Search NASA⌕ Search

SEARCH · Search NASA

Results for “COFs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Amine-functionalized porous organic polymers for carbon dioxide capture

Recent developments in CO 2 capture using porous organic polymers (POPs) have received accrescent attention due to their sorbent properties such as high CO 2 uptake capacity and selectivity, tunable chemical structure and permanent porosity. POPs are constructed using two and/or three-dimensional organic monomers (building blocks) linked to each other through covalent bonding, creating high porosity. The pore structure in POPs is exceptionally stable, which leads to their cyclable CO 2 adsorption performance. However, POPs generally suffer from low CO 2 uptake and selectivity due to their interaction with CO 2 in physisorption limits (20–40 kJ mol -1 ). Similar to that in other physisorbents, the CO 2 uptake capacity of POPs further decreases under humid conditions. Pursuant to these limitations, amine functionalization in POPs has resulted in enhanced CO 2 uptake performance with improved CO 2 selectivity over non-polar gases such as N 2 . More importantly, several types of amine-functionalized POPs showed that the CO 2 uptake could remain intact under humid conditions such as in post-combustion flue gas. This review article covers recent developments in amine-functionalized porous organic polymers. Three main categories of amine functionalization, such as direct amine synthesis, amine impregnation and amine grafting, were investigated in detail by considering the effect of amines on the sorbent properties and CO 2 capture performance of POPs. The recent findings in amine-functionalized POPs were investigated including porous polymeric networks (PPNs), covalent organic frameworks (COFs), amine linked POPs, hyper-crosslinked polymers (HCPs), conjugated microporous polymers (CMPs), benzimidazole linked polymers (BILPs), porous aromatic frameworks (PAFs) and polymers of intrinsic microporosity (PIMs).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tuning CO 2 uptake capacity in covalent organic frameworks via metal doping

Covalent organic framework (COF) structures have been synthesized and doped with Cu 2+ , Mn 2+ , and Zn 2+ . Incorporation of a phenol moiety increases metal doping capacity by 2–5% by mass, and results in increased CO 2 adsorption by as much as 40%, compared to undoped structures. Interestingly, gas uptake is improved even though the incorporation of cations in the pore lowers the overall surface area of the structures.

Root, Harrison Duane [Sandia National Laboratories↗
DOE OSTI2022

Spin-phonon dispersion in magnetic materials

Microscopic coupling between the electron spin and the lattice vibration is responsible for an array of exotic properties from morphic effects in simple non magnets to magnetodielectric coupling in multiferroic spinels and hematites. Traditionally, a single spin–phonon coupling constant is used to characterize how effectively the lattice can affect the spin, but it is hardly enough to capture novel electromagnetic behaviors to the full extent. Here, we introduce a concept of spin–phonon dispersion to project the spin moment change along the phonon crystal momentum direction, so the entire spin change can be mapped out. Different from the phonon dispersion, the spin–phonon dispersion has both positive and negative frequency branches even in the equilibrium ground state, which correspond to the spin enhancement and spin reduction, respectively. Our study of bcc Fe and hcp Co reveals that the spin force matrix, that is, the second-order spatial derivative of spin moment, is similar to the vibrational force matrix, but its diagonal elements are smaller than the off-diagonal ones. This leads to the distinctive spin–phonon dispersion. Furthermore, the concept of spin–phonon dispersion expands the traditional Elliott-Yafet theory in nonmagnetic materials to the entire Brillouin zone in magnetic materials, thus opening the door to excited states in systems such as CoF 2 and NiO, where a strong spin-lattice coupling is detected in the THz regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Advancing Continuous Manufacturing of Metal Organic Frameworks [Abstract]

InnaVenture has succeeded in developing a pilot-scale facility implementing a radically new concept for synthesis of metal-organic framework (MOF) materials based upon a patent-pending evaporative aerosolization-condensation process developed at PNNL. The successful synthesis of kilogram quantities of Ni-MOF-74 in InnaVenture’s facility represents a major step in the advancement of MOFs from being novelty materials to industrial adsorbents. Using this approach, fifteen kilograms of Ni-MOF-74 were synthesized for use in a demonstration adsorption chiller developed for the U.S. Navy. However, the evaporative condensation method for MOF synthesis has so far only been demonstrated for synthesizing MOFs under conditions where the reactants are part of a single homogeneous liquid phase solvent system. For InnaVenture to expand opportunities to support broader commercial applications of MOFs and related nanoporous materials (e.g., metal-aromatic frameworks (MAFs), covalent organic frameworks (COFs)), extension of the method to heterogeneous mixed phase conditions is essential. Examples of commercially promising MOFs that require such synthesis conditions include but are not limited to MIL-101, MIL-88B, MIL-100, MOF-801, MIL-160, MOF-841, and many others. InnaVenture has also informed PNNL that they need to address problems with the low density of MOF particles being generated in their fluidized reactor system. The purpose of this effort is to address both of these challenges.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Alternative Materials Literature Review: A Review of Alternative Materials for Xenon Capture in Comparison to AgZ-PAN

A collaborative literature review between Idaho National Laboratory (INL) and Pacific National Laboratory (PNNL) was conducted to research alternative metals/materials for xenon adsorption in gaseous effluents generated from used nuclear fuel (UNF) reprocessing. The review was conducted to research sorbents that could outperform silver mordenite (AgZ) at ambient temperature. The use of silver requires complex and expensive waste disposal processes due to it being an RCRA metal, therefore alternative materials need to be researched and evaluated. The report details two different types of sorbent material: alternative zeolite materials and non-zeolite-based materials (i.e., MOFs, COFs, etc.). This report documents a brief history of the materials, what testing has been conducted on them, and what results suggest the possibility of outperforming the silver-based materials. Sorbent performance characteristics such as durability, capacity, and operating temperatures were evaluated. The simplicity of the sorbents was also evaluated, meaning how they are acquired (synthesized vs. naturally abundant). Recommendations were made for the most promising sorbents based on available research in the subject area and these recommended sorbents will be tested in the upcoming fiscal year. The recommended sorbents that are zeolite based are CHA zeolites, ZIF-69, and Na-ETS-10. The recommended sorbents that are non-zeolite based are SBMOF-1 and CC3.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Covalent integration of polymers and porous organic frameworks

Covalent integration of polymers and porous organic frameworks (POFs), including metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), represent a promising strategy for overcoming the existing limitations of traditional porous materials. This integration allows for the combination of the advantages of polymers, i.e., flexibility, processability and chemical versatility etc., and the superiority of POFs, like the structural integrity, tunable porosity and the high surface area, creating a type of hybrid materials. These resulting polymer-POF hybrid materials exhibit enhanced mechanical strength, chemical stability and functional diversity, thus opening up new opportunities for applications across a large variety of fields, such as gas separation, catalysis, biomedical applications, environmental remediation and energy storage. In this review, an overview of synthetic routes and strategies on how to covalently integrate different polymers with various POFs is discussed, especially with a particular focus on methods like polymerization within, on and among POF structures. To investigate the unique properties and functions of these resultant hybrid materials, the characterization techniques, including nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and scanning electron microscopy (SEM), gas adsorption analysis (BET) and computational modeling and machine learning, are also presented. The ability of polymer-POFs to manipulate the pore environments at the molecular level affords these materials a wide range of applications, providing a versatile platform for future advancements in material science. Looking forward, to fully realize the potential of these hybrid materials, the authors highlight the scalability, green synthesis methods, and potential for stimuli-responsive polymer-POF materials as critical areas for future research.

Hossain, Md Amjad↗
DOE OSTI2025

Mechanical and Tribological Performance of Additively Manufactured Nanocrystalline Aluminum via Cryomilling and Cold Spray

In this study, nanocrystalline (NC) aluminum (Al) and magnesium (Mg)-doped Al bulk components were fabricated using a hybrid manufacturing process that combines cryomilling and high-pressure cold spray (HPCS) additive deposition techniques. Yttria-stabilized zirconia (YSZ) was also added during the HPCS process to improve deposition efficiency and build-up thickness via peening. The evolution of morphology, crystallite size, and elemental composition of both cryomilled powders and cold-sprayed (CS’ed) components was systematically characterized using X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). Mechanical characterization was performed using Vickers microhardness and uniaxial tensile testing, while the tribological behavior was assessed using sliding wear tests under dry/lubricated conditions. XRD analysis revealed that increased cryomilling duration led to significant crystallite refinement, which directly correlated with enhanced hardness and strength. This mechanical strengthening was accompanied by an increase in coefficient of friction (COF) and lower wear rates. The results also showed that the Mg-doped Al exhibited superior hardness, tensile strength, and tribological performance compared to pure Al. The study further explores the underlying mechanisms responsible for these enhancements, highlighting the potential of solute-assisted grain boundary stabilization in tailoring high-performance NC Al alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental Comparison of Elastomeric Materials for Hydraulic Seal Durability under Reciprocating Conditions

Wave Energy Converters (WECs) rely on hydraulic Power Take-Off (PTO) systems to transform the kinetic energy of ocean waves into electricity, where hydraulic seals play a critical role in preventing fluid leakage and ensuring watertight operation under harsh marine conditions. However, seal degradation due to wear, fatigue, and corrosion remains a key challenge limiting system reliability and increasing maintenance costs. In this study, the tribological performance of elastomeric materials for hydraulic sealing applications that are based on commercial polyurethane and custom-compounded Ethylene Propylene Diene Monomer (EPDM) is investigated. Using a CSM tribometer, reciprocating wear tests were conducted in accordance with ASTM G133 under dry sliding conditions, with normal loads ranging from 3 to 10 N, and sliding speeds of 10 to 30 mm/s. Coefficient of friction (COF), specific wear rate, and worn surface morphology are evaluated to understand how load, velocity, and material composition affect seal durability. Improved wear stability and high Shore A hardness (93–94) were demonstrated by the commercial thermoplastic polyurethane (Duralast 4203 and 4758). EPDM-based compounds showed different filler-dependent behaviors, formulations filled with carbon black (E3) had the lowest wear rate (1.45 × 10?4 mm³ N?¹ m?¹) and increased load-bearing capacity, while samples modified with silica and plasticizer (E4, E5) had better conformability and damping but less hardness. Compounded EPDMs showed wider deformation zones because of their lower modulus and filler-matrix interfacial fluctuations, while commercial grades exhibited shallower wear scars (= 380 µm), according to optical profilometry. The Archard model-based lifetime estimation showed that, under 10 N and 30 mm/s, operational endurance ranged from 3.1 to 6.2 years. Because of its low wear rate and steady interfacial behavior, E3 had the longest anticipated life. For medium-load hydraulic sealing applications, these results demonstrate the possibility of customized EPDM formulations as affordable substitutes for commercial polyurethanes. They also offer a quantitative foundation for material selection and lifespan prediction.

Durability↗
NASA NTRS1985

Conformational properties, torsional potential, and vibrational force field for methacryloyl fluoride - An ab initio investigation

The structure, torsional potentials, vibrational spectra, and harmonic force fields for s-cis and s-trans isomers of methacryloyl fluoride are examined to understand the conformational properties of the molecules and their relationship to macroscopic polymer properties. The structure is found to be in good agreement with experiment. It is shown by calculations that the energy difference between the cis and the transisomers is less than 1 kcal/mol at both the split valence and the split valence polarized levels, with the trans form favored. Analysis of the torsional potentials indicates that a rigid rotor model provides a reasonable description of the motion of the COF group in the molecule. The torsional barrier to interconvert the s-trans to the s-cis form is found to be 7.0 kcal/mol. A fit of the data to a three-term Fourier series shows that it is possible to reproduce the experimentally derived barrier, even though a direct determination indicates that the barrier is higher.

Laskowski, B. C.↗
NASA NTRS1986

Design considerations for joints in deployable space truss structures

All of the structures considered for the Control of Flexible Structures (COFS) flight experiments are deployable truss structures and their response will be dominated by the structural response of the joints. To prepare for these experiments some fundamental research work is being conducted in the Structures and Dynamics Division at LaRC which will provide insight into structurally efficient and predictable deployable truss joints. This work involves generic studies of the static and dynamic response of joints as well as the development of analytical models which can be used to predict the response of a large multijointed truss. In addition to the generic joint studies, the research effort encompasses the design and fabrication of a 20-meter long deployable truss beam for laboratory evaluation of its structural characteristics and correlation with developed prediction methods. The experimental results have indicated the importance of attention to detail in the design and fabrication of joints for deployable truss structures. The dimensional relations and material considerations for efficient pin-clevis joints have been outlined. Results of tests on the near-center latch are discussed.

Rhodes, Marvin D.↗
NASA NTRS1986

Multidisciplinary analysis of actively controlled large flexible spacecraft

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

Cooper, Paul A.↗
NASA NTRS1987

Controls-structures-electromagnetics interaction program

A technology development program is described involving Controls Structures Electromagnetics Interaction (CSEI) for large space structures. The CSEI program was developed as part of the continuing effort following the successful kinematic deployment and RF tests of the 15 meter Hoop/Column antenna. One lesson learned was the importance of making reflector surface adjustment after fabrication and deployment. Given are program objectives, ground based test configuration, Intelsat adaptive feed, reflector shape prediction model, control experiment concepts, master schedule, and Control Of Flexible Structures-II (COFS-II) baseline configuration.

Grantham, William L.↗
NASA NTRS1987

System identification of a truss type space structure using the multiple boundary condition test (MBCT) method

Experimental results on the application of the multiple boundary condition test (MBCT) method to experimental hardware have validated its usefulness in the ground testing of large flexible space structures. Excellant results were obtained with a beam with a uniform cross-section and with a beam consisting of two different cross-sections alternately located. The MBCT method is then applied to a 12 bay MAST type structure which is part of the NASA COFS program, and the cross-sectional area of the updated mathematical model was found to be within 4.5 percent of the true value.

Kuo, C. P.↗
NASA NTRS1987

Optimal placement of excitations and sensors for verification of large dynamical systems

The computationally difficult problem of the optimal placement of excitations and sensors to maximize the observed measurements is studied within the framework of combinatorial optimization, and is solved numerically using a variation of the simulated annealing heuristic algorithm. Results of numerical experiments including a square plate and a 960 degrees-of-freedom Control of Flexible Structure (COFS) truss structure, are presented. Though the algorithm produces suboptimal solutions, its generality and simplicity allow the treatment of complex dynamical systems which would otherwise be difficult to handle.

Salama, M.↗
NASA NTRS1987

Assessment of the COFSI/MAST I project

The COFS (MAST I) deployer/retractor assembly (DRA) which has a cluster of mechanisms that constitute the collapsible/extensible Mast, contains mechanisms/linkages that deploy and retract. The Mast is a flexible spatial (3D) linkage with hinges that lock into place during deployment to form a truss type structure. It is 60 meters long with repeating sections of two bays. Each bay has alternating diagonals. All joints are single degree-of-freedom hinges, arranged such that the Mast does not rotate during deployment/restow and that deformation energy is minimized. Mispan hinges are incorporated in the diagonals and half of the batten members. The various operational aspects and characteristics of the various mechanisms within the DRA are analyzed. In view of the disadvantages of statical in determinancy as well as the inefficiencies inherent in recirculating gear trains, it is recommended that the bevel gear trains and the bell-crank mechanisms be redesigned.

Chew, Meng-Sang↗
NASA NTRS1988

Motion synchronization of a mechanism to deploy and restow a truss beam

The functions of the Control of Flexible Structures I (COFS I) deployer and retractor assembly (DRA) are primarily to deploy and retract the Mast I beam, and secondarily to latch, unlatch, and restow the DRA mechanism. The problems associated with the diagonal folding mechanism that retracts the beam is presented, the synchronization requirements critical to the process of restowing the beam is discussed, and a proposed solution to the problem of synchronization between the mechanical systems is presented. In addition, a detailed description is presented of the design and functioning of the DRA.

Lucy, M.↗