forecasting model, WRF), ocean (Parallel Ocean Program, POP), sea ice (CICE), land hydrology (Variable Infiltration Capacity model, VIC), river routing scheme (RVIC), marine biogeochemistry components and the coupling framework (CPL7). Its domain is pan-Arctic, with the atmosphere and land components configured on a 50-km or 25-km grid and four configurations of the ocean and sea ice components: 1/12°(~9.3km) or 1/48°(~2.4km) and 45 or 60 vertical layers. These RASM configurations have been motivated by the emerging exascale capability for high performance computing to improve model fidelity. The dynamical downscaling of reanalysis allows comparison of RASM results with observations in place and time to: (i) advance system level understanding of physical processes and coupling involved in an event, (ii) optimize model parameter space, (iii) diagnose and reduce model biases and (iv) produce realistic and consistent across all the components initial conditions for predictions and predictability studies, which are all unique capabilities not available in global Earth System Models (ESMs). An evaluation of RASM 1.0 (Cassano et al. 2017) revealed that it had a cold bias over the oceans and a warm bias over land areas due largely to cloud and radiation biases in the model, with too little cloud cover simulated over land and too much cloud cover simulated over sub-polar oceans. This study has motivated an upgrade to WRF version 3.7.1 in RASM and allowed for the inclusion of the radiative impact of convective clouds. A variety of atmospheric physics parameterizations were evaluated against observations (e.g. data from the Arctic Clouds in Summer Experiment (ACSE); Sedlar et al. 2020) to identify an optimal suite of WRF physics options in RASM. The RASM with the optimized WRF physics were used to study the impact of strong mesoscale winds over the ocean around the southern tip of Greenland (DuVivier and Cassano 2016) and their impact on oceanic convection (DuVivier et al. 2017a). Data from the PolarWinds field campaign were used to evaluate WRF boundary layer physics and resolution impacts on the simulation of a Greenland barrier wind event (DuVivier et al. 2017b). The RVIC streamflow routing model has been implemented in RASM to realistically represent high-resolution streamflow processes (Hamman et al. 2017) and to couple the land buoyancy fluxes to the ocean. The RASM-RVIC high-resolution data set of all coastal freshwater fluxes for the Arctic drainage basin and surrounding areas for 1979-2014 was published as a separate product (https://doi.org/10.5281/zenodo.293037). The fidelity of atmospheric momentum transfer to and the response of polar marine Ekman layer in RASM and Community Earth System Model (CESM) was investigated by Roberts et al. (2015). The increased frequency of oceanic flux exchange in CESM, following the RASM guidance, caused a considerable increase in the median inertial ice speed across the Southern Ocean and parts of the Arctic. A comprehensive evaluation of the RASM1.0 atmosphere-ocean-sea ice-land interface was completed by Brunke et al. (2018). RASM was also demonstrated for its capability to simulate extreme events in agreement with observations in space and time (Lee et al. submitted). In particular, the development of three open water events, known as polynyas, have been simulated north of Greenland in February of 2011, 2017 and 2018, in agreement with satellite observations for the past four decades. The optimized RASM sea ice results have been favorably evaluated against satellite observations and a subset of eleven CMIP6 models (Watts et al. submitted). In a complementary project, Jin et al. (2018) have shown that RASM with higher-resolution and new sea-ice processes contributed to lower model errors in sea-ice conditions, concentrations of nutrients and ice algae, in comparison to results from the coarse-resolution (1°) CESM. In two other complementary studies, RASM results were used (i) to explain areas of concentrated use by bowhead whales, the seasonal progression in the use, and the physical environment within those areas (Citta et al. 2015) and (ii) for a synthesis of fall bowhead whales distribution and migration in the Bering-Chukchi-Beaufort (BCB) Sea to investigate whale movements and feeding to the local ocean hydrography and currents (Citta et al. 2018). However, the multi-decadal output from the CESM Large Ensemble yielded unrealistic forcing. Instead, the shorter NCEP CFSv2 9-month forecasts were successfully tested and afforded an increased ensemble size (~30) to demonstrate gains of dynamical downscaling at sub-seasonal to intra-annual time scales. The improved model physics and coupling among RASM model components have yielded more realistic representation of the sea ice cover and consistent across all model components initial conditions. Consequently, RASM demonstrates significant gains compared to simulation of sea ice in the NCEP reanalysis. In addition, RASM 6-month ensemble forecasts yield very realistic sea ice distribution, which demonstrates both significant gains of dynamical downscaling and the continued impact of the initial conditions on forecasts out to 6 months (https://nps.edu/web/rasm/predictions). A follow up study using RASM for dynamical downscaling of the more realistic CESM initialized Decadal Prediction Large Ensemble output is currently ongoing as part of the DOE RGMA HiLAT-RASM project.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Development, improvement and application of atmospheric radiative transfer models for prediction of the climatic effects of clouds and aerosols

The demands of accurate predictions of radiative transfer for climate applications are well-documented. While much effort is being devoted to evaluating the accuracy of the GCM radiative transfer schemes, the problem of developing accurate, computationally efficient schemes for climate models still remains. This paper discusses our efforts in developing accurate and fast computational methods for global and regional climate models.

Bergstrom, Robert W.↗
NASA NTRS2005

A Hierarchical Modeling Study of the Interactions Among Turbulence, Cloud Microphysics, and Radiative Transfer in the Evolution of Cirrus Clouds

This project used a hierarchy of cloud resolving models to address the following science issues of relevance to CRYSTAL-FACE: What ice crystal nucleation mechanisms are active in the different types of cirrus clouds in the Florida area and how do these different nucleation processes influence the evolution of the cloud system and the upper tropospheric humidity? How does the feedback between supersaturation and nucleation impact the evolution of the cloud? What is the relative importance of the large-scale vertical motion and the turbulent motions in the evolution of the crystal size spectra? How does the size spectra impact the life-cycle of the cloud, stratospheric dehydration, and cloud radiative forcing? What is the nature of the turbulence and waves in the upper troposphere generated by precipitating deep convective cloud systems? How do cirrus microphysical and optical properties vary with the small-scale dynamics? How do turbulence and waves in the upper troposphere influence the cross-tropopause mixing and stratospheric and upper tropospheric humidity? The models used in this study were: 2-D hydrostatic model with explicit microphysics that can account for 30 size bins for both the droplet and crystal size spectra. Notably, a new ice crystal nucleation scheme has been incorporated into the model. Parcel model with explicit microphysics, for developing and evaluating microphysical parameterizations. Single column model for testing bulk microphysics parameterizations

Curry, Judith↗
DOE OSTI2018

A New Approach for Short-Term Solar Radiation Forecasting Using the Estimation of Cloud Fraction and Cloud Albedo

Solar generation is an increasing part of the energy portfolio in the United States. An accurate forecast of the available solar resource and power is essential to managing the electric grid, market operations, and reducing the cost of solar energy. High-frequency forecasts of solar radiation in intra-hour horizons is important for real-time electric power system energy management, especially at the distribution level. Conventional Numerical Weather Prediction models perform poorly in intra-hour, high-frequency forecasts because of the limits on real-time computing, spatial resolution, and infrequent availability of observations. Although a number of alternative technologies, e.g., time-series analysis and machine learning, have been used to fill this gap, the smart persistence model is among the top-performing models in short-term forecasting and therefore often serves as the baseline to evaluate other forecasting models. Although the smart persistence model often serves as the baseline model in these intra-hour forecasts, obvious uncertainties exist in the current smart persistence model: (1) clear-sky index does not respond to the variation of the solar incident angle when cloud conditions are persistent within the forecast horizon, and (2) cloud coverage is inherently persistent though it is constrained by cloud advection. In this study, we developed a Physics-Based Smart Persistence Model for Intra-Hour Solar Forecasting (PSPI) that integrates cloudy property estimation, a radiative transfer model, and cloud fraction forecasts to improve the performance of the smart persistence model. Compared to the smart persistence model, PSPI does not require additional observations of various atmospheric parameters past global horizontal irradiance, but it is customizable because additional observations, if available, can be ingested to further improve the forecast. Our results show that the PSPI outperforms the persistence and smart persistence model on 5-minute, 15-minute, and 30-minute forecast horizons. The software package of PSPI is flexible to users' needs and provides low computational time to run at site-specific locations across the continental United States.

14 SOLAR ENERGY↗
DOE OSTI2025

Assessing modifications to the Abdul-Razzak and Ghan aerosol activation parameterization (version ARG2000) to improve simulated aerosol–cloud radiative effects in the UK Met Office Unified Model (UM version 13.0)

The representation of aerosol activation is a key source of uncertainty in global composition-climate model simulations of aerosol–cloud interactions. The Abdul-Razzak and Ghan (ARG) activation parameterization is used in several global and regional models that employ modal aerosol microphysics schemes. In this study, we investigate the ability of the ARG parameterization to reproduce simulations with a cloud parcel model and find its performance is sensitive to the geometric standard deviations (widths) of the lognormal aerosol modes. We recommend adjustments to three constant parameters in the ARG equations, which improve the performance of the parameterization for small mode widths and its ability to simulate activation in polluted conditions. For the accumulation mode width of 1.4 used in the Met Office Unified Model (UM), the modifications decrease the mean bias in the activated fraction of aerosols compared to a cloud parcel model from −6.6 % to +1.2 %. We implemented the improvements in the UM and compared simulated global cloud droplet concentrations with satellite observations. The simulated cloud radiative effect changes by −1.43 W m −2 (6 %) and aerosol indirect radiative forcing over the industrial period changes by −0.10 W m −2 (10 %).

Ghosh, Pratapaditya [Carnegie Mellon University, P↗
NASA NTRS1995

Diabatic forcing and intialization with assimilation of cloud water and rainwater in a forecast model

In this study, diabatic forcing, and liquid water assimilation techniques are tested in a semi-implicit hydrostatic regional forecast model containing explicit representations of grid-scale cloud water and rainwater. Diabatic forcing, in conjunction with diabatic contributions in the initialization, is found to help the forecast retain the diabatic signal found in the liquid water or heating rate data, consequently reducing the spinup time associated with grid-scale precipitation processes. Both observational Special Sensor Microwave/Imager (SSM/I) and model-generated data are used. A physical retrieval method incorporating SSM/I radiance data is utilized to estimate the 3D distribution of precipitating storms. In the retrieval method the relationship between precipitation distributions and upwelling microwave radiances is parameterized, based upon cloud ensemble-radiative model simulations. Regression formulae relating vertically integrated liquid and ice-phase precipitation amounts to latent heating rates are also derived from the cloud ensemble simulations. Thus, retrieved SSM/I precipitation structures can be used in conjunction with the regression-formulas to infer the 3D distribution of latent heating rates. These heating rates are used directly in the forecast model to help initiate Tropical Storm Emily (21 September 1987). The 14-h forecast of Emily's development yields atmospheric precipitation water contents that compare favorably with coincident SSM/I estimates.

Raymond, William H.↗