Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coefficient of variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Non-destructive measurement and real-time monitoring of apple hardness during ultrasonic contact drying via portable NIR spectroscopy and machine learning

Portable near-infrared spectrometer in the spectral range of 900–1700 nm was evaluated for the first time to assess and monitor apple hardness in real-time during ultrasonic drying. Calibration models were developed using PLS and ANN, and their performances were evaluated by internal leave-one-out cross-validation and an external dataset. Several pre-treatments including standard normal variate (SNV), multiplicative scatter correction (MSC), Savitzky–Golay first and second derivatives were employed to examine the effects of spectral variations in hardness prediction. Seven important wavelengths were selected using weighted regression coefficients to develop a simple MLR model to facilitate the model interpretation and circumvent noise. The models using PLS, MLR, and ANN with selected wavelengths predicted the apple hardness with R 2 p of 0.91, 0.91, 0.95, and RMSEP of 14.78, 14.85, and 12.46 N, respectively. Finally, the results indicate that portable NIR spectrometers are quite promising for real-time monitoring of apple hardness during ultrasonic drying.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Density pedestal prediction model for tokamak plasmas

Abstract A model for the pedestal density prediction based on neutral penetration combined with pedestal transport is presented. The model is tested against a pedestal database of JET-ILW Type I ELMy H-modes showing good agreement over a wide range of parameters both in standalone modelling (using the experimental temperature profile) and in full Europed modelling that predicts both density and temperature pedestals simultaneously. The model is further tested for ASDEX Upgrade and MAST-U Type I ELMy H-modes and both are found to agree with the same model parameters as for JET-ILW. The JET-ILW experiment where the isotope of the main ion is varied in a D/T scan at constant gas rate and constant β N is successfully modelled as long as the separatrix density ( n e,sep ) and pedestal transport coefficient ratio ( D / χ ) are varied in accordance with the experimentally observed variation of n e,sep and the isotope dependence of D / χ found in gyrokinetic simulations. The predictions are found to be sensitive to n e,sep which is why the model is combined with an n e,sep model to predict the pedestal for the STEP fusion reactor.

Physics↗
DOE OSTI2025

Mechanically and electrically tunable Rashba-Edelstein effect in ferroelectric semiconductors, CsGe⁢𝑋 3 (𝑋 = I, Br, Cl)

The ability of materials to convert charge current into spin current is fundamental to many spintronics applications. One means of realizing this conversion is via Rashba-Edelstein effect (REE). Using density functional theory simulations, we predict that REE can be induced in the recently discovered family of semiconducting ferroelectrics, CsGe⁢𝑋 3 (𝑋 = I, Br, Cl). The effect is quantified through Rashba-Edelstein coefficients, 𝜒 𝑥⁢𝑦 =−𝜒 𝑦⁢𝑥 , which are nonzero in valence and conduction bands. The largest values, obtained for CsGeI 3 , are 3.45 × 10 10 $\frac{ℏ}{Λ cm}$ and 0.97 × 10 10 $\frac{ℏ}{Λ cm}$ in the conduction and valence bands, respectively. The values are comparable to, and sometimes exceed, those of other inorganic materials, although the maximal values occur away from the band edges. The coefficients' sign couples to the direction of spontaneous polarization, offering opportunities for nonvolatile spin current manipulation via external electric field. Furthermore, these coefficients are highly tunable through strain engineering owing to strain-induced variations in spin textures and energy isosurfaces. Specifically, 𝜒 in the valence band of CsGeI 3 is enhanced to 3.61 × 10 10 $\frac{ℏ}{Λ cm}$ under 5% biaxial strain. Given this potential, we synthesized CsGeI 3 to validate our simulation structure and found excellent agreement between experiment and simulation, thereby allowing extrapolation of our findings to practically significant temperatures. Furthermore, our study identifies promising materials for nonvolatile, multifunctional spintronic applications.

Electronic structure↗
DOE OSTI2022

Quasielastic least-squares reverse time migration of PS reflections

Conventional analysis of amplitude variation with offset for elastic PS reflections is based on analytical reflection coefficients in a layered medium, and wave-equation-based PS migration is mainly used to produce a structural image. To overcome this problem, we have developed a least-squares reverse time migration (LSRTM) method for elastic PS reflections based on a quasielastic wave equation. Here, the quasielastic wave equation can accurately model PS reflections with elastic amplitudes under the first-order Born approximation. Our LSRTM method inverts for perturbations of the S-wave velocity and density by minimizing the L 2 norm of the difference between recorded and predicted PS reflections modeled using a quasielastic wave equation. We refer to our new method as quasielastic LSRTM of PS reflections. Numerical tests on synthetic and field data indicate that our method can properly handle the amplitudes of elastic PS reflections and provides an accurate estimate of the perturbations of S-wave velocity and density. Extending the method to the 3D case is not straightforward and might require incorporating certain PS data processing techniques into the inversion itself.

58 GEOSCIENCES↗
DOE OSTI2025

Interpretable ensemble learning unveils main aerosol optical properties in predicting cloud condensation nuclei number concentration

Variations in cloud condensation nuclei number concentration (N CCN ) significantly influence cloud microphysics, yet direct N CCN measurements remain challenging. Here, we present an N CCN ensemble learning (NEL) model utilizing ensemble learning and interpretability analysis on aerosol optical parameters. Validated at two land sites, two ocean sites and one polar site within the Atmospheric Radiation Measurement program, the mean absolute percentage error range of the NEL model across different environments is from 12% to 36%, demonstrating high accuracy. Key findings reveal that aerosol optical parameters can serve as predictors for N CCN . Aerosol scattering and backscattering coefficients, absorption coefficient, backscatter fraction (BSF), and Ångström exponent (AE) are positively correlated with N CCN , while single scattering albedo shows negative correlations. N CCN prediction at land sites is highly sensitive to BSF, largely driven by the backscattering coefficient, as fine particles dominate in these sites. At ocean sites, N CCN prediction is more sensitive to AE, primarily influenced by the scattering coefficient, due to the higher proportion of larger particles. At the polar site, N CCN prediction shows sensitivity to both BSF and AE, mainly driven by the scattering coefficient, as polar sites are cleaner and contain larger particles. These differences reflect the variation in particle size and number concentration across different environments.

Atmospheric science↗
DOE OSTI2022

Elevated temperature contact creep and friction of nickel-based superalloys using machine learning assisted finite element analysis

Nickel-based superalloys with superior thermochemical, mechanical, and tribological properties are highly utilized for critical components in several high temperature applications such as gas turbines and nuclear reactors. Inconel 617, in particular, is considered as one of the main candidate superalloys for tribo-components in very-high-temperature gas-cooled nuclear reactors. Recent findings indicate that this alloy grows unique surface oxide especially in a high-temperature helium environment with distinctive wear, friction, and contact properties. Here, this study investigates the high temperature contact area evolution and frictional behavior of Inconel 617 using finite element simulation and provides predictive models for the contact and friction performance at different normal loads, dwell times, and temperatures. High temperature helium-aged Inconel 617 top surface properties (up to 600 °C) are utilized along with a single asperity-based deformable elastic-plastic contact model under combined normal and tangential loading. Machine learning is used to assist the finite element results and to predict friction coefficient as well as contact area evolution. While a small difference is observed in the instantaneous friction coefficient (no dwell time) for all temperatures, friction coefficient increases considerably with dwell time. This shows that the effect of contact creep for longer dwell times significantly dominants the effect of high temperature variation in basic mechanical parameters such as modulus and yield strength. It is found that increasing temperature and dwell times lead to the friction coefficient increase, yet the dominance of dwell time effects decreases at higher temperatures and loads. While the analysis is presented for Inconel 617, the methodology is easy to be generalized and can be applied to other HT alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Extinction of Laser Light Due to Arctic Haze Final Campaign Report

Recent changes in emission patterns may have altered the historical stability of light attenuation strengths within the Arctic and, more specifically, the polar dome. While there have been decades of past and ongoing research on how atmospheric constituents, such as aerosols, affect light absorption, the bulk of this work is focused on the visible region. In recent years, there has been renewed interest in understanding laser light propagation at wavelengths such as 1 and 2 µm in this area. There is a need to evaluate how specific environmental parameters affect the propagation of light in this wavelength region, in particular: the extinction, scattering, and absorption coefficients, and how they relate to particle concentration; cn 2 and refractive index variations. Seasonally dependent variations in particle concentrations and compositions introduce different absorption and scattering characteristics that, in conjunction with varying temperatures, index-of-refraction variations, and wind, can result in laser beam focus and irradiance degradation. Understanding the fundamental influence of these parameters with respect to the propagation of light across a wide spectral band could lead to new insights about the minimal required datastreams required to provide accurate light propagation forecasting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Influence of wind turbine design parameters on linearized physics-based models in OpenFAST

Abstract. While most physics involved in wind energy are nonlinear, linearization of the underlying nonlinear wind system equations is often important for understanding the system response and exploiting well-established methods and tools for analyzing linear systems. Linearized models are important for eigenanalysis (to derive structural natural frequencies, damping ratios, and mode shapes), controls design (based on linear state-space models), etc. In controls co-design, wherein methods often rely on linearized time-domain models of the physics, the physical structure (often called the plant) and controller are designed and optimized concurrently, so it is important to understand how changes to the physical design affect the linearized system. This work summarizes efforts done to understand the impact of design parameter variations in the physical system (e.g., mass, stiffness, geometry, and aerodynamic and hydrodynamic coefficients) on the linearized system using OpenFAST.

17 WIND ENERGY↗
DOE OSTI2024

Aerosol hygroscopicity over the southeast Atlantic Ocean during the biomass burning season – Part 1: From the perspective of scattering enhancement​​​​​​​

Aerosol hygroscopicity plays a vital role in aerosol radiative forcing. One key parameter describing hygroscopicity is the scattering enhancement factor, f(RH), defined as the ratio of the scattering coefficient at humidified relative humidity (RH) to its dry value. Here, we utilize the f(80 %) from ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) 2016 and 2018 airborne measurements to investigate the hygroscopicity of aerosols, its vertical distribution, its relationship with chemical composition, and its sensitivity to organic aerosol (OA) hygroscopicity over the southeast Atlantic (SEA) Ocean during the biomass burning (BB) season. We found that aerosol hygroscopicity remains steady above 2 km, with a mean f(80 %) of 1.40 ± 0.17. Below 2 km, aerosol hygroscopicity increases with decreasing altitude, with a mean f(80 %) of 1.51 ± 0.22, consistent with higher values of BB aerosol hygroscopicity found in the literature. The hygroscopicity parameter of OA (κ OA ) is retrieved from the Mie model with a mean value of 0.11 ± 0.08, which is in the middle to upper range compared to the literature. Higher OA hygroscopicity is related to aerosols that are more aged, oxidized, and present at lower altitudes. The enhanced biomass burning aerosol (BBA) hygroscopicity at lower altitudes is mainly due to a lower OA fraction, increased sulfate fraction, and greater κ OA at lower altitudes. We propose a parameterization that quantifies f(RH) with chemical composition and κOA based on Mie simulation of internally mixed OA–(NH 4 ) 2 SO 4 –BC mixtures. The good agreement between the predictions and the ORACLES measurements implies that the aerosols in the SEA during the BB season can be largely represented by the OA–(NH 4 ) 2 SO 4 –BC internal mixture with respect to the f(RH) prediction. The sensitivity of f(RH) to κ OA indicates that applying a constant κ OA is only suitable when the OA fraction is low and κ OA shows limited variation. However, in situations deviating these two criteria, κ OA can notably impact scattering coefficients and aerosol radiative effect; therefore, accounting for κ OA variability is recommended.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Statistical Uncertainty of Inhalation Dose Coefficients in Consequence Management: Propagated Dose Uncertainty in ICRP 66 Human Respiratory Tract Model

Reference inhalation dose models rely on deterministic biokinetics and reference computational phantoms, limiting their applicability to the variability present in population-specific exposures encountered in emergency response scenarios. Here, this study introduces REDCAL, a Python-based computational framework developed to propagate uncertainty in inhalation dose coefficients using the International Commission on Radiological Protection (ICRP) Publication 66 Human Respiratory Tract Model. REDCAL integrates ICRP deposition and clearance models, systemic biokinetics, and governing physics principles, and leverages Sandia National Laboratories’ Dakota toolkit for uncertainty quantification via Latin Hypercube Sampling. REDCAL was validated against DCAL, with biokinetic retention results differing by less than 1% and effective dose coefficients by less than 2% across all tested radionuclides. Stochastic sampling introduced variability in dose coefficients, with geometric standard deviations (GSD) in committed effective dose coefficients (CEDC) ranging from 1.0 to 1.5, based on lognormal distribution fits. Analysis demonstrated that variations in the activity median aerodynamic diameter (AMAD) notably influenced the computed CEDC values. Smaller particles (<1 µm) increased doses by 20–30% due to deeper lung deposition and prolonged retention for alpha emitting radionuclides, such as 241 Am and 239 Pu. Radionuclides with fast clearance, such as 133 I, demonstrated a dose reduction exceeding 50%, as AMAD increased beyond 5 µm due to upper airway deposition and rapid mucociliary clearance. The greatest GSD among the radionuclides reported in this study was for 241 Am. In most cases, the largest GSDs in the CEDC were associated with larger particle sizes, an expected outcome, as ICRP Publication 66 defines GSD in particle size as a function of AMAD, resulting in an extended tail of the lognormal distribution. The findings support improved inhalation dose assessments and enhance consequence management strategies for the U.S. Federal Radiological Monitoring and Assessment Center by quantifying uncertainty in dose coefficients and strengthening decision-making for emergency response scenarios.

Biokinetic Modeling↗
DOE OSTI2025

A Multivariate Space‐Time Dynamic Model for Characterizing the Atmospheric Impacts Following the Mt. Pinatubo Eruption

The June 1991 Mt. Pinatubo eruption resulted in a massive increase of sulfate aerosols in the atmosphere, absorbing radiation and leading to global changes in surface and stratospheric temperatures. A volcanic eruption of this magnitude serves as a natural analog for stratospheric aerosol injection, a proposed solar radiation modification method to combat a warming climate. The impacts of such an event are multifaceted and region-specific. Our goal is to characterize the multivariate and dynamic nature of the atmospheric impacts following the Mt. Pinatubo eruption. We developed a multivariate space-time dynamic linear model to understand the full extent of the spatially- and temporally-varying impacts. Specifically, spatial variation is modeled using a flexible set of basis functions for which the basis coefficients are allowed to vary in time through a vector autoregressive (VAR) structure. This novel model is cast in a Dynamic Linear Model (DLM) framework and estimated via a customized MCMC approach. We demonstrate how the model quantifies the relationships between key atmospheric parameters prior to and following the Mt. Pinatubo eruption with reanalysis data from MERRA-2 and highlight when such a model is advantageous over univariate models.

Dynamic Linear Model↗
DOE OSTI2021

The CH(X 2 Π) + H 2 O reaction: two transition state kinetics

he reaction of ground state methylidyne (CH) with water vapor (H 2 O) is theoretically re-investigated using high-level coupled cluster computations in combination with semi-classical transition state theory (SCTST) and two-dimensional master equation simulations. Insertion of CH into a H–O bond of H 2 O over a submerged barrier via a well-skipping mechanism yielding solely H and CH 2 O is characterized. The reaction kinetics is effectively determined by the formation of a pre-reaction van der Waals complex (PRC, HC—OH 2 ) and its subsequent isomerization to activated CH 2 OH in competition with PRC re-dissociation. The tunneling effects are found to be minor, while variational effects in the PRC → CH 2 OH step are negligible. The calculated rate coefficient k ( T ) is nearly pressure-independent, but strongly depends on temperature with pronounced down-up behavior: a high value of 2 x 10 -10 cm 3 s -1 at 50 K, followed by a fairly steep decrease down to 8 × 10 -12 cm 3 s -1 at 900 K, but increasing again to 5 × 10 -11 cm 3 s -1 at 3500 K. Over the T-range of this work, k ( T ) can be expressed as: k ( T , P = 0) = 2.31 × 10 -11 ( T /300 K) -1.615 exp(-38.45/ T ) cm 3 s -1 for T = 50-400 K k ( T , P = 0) = 1.15 × 10 -12 ( T /300 K) 0.8637 exp(892.6/ T ) cm 3 s -1 for T = 400-1000 K k ( T , P = 0) = 4.57 × 10 -15 ( T /300 K) 3.375 exp(3477.4/ T ) cm 3 s -1 for T = 1000–3500 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Controlling the breakdown delay time in pulsed gas discharge

Abstract In experiment and 2D3V PIC MCC simulations, the breakdown development in a pulsed discharge in helium is studied for U = 3.2 kV and 10 kV and P = 100 Torr. The breakdown process is found to have a stochastic nature, and the electron avalanche develops in different experimental and simulation runs with time delays ranging from 0.3 to 8 μ s. Nevertheless our experiments demonstrate that the breakdown delay time distribution can be controlled with a change of the pulse discharge frequency. The simulation results show that the breakdown process can be distinguished in three stages with (a) the ionization by seed electrons, (b) the ions drift to the cathode and (c) the enhanced ionization within the cathode sheath by the electrons emitted from the cathode. The effects of variation of seed electron concentrations, voltage rise times, voltage amplitudes and ion–electron emission coefficients on the breakdown development in the pulsed gas discharge are reported.

Schweigert, I. V. (ORCID:0000000223641228)↗
DOE OSTI2025

Growth functions of periodic space tessellations

This work analyzes the rules governing the growth of the numbers of vertices, edges and faces in all possible periodic tessellations of the 2D Euclidean space, and encodes those rules in several types of polynomial growth functions. These encodings map the geometric, combinatorial and topological properties of the tessellations into sets of integer coefficients. Several general statements about these encodings are given with rigorous mathematical proof. The variation of the growth functions is represented graphically and analyzed in orphic diagrams, so named because of their similarity to orphic art. Several examples of 3D space groups are included, to emphasize the complexity of the growth functions in higher dimensions. A freely available Python library is presented to facilitate the discovery of the growth functions and the generation of orphic diagrams.

Chemistry↗
DOE OSTI2020

Theoretical H + O 3 rate coefficients from ring polymer molecular dynamics on an accurate global potential energy surface: assessing experimental uncertainties

Thermal rate coefficients and kinetic isotope effects have been calculated for an important atmospheric reaction H/D + O 3 → OH/OD + O2 based on an accurate permutation invariant polynomial-neural network potential energy surface, using ring polymer molecular dynamics (RPMD), quasi-classical trajectory (QCT) and variational transition-state theory (VTST) with multidimensional tunneling. The RPMD approach yielded results that are generally in better agreement with experimental rate coefficients than the VTST and QCT ones, especially at low temperatures, attributable to its capacity to capture quantum effects such as tunneling and zero-point energy. Additionally, the theoretical results support one group of existing experiments over the other. In addition, rate coefficients for the D + O 3 → OD + O 2 reaction are also reported using the same methods, which will allow a stringent assessment of future experimental measurements, thus helping to reduce the uncertainty in the recommended rate coefficients of this reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Measurement of flow properties coupled to experimental and numerical analyses of dense, granular flows for solar thermal energy storage

Granular flows of sintered bauxite proppants were researched along an inclined plane for solar thermal energy storage applications. Granular flow properties needed to drive numeric granular models were measured for improved numerical model predictions for Carbobead CP 50/140, 40/100, and 30/60 particles. Particle shape and size distributions were determined by coupling optical microscopy to an in-house image processing algorithm. The impulse excitation technique was used to measure elastic and shear moduli, and compute Poisson’s ratio. The coefficient of static sliding friction was measured using the slip-stick method, and the static rolling friction was determined from measured shear on particles positioned between two hot-pressed plates. The coefficient of restitution was measured by dropping particles on a surface and determining the kinetic energy before and after impact with the surface using high resolution particle tracking velocimetry. Particle size did not significantly impact the coefficients of restitution and static rolling friction, however, particle shape distribution resulted in a large variation in measurements. An inclined flow experiment was performed to characterize granular flows of Carbobead CP 30/60 particles using particle image velocimetry. Numerical models of the experiment using discrete element method were generated with the measured mechanical properties as inputs for comparison with experimental results. A constant directional torque rolling friction model best predicted bulk granular flow behavior. Furthermore, good agreement between the model and experiment was achieved at ambient, steady state conditions, with average velocity differences <10%.

14 SOLAR ENERGY↗
DOE OSTI2020

Equation of State of CO 2 Shock Compressed to 1 TPa

Equation-of-state (pressure, density, temperature, internal energy) and reflectivity measurements on shock-compressed CO 2 at and above the insulating-to-conducting transition reveal new insight into the chemistry of simple molecular systems in the warm-dense-matter regime. CO 2 samples were precompressed in diamond-anvil cells to tune the initial densities from 1.35 g/cm 3 (liquid) to 1.74 g/cm 3 (solid) at room temperature and were then shock compressed up to 1 TPa and 93 000 K. Lastly, variation in initial density was leveraged to infer thermodynamic derivatives including specific heat and Gruneisen coefficient, exposing a complex bonded and moderately ionized state at the most extreme conditions studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗