Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONVECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Stellar convection. II - A multimode numerical solution for convection in spheres

A stable, equilibrium solution for convection in a self-gravitating sphere of Boussinesq fluid was computed by using a modal analysis in which the theta, phi dependence of the fluid is expanded in a set of 168 spherical harmonics. The temperature, velocity, and convective flux of the fluid as well as the kinetic and thermal energy spectra as functions of wavelength are computed. The spectra are found to be in agreement with both experimental observations and analytic scaling laws. The dynamics of the energy cascade is examined by computing the ratio of the amount of energy dissipation at a particular wavelength to the amount of energy produced at that same wavelength. It is found that there is only a slight cascade of kinetic energy to smaller wavelengths but a large cascade of thermal energy.

Marcus, P. S.↗

The development of convective instability, wind shear, and vertical motion in relation to convection activity and synoptic systems in AVE 4

Data from the Fourth Atmospheric Variability Experiment were used to investigate conditions/factors responsible for the development (local time rate-of-change) of convective instability, wind shear, and vertical motion in areas with varying degrees of convective activity. AVE IV sounding data were taken at 3 or 6 h intervals during a 36 h period on 24-25 April 1975 over approximately the eastern half of the United States. An error analysis was performed for each variable studied.

Davis, J. G.↗

Magnetic fields in the radiative interior of stars. I Thermal shadows and forced convection. II - Forced convection and the Li-7 abundance

A theoretical model is developed for thermal shadows of magnetic inhomogeneities and their effects in the radiative cores of stars such as the sun. It is shown that the shadows cause a slight decrease of gas pressure, thereby lowering the opacity and raising the effective heat transport. The shadows produced by the inhomogeneities induce thermal gradients and therefore forced convection. If the field strength is at least 400,000 gauss partial Li-7 depletion will occur due to destruction in convection-dominated thermonuclear reactions. The scale of the field would need to be 30,000 km.

Parker, E. N.↗

Observed structural variability of deep moist convection within a mesoscale convective system

Some radar observations of the convective cloud structure within and around a developing mesoscale convective system (MCS), which attained an eventual horizontal dimension of approximately 100 by 200 km, are reported. Similarities in cloud structure within and outside the MCS include a downshear tilt of the cloud precipitation core and generation of new cells toward the direction of cloud motion and parallel to the major axis of the cloud line. The systematic difference in the longevity and intensity of the clouds is examined.

Knupp, Kevin R.↗

Comments on "The Sensitivity Study of Radiative-Convective Equilibrium in the Tropics with a Convective Resolving Model"

In general, there are two broad scientific objectives when using cloud resolving models (CRMs or cloud ensemble models-CEMs) to study tropical convection. The first one is to use them as a physics resolving models to understand the dynamic and microphysical processes associated with the tropical water and energy cycles and their role in the climate system. The second approach is to use the CRMs to improve the representation of moist processes and their interaction with radiation in large-scale models. In order to improve the credibility of the CRMs and achieve the above goals, CRMs using identical initial conditions and large-scale influences need to produce very similar results. Two CRMs produced different statistical equilibrium (SE) states even though both used the same initial thermodynamic and wind conditions. Sensitivity tests to identify the major physical processes that determine the SE states for the different CRM simulations were performed. Their results indicated that atmospheric horizontal wind is treated quite differently in these two CRMs. The model that had stronger surface winds and consequently larger latent and sensible heat fluxes from the ocean produced a warmer and more humid modeled thermodynamic SE state. In addition, the domain mean thermodynamic state is more unstable for those experiments that produced a warmer and more humid SE state. Their simulated wet (warm and humid) SE states are thermally more stable in the lower troposphere (from the surface to 4-5 km in altitude). The large-scale horizontal advective effects on temperature and water vapor mixing ratio are needed when using CRMs to perform long-term integrations to study convective feedback under specified large-scale environments. In addition, it is suggested that the dry and cold SE state simulated was caused by enhanced precipitation but not enough surface evaporation. We find some problems with the interpretation of these three phenomena.

Tao, W.-K.↗

High-Fidelity CFD Simulation of Mixed Convection and Forced Convection in a Pebble Bed Test Reactor Core

The Hermes low-power [35-MW(thermal)] reactor will be built and operated by Kairos Power LLC (KP) to demonstrate its fluoride salt-cooled high-temperature reactor (FHR) technology. In the KP FHR, the reactor core is composed of randomly packed pebbles with TRISO fuel particles inside with FLiBe flow upward through the core acting as a coolant. Previous numerical and experimental studies have been limited to either a small-size bed or to a lack of detailed measurements for heat transfer. Here, to address the lack of high-fidelity heat transfer data in a real-size FHR core, in this study, we simulated a pebble bed core with 34 374 pebbles randomly packed, similar to the Hermes reactor's size. The core radius was 14 times that of the pebble diameter, while the core height was 45 times. In this work, we were particularly interested in a mixed convection regime, where buoyancy is important. Therefore, we performed several large-eddy simulations at different Reynolds numbers (160 to 1000) with gravitational force included. The spectral element computational fluid dynamics code NekRS with graphics processing unit acceleration was used for this study. The low-Mach number approximation was applied to address property changes in the FLiBe and to account for buoyancy. A pure hexahedral mesh with 60 million elements was generated by the Voronoi cell method. At the polynomial order of 5, the total degrees of freedom was 7.5 billion. The developed case in this work is the first of its kind in terms of size and complexity. The local numerical data across the domain were obtained and compared with empirical correlations. After examining the data, we found the following conclusions. For pressure drop, the Reger correlation predicted less than a 5% error. On the other hand, for heat transfer, the Wakao correlation outperformed the others. Based on our findings, we recommend the use of the Wakao correlation for the Nusselt number calculation, and for pressure drop, the KTA (Kerntechnischer Ausschuss) correclation, among the available experimental correlations. In conclusion, the Reger direct numerical simulation-driven correlation for pressure drops should also be considered, given its best agreement with our calculations.

Mixed Convection↗

The relationship between large-scale and convective states in the tropics - Towards an improved representation of convection in large-scale models

This report summarises an investigation into the relationship of tropical thunderstorms to the atmospheric conditions they are embedded in. The study is based on the use of radar observations at the Atmospheric Radiation Measurement site in Darwin run under the auspices of the DOE Atmospheric Systems Research program. Linking the larger scales of the atmosphere with the smaller scales of thunderstorms is crucial for the development of the representation of thunderstorms in weather and climate models, which is carried out by a process termed parametrisation. Through the analysis of radar and wind profiler observations the project made several fundamental discoveries about tropical storms and quantified the relationship of the occurrence and intensity of these storms to the large-scale atmosphere. We were able to show that the rainfall averaged over an area the size of a typical climate model grid-box is largely controlled by the number of storms in the area, and less so by the storm intensity. This allows us to completely rethink the way we represent such storms in climate models. We also found that storms occur in three distinct categories based on their depth and that the transition between these categories is strongly related to the larger scale dynamical features of the atmosphere more so than its thermodynamic state. Finally, we used our observational findings to test and refine a new approach to cumulus parametrisation which relies on the stochastic modelling of the area covered by different convective cloud types.

54 ENVIRONMENTAL SCIENCES↗

Dynamical conditions of ice supersaturation and ice nucleation in convective systems: A comparative analysis between in situ aircraft observations and WRF simulations: Ice Supersaturation in Convective System

Occurrence frequency and dynamical conditions of ice supersaturation (ISS, where relative humidity with respect to ice (RHi) > 100%) are examined in the upper troposphere around convective activity. Comparisons are conducted between in situ airborne observations and the Weather Research and Forecasting model simulations using four double-moment microphysical schemes at temperatures ≤-40°C. All four schemes capture both clear-sky and in-cloud ISS conditions. However, the clear-sky (in-cloud) ISS conditions are completely (significantly) limited to the RHi thresholds of the Cooper parameterization. In all of the simulations, ISS occurrence frequencies are higher by ~3–4 orders of magnitude at higher updraft speeds (>1 m s -1 ) than those at the lower updraft speeds when ice water content (IWC) > 0.01 g m -3 , while observations show smaller differences up to ~1–2 orders of magnitude. The simulated ISS also occurs less frequently at weaker updrafts and downdrafts than observed. These results indicate that the simulations have a greater dependence on stronger updrafts to maintain/generate ISS at higher IWC. At lower IWC (≤0.01 g m -3 ), simulations unexpectedly show lower ISS frequencies at stronger updrafts. Overall, the Thompson aerosol-aware scheme has the closest magnitudes and frequencies of ISS >20% to the observations, and the modified Morrison has the closest correlations between ISS frequencies and vertical velocity at higher IWC and number density. The Cooper parameterization often generates excessive ice crystals and therefore suppresses the frequency and magnitude of ISS, indicating that it should be initiated at higher ISS (e.g., ≥25%).

54 ENVIRONMENTAL SCIENCES↗

South Asian monsoon precipitation in CMIP5: a link between inter-model spread and the representations of tropical convection

CMIP5 models exhibit a mean dry bias and a large inter-model spread in simulating Indian monsoon precipitation but the origins of the bias and spread have not been well understood. Using moisture and energy budget analysis that exploits the weak temperature gradients in the tropics, we show that they are linked to the convection simulated over the equatorial Indian Ocean. About half of the 21 models analyzed operate at the steep gradient of the non-linear relationship between the normalized precipitable water and normalized precipitation, where small differences in the former are amplified as large differences in precipitation. These models preferentially produce higher precipitation over the equatorial Indian Ocean, and contribute disproportionately to the inter-model spread and multi-model mean dry bias in monsoon precipitation. Conversely, models on the flat side of the relationship are in better agreement with each other and with observations. Under the RCP8.5 forcing scenario, models on the steep part of the relationship project stronger response to warming and dominate the inter-model spread in the projection. This study identified the normalized precipitable water as a key metric for understanding the behavior of model simulated equatorial and Indian monsoon precipitation.

Hagos, Samson (ORCID:0000000175919933)↗

Magnetic Field-Driven Convection for Directed Surface Patterning of Colloids

Drying sessile droplets is a promising route to transform colloidal dispersions into surface coatings, which are widely used in material design and biochemical detection. However, directing the assembly of the particles within drying droplets and achieving surface patterns beyond the well-known coffee-ring formation remain a challenge. Here, we present a new principle of directing the assembly of nonmagnetic colloidal particles dispersed in a magnetic fluid and generating unusual surface patterns. We use the ability of ferrofluids to change phases with the application of magnetic fields to program the assembly of nonmagnetic microparticles present in drying sessile droplets. We show that in the absence of external magnetic field, the superparamagnetic nanoparticles in the magnetic fluid are spontaneously transported to the droplet edge because of solvent evaporation. This nanoparticle transport leads to the formation of nanoparticle-rich edge and nanoparticle-depleted center of the drying droplet. Upon the application of a uniform external magnetic field, the asymmetry in the magnetic nanoparticle distribution drives a magnetostatic convection and finger-like instability from the droplet edge to the center. This magnetic microconvection from droplet edge-to-center reverses the particle transport from center-to-edge, well-known for drying droplets in the absence of external field. We use this magnetostatic microconvection to assemble secondary nonmagnetic microspheres in droplets, overwriting ring formation and direct their assembly into four distinct kinetically stable states. As a result, the method presented here offers an active control over the colloidal assembly achieved by drying sessile droplets and thus enables a new route for fabricating complex patterns and functional surface coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of E3SM Simulated Aerosols and Aerosol‐Cloud Interactions Across GCM and Convection‐Permitting Scales

This paper introduces an Earth system modeling testbed for predicting aerosols and aerosol‐cloud interactions (ACIs) at convection‐permitting scales. Using the Energy Exascale Earth System Model (E3SM) version 2 with a four‐mode Modal Aerosol Module, we conduct simulations at 3.25 km resolution on a regionally refined mesh (RRM) across four regions with distinct aerosol and cloud regimes. Results are compared with the standard 100 km E3SM configuration and evaluated against satellite, aircraft, and ground‐based observations. We find that increasing model resolution improves heavy precipitation simulation but amplifies positive bias in light drizzle at coarse resolution. These resolution‐induced changes affect cloud and aerosol properties to varying degrees across regions. Generally, cloud cover and liquid water path (LWP) show better agreement with satellite retrievals at 3.25 km, though surface‐based comparisons suggest otherwise. Aerosol composition remains poorly represented at both resolutions. The RRM increases Aitken mode aerosol number concentrations via enhanced new particle formation. However, accumulation mode aerosols are decreased at higher resolution as aerosol removals become more efficient. This partially contributes to fewer cloud condensation nuclei (CCN) and lower cloud droplet number concentrations (N d ), which produces larger model biases in some scenarios. These findings suggest that solely increasing horizontal resolution to kilometer scales is insufficient to broadly improve aerosol and cloud predictions without concurrent advancements in physical and chemical process representations. Nonetheless, the RRM moderately improves key ACI relationships such as CCN‐N d correlation, reflecting enhanced aerosol activation representation. The LWP‐N d relationship is also better captured by RRM, suggesting a better characterization of LWP adjustment.

Huang, Meng [Pacific Northwest National Laboratory↗

GPM IMERG V07B and V06B: Evaluation Using Ground-Based Radar Observations and Application in Global Mesoscale Convective System Tracking

This study evaluates the latest Global Precipitation Measurement (GPM) Integrated Multi-satellitE Retrievals for GPM (IMERG V07B) against its predecessor V06B, for studying mesoscale convective systems (MCSs). Both versions are compared using ground-based radar and rain gauge data from five meteorologically diverse regions: the contiguous United States (including eastern coastlines), Amazon rainforest, central Argentina mountains, equatorial Indian Ocean, and northern Australia across multiple temporal (0.5–6 hours) and spatial scales (0.1°–0.25°). An updated global MCS tracking dataset is developed by integrating satellite-observed infrared brightness temperature with IMERG V07B. Comparation of IMERG against radar observations reveals that IMERG demonstrates better performance in capturing the probability distribution and quantitative contributions of rainfall (from no-rain to intense-rain conditions) over tropical oceans than over land, with marked improvements in IMERG V07B for heavy-to-intense rain (> 10 mm h-1). Over land, systematic biases persist: IMERG tends to overestimate light-to-moderate rain (1–10 mm h-1) while underestimating heavy-to-intense rain. Additionally, aggregating IMERG to coarser resolutions (3-hourly or 0.25°) improves consistency with radar observations, outperforming the 1-hourly/0.1° resolution. The new IMERG V07B-based global MCS dataset exhibits consistent statistical characteristics with the V06B-based dataset, despite lower mean rain rates and reduced heavy precipitation contributions. These findings offer valuable insights for utilizing IMERG V07B in global precipitation studies, MCS characterization, and model evaluation.

Zhang, Sihan↗

Stellar convection 3: Convection at large Rayleigh numbers

A three dimensional study of convection in a self gravitating sphere of Boussinesq fluid with a Rayleigh number of 10 to the 10th power and a Prandtl of 1 is presented. The velocity and temperature of the fluid are computed at the largest wavelengths using spectral methods. A confirmation that the fluid is anisotropic and that the energy spectra are not smooth functions of wavelength but have a large amount of fine structure is discussed. The parameterization of the transport properties of the unresolvable inertial subrange with eddy viscosities and diffusivities is described. The time dependent fluctuations in the energy spectra and how they cascade from large to small wavelengths is examined.

Marcus, P. S.↗

Stellar convection. III - Convection at large Rayleigh numbers

The results of a numerical, three-dimensional study of convection in a self-gravitating sphere of Boussinesq fluid with a Rayleigh number of 10-billion and a Prandtl number of 1 are presented. The velocity and temperature are computed by using spectral methods in the horizontal and finite-differencing in the radial directions. An eddy viscosity and diffusivity are needed to model the subresolution flow. For Rayleigh numbers much less than 10-billion the flows do not have well-defined inertial ranges, and an eddy viscosity and diffusivity cannot be assigned in this self-consistent manner. By computing the energy spectra as well as the detailed energy budgets as a function of wavenumber, it is shown that for Rs = 10-billion there is an inertial range for the modes corresponding to spherical harmonics with l greater than 6.

Marcus, P. S.↗