Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONCENTRATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Stress concentration in the vicinity of a hole defect under conditions of Hertzian contact

Two-dimensional photoelastic stress analyses were conducted for epoxy resin models containing a hole defect under the conditions of Hertzian contact. Stress concentrations around the defect were determined as a function of several parameters. These were hole diameter, its vertical distance from the contact surface, and the horizontal distance from the Hertzian contact area. Also determined was the effect of tangential traction (generated by a friction coefficient of 0.1) on the stress concentration. Sharp stress concentrations occur in the vicinity of both the left and the right side of the hole. The stress concentration becomes more distinct the larger the hole diameter and the smaller the distance between the hole and the contact surface. The stress concentration is greatest when the disk imposing a normal load is located at the contact surface directly over the hole. The magnitude and the location of stress concentration varies with the distance between the Hertzian contact area and the hole. Taking into account the stress amplitude, the area which can be involved in a process of rolling contact fatigue seems to be confined to a shallow region at both sides of the hole. The effect of tangential traction is comparatively small on the stress concentration around the hole.

Yamamoto, T.↗
NASA NTRS1986

Variation of the urban NO2 concentration during a ground inversion situation

In February 1985 the NO2 concentration over Goeteborg, a major Swedish city, was monitored during two inversion situations. The differential absorption technique was employed and the results show the build-up of the concentration. In this experiment the laser beam was scanned horizontally over Goeteborg. The results were presented as maps over the NO2 concentration distribution. For security reasons the beam was not parallel to the ground, which gives a height gradient in some measurements. During the measurement period the NO2 concentration variation build-up from the morning to the afternoon was monitored. Great concentration variations were seen. Later the mixing below the inversion layer, resulting in a more uniform, high concentration was seen. The breakdown of the inversion when stronger winds start was also seen. Comparisons with a traditional point-measuring chemiluminiscence instrument and an optical method DOAS (Differential Optical Absorption Spectroscopy), were made. The results are discussed. Strong spatial concentration variations are shown by the lidar measurements. For a point-measuring system, the instrument must be very carefully placed since its location will strongly influence the values it gives.

Sunesson, A.↗
NASA NTRS1987

Shuttle Imaging Radar B (SIR-B) Weddell Sea ice observations - A comparison of SIR-B and scanning multichannel microwave radiometer ice concentrations

Ice concentrations over the Weddell Sea were studied using SIR-B data obtained during the October 1984 mission, with special attention given to the effect of ocean waves on the radar return at the ice edge. Sea ice concentrations were derived from the SIR-B data using two image processing methods: the classification scheme at JPL and the manual classification method at Scott Polar Research Institute (SPRI), England. The SIR ice concentrations were compared with coincident concentrations from the Nimbus-7 SMMR. For concentrations greater than 40 percent, which was the smallest concentration observed jointly by SIR-B and the SMMR, the mean difference between the two data sets for 12 points was 2 percent. A comparison between the JPL and the SPRI SIR-B algorithms showed that the algorithms agree to within 1 percent in the interior ice pack, but the JPL algorithm gives slightly greater concentrations at the ice edge (due to the fact that the algorithm is affected by the wind waves in these areas).

Martin, Seelye↗
NASA NTRS1989

Solar Concentrator Advanced Development Program

The Solar Concentrator Advanced Development Project has successfully designed, fabricated, and tested a full scale prototypical solar dynamic concentrator for space station applications. A Truss Hexagonal Panel reflector was selected as a viable solar concentrator concept to be used for space station applications. This concentrator utilizes a modular design approach and is flexible in attainable flux profiles and assembly techniques. The detailed design of the concentrator, which included structural, thermal and optical analysis, identified the feasibility of the design and specific technologies that were required to fabricate it. The needed surface accuracy of the reflectors surface was found to be very tight, within 5 mrad RMS slope error, and results in very close tolerances for fabrication. To meet the design requirements, a modular structure composed of hexagonal panels was used. The panels, made up of graphite epoxy box beams provided the strength, stiffness and dimensional stability needed. All initial project requirements were met or exceeded by hardware demonstration. Initial testing of structural repeatability of a seven panel portion of the concentrator was followed by assembly and testing of the full nineteen panel structure. The testing, which consisted of theodolite and optical measurements over an assembly-disassembly-reassembly cycle, demonstrated that the concentrator maintained the as-built contour and optical characteristics. The facet development effort within the project, which included developing the vapor deposited reflective facet, produced a viable design with demonstrated optical characteristics that are within the project goals.

Knasel, Don↗
NASA NTRS1990

The variations of CO and O3 concentrations in a region subject to biomass burning

Carbon monoxide (CO) and ozone (O3) concentrations have been observed in the Brazilian Amazon region, at a site strongly affected by biomass burning (Cuiaba, 16 deg S, 58 deg W). Time variations are described for the first long-term program of studying the effect of biomass burning on O3 and CO over a complete seasonal cycle, including the seasonal maxima of 1987 and 1988. In order to obtain elements for comparison, an identical observational program was maintained at a site totally outside of the direct influence of biomass burning (Natal, 6 deg S, 35 deg W). The biomass burning contribution to the Cuiaba concentrations of CO and O3 is very large. Diurnal maxima concentrations exceeded 90 ppbv O3 in 1987 and 120 ppbv O3 in 1988, in September. For the wet season, the monthly average ozone concentration in March-April is about 10 ppbv. During the month of maxima, September, the O3 concentration average was 41 ppbv for 1987 and 71 ppbv for 1988. The CO concentrations are about 90 ppbv in the wet season. In September, 460 ppbv and 660 ppbv of CO were observed for 1987 and 1988, respectively. At Natal the seasonal variation is of the order of a factor of 2. During the wet season, the concentrations of CO and O3 at both stations are about the same.

Kirchhoff, V. W. J. H.↗
NASA NTRS1990

Finite element analysis of thermal distortion effects on optical performance of solar dynamic concentrator for Space Station Freedom

An analysis was performed to predict the thermal distortion of the solar dynamic concentrator for Space Station Freedom in low earth orbit and to evaluate the effects of that thermal distortion on concentrator on-orbit performance. The analysis required substructural finite element modeling of critical concentrator structural subsystems, structural finite element modeling of the concentrator, mapping of thermal loading onto the structural finite element model, and the creation of specialized postprocessors to assist in interpreting results. Concentrator temperature distributions and thermally induced displacements and slope errors and the resulting receiver flux distribution profiles are discussed. Results determined for a typical orbit indicate that concentrator facet rotations are less than 0.2 mrad and that the change in facet radius due to thermal flattening is less than 5 percent. The predicted power loss due to thermal distortion effects is less than 0.3 percent. As a consequence the thermal distortions of the solar dynamic concentrator in low earth orbit will have a negligible effect on the flux distribution profiles within the receiver.

Doherty, Michael P.↗
NASA NTRS1996

Concentration Measurements in a Cold Flow Model Annular Combustor Using Laser Induced Fluorescence

A nonintrusive concentration measurement method is developed for determining the concentration distribution in a complex flow field. The measurement method consists of marking a liquid flow with a water soluble fluorescent dye. The dye is excited by a two dimensional sheet of laser light. The fluorescent intensity is shown to be proportional to the relative concentration level. The fluorescent field is recorded on a video cassette recorder through a video camera. The recorded images are analyzed with image processing hardware and software to obtain intensity levels. Mean and root mean square (rms) values are calculated from these intensity levels. The method is tested on a single round turbulent jet because previous concentration measurements have been made on this configuration by other investigators. The previous results were used to comparison to qualify the current method. These comparisons showed that this method provides satisfactory results. 'Me concentration measurement system was used to measure the concentrations in the complex flow field of a model gas turbine annular combustor. The model annular combustor consists of opposing primary jets and an annular jet which discharges perpendicular to the primary jets. The mixing between the different jet flows can be visualized from the calculated mean and rms profiles. Concentration field visualization images obtained from the processing provide further qualitative information about the flow field.

Morgan, Douglas C.↗
NASA NTRS2000

The Impact of Sea Ice Concentration Accuracies on Climate Model Simulations with the GISS GCM

The Goddard Institute for Space Studies global climate model (GISS GCM) is used to examine the sensitivity of the simulated climate to sea ice concentration specifications in the type of simulation done in the Atmospheric Modeling Intercomparison Project (AMIP), with specified oceanic boundary conditions. Results show that sea ice concentration uncertainties of +/- 7% can affect simulated regional temperatures by more than 6 C, and biases in sea ice concentrations of +7% and -7% alter simulated annually averaged global surface air temperatures by -0.10 C and +0.17 C, respectively, over those in the control simulation. The resulting 0.27 C difference in simulated annual global surface air temperatures is reduced by a third, to 0.18 C, when considering instead biases of +4% and -4%. More broadly, least-squares fits through the temperature results of 17 simulations with ice concentration input changes ranging from increases of 50% versus the control simulation to decreases of 50% yield a yearly average global impact of 0.0107 C warming for every 1% ice concentration decrease, i.e., 1.07 C warming for the full +50% to -50% range. Regionally and on a monthly average basis, the differences can be far greater, especially in the polar regions, where wintertime contrasts between the +50% and -50% cases can exceed 30 C. However, few statistically significant effects are found outside the polar latitudes, and temperature effects over the non-polar oceans tend to be under 1 C, due in part to the specification of an unvarying annual cycle of sea surface temperatures. The +/- 7% and 14% results provide bounds on the impact (on GISS GCM simulations making use of satellite data) of satellite-derived ice concentration inaccuracies, +/- 7% being the current estimated average accuracy of satellite retrievals and +/- 4% being the anticipated improved average accuracy for upcoming satellite instruments. Results show that the impact on simulated temperatures of imposed ice concentration changes is least in summer, encouragingly the same season in which the satellite accuracies are thought to be worst. Hence the impact of satellite inaccuracies is probably less than the use of an annually averaged satellite inaccuracy would suggest.

Parkinson, Claire L.↗
NASA NTRS2001

The Mechanism Responsible for High Concentrations of Be-7 in the Near Space

In 1990 an unexpectedly high concentration of Be-7 was discovered on the LDEF satellite surface, facing in the RAM direction. The search for an explanation of this high concentration of Be-7 which is in thermal equilibrium in the upper atmosphere, led the researchers to the hypothesis of Be-7 transport by vertical turbulent fluxes from deeper layers in the Earth's atmosphere, where Be-7 is produced as a result of nuclear reactions between solar energetic protons (which penetrated there after a solar flare) and terrestrial atmosphere elements. The experiments carried out during 1995-1999 on 'Resource F1' and 'Cosmos' satellites not only confirmed the existence of high Be-7 concentrations at altitudes of about 200 km, but also permitted to establish correlation between the concentration of Be-7 in the upper atmosphere and flare activity on the Sun. More detailed analysis of the whole set of experimental data on Be-7 measurements at satellite altitudes showed, that the appearance of high Be-7 concentrations in the upper atmosphere of the Earth is a more complicated phenomenon. Two more mechanisms , explaining the observed effect can be indicated. Firstly, the observed concentrations could be associated with direct penetration of energetic Be-7 nuclei, originating in flares, into the terrestrial atmosphere. Calculations show, that in solar cosmic rays the flux of Be-7 nuclei should be maximum in comparison to the fluxes of other Beryllium isotopes. Secondly, the high concentration of Be-7 in the upper atmosphere of the Earth could be explained by solar wind penetration through the polar zones. Theoretical analysis of active processes including flares, occurring in the solar atmosphere, leads to the conclusion, that radioactive Beryllium is constantly present in the solar atmosphere, and, possibly, is the main isotope of solar Beryllium.

Panasyuk, M. I.↗
NASA NTRS2001

Correlation Studies of Sea Ice Concentration with Surface Temperature and Meltponding

The spatial and temporal variability of sea ice concentrations derived from passive microwave data is studied in conjunction with co-registered high resolution infrared and visible satellite data. Cloud free infrared and visible data provide surface temperature and large scale surface characteristics, respectively, that can be used to better understand regional and seasonal fluctuations in ice concentrations. Results from correlation analysis of ice concentration versus surface temperature data show the intuitively expected negative relationship but the strength in the relationship is unexpectedly very strong. In the Antarctic, the correlation is consistently very high spatially when yearly anomalies are used, and not so high in some areas when seasonal anomalies are used, especially during spring and summer. In the monthly anomalies, the correlation is also good, especially in dynamically active regions. The expanse in the anomalies in surface temperature are shown to go way beyond the sea ice regions into the open ocean and continental areas, suggesting strong atmospheric forcing. Weak correlations are normally found in highly consolidated areas, where large changes in temperature do not cause large changes in ice concentration on a short term, and in open ocean polynya areas, where the change in ice concentration may be cause by melt from the underside of the ice. In the Arctic, strong correlations between surface temperature and ice concentration are evident for all seasons except during the summer. In the summer, factors such as meltponding, surface wetness, and ice breakup, as detected by high resolution visible data, contributes to larger uncertainties in the determination of ice concentration and the lack of good correlation of the variables.

Comiso, J. C.↗
NASA NTRS2003

Concentration and Velocity Gradients in Fluidized Beds

In this work we focus on the height dependence of particle concentration, average velocity components, fluctuations in these velocities and, with the flow turned off, the sedimentation velocity. The latter quantities are measured using Particle Imaging Velocimetry (PIV). The PIV technique uses a 1-megapixel camera to capture two time-displaced images of particles in the bed. The depth of field of the imaging system is approximately 0.5 cm. The camera images a region with characteristic length of 2.6 cm for the small particles and 4.7 cm. for the large particles. The local direction of particle flow is determined by calculating the correlation function for sub-regions of 32 x 32 pixels. The velocity vector map is created from this correlation function using the time between images (we use 15 to 30 ms). The software is sensitive variations of 1/64th of a pixel. We produce velocity maps at various heights, each consisting of 3844 velocities. We break this map into three vertical zones for increased height information. The concentration profile is measured using an expanded (1 cm diameter) linearly polarized HeNe Laser incident on the fluidized bed. A COHU camera (gamma=1, AGC off) with a lens and a polarizer images the transmitted linearly polarized light to minimize the effects of multiply scattered light. The intensity profile (640 X 480 pixels) is well described by a Gaussian fit and the height of the Gaussian is used to characterize the concentration. This value is compared to the heights found for known concentrations. The sedimentation velocity is estimated using by imaging a region near the bottom of the bed and using PIV to measure the velocity as a function of time. With a nearly uniform concentration profile, the time can be converted to height information. The stable fluidized beds are made from large pseudo-monodisperse particles (silica spheres with radii (250-300) microns and (425-500) microns) dispersed in a glycerin/water mix. The Peclet number is sufficiently large that Brownian motion of the particles can be ignored and the Reynolds number sufficiently small that particle inertia is negligible. A packed particle bed is used to randomize and disperse the flowing fluid introduced by a peristaltic pump. The bed itself is a rectangular glass cell 8 cm wide (x), 0.8 cm deep and a height of 30.5 cm (z). The depth of field of the camera is approximately 0.5 cm so depth information is averaged. Over flow fluid is returned to the reservoir making a closed loop system. In these experiments the particles form a sediment approximately 5.7 cm high with the pump off and expand to 22 cm with the pump on. For the smaller particles the pump velocity is .5 millimeters per second and 1.1 millimeters per second for the large particles. At this concentration the bed has a very well defined top where particle concentration rapidly drops to zero.

McClymer, James P.↗
NASA NTRS1991

Potassium concentration effect on growth, gas exchange and mineral accumulation in potatoes

This study was conducted to evaluate the responses of potatoes to six K solution concentrations maintained with a flow-through nutrient film system. Potato plants were grown for 42 days in sloping shallow trays containing a 1 cm layer of quartz gravel with a continuous flow of 4 ml min-1 of nutrient solutions having K concentrations of 0.10, 0.55, 1.59, 3.16, 6.44, 9.77 meq L-1. Plant leaf area, total and tuber dry weights were reduced over 25% at 0.10 meq L-1 of K and over 17% at 9.77 meq L-1 of K compared to concentrations of 0.55, 1.59, 3.16 and 6.44 meq L-1 of K. Gas exchange measurements on leaflets in situ after 39 days of growth demonstrated no significant differences among different K treatments in CO2 assimilation rate, stomatal conductance, intercellular CO2 concentration, and transpiration. Further measurements made only on plants grown at 0.10, 1.59, 6.44 meq L-1 of K showed similar responses of CO2 assimilation rate to different intercellular CO2 concentrations. This suggested that the photosynthetic systems were not affected by different K nutrition. The leaves of plants accumulated about 60% less K at 0.10 meq L-1 of K than at higher K concentrations. However, Ca and Mg levels in the leaves were higher at 0.10 meq L-1 of K than at higher K concentrations. This indicates that low K nutrition not only reduced plant growth, but also affected nutrient balance between major cations.

Non-NASA Center↗
NASA NTRS2012

Purifying, Separating, and Concentrating Cells From a Sample Low in Biomass

Frequently there is an inability to process and analyze samples of low biomass due to limiting amounts of relevant biomaterial in the sample. Furthermore, molecular biological protocols geared towards increasing the density of recovered cells and biomolecules of interest, by their very nature, also concentrate unwanted inhibitory humic acids and other particulates that have an adversarial effect on downstream analysis. A novel and robust fluorescence-activated cell-sorting (FACS)-based technology has been developed for purifying (removing cells from sampling matrices), separating (based on size, density, morphology), and concentrating cells (spores, prokaryotic, eukaryotic) from a sample low in biomass. The technology capitalizes on fluorescent cell-sorting technologies to purify and concentrate bacterial cells from a low-biomass, high-volume sample. Over the past decade, cell-sorting detection systems have undergone enhancements and increased sensitivity, making bacterial cell sorting a feasible concept. Although there are many unknown limitations with regard to the applicability of this technology to environmental samples (smaller cells, few cells, mixed populations), dogmatic principles support the theoretical effectiveness of this technique upon thorough testing and proper optimization. Furthermore, the pilot study from which this report is based proved effective and demonstrated this technology capable of sorting and concentrating bacterial endospore and bacterial cells of varying size and morphology. Two commercial off-the-shelf bacterial counting kits were used to optimize a bacterial stain/dye FACS protocol. A LIVE/DEAD BacLight Viability and Counting Kit was used to distinguish between the live and dead cells. A Bacterial Counting Kit comprising SYTO BC (mixture of SYTO dyes) was employed as a broad-spectrum bacterial counting agent. Optimization using epifluorescence microscopy was performed with these two dye/stains. This refined protocol was further validated using varying ratios and mixtures of cells to ensure homogenous staining compared to that of individual cells, and were utilized for flow analyzer and FACS labeling. This technology focuses on the purification and concentration of cells from low-biomass spacecraft assembly facility samples. Currently, purification and concentration of low-biomass samples plague planetary protection downstream analyses. Having a capability to use flow cytometry to concentrate cells out of low-biomass, high-volume spacecraft/ facility sample extracts will be of extreme benefit to the fields of planetary protection and astrobiology. Successful research and development of this novel methodology will significantly increase the knowledge base for designing more effective cleaning protocols, and ultimately lead to a more empirical and true account of the microbial diversity present on spacecraft surfaces. Refined cleaning and an enhanced ability to resolve microbial diversity may decrease the overall cost of spacecraft assembly and/or provide a means to begin to assess challenging planetary protection missions.

Benardini, James N.↗
NASA NTRS2013

The Paradox of a Wet (High H2O) and Dry (Low H2O/Ce) Mantle: High Water Concentrations in Mantle Garnet Pyroxenites from Hawaii

Water dissolved as trace amounts in anhydrous minerals has a large influence on the melting behavior and physical properties of the mantle. The water concentration of the oceanic mantle is inferred from the analyses of Mid-Ocean Ridge Basalt (MORB) and Oceanic Island Basalt (OIB). but there is little data from actual mantle samples. Moreover, enriched mineralogies (pyroxenites, eclogites) are thought as important sources of heterogeneity in the mantle, but their water concentrations and their effect on the water budget and cycling in the mantle are virtually unknown. Here, we analyzed by FTIR water in garnet clinopyroxenite xenoliths from Salt Lake Crater, Oahu, Hawaii. These pyroxenites are high-pressure (>20kb) crystal fractionates from alkalic melts. The clinopyroxenes (cpx) have 260 to 576 ppm wt H2O, with the least differentiated samples (Mg#>0.8) in the 400-500 ppm range. Orthopyroxene (opx) contain 117-265 ppm H2O, about half of that of cpx, consistent with other natural sample studies, but lower than cpx/opx equilibrium from experimental data. The pyroxenite cpx and opx H2O concentrations are at the high-end of on-and off-craton peridotite xenolith concentrations and those of Hawaiian spinel peridotites. In contrast, garnet has extremely low water contents (<5ppm H2O). There is no correlation between H2O in cpx and lithophile element concentrations. Phlogopite is present in some samples, and its modal abundance shows a positive correlation in Mg# with cpx, implying equilibrium. However, there is no correlation between H2O concentrations and or the presence of phlogopite. These data imply that cpx and opx may be at water saturation, far lower than experimental data suggest. Reconstructed bulk rock pyroxenite H2O ranges from 200-460 ppm (average 331 +/- 75 ppm), 2 to 8 times higher than H2O estimates for the MORB source (50-200 ppm), but in the range of E-MORB, OIB and the source of rejuvenated Hawaiian magmas. The average bulk rock pyroxenite H2O/Ce is 69 +/-35, lower than estimates of the MORB source (approx 150) or FOZO, C (200-250) mantle component, but consistent with "dry" EM sources (<100). These data suggest that a metasomatized, refertilized oceanic lithosphere that contains pyroxenitic veins (e.g. the lower part of an oceanic plate, where ascending melts can become trapped and crystallize), will have both higher water concentrations and low H2O/Ce, and may contribute to EM-type OIB sources, like that of Samoa basalts. Therefore, a low H2O/Ce mantle source may not necessarily be "dry".

Peslier, Anne H.↗
NASA NTRS2023

Fine particulate concentrations over East Asia derived from aerosols measured by the Advanced Himawari Imager using machine learning

Fine particulate matter with a diameter below 2.5 μm (PM 2.5 ) is deleterious to the cardiovascular and respiratory systems. It is often difficult to assess the effects of PM 2.5 on human health over regions with limited ground monitoring sites, especially in East Asia. As an alternative, we estimated near-surface PM 2.5 concentrations by analyzing Advanced Himawari Imager (AHI) Yonsei Aerosol Retrieval (YAER) products. This study incorporates daytime data for East Asia covering the Korean Peninsula, China, Japan, Southeast Asia, and southern Mongolia. We collocated AHI YAER product pixels with meteorological, land-cover, and other ancillary data for the period from March 2018 to February 2019. To estimate PM 2.5 concentrations over wide areas spanning many countries displaying various relationships between aerosol optical depth and PM 2.5 , monthly models were developed by considering both the spatial and temporal characteristics of ground-based PM 2.5 measurements. Random forest machine learning model estimated ground-level mass concentrations of PM 2.5 ; subsequent 10-fold cross validation (CV) yielded a CV R 2 value of 0.81 and a CV root mean squared error (RMSE) of 12.3 μg m -3 . We investigated the spatial pattern of PM 2.5 concentrations over multiple countries and seasonal variation in PM 2.5 concentrations. Diurnal variation of a severe PM 2.5 event in the Korean Peninsula was investigated as a case study. The model captured the extremely heterogeneous spatial distribution of PM 2.5 concentrations peaked around local noon. To measure the capability of the developed model to estimate PM 2.5 concentrations in areas with few in-situ data, its predictive performance was evaluated using a dataset independent of the training process with an R 2 of 0.60 and RMSE of 8.18 μg m −3 . This study demonstrates the potential for satellite-based PM 2.5 estimation for areas with insufficient measuring stations.

Pm2.5↗
NASA NTRSDate not supplied

Nitric Oxide Concentrations from Solar Maximum to Solar Minimum Years Derived from SABER

Nitric oxide (NO) is of particular importance in the upper atmosphere nominally the region between 100 km and 250 km, as it plays the role in cooling and regulating the energy budget of the system. The NO cooling rates have been routinely derived for the past two decades from the measurements made by Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument on the Thermosphere Ionosphere Mesosphere Energetics and Dynamics satellite (TIMED) satellite since 2002. However, a comprehensive long-term dataset of global thermospheric NO concentration as a function of local time is currently unavailable. Given that solar activity significantly influences NO abundance on timescales ranging from days to decades, analyzing the behavior of NO concentration during solar storm and solar cycle can provide valuable insights into thermospheric energy balance, improving storm-time and climatological knowledge. In this study, we used newly calculated NO cooling rates and simulations of neutral kinetic temperature and atomic oxygen number density from the MSIS 2.1 model to derive 20-year NO concentration data. The global annual mean NO concentration shows a strong correlation with the solar cycle, with high concentrations and upper boundaries up to 250 km during solar maximum years and lower concentrations and upper boundaries up to ~230 km during solar minimum years. We also compared NO concentrations obtained from SABER measurements and MSIS 2.1 simulations during solar maximum (2014) and solar minimum (2009) years and found good agreement between the two during both day and night.

Ningchao Wang↗
DOE OSTI2020

Concentrating photovoltaic retrofit for existing parabolic trough solar collectors: Design, experiments, and levelized cost of electricity

Photovoltaics and concentrating solar thermal power are two ways for generating electricity from sunlight, albeit through different methods. Parabolic trough style powerplants represent 3.6 GW of electricity production, but many of these plants are aging and being replaced with photovoltaics. An alternative option that could be employed to leverage the sunk capital cost associated with the primary optics would be the design of a pure photovoltaic retrofit working within the existing plant architecture. Here, a secondary optical concentrator is designed to use the existing primary optics of a parabolic trough type solar thermal powerplant. The design is a v-shaped secondary concentrator resulting in a predicted concentration ratio on a 20 mm wide target of 94. The concentrating photovoltaic receiver for retrofit of an RP-3 based parabolic trough has been constructed using multi-junction concentrator photovoltaic cells and experimentally demonstrated here for the first time. Calculated performance of the cells based on cell specifications should result in 31% efficiency at 85 °C. On-sun efficiencies were measured at an average value of 21% with operational temperatures between 55 and 120 °C. Levelized cost of electricity calculations predict the system to have the potential to be below 7¢/kWh based on predicted efficiencies and 13¢/kWh based on the measured values at cell costs of $5/cm 2 .

14 SOLAR ENERGY↗
DOE OSTI2021

Using concentrating-solar-power plants as economic carbon-free capacity resources

Deep decarbonization of electricity systems raises concerns about the need for generating capacity that can maintain reliable energy supply. Given this concern, we explore the ability of concentrating-solar-power plants with thermal energy storage to provide a carbon-free source of such capacity. We develop an approach to assessing the capacity contribution of concentrating-solar-power plants that considers future systems. Such considerations are important, because of potential differences in net-load patterns compared to today (e.g., due to higher renewable-energy penetrations). Using historical data spanning an 18-year period, we demonstrate that concentrating-solar-power plants with thermal energy storage can provide this necessary capacity with little impact on their financial viability. We examine the impact of myopic decisions and imperfect foresight of future system conditions on the operation of concentrating-solar-power plants and the resultant impact on their capacity contributions. We find that imperfect foresight can have limited impacts on such a use of concentrating-solar-power plants, so long as proper forecasting techniques are developed and used. Overall, our work shows that concentrating-solar-power plants with thermal energy storage may have a role to play in delivering reliable electricity supply in a decarbonized energy system.

14 SOLAR ENERGY↗