Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONICAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Computer program for calculating supersonic flow on the windward side conical delta wings by the method of lines

A user's manual is presented for a program that calculates the supersonic flow on the windward side of conical delta wings with shock attached at the sharp leading edge by the method of lines. The program also has a limited capability for computing the flow about circular and elliptic cones at incidence. It provides information including the shock shape, flow field, isentropic surface-flow properties, and force coefficients. A description of the program operation, a sample computation, and a FORTRAN 4 program listing are included.

Klunker, E. B.↗
NASA NTRS1972

Evaluation of boundary layer transition criteria for space shuttle orbiter entry

A comparison was made of the effect of boundary layer transition on center-line heating in a conical and a normal-shock flow field. It was shown that the time of transition onset (and, hence, the heating parameter) is significantly influenced by the choice of transition criterion in the normal-shock flow but that this parameter is much less sensitive to the transition criterion in a conical flow field. An evaluation of the effects of boundary layer transition on center-line heating in the conical flow field has shown that the temperatures are less affected by the use of various transition crieria than are heat loads. This difference is due to the delay in the time of transition onset predicted by those criteria with high transition Reynolds numbers. The criteria which predict the most severe thermal environment are those of fully turbulent flow throughout the entry, because transition occurs early in the trajectory for each of these criteria, they tend to predict similar values of maximum temperature and total heat load especially at center-line locations aft of 0.6. Evaluation of center-line heating generated by various trajectory shaping approaches has shown that the maximum surface temperature distribution was not significantly affected by the shaping technique. However, the heat load distribution is influenced, particularly on the forward portion of the vehicle.

Helms, V. T., III↗
NASA NTRS1978

Calculation of supersonic viscous flow over delta wings with sharp subsonic leading edges

Two complementary procedures were developed to calculate the viscous supersonic flow over conical shapes at large angles of attack, with application to cones and delta wings. In the first approach the flow is assumed to be conical and the governing equations are solved at a given Reynolds number with a time-marching explicit finite-difference algorithm. In the second method the parabolized Navier-Stokes equations are solved with a space-marching implicit noniterative finite-difference algorithm. This latter approach is not restricted to conical shapes and provides a large improvement in computational efficiency over published methods. Results from the two procedures agree very well with each other and with available experimental data.

Vigneron, Y. C.↗
NASA NTRS1978

Calculation of supersonic viscous flow over delta wings with sharp subsonic leading edges

Two complementary procedures have been developed to calculate the viscous supersonic flow over conical shapes at large angles of attack, with application to cones and delta wings. In the first approach the flow is assumed to be conical and the governing equations are solved at a given Reynolds number with a time-marching explicit finite-difference algorithm. In the second method the parabolized Navier-Stokes equations are solved with a space-marching implicit noniterative finite-difference algorithm. This latter approach is not restricted to conical shapes and provides a large improvement in computational efficiency over published methods. Results from the two procedures agree very well with each other and with available experimental data.

Vigneron, Y. C.↗
NASA NTRS1959

Investigation on the use of a Freely Rotating Rotor at the Cowl Face of a Supersonic Conical Inlet to Reduce Inlet Flow Distortion

An investigation has been made on the use of a freely rotating rotor at the cowl face of a supersonic conical diffuser to determine its effectiveness in reducing inlet flow distortion and the penalty in terms of total-pressure loss imposed by such a device when distortions are negligible. Tests were made with a rotor having an inlet tip diameter of 2.18 inches and a ratio of hub radius to tip radius of 0.52, in conjunction with a conical inlet having a 25 deg semi-vertex cone angle, at a Mach number of 2.1 over an angle-of-attack range of 0 deg to 8 deg. A simplified analysis showing that a supersonic, freely rotating rotor with maximum solidity for noninterference between blades will operate in an undistorted flow with a total-pressure defect of 1 percent or less was experimentally verified. Overall total-pressure distortions of 0.1 to 0.4 and Mach number distortions of 0.4 to 1.4, obtained at 4 deg to 8 deg angle of attack, were reduced about 30 percent and 23 percent, respectively, because of the presence of the rotor, with no measurable total-pressure loss. The rotor increased the peak total-pressure recovery at the simulated combustion chamber 1 1/2 and 3 1/2 percent at 6 deg and 8 deg angles of attack, respectively. This increase is attributed to lower diffusion duct losses as a consequence of a more uniform flow created by the rotor.

Goldberg, Theodore J.↗
NASA NTRS1979

Internal corner flow fields

A computational procedure has been developed to predict the inviscid super/hypersonic flow field of conical internal corners. The prediction of internal corner flow fields can be important in the design of supersonic 'box' type inlets. The computational procedure utilizes a second order finite difference marching technique to asymptote to the conical corner flow solution of Euler's equations. These flow fields are dominated by complex shock interactions. All discontinuities, shocks and slip surfaces are fitted with the appropriate jump conditions. The 'triple' points (the interaction of two shocks and a slip surface) are also computed exactly. Computed results are compared with experimental data and the computational results of other investigators. In addition, the sensitivity of these flow fields to a number of geometric parameters is studied, and the impact of these flows on inlet performance is assessed.

Marconi, F.↗
NASA NTRS1993

Conical Euler analysis and active roll suppression for unsteady vortical flows about rolling delta wings

A conical Euler code was developed to study unsteady vortex-dominated flows about rolling, highly swept delta wings undergoing either forced motions or free-to-roll motions that include active roll suppression. The flow solver of the code involves a multistage, Runge-Kutta time-stepping scheme that uses a cell-centered, finite-volume, spatial discretization of the Euler equations on an unstructured grid of triangles. The code allows for the additional analysis of the free to-roll case by simultaneously integrating in time the rigid-body equation of motion with the governing flow equations. Results are presented for a delta wing with a 75 deg swept, sharp leading edge at a free-stream Mach number of 1.2 and at 10 deg, 20 deg, and 30 deg angle of attack alpha. At the lower angles of attack (10 and 20 deg), forced-harmonic analyses indicate that the rolling-moment coefficients provide a positive damping, which is verified by free-to-roll calculations. In contrast, at the higher angle of attack (30 deg), a forced-harmonic analysis indicates that the rolling-moment coefficient provides negative damping at the small roll amplitudes. A free-to-roll calculation for this case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation, which is characteristic of highly swept delta wings. This limit cycle oscillation may be actively suppressed through the use of a rate-feedback control law and antisymmetrically deflected leading-edge flaps. Descriptions of the conical Euler flow solver and the free-to roll analysis are included in this report. Results are presented that demonstrate how the systematic analysis of the forced response of the delta wing can be used to predict the stable, neutrally stable, and unstable free response of the delta wing. These results also give insight into the flow physics associated with unsteady vortical flows about delta wings undergoing forced motions and free-to-roll motions, including the active suppression of the wing-rock type phenomenon. The conical Euler methodology developed is directly extend able to three-dimensional calculations.

Lee-Rausch, Elizabeth M.↗
NASA NTRS1952

Pressure recovery, drag, and subcritical stability characteristics of conical supersonic diffusers with boundary-layer removal

A study of two 20 degrees half-angle, low mass-flow ratio conical supersonic inlets with cone boundary-layer bleed was made on a 16-inch ram-jet engine in the Lewis 8- by 6-foot supersonic wind tunnel. A greater stable subcritical range of operation was obtained with the bleed inlets than with the corresponding inlet without boundary-layer bleed. The drag added by the bleed system was small.

Obey, Leonard T↗
NASA NTRS1989

Calculating Flows In Turbomachine Channels

Noniterative integral-entrainment method yields good approximations. Method of approximate calculation of flow in channel of turbomachine based on interaction of viscous flow in boundary layers with inviscid flow in core layer. Faster and more robust than other approximate methods of same type. Suitable for use in preliminary calculations for design and for off-design operation of turbomachinery. Flows in conical diffuser channels represented by two-dimensional boundary-layer and one-dimensional core flows described by equations of new method.

Schumann, Lawrence F.↗
NASA NTRS2011

Wedge and Conical Probes for the Instantaneous Measurement of Free-Stream Flow Quantities at Supersonic Speeds

Wedge and conical shaped probes for the measurement of free-stream flow quantities at supersonic speeds have been tested in both wind tunnel and flight. These probes have improved capabilities over similar ones used in the past. Through the use of miniature pressure sensors, that are located inside the probes, they are able to provide instantaneous measurements of a time-varying environment. Detailed herein are the results of the tests in NASA Langley Researcher Center s Unitary Plan Wind Tunnel (UPWT) at Mach numbers of 1.6, 1.8 and 2.0, as well as flight tests carried out at the NASA Dryden Flight Research Center (DFRC) on its F-15 aircraft up to Mach numbers of 1.9. In the flight tests the probes were attached to a fixture on the underside of the F-15 fuselage. Problems controlling the velocity of the flow through the conical probe, required for accurate temperature measurements, are noted, as well as some calibration problems of the miniature pressure sensors that impact the accuracy of the measurements.

Bobbitt, Percy J.↗
NASA NTRS1952

Pressure Recovery, Drag, and Subcritical Stability Characteristics of Three Conical Supersonic Diffusers at Stream Mach Numbers from 1.7 to 2.0

A study of a 20 degree and a 25 degree half-angle high mass-flow ratio conical supersonic inlet was made on a 16-inch ram jet in the 8- by 6-foot supersonic tunnel. A greater range of stable subcritical operation was obtained with the low mass-flow ratio inlets; a greater range was obtained with the 25 degree than with the 20 degree half-angle low mass-flow ratio inlet. The high mass-flow ratio inlet had the least drag.

DIFFUSERS, SUPERSONIC↗
NASA NTRS1951

Investigation at Mach Number 1.91 of Side and Base Pressure Distributions over Conical Boattails Without and with Jet Flow Issuing from Base

Experimental side and bade pressure distributions over a series of conical boattails without and with jet flow from the base are presented at a Mach number of 1.91. For the case of no jet flow the methods of characteristics and linearized theory are shown to overpredict the side pressure drag. A semi-empirical theory is presented to predict the effect of boattail angle on base pressure. With the boattail extending to a sharp edge at the nozzle exit, the over-pressure jet is shown to decrease the side pressure drag. Presence of an annular base may eliminate the effect of the jet on the side pressure drag, but the jet effect on the base pressure drag may greatly increase or decrease the total boattail drag.

FLOW, JET MIXING↗
NASA NTRS1987

Aeroacoustics of supersonic jet flows from contoured and solid/porous conical plug-nozzles

The results of an experimental study of the acoustic far-field, the shock associated noise, and the nature of the repetitive shock structure of supersonic jet flows issuing from plug-nozzles having externally-expanded plugs with pointed termination operated at a range of supercritical pressure ratios Xi approaching 2 to 4.5 are reported. The plug of one of these plug-nozzles was contoured. The other plug-nozzles had short conical plugs with either a solid surface or a combination of solid/porous surface of different porosities. The contoured and the uncontoured plug-nozzles had the same throat area and the same annulus-radius ratio K = R sub p/R sub N = 0.43. As the result of modifications of the shock structure, the acoustic performance of improperly expanded jet flows of an externally-expanded short uncontoured plug of an appropriate geometry with suitably perforated plug and a pointed termination, is shown to approach the acoustic performance of a shock-free supersonic jet issuing from an equivalent externally-expanded contoured plug-nozzle.

Dosanjh, Darshan S.↗
NASA NTRS1991

On the quasi-conical flowfield structure of the swept shock wave-turbulent boundary layer interaction

The swept oblique shock-wave/turbulent-boundary-layer interaction generated by a 20-deg sharp fin at Mach 4 and Reynolds number 21,000 is investigated via a series of computations using both conical and three-dimensional Reynolds-averaged Navier-Stokes equations with turbulence incorporated through the algebraic turbulent eddy viscosity model of Baldwin-Lomax. Results are compared with known experimental data, and it is concluded that the computed three-dimensional flowfield is quasi-conical (in agreement with the experimental data), the computed three-dimensional and conical surface pressure and surface flow direction are in good agreement with the experiment, and the three-dimensional and conical flows significantly underpredict the peak experimental skin friction. It is pointed out that most of the features of the conical flowfield model in the experiment are observed in the conical computation which also describes the complete conical streamline pattern not included in the model of the experiment.

Knight, Doyle D.↗
NASA NTRS1988

A model for intensity profiles of dust jets near the nucleus of Comet Halley

The Giotto spacecraft's Halley Multicolor Camera images have been used to derive intensity profiles of the jetlike dust features that are associated with active regions of the Comet Halley nucleus. An intensity profile's asymptotic behavior at a radius greater than 100 km from the nucleus can be seen as arising from a source located at a hypothetical point below the active source region. Several source distributions are investigated. The extended source model considers divergent dust flow from an active area of arbitrary shape. It is concluded that the surface is neither smooth nor homogeneous, but must instead be characterized by varying curvature and roughness in order to reflect the observed conical dust flow.

Huebner, W. F.↗