Search NASA⌕ Search

SEARCH · Search NASA

Results for “CRYSTAL SURFACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Atomistic Modeling of Surface and Bulk Properties of Cu, Pd and the Cu-Pd System

The BFS (Bozzolo-Ferrante-Smith) method for alloys is applied to the study of the Cu-Pd system. A variety of issues are analyzed and discussed, including the properties of pure Cu or Pd crystals (surface energies, surface relaxations), Pd/Cu and Cu/Pd surface alloys, segregation of Pd (or Cu) in Cu (or Pd), concentration dependence of the lattice parameter of the high temperature fcc CuPd solid solution, the formation and properties of low temperature ordered phases, and order-disorder transition temperatures. Emphasis is made on the ability of the method to describe these properties on the basis of a minimum set of BFS universal parameters that uniquely characterize the Cu-Pd system.

Bozzolo, Guillermo↗
DOE OSTI2023

Relaxation dynamics of water in the vicinity of cellulose nanocrystals

Water molecules near cellulose nanocrystals (CNCs; produced via the sulfuric acid-catalyzed hydrolysis of wood pulp) are believed to relax slower than those in the bulk liquid, which may result in unique properties of CNC aqueous dispersions. Herein this study analyzed the polarization behavior of water molecules in CNC aqueous dispersions and other reference samples using a dielectric relaxation spectroscopy (DRS) technique in the microwave frequency range (0.2–20 GHz). As the CNC concentration increases, two slow relaxation components become prominent. The comparison with DRS data of aqueous dispersions of nanoporous silica, polyvinyl alcohol (PVA), and hairy CNC (HCNC) with amorphous chains protruding from both ends suggested that these slow relaxation modes of water near CNC surfaces cannot be attributed to direct hydrogen bonding interactions with the hydroxyl (OH) groups exposed and immobilized at the solid surface. Instead, they are similar to the water molecules interacting with OH groups attached to flexible polymer chains. Molecular dynamics (MD) simulations of the polarization behavior of water near the (110) facet of cellulose Iβ crystals confirmed that the interactions of water molecules with the cellulose crystal surface do not cause slower relaxations in the frequency range studied via the DRS. These results indicated that the CNC surface cannot be depicted with the crystallographic facets of cellulose Iβ; instead, it resembles a polymer-brush surface on which the short glucan residues or fragments of the strong acid-catalyzed hydrolysis process are swollen and extended into the aqueous phase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Achieving Electrode Smoothing by Controlling the Nucleation Phase of Metal Deposition Through Polymer‐Substrate Binding

Polymer additives [like polyethylene oxide (PEO)] are widely used for smooth electrode deposition in aqueous zinc and many other battery systems. However, the precise mechanism by which they regulate morphology and suppress dendrite formation remains unclear. In this study, the knowledge gap is addressed by using in situ electrochemical atomic force microscopy to directly observe the interfacial evolution during Zn electrodeposition and polymer adsorption on Cu substrates in the presence of varying concentrations of ZnSO 4 and PEO. Contrary to previous literature assumptions, which emphasize the binding to the growing Zn crystal surfaces or Zn 2+ ions, the results demonstrate that PEO smooths Zn films by promoting nucleation of (002)-oriented Zn platelets through interactions with the Cu substrate. Density functional theory simulations support this finding by showing that PEO adsorption on Cu modifies the interfacial energy of Zn/Cu/electrolyte interfaces, favoring the stabilization of Zn (002) on the Cu substrate, as well as confines Zn electrodeposition to a narrow near-surface region. In conclusion, these findings elucidate a novel design principle for electrode smoothing, emphasizing the importance of substrate selection paired with polymer additives that exhibit an attractive interaction with the substrate but minimal interaction with growing crystals, offering a mechanistic perspective for improved battery performance.

Electrodeposition↗
DOE OSTI2023

Carrier Recombination Dynamics of Surface-Passivated Epitaxial (100)Ge, (110)Ge, and (111)Ge Layers by Atomic Layer Deposited Al2O3

Germanium (Ge) and its heterostructures with compound semiconductors offer a unique optoelectronic functionality due to its pseudo-bandgap nature, that can be transformed to a direct bandgap material by providing strain and/or mixing with tin. Moreover, two crystal surfaces, (100)Ge and (110)Ge, that are technologically important for ultralow power fin or nanosheet transistors, could offer unprecedented properties with reduced surface defects after passivating these surfaces by atomic layer deposited (ALD) dielectrics. In this work, the crystallographically oriented epitaxial Ge/AlAs heterostructures were grown and passivated with ALD Al2O3 dielectrics, and the microwave photoconductive decay (u-PCD) technique was employed to evaluate carrier lifetimes at room temperature. The X-ray photoelectron spectroscopy analysis reveals no role of orientation effect in the quality of the ALD Al2O3 dielectric on oriented Ge layers. The carrier lifetimes measured using the u-PCD technique were benchmarked against unpassivated Ge/AlAs heterostructures. Excitation wavelengths of 1500 and 1800 nm with an estimated injection level of ~10^13 cm-3 were selected to measure the orientation-specific carrier lifetimes. The carrier lifetime was increased from 390 ns to 565 ns for (100)Ge and from 260 ns to 440 ns for (110)Ge orientations with passivation, whereas the carrier lifetime is almost unchanged for (111)Ge after passivation. This behavior indicates a strong dependence of the measured lifetime on surface orientation and surface passivation. The observed increase (>1.5x) in lifetime with Al2O3-passivated (100)Ge and (110)Ge surfaces is due to the lower surface recombination velocity compared to unpassivated Ge/AlAs heterostructures. The enhancement of carrier lifetime from passivated Ge/AlAs heterostructures with (100)Ge and (110)Ge surface orientations offers a path for the development of nanoscale transistors due to the reduced interface state density.

Al2O3↗
DOE OSTI2020

Surface facet dependence of competing alloying mechanisms

Metal alloys are ubiquitous in many branches of heterogeneous catalysis, and it is now fairly well established that the local atomic structure of an alloy can have a profound influence on its chemical reactivity. While these effects can be difficult to probe in nanoparticle catalysts, model studies using well defined single crystal surfaces alloyed with dopants enable these structure–function correlations to be drawn. The first step in this approach involves understanding the alloying mechanism and the type of ensembles formed. In this study, we examined the atomic structure of RhCu single-atom alloys formed on Cu(111), Cu(100), and Cu(110) surfaces. Our results show a striking difference between Rh atoms alloying in Cu(111) vs the more open Cu(100) and Cu(110) surface facets. Unlike Cu(111) on which Rh atoms preferentially place-exchange with Cu atoms in the local regions above step edges leaving the majority of the Cu surface free of Rh, highly dispersed, homogeneous alloys are formed on the Cu(100) and (110) surfaces. These dramatically different alloying mechanisms are understood by quantifying the energetic barriers for atomic hopping, exchange, swapping, and vacancy filling events for Rh atoms on different Cu surfaces through theoretical calculations. Density functional theory results indicate that the observed differences in the alloying mechanism can be attributed to a faster hopping rate, relatively high atomic exchange barriers, and stronger binding of Rh atoms in the vicinity of step edges on Cu(111) compared to Cu(110) and Cu(100). Furthermore, these model systems will serve as useful platforms for examining structure sensitive chemistry on single-atom alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1974

Track studies of samples 72255 and 72275

Optical microscopic studies of two intermediate pieces of 72255, located 1 to 3 cm below the surface, indicate an upper limit to the track exposure age of 15 to 20 m.y. A striking feature of the track studies of breccias 72255 and 72275 is the peculiar etching behavior of many of the feldspar and olivine crystals. After standard etching procedures, crystal surfaces are frequently irregular and bumpy, presumably owing to nonuniform dissolution of the surface. Although this effect was not observed in feldspars or olivines in samples from other missions, it is apparently widespread among Apollo 17 samples.

Hutcheon, I. D.↗
DOE OSTI2025

Octo-diamond crystal of nanoscale tetrahedra with interchanging chiral motifs

Despite their simplicity, tetrahedra can assemble into diverse high- and low-density structures. Here we report a low-density ‘octo-diamond’ structure formed by nanoscale solid tetrahedra with a 64-tetrahedron unit cell containing 8 cubic-diamond subcells. The formed crystal is achiral, but is composed of chiral bilayers with alternating handedness. The left- and right-handed chirality of the bilayers, combined with the plasmonic nature of the gold tetrahedra, produces chiroptical responses at the crystal surface. We uncover that the hydrophobic substrate facilitates the arrangement of tetrahedra into irregular ring-like patterns, creating a critical, uneven topography to stabilize the observed octo-diamond structure. This study reveals a potent way to affect colloidal crystallization through particle–substrate interactions, expanding the nanoparticle self-assembly toolbox.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Fabrication and surface characterization of composite refractory compounds suitable for thermionic converters

Thermal faceting was observed for the high index planes of LaB6. The (100), (110), and (111) planes were found to be the most thermodynamically stable faces in vacuum in a study of electrode materials for thermionic emitters. The properties of adsorbed carbon, cesium, and cesium-oxygen layers were investigated on LaB6 single crystal surfaces as well as on Zr/0/W(100) and W(100). Cesium was found to increase electron reflection near the collision threshold on LaB6(100) and W(100) and to decrease the reflection on Zr/0/W(100). This difference may be explained by the unusually high threshold reflection coefficient of Zr/0/W without adsorbed cesium.

Davis, P. R.↗
DOE OSTI2023

Modeling of transverse stimulated Raman scattering in KDP/DKDP in large-aperture plates suitable for polarization control

Transverse stimulated Raman scattering (TSRS) in potassium dihydrogen phosphate (KDP) and deuterated potassium dihydrogen phosphate (DKDP) plates for large-aperture, inertial confinement fusion (ICF)-class laser systems is a well-recognized limitation giving rise to parasitic energy conversion and laser-induced damage. The onset of TSRS is manifested in plates exposed to the ultraviolet section of the beam. TSRS amplification is a coherent process that grows exponentially and is distributed nonuniformly in the crystal and at the crystal surfaces. To understand the growth and spatial distribution of TSRS energy in various configurations, a modeling approach has been developed to simulate the operational conditions relevant to ICF-class laser systems. Specific aspects explored in this work include (i) the behavior of TSRS in large-aperture crystal plates suitable for third-harmonic generation and use as wave plates for polarization control in current-generation ICF-class laser system configurations; (ii) methods, and their limitations, of TSRS suppression and (iii) optimal geometries to guide future designs.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Adsorbate chemical environment-based machine learning framework for heterogeneous catalysis

Abstract Heterogeneous catalytic reactions are influenced by a subtle interplay of atomic-scale factors, ranging from the catalysts’ local morphology to the presence of high adsorbate coverages. Describing such phenomena via computational models requires generation and analysis of a large space of atomic configurations. To address this challenge, we present Adsorbate Chemical Environment-based Graph Convolution Neural Network (ACE-GCN), a screening workflow that accounts for atomistic configurations comprising diverse adsorbates, binding locations, coordination environments, and substrate morphologies. Using this workflow, we develop catalyst surface models for two illustrative systems: (i) NO adsorbed on a Pt 3 Sn(111) alloy surface, of interest for nitrate electroreduction processes, where high adsorbate coverages combined with low symmetry of the alloy substrate produce a large configurational space, and (ii) OH* adsorbed on a stepped Pt(221) facet, of relevance to the Oxygen Reduction Reaction, where configurational complexity results from the presence of irregular crystal surfaces, high adsorbate coverages, and directionally-dependent adsorbate-adsorbate interactions. In both cases, the ACE-GCN model, trained on a fraction (~10%) of the total DFT-relaxed configurations, successfully describes trends in the relative stabilities of unrelaxed atomic configurations sampled from a large configurational space. This approach is expected to accelerate development of rigorous descriptions of catalyst surfaces under in-situ conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

X-ray diffraction under grazing incidence conditions

Material properties frequently relate to structures at or near surfaces, particularly in thin films. As a result, it is essential to understand these structures at the molecular and atomistic levels. The most accurate and widely used techniques for characterizing crystallographic order are based on X-ray diffraction. When dealing with thin films or interfaces, standard approaches, such as single crystal or powder diffraction, are not suitable. However, X-ray diffraction under grazing incidence conditions can provide the required information. Here, in this Primer, grazing incidence X-ray diffraction (GIXD) is comprehensively introduced, starting from basic considerations on X-ray diffraction at crystals with reduced dimensionality and the optical properties of X-rays, followed by a more in-depth description of an experimental performance, including X-ray sources, goniometers and detectors. Experimental errors, limitations and reproducibility are discussed. Various applications, from highly ordered inorganic single crystal surfaces to weakly ordered polymer thin films, are presented to illustrate the potential of GIXD. Data visualizations, representations and evaluation strategies are summarized, based on the example of anthracene thin films. The Primer compiles information relevant to perform high-quality GIXD experiments, evaluate data and interpret results, to extend knowledge about X-ray diffraction from surfaces, interfaces and thin films.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Convective flow effects on protein crystal growth

The long-term stability of the interferometric setup for the monitoring of protein morphologies has been improved. Growth or dissolution of a crystal on a 100 A scale can now be clearly distinguished from dimensional changes occurring within the optical path of the interferometer. This capability of simultaneously monitoring the local interfacial displacement at several widely-spaced positions on the crystal surface with high local depth resolution, has already yielded novel results. We found with lysozyme that (1) the normal growth rate is oscillatory, and (2) the mean growth step density is greater at the periphery of a facet than in its center. The repartitioning of Na(+) and Cl(-) ions between lysozyme solutions and crystals was studied for a wide range of crystallization conditions. A nucleation-growth-repartitioning model was developed to interpret the large body of data in a unified way. The results strongly suggests that (1) the ion to lysozyme ratio in the crystal depends mostly on kinetic rather than crystallographic parameters, and (2) lysozyme crystals possess a salt-rich core with a diameter on the order of 10 microns. The computational model for diffusive-convective transport in protein crystallization (see the First Report) has been applied to a realistic growth cell geometry, taking into account the findings of the above repartitioning studies. These results show that some elements of a moving boundary problem must be incorporated into the model in order to obtain a more realistic description. Our experimental setup for light scattering investigations of aggregation and nucleation in protein solutions has been extensively tested. Scattering intensity measurements with a true Rayleigh scatterer produced systematically increased forward scattering, indicating problems with glare. These have been resolved. Preliminary measurements with supersaturated lysozyme solutions revealed that the scatterers grow with time. Work has begun on a computer program for the unified evaluation of simultaneously obtained, multi-angle static and dynamic light scattering data.

Rosenberger, Franz↗
NASA NTRS2003

Modeling Tetragonal Lysozyme Crystal Growth Rates

Tetragonal lysozyme 110 face crystal growth rates, measured over 5 orders of magnitude in range, can be described using a model where growth occurs by 2D nucleation on the crystal surface for solution supersaturations of c/c(sub eq) less than or equal to 7 +/- 2. Based upon the model, the step energy per unit length, beta was estimated to be approx. 5.3 +/- 0.4 x 10(exp -7) erg/mol-cm, which for a step height of 56 A corresponds to barrier of approx. 7 +/- 1 k(sub B)T at 300 K. For supersaturations of c/c(sub eq) > 8, the model emphasizing crystal growth by 2D nucleation not only could not predict, but also consistently overestimated, the highest observable crystal growth rates. Kinetic roughening is hypothesized to occur at a cross-over supersaturation of c/c(sub eq) > 8, where crystal growth is postulated to occur by a different process such as adsorption. Under this assumption, all growth rate data indicated that a kinetic roughening transition and subsequent crystal growth by adsorption for all solution conditions, varying in buffer pH, temperature and precipitant concentration, occurs for c/c(sub eq)(T, pH, NaCl) in the range between 5 and 10, with an energy barrier for adsorption estimated to be approx. 20 k(sub B)T at 300 K. Based upon these and other estimates, we determined the size of the critical surface nucleate, at the crossover supersaturation and higher concentrations, to range from 4 to 10 molecules.

Gorti, Sridhar↗
DOE OSTI2020

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy and adsorbate structure of Ag on dehydrated HCa 2 Nb 3 O 10 (001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated (“dh”) calcium niobate nanosheets “(dh-HCa 2 Nb 3 O 10 (001))” have stoichiometry Ca 4 Nb 6 O 19 . They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below monolayer coverage, Ag grows on dh-HCa 2 Nb 3 O 10 (001) as 2D islands of thickness ~2 layers. The differential heat of Ag adsorption is initially ~303 kJ/mol, increasing slowly to ~338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically towards silver’s heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m 2 , larger than on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. Furthermore, these results demonstrate an easy way to do singlecrystal-type surface science studies - and especially thermochemical measurements - on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh vacuum annealing in O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding CO 2 adsorption on the surfaces of SrO and its hydroxylated variants Sr(OH) 2 · n H 2 O ( n = 0, 1, 8)

Strontium oxide (SrO) is a promising material for CO 2 capture through a reversible cycle of carbonation and calcination, where SrO reacts with CO 2 to form SrCO 3 and can be regenerated by calcination. In the presence of moisture, SrO forms strontium hydroxide and its hydrates (Sr(OH) 2 ·nH 2 O). Here, this study, which employs density functional theory, investigates the CO 2 adsorption mechanism of these processes on various crystal surfaces, including SrO, Sr(OH) 2 , Sr(OH) 2 ·1H 2 O, and Sr(OH) 2 ·8H 2 O. A significant finding is that the interaction of CO 2 with these surfaces leads to carbonate/bicarbonate formation via electron transfer, with notable differences in CO 2 orientation and bond characteristics between SrO surfaces and its hydroxylated surfaces. To explore the effects of moisture on CO 2 adsorption, H 2 O adsorption on these stable surfaces was investigated. The results showed that H 2 O reacts with the SrO (100) surface to form hydroxyl (OH) groups while it bonds with the surfaces of Sr(OH) 2 ·nH 2 O (n = 0, 1, 8) with hydrogen bonding. A small amount of H 2 O can enhance CO2 adsorption while a large amount of H 2 O could decrease the capability of CO 2 adsorption.

CO2 capture↗
DOE OSTI2021

Chemistry of Titanium Deposition Precursors for Area-Selective Deposition of Functionalized Silicon [Posters]

Area-selective atomic layer deposition (AS-ALD) is an appealing bottom-up fabrication technique that can produce atomic-scale device features, overcoming challenges in current industrial techniques such as edge alignment errors. TiCI 4 is a common thermal ALD precursor for Ti0 2 thin films, which are appealing candidates for DRAM capacitors due to their excellent dielectric constants. Hydrogen and chlorine termination passivate the Si surface, allowing for selective deposition of TiCI 4 onto HO-terminated areas. However, selectivity loss occurs after several ALD cycles. Ti oxide nucleates onto surface defects on Cl- and H-Si resists. Previously, the use of H-Si as an ALD resist has been studied extensively, but less work has focused on chemical forces driving nucleation, especially for Cl-Si. Here, formation of defect nuclei was investigated with selectivity loss during Ti0 2 ALD with TiCI 4 and water on the (100) and (111) crystal surfaces of hydrogenated, chlorinated, and oxidized Si.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Containerless processing of fluoride glass

Ground-based experiments on glass formation, crystallization, surface tension, vaporization, and chemical durability of a zirconium-barium-lanthanum (ZBL) fluoride glass are summarized. In a container large, columnar grains grew out from the container-glass interface during cooling. The main crystalline phase was alpha BaZrF6. A ZBL glass sphere was levitated acoustically during Shuttle flight STS-11. The glass was melted and then cooled while being levitated (containerless). Crystallization in the recovered sample was very fine and mainly beta BaZr2F10, showing the influence of the container on the nucleation and microstructure of crystallization in the glass. Glass formation should be easier for a containerless glass than in a container.

Doremus, Robert H.↗
NASA NTRS2004

Growth Modes and Energetics of 101 Face Lysozyme Crystal Growth

From analyses of lysozyme 101 face growth rate data using a 2D nucleation model for layer-by-layer growth, we find the effective barrier for crystal growth to be gamma = 1.0 +/- 0.2 x 10(exp -13) erg/molecule. The magnitude of the effective barrier is 2.4 +/- 0.5 k(sub beta)T, at 22 C. We also find that beyond a critical solution supersaturation, sigma(sub c), crystal growth rates are more accurately described by a kinetic roughening hypothesis. Beyond sigma(sub c), crystals grow by the continuous addition of molecules anywhere on the crystal surface rather than layer-by-layer. The magnitude of the critical supersaturation (sigma(sub c), = 1.7 +/- 0.2) for a crossover from a layer-by-layer to continuous growth is found to be statistically independent of the solution conditions that vary with buffer pH, temperature or precipitant concentration. Using the experimentally determined values for gamma and sigma(sub c), we find the crystal growth unit to be comprised of 7 +/- 3 molecules. The energy barrier, E(sub c), for the continuous addition of the growth Units is 6.2 +/- 0.3 x 10(exp -13) erg/molecule or 15 +/1 1 k(sub beta)T at 22C.

Gorti, Sridhar↗