SEARCH · Search NASA
Results for “Community standards”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Virus species names have been standardized; virus names remain unchanged
Virus taxonomy, comprising classification and nomenclature, is regulated by the International Committee on Taxonomy of Viruses (ICTV). Taxon names are standardized to facilitate recognition and communication, with defined suffixes for each rank (e.g., the names of orders, families, and genera end in -virales, -viridae, and -virus, respectively). However, until recently, a standard format for species names was lacking. In 2021, following extensive discussion and community consultation, the ICTV decided to adopt a standardized binomial (Linnaean) format for virus species names, consisting of the genus name followed by a "freeform" species epithet. Previously assigned virus species names that were non-compliant with the binomial format have been fully updated. In contrast to taxon names regulated by the ICTV, the names of viruses, or "common" names, such as yellow fever virus or human immunodeficiency virus, are not under the remit of the ICTV and have not been changed.
What should DOE do to help establish voluntary consensus standards for measuring and rating the performance of PV modules?
In response to concern expressed by the photovoltaics community over progress toward the establishment and issuance of concensus standards on photovoltaic performance measurements, a review of the status of and progress in developing these standards was conducted. It examined the roles of manufacturers, and consumers and the national laboratories funded by the U.S. Department of Energy (DOE) in supporting this effort. This was done by means of a series of discussions with knowledgeable members of the photovoltaic community. Results of these interviews are summarized and a new approach to managing support of standards activity is recommended that responds to specific problems found in the performance measurement standards area. The study concludes that there is a positive role to be played by the U.S. Department of Energy in establishing collector performance measurement standards. It recommends that DOE continue to provide direct financial support for selected committees and for research at national laboratories, and that management of the activity be restructured to increase the authority and responsibility of the consensus committees.
Materials Data Science Ontology(MDS-Onto): Unifying Domain Knowledge in Materials and Applied Data Science
Ontologies have gained popularity in the scientific community as a way to standardize terminologies in organizations’ data. Although certain cohorts have created frameworks with rules and guidelines on creating ontologies, there exist significant variations in how Materials Science ontologies are currently developed. We seek to provide guidance in the form of a unified automated framework for developing interoperable and modular ontologies for Materials Data Science that simplifies the ontology terms matching by establishing a semantic bridge up to the Basic Formal Ontology(BFO). This framework provides key recommendations on how ontologies should be positioned within the semantic web, what knowledge representation language is recommended, and where ontologies should be published online to boost their findability and interoperability. Two fundamental components of the MDS-Onto framework are the bilingual package called FAIRmaterials for ontology creation and FAIRLinked, for FAIR data creation. To showcase the practical capabilities of FAIRmaterials, we present two exemplar domain ontologies of MDS-Onto: Synchrotron X-Ray Diffraction and Photovoltaics.
Rates of Sea‐Level Rise Are Highly Sensitive to Ice Viscosity Parameters in Model Benchmarks
Glacier flow plays a major role in current and future rates of globally averaged sea-level rise. The viscosity of glacial ice, controlling the rate of flow, decreases as stress increases and is highly sensitive to the value of the stress exponent, $n$, in the constitutive equation for viscous flow. Glaciologists and climate modelers almost exclusively assume $n=3$ when modeling ice flow and projecting sea-level rise through forward modeling. However, recent work suggests that $n\approx 4$ better fits observations, prompting the question: How sensitive are projections of sea-level rise to the value of $n$? We use an established community ice flow model and standard benchmark experiments designed as an idealized representation of Pine Island Glacier, West Antarctica. While initializing an $n=3$ model to match observations of an $n=4$ ice sheet is possible, we find that incorrectly assuming $n=3$ when in fact $n=4$ dramatically underestimates rates of sea-level rise. The scale of this error grows nonlinearly with the magnitude of the climate forcing, acting to increase projection uncertainties. Additionally, we find that models often account for this stress-dependent rheology mismatch during model initialization in a way that masks this rheological effect in the short term while leaving model outputs vulnerable to larger biases in longer-term projections. Initializations to observations of Pine Island Glacier display similar rheology-mismatch fingerprints to our idealized example.
A customizable data management framework for high-repetition-rate high-energy-density science
The high-energy-density (HED) physics community is moving toward a new paradigm of high-repetition-rate (HRR) operation. To fully leverage the scientific power of HRR HED facilities, all of the components of each subsystem (laser, targetry, and performance diagnostics) must be connected and synchronized in a reliable and robust manner while the data acquired are tagged and archived in real time. To this end, GA has begun developing a generalized NoSQL-database framework, the MongoDB repository for information and archiving. An organizational strategy has been developed that shifts HED data organization from a shot-based to a diagnostic-based approach in order to increase archival and retrieval efficiency that lends itself to optimization applications. This work is a first step in pushing HRR HED science toward data management solutions that emphasize machine actionability and aim to stimulate community engagement to define data standards in HED science.
Status on NGST Mirror Technology
The NGST primary mirror is anticipated to be a segmented deployable optic with segment size being in the range of 1 - 3 m depending on the details of the architecture. The secondary mirror will likely be a monolith similar in size to one of the primary mirror segments. Over the past 4 years the NGST program has initiated and implemented an aggressive lightweight cryogenic mirror technology program. The program was designed to challenge and excite the optical community in reaching a new standard in production of lightweight optics. The goal was to develop optics at less than 15 kg/sq m, operational at approx. 40 K and meeting the overall NGST observatory requirement for diffraction limited performance at 2 microns. In order to meet the NGST needs, technology efforts were initiated to investigate and develop mirrors in a variety of materials, which held promise for the program. The basic technology approaches have initially targeted the production of large mirrors in the 1.2 - 2.0 m diameter range (or side-to-side distance in the case of hexagonal optics). Although this size may not be the final size of an NGST primary mirror segment, it was felt that a 1.2 - 2.0 m optic would be of sufficient size to understand the mirror material and fabrication processes which drive the cost and schedule of mirror production. The ultimate goals of the technology program are both to demonstrate mirrors meeting, the NGST performance requirements, and to establish cost and schedule credibility for producing and implementing the mirrors for the NGST flight system. Establishing cost and schedule credibility is essential to NGST which is a cost capped mission, with past program experience demonstrating that the optics will be a large portion of the total cost of the program. The first two years of the program were dedicated to understanding; the various applicable materials, funding those materials to various levels of maturity and implementing the first large mirror procurement, the NGST Mirror System Demonstrator (NMSD), in order to establish a benchmark for the state-of-the-art in lightweight optics and to establish credibility that the goals of NGST could be achieved. The past two years of the program has seen major steps in the development of several mirror materials, which not only might have NGST applicability but could also support other programs for other customers. Additionally, a second large mirror procurement, the Advanced Mirror System Demonstrator (AMSD), has been implemented providing a focal point to complete the mirror technology development and lead ultimately to the production of mirrors that will fly on NEXUS (the NGST flight experiment- discussed below) and NGST. This talk will focus on the mirror technology developed over the past 4 years on the NGST program.
Quenching Combustible Dust Mixtures Using Electric Particulate Suspensions (EPS): A New Testing Method For Microgravity
The Electric Particulate Suspension (EPS) is a combustion ignition system being developed at Iowa State University for evaluating quenching effects of powders in microgravity (quenching distance, ignition energy, flammability limits). Because of the high cloud uniformity possible and its simplicity, the EPS method has potential for "benchmark" design of quenching flames that would provide NASA and the scientific community with a new fire standard. Microgravity is expected to increase suspension uniformity even further and extend combustion testing to higher concentrations (rich fuel limit) than is possible at normal gravity. Two new combustion parameters are being investigated with this new method: (1) the particle velocity distribution and (2) particle-oxidant slip velocity. Both walls and (inert) particles can be tested as quenching media. The EPS method supports combustion modeling by providing accurate measurement of flame-quenching distance as a parameter in laminar flame theory as it closely relates to characteristic flame thickness and flame structure. Because of its design simplicity, EPS is suitable for testing on the International Space Station (ISS). Laser scans showing stratification effects at 1-g have been studied for different materials, aluminum, glass, and copper. PTV/PIV and a leak hole sampling rig give particle velocity distribution with particle slip velocity evaluated using LDA. Sample quenching and ignition energy curves are given for aluminum powder. Testing is planned for the KC-135 and NASA s two second drop tower. Only 1-g ground-based data have been reported to date.
Open Rotor Noise Prediction Methods at NASA Langley- A Technology Review
Open rotors are once again under consideration for propulsion of the future airliners because of their high efficiency. The noise generated by these propulsion systems must meet the stringent noise standards of today to reduce community impact. In this paper we review the open rotor noise prediction methods available at NASA Langley. We discuss three codes called ASSPIN (Advanced Subsonic-Supersonic Propeller Induced Noise), FW - Hpds (Ffowcs Williams-Hawkings with penetrable data surface) and the FSC (Fast Scattering Code). The first two codes are in the time domain and the third code is a frequency domain code. The capabilities of these codes and the input data requirements as well as the output data are presented. Plans for further improvements of these codes are discussed. In particular, a method based on equivalent sources is outlined to get rid of spurious signals in the FW - Hpds code.
A Global Model of Meteoric Sodium
A global model of sodium in the mesosphere and lower thermosphere has been developed within the framework of the National Center for Atmospheric Research's Whole Atmosphere Community Climate Model (WACCM). The standard fully interactive WACCM chemistry module has been augmented with a chemistry scheme that includes nine neutral and ionized sodium species. Meteoric ablation provides the source of sodium in the model and is represented as a combination of a meteoroid input function (MIF) and a parameterized ablation model. The MIF provides the seasonally and latitudinally varying meteoric flux which is modeled taking into consideration the astronomical origins of sporadic meteors and considers variations in particle entry angle, velocity, mass, and the differential ablation of the chemical constituents. WACCM simulations show large variations in the sodium constituents over time scales from days to months. Seasonality of sodium constituents is strongly affected by variations in the MIF and transport via the mean meridional wind. In particular, the summer to winter hemisphere flow leads to the highest sodium species concentrations and loss rates occurring over the winter pole. In the Northern Hemisphere, this winter maximum can be dramatically affected by stratospheric sudden warmings. Simulations of the January 2009 major warming event show that it caused a short-term decrease in the sodium column over the polar cap that was followed by a factor of 3 increase in the following weeks. Overall, the modeled distribution of atomic sodium in WACCM agrees well with both ground-based and satellite observations. Given the strong sensitivity of the sodium layer to dynamical motions, reproducing its variability provides a stringent test of global models and should help to constrain key atmospheric variables in this poorly sampled region of the atmosphere.
Representative Agricultural Pathways and Scenarios for Regional Integrated Assessment of Climate Change Impacts, Vulnerability, and Adaptation: Chapter - 5
The global change research community has recognized that new pathway and scenario concepts are needed to implement impact and vulnerability assessment where precise prediction is not possible, and also that these scenarios need to be logically consistent across local, regional, and global scales. For global climate models, representative concentration pathways (RCPs) have been developed that provide a range of time-series of atmospheric greenhouse-gas concentrations into the future. For impact and vulnerability assessment, new socio-economic pathway and scenario concepts have also been developed, with leadership from the Integrated Assessment Modeling Consortium (IAMC).This chapter presents concepts and methods for development of regional representative agricultural pathways (RAOs) and scenarios that can be used for agricultural model intercomparison, improvement, and impact assessment in a manner consistent with the new global pathways and scenarios. The development of agriculture-specific pathways and scenarios is motivated by the need for a protocol-based approach to climate impact, vulnerability, and adaptation assessment. Until now, the various global and regional models used for agricultural-impact assessment have been implemented with individualized scenarios using various data and model structures, often without transparent documentation, public availability, and consistency across disciplines. These practices have reduced the credibility of assessments, and also hampered the advancement of the science through model intercomparison, improvement, and synthesis of model results across studies. The recognition of the need for better coordination among the agricultural modeling community, including the development of standard reference scenarios with adequate agriculture-specific detail led to the creation of the Agricultural Model Intercomparison and Improvement Project (AgMIP) in 2010. The development of RAPs is one of the cross-cutting themes in AgMIP's work plan, and has been the subject of ongoing work by AgMIP since its creation.
Food Quality and Phytoplankton Community Composition in San Francisco Bay using Imaging Spectroscopy Data from the California HyspIRI Airborne Campaign
The San Francisco Bay (SFB) is the largest estuary on the west coast of the United States. It is an important transition zone between marine, freshwater, and inland terrestrial watersheds. The SFB is an important region for the cycling of nutrients and pollutants and it supports nurseries of ecologically and commercially important fisheries, including some threatened species. Phytoplankton community structure influences food web dynamics, and the taxonomy of the phytoplankton may be more important in determining primary food quality than environmental factors. As such, estimating food quality from phytoplankton community composition can be a robust tool to understand trophic transfer of energy. Recent work explores phytoplankton food quality in SFB through the use of microscopy and phytoplankton chemotaxonomy to evaluate how changes in phytoplankton composition may have influenced the recent trophic collapse of pelagic fishes in the northern part of the SFB. The objective of this study is to determine if the approach can also be applied to imaging spectroscopy data in order to quantify phytoplankton food quality from space. Imaging spectroscopy data of SFB from the Airborne VisibleInfrared Imaging Spectrometer (AVIRIS) was collected during the Hyperspectral Infrared (HyspIRI) Airborne Campaign in California (2013 2015) and used in this study. Estimates of ocean chlorophyll and phytoplankton community structure were determined using standard ocean chlorophyll algorithms and the PHYtoplankton Detection with Optics (PHYDOTax) algorithms. These were validated using in situ observations of phytoplankton composition using microscopic cell counts and phytoplankton chemotaxonomy from the US Geological Surveys ship surveys of the SFB. The findings from this study may inform the use of future high spectral resolution satellite sensors with the spatial resolution appropriate for coastal systems (e.g., HyspIRI) to assess food quality from space.
NDE Methods and Capabilities Handbook - Resources for the Composites NDE Community
Composite structures are often difficult to inspect due to the anisotropic nature of the material systems and the range of flaws and defects that can arise in the manufacturing process. NASA’s Advanced Composites Project, a public-private partnership between government, universities and industry, sought to address improved methods, tools, and protocols to reduce the development and certification timeline for composite materials and structures. The rapid inspection of composites was one of the three focused research areas of the project. One deliverable of the project was to develop an NDE Methods and Capabilities Handbook. This Handbook provides a publicly available guidance document that facilitates the selection of appropriate NDE techniques and provides recommended protocols for detecting and characterizing common flaw types in solid laminate carbon fiber reinforced polymer composite (CFRP) structures. The Handbook seeks to reduce the time required to develop qualified inspection processes for composite aircraft structures during the development, certification, and manufacturing phases by providing a reference that helps minimize trial and error and provides guidance on best practices, techniques, and settings, for specific flaw types and geometries. Techniques include, but are not limited to ultrasound, laser based ultrasound, infrared thermography, and x-ray CT. Flaw types include, but are not limited to porosity, delaminations, voids, Automated Fiber Placement (AFP) defects and impact damage. The Handbook contains details such as inspection parameters, data analysis techniques, inspection efficiency and limitations. This presentation will describe key Handbook activities with examples of the techniques and flaw types examined by the Advanced Composite Consortium members. Availability to the NDE community of the fabricated NDE standards as well as the raw data collected on the standards by the Consortium members is discussed.
Autonomous Lunar PNT Simulator (ALPS)
In this paper we present a simulation tool that has been used to develop an architecture for a low-cost Position, Navigation and Time (PNT) system to provide PNT services on and around the Moon using non-dedicated low-cost orbital and ground assets. The simulation tool has been developed to be flexible and is capable of modeling and analyzing the many different capabilities and configurations that the non-dedicated assets could support. The tool models the creation of an ad hoc swarm, the localization of this swarm and the subsequent provision of PNT services from this swarm. We present results from several studies of select configurations chosen to reflect existing and future real-world needs and capabilities. Over the next few decades there is expected to be a substantial increase in Lunar missions supporting and inspired by NASA’s Artemis Program. It is expected that a large fraction of these missions will be low cost, utilizing rideshares and CubeSats, just as has seen in Earth orbit over the past decade. Many of these missions will need navigation capabilities but may be unable to support the large power, mass and weight that a weak GNSS or DSN based navigation solution would entail. As Lunar PNT service demand is not likely to be needed over the entire lunar surface 24/7, the creation of a dedicated Lunar GNSS constellation cannot be justified. Hence, our proposed architecture envisions utilizing existing Lunar science and exploration assets to create ad hoc and on demand Lunar PNT swarms capable of providing PNT services to low cost missions. The simulation reflects the two distinct parts of the architecture: the creation of a Lunar PNT swarm using non-dedicated existing assets, and the quantitative modeling of the quality of the PNT services that this swarm provides. To support the former, the simulation supports various swarm localization techniques, including centralized and distributed EKFs both of which support pluggable dynamics models. In modeling the PNT service performance the simulation adopts standard techniques from the GNSS community, including providing degree of precision (DOP) estimates for theoretical end users. Crucially, all asset capabilities, including clock accuracy, independent location self-knowledge and timing measurement precision can be set independently for each asset, reflecting the key concept of utilizing non-dedicated assets. The simulation is predominantly implemented in MATLAB, with GMAT being used for the propagation of orbital assets. The paper will present results from the simulation reflecting the tool’s flexibility and focusing on scenarios that match real-world proposed missions, including scenarios designed to provide PNT support to lunar surface missions similar to NASA Ames' forthcoming VIPER mission. The performance of centralized and decentralized swarm configuration and localization techniques will be compared. Finally, performance of the PNT service provided by an autonomous Lunar PNT swarm will be compared to existing radiometric and weak GNSS methods.
NDE Methods and Capabilities Handbook - Resources for the Composites NDE Community
Composite structures are often difficult to inspect due to the anisotropic nature of the material systems and the range of flaws and defects that can arise in the manufacturing process. NASA’s Advanced Composites Project, a public-private partnership between government, universities and industry, sought to address improved methods, tools, and protocols to reduce the development and certification timeline for composite materials and structures. The rapid inspection of composites was one of the three focused research areas of the project. One deliverable of the project was to develop an NDE Methods and Capabilities Handbook. This Handbook provides a publicly available guidance document that facilitates the selection of appropriate NDE techniques and provides recommended protocols for detecting and characterizing common flaw types in solid laminate carbon fiber reinforced polymer composite (CFRP) structures. The Handbook seeks to reduce the time required to develop qualified inspection processes for composite aircraft structures during the development, certification, and manufacturing phases by providing a reference that helps minimize trial and error and provides guidance on best practices, techniques, and settings, for specific flaw types and geometries. Techniques include, but are not limited to ultrasound, laser based ultrasound, infrared thermography, and x-ray CT. Flaw types include, but are not limited to porosity, delaminations, voids, Automated Fiber Placement (AFP) defects and impact damage. The Handbook contains details such as inspection parameters, data analysis techniques, inspection efficiency and limitations. This paper describes key Handbook activities with examples of the techniques and flaw types examined by the Advanced Composite Consortium members. Availability to the NDE community of the fabricated NDE standards as well as the raw data collected on the standards by the Consortium members is discussed.
An Overview of the NASA Lift+Cruise eVTOL Crash Test
Introduction – NASA RVLT Project Impact Dynamics / Crash Safety Task - Task Objective: “To improve the crashworthiness and impact safety of Urban Air Mobility (UAM) vehicle and provide data to simplify the certification process. Efforts will include development of validated computational models of these vehicles, as well as other impacting bodies such as birds and drones. Efforts will also focus on developing and evaluating energy absorbing and crush properties of emerging and non-traditional composite materials and processes. Finally, occupant protection will be addressed using computational models and physical assets as it pertains to all rotorcraft environments.” - Problem Statement: “There currently is a lack of data for requirements regarding the crashworthy performance of UAM vehicles and impact loads generated by a bird strike. To address this technology gap, NASA will develop test guidelines, adopt modeling methodologies demonstrating capability for ‘certification by analysis’, acquire vehicle and occupant data on full-scale representative vehicles, and provide data/guidance to consensus standards organizations and the UAM community.” - 4 Main focus points - The investigation of occupant injury using physical and computational assets - The development of energy absorbing technology - The generation of data from sub- and full-scale crash test data - The execution of advanced finite element modelling techniques
Standards and Best Practices - Two NASA Examples
Formal international standards as well as promotion of community or recommended practices have their place in ensuring "FAIRness" of data. Data management in NASA's Earth Observation System Data and Information System (EOSDIS) has benefited from both of these avenues to a significant extent. The purpose of this paper is to present one example of each of these, which promote (re)usability. The first is an ISO standard for specifying preservation content from Earth observation missions. The work on this started in 2011, informally within the Earth Science Information Partners (ESIP) in the US, while the European Space Agency (ESA) was leading an effort on Long-Term Data Preservation (LTDP). Resulting from the ESIP discussions was NASA's Preservation Content Specification, which was applied in 2012 as a requirement for NASA's new missions. ESA's Preserved Data Set Content (PDSC) document was codified into a document adopted by the Committee on Earth Observation Satellites (CEOS). It was recognized that it would be useful to combine PCS and PDSC into an ISO standard to ensure consistency in data preservation on a broader international scale. This standard, numbered ISO 19165-2 has been under development since mid-2017. The second is an example of developing recommendations for "best practices" within more limited (still fairly broad) communities. A Data Product Developers' Guide (DPDG) is currently being developed by one of NASA's Earth Science Data System Working Groups (ESDSWGs). It is for use by developers of products to be derived from Earth observation data to improve product (re)usability. One of the challenges in developing the guide is the fact that there are already many applicable standards and guides. The relevant information needs to be selected and expressed in a succinct manner, with appropriate pointers to references. The DPDG aims to compile the most applicable parts of earlier guides into a single document outlining the typical development process for Earth Science data products. Standards and best practices formally endorsed by the Earth Science Data and Information System (ESDIS) Standards Office (ESO), outputs from ESDSWGs (e.g., Dataset Interoperability Working Group, and Data Quality Working Group), and recommendations from Distributed Active Archive Centers and data producers are emphasized.
Technologies and Methods Used at the Laboratory for Atmospheric and Space Physics (LASP) to Serve Solar Irradiance Data
The Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado in Boulder, USA operates the Solar Radiation and Climate Experiment (SORCE) NASA mission, as well as several other NASA spacecraft and instruments. Dozens of Solar Irradiance data sets are produced, managed, and disseminated to the science community. Data are made freely available to the scientific immediately after they are produced using a variety of data access interfaces, including the LASP Interactive Solar Irradiance Datacenter (LISIRD), which provides centralized access to a variety of solar irradiance data sets using both interactive and scriptable/programmatic methods. This poster highlights the key technological elements used for the NASA SORCE mission ground system to produce, manage, and disseminate data to the scientific community and facilitate long-term data stewardship. The poster presentation will convey designs, technological elements, practices and procedures, and software management processes used for SORCE and their relationship to data quality and data management standards, interoperability, NASA data policy, and community expectations.