Search NASA⌕ Search

SEARCH · Search NASA

Results for “Composition B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Structures and magnetic properties of Co-Zr-B magnets studied by first-principles calculations

The structures and magnetic properties of Co-Zr-B alloys near the composition of Co{sub 5}Zr with B at. % ≤6% were studied using adaptive genetic algorithm and first-principles calculations. The energy and magnetic moment contour maps as a function of chemical composition were constructed for the Co-Zr-B magnet alloys through extensive structure searches and calculations. We found that Co-Zr-B system exhibits the same structure motif as the “Co{sub 11}Zr{sub 2}” polymorphs, and such motif plays a key role in achieving strong magnetic anisotropy. Boron atoms were found to be able to substitute cobalt atoms or occupy the “interruption” sites. First-principles calculations showed that the magnetocrystalline anisotropy energies of the boron-doped alloys are close to that of the high-temperature rhombohedral Co{sub 5}Zr phase and larger than that of the low-temperature Co{sub 5.25}Zr phase. Our calculations provide useful guidelines for further experimental optimization of the magnetic performances of these alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experiment and simulation of the compositional evolution of Ti-B thin films deposited by sputtering of a compound target

The evolution of the coating stoichiometry with pressure, target-substrate distance, and angle was analyzed for dc sputtering of Ti{sub x}B (x=0.5, 1, 1.6) compound targets by elastic recoil detection analysis. For an investigation of the underlying fundamental processes primarily Ar was used as sputter gas. Additionally, the effect of a reactive gas (N{sub 2}) as well as bias voltage (floating up to -200 V) was briefly cross-checked. For deposition along the target normal (90 deg.) a pronounced Ti-deficiency of up to 20% is detected. Increasing the pressure or distance from 0.5 to 2 Pa and from 5 to 20 cm, respectively, leads to an almost equivalent linear increase in Ti/B ratio surpassing even the target composition. Off-axis depositions at lower angles (30 deg. and 60 deg.) on the other hand result in a higher Ti/B ratio. This is consistent with results obtained from Monte Carlo simulations combining the respective emission characteristics from the sputter process as well as the gas-phase transport. Hence, the pressure, distance, and sample position induced changes in chemical film composition can be understood by considering gas scattering and the angular distribution of the sputtered flux. The theoretically determined transition from a directional flux to thermal diffusion was experimentally verified by mass-energy analysis of the film-forming atoms.

36 MATERIALS SCIENCE↗

Modulating upconversion luminescence through fluorescent dyes

In our work, we report an effective method to tune the upconversion emission of NaGdF{sub 4}:Yb{sup 3+},Er{sup 3+}@NaYF{sub 4} core/shell nanoparticles. The shell thickness-dependent upconversion luminescence of NaGdF{sub 4}:Yb{sup 3+},Er{sup 3+}@NaYF{sub 4} core/shell and the dye Rhodamine-B(RhB) composite were discussed in detail. It is found that the fluorescent dye RhB can remarkably improve the violet emission of the upconversion nanoparticles (UCNPs) and simultaneously generating the 605 nm yellow emission through energy transfer. Importantly, it is revealed that the effective energy transfer distance between upconversion nanoparticles and RhB is shorter than 18 nm in the media of NaYF{sub 4}. These results open a novel way for determining the energy transfer distance between the upconversion nanoparticles and the dyes and simultaneously tuning the emission brightness and the spectrum covering range of the upconversion nanoparticles for meeting the requirement in the application fields of light source, colorful display, biological imaging, and fluorescent probes. - Graphical abstract: TEM images of core/shell upconversion nanoparticles and the illustration of Energy transfer distance UCNPs and Rhodamine-B molecular. Display Omitted - Highlights: • The upconversion nanoparticles with controlled surface morphology and shell thickness were prepared by thermal decomposition method. The emission brightness and the spectrum covering range of the upconversion nanoparticles can be tuned. • The fluorescent dye RhB can remarkably improve the violet emission of the upconversion nanoparticles and simultaneously generating the 605 nm yellow emission through energy transfer. • It is the first reported that the effective energy transfer distance between upconversion nanoparticles and RhB is shorter than 18 nm in the media of NaYF{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, strain, and composition profiling of InAs/GaAs(211)B quantum dot superlattices

The morphology, nanostructure, and strain properties of InAs quantum dots (QDs) grown on GaAs(211)B, uncapped or buried, are explored by transmission electron microscopy and related quantitative techniques. Besides the built-in piezoelectric field, other differences of (211) growth compared to (100)-oriented growth are discussed in terms of the (211) surface non-singularity, leading to anisotropic shape of the QDs and local chemical inhomogeneity of the wetting layer. The shape of the uncapped QDs was precisely defined as truncated pyramidal, elongated along the 〈111〉 direction, and bounded by the (110), (100), and (213) facets. Local strain measurements showed that large surface QDs were almost unstrained due to plastic relaxation, exhibiting small residual elastic strain at the interface that gradually diminished toward their apex. Conversely, buried QDs were pseudomorphically grown on GaAs. By postulating a plane stress state, we have established a systematic increase of the local strain from the base toward the apex region of the QDs. Using Vegard's law, their chemical composition profiles were calculated, revealing an indium content gradient along the growth direction and compositional variants among different QDs. Photoluminescence measurements showed variations in emission energy between the QDs and consistency with a graded In-content, which complied with the quantitative strain analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Carbon Nanotube Concentration on the Corrosion Behavior of Electroless Ni-B-CNT Coating

In this study, Ni-B-CNT composite was deposited on AISI 4140 steel using different concentrations of CNTs ranging from 0.2 to 1 gr/lit in an electroless bath. The phase analysis and surface morphology of the samples were characterized using x-ray diffraction and FESEM. The corrosion behavior of the coated samples was investigated in a 3.5 wt.% NaCl solution through potentiodynamic polarization, EIS, and electrochemical noise (EN) analyses. The corroded surface of the samples was further analyzed via FESEM observation after 10 days of immersion in corrosive medium. It was found that although adding 0.2 gr/lit CNT in electroless solution improves corrosion resistance, increasing CNT concentration from 0.2 up to 1 gr/lit increases the corrosion rate. The FESEM observations and EN results imply that the formation of micro-galvanic cells in samples with high concentration of CNTs leads to nucleation and growth of the pits. The results revealed that no passive layer was formed on the surface of the Ni-B sample, and the corrosion occurred through ionic diffusion into the cracks and crevices. The results of potentiodynamic test show that adding CNTs into electroless bath facilitates the formation of passive layer. However, results of EN test imply that increasing CNT concentration causes repetitive breakdown and recovery of passive film.

36 MATERIALS SCIENCE↗

SNL API-653 In-Service Tank Inspection and Evaluation Tank ID: 981-A2-T0 (West)

An API Standard 653 In-Service inspection was completed on Tank 981-A2-T0 (West) located at the Sandia National Laboratories TAIV tank farm in Albuquerque, NM on September 22, 2015. The inspection was completed to collect data to evaluate the mechanical integrity and fitness for continued service of the tank. No indication or records of any previous inspection were identified for this tank. The inspection and engineering evaluation were completed using API-653, 5 th Edition and conservative engineering practices. The tank was not removed from service, so an internal inspection could not be completed. The tank was also fully insulated. The insulation was removed in specified areas of the tank shell and tank chime to accommodate an acoustic emission scan of the tank and an ultrasonic thickness evaluation of portions of the tank. The acoustic emission scan resulted in a grade of B / I - II indicating an overall TANKPAC grade B and composite grade II indicating minor active damage with highly concentrated sources related to corrosion found in the southeast and west side section of the tank. Eight Potential Localized Damage sources were found mainly in the west side (re-test in 2 years). The tank chime could not be inspected due to the configuration of the insulation welded angle support. An ultrasonic guided bulk wave inspection was completed on the tank shell to assess the lower shell section. At the time of the inspection the limited data collected showed minimal material loss from the shell at the thickness monitoring locations, however, visual inspection and pit depth gauge measurements showed > 3/16” inch pitting and significant general external surface corrosion on the shell at the shell to floor joint. This corrosion is caused by the insulation sheeting support welded angle iron trapping moisture and dirt against the tank shell. This tank should be removed from service, internally inspected, and repaired. Ultrasonic thickness measurement locations were established on this tank and the data is included in this report. The limited data collected indicated minimal material loss at these locations, with the only noted corrosion occurring on the tank shell to floor joint as noted above. An API-653 Annex B Evaluation of Tank Bottom Settlement was completed and the results are included in this report. No significant settlement issues were identified.

42 ENGINEERING↗

Vadose Zone Model for B-3A/B Pond for Composite Analysis

The objectives of the vadose modeling for the updated Hanford Site composite analysis (CA) are to simulate the flow and transport of water and radionuclide releases from the surface to the water table and to provide radionuclide transfer rates for the plateau to river (P2R) model, version 8.3 (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). Water additions include natural recharge and water discharged to the ground as a result of industrial processes associated with Hanford Site operations. Contaminant sources include radionuclides in water discharged to the ground during operations and radionuclides disposed “dry” in solid waste burial grounds or other means. The following 16 radionuclides were selected for this modeling effort; carbon-14 (C-14), chlorine-36 (Cl-36), tritium (H-3), iodine-129 (I-129), neptunium-237 (Np-237), rhenium-187 (Re-187), strontium-90 (Sr-90), technetium-99 (Tc-99), uranium-232 (U-232), uranium-233 (U-233), uranium-234 (U-234), uranium-235 (U-235), uranium-236 (U-236), uranium-238 (U-238), radium-226 (Ra-226), and thorium-230 (Th-230). The simulation time starts in 1943 and ends at 12070, which is 10,000 years after assumed Hanford Site closure in 2070. The parallel version of the Subsurface Transport Over Multiple Phases (STOMP) simulator officially named the exascale Subsurface Transport Over Multiple Phases (eSTOMP), is used to simulate flow and transport for the vadose models. The documentation for the STOMP code is comprehensive. The theoretical and numerical approaches applied in the STOMP code are documented in a published theory guide (PNNL-12030, STOMP Subsurface Transport Over Multiple Phases Version 2.0 Theory Guide). The code has undergone a rigorous verification procedure against analytical solutions, laboratory-scale experiments, and field-scale demonstrations. The application guide (PNNL-11216, STOMP Subsurface Transport Over Multiple Phases Application Guide) provides instructive examples in the application of the code to classical groundwater problems. The user’s guide (PNNL-15782, STOMP: Subsurface Transport Over Multiple Phases Version 4.0: User’s Guide) describes the general use, input file formatting, compilation, and execution of the code. The primary output of the vadose zone modeling is radionuclide transfer rates to the groundwater for input into the P2R model. The rates will be summed over the 100 by 100 m P2R grid cells that fall within the vadose zone model source domain. The Hanford Site Central Plateau was subdivided into 26 individual vadose zone models, with 13 in the 200 East Area and 13 in the 200 West Area. Waste sites that have a completed performance assessment (PA) or past-leak analysis were not included as sources of radionuclides. Instead the vadose zone to groundwater transfer rates of the Environmental Restoration Disposal Facility, Integrated Disposal Facility, US Ecology, and Waste Management Area C (WMA C) PAs and the past-leak analysis for WMA C were used as direct input to the P2R model. Each of the vadose zone models is documented in separate environmental calculation files (ECFs). This ECF describes the B-3A/B Ponds model. The scope of this ECF is to document the development and results of the B-3 A/B Ponds vadose zone model. CP-63515, Model Package Report: Central Plateau Vadose Zone Models, describes the approach, assumptions, process of determining the number of models required and domain of each model, input data, and processing common to all the models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Current technologies for analysis of biomass thermochemical processing: A review

Pyrolysis and gasification are two of the more promising utilization methods for the conversion of biomass toward a clean fuel source. To truly understand and model these processes requires detailed knowledge ranging from structural information of raw biomass, elemental composition, gas-phase reaction kinetics and mechanisms, and product distributions (both desired and undesired). The various analytical methods of biomass pyrolysis/gasification processing are discussed, including reactor types, analytical tools, and recent examples in the areas of (a) compositional analysis, (b) structural analysis, (c) reaction mechanisms, and (d) kinetic studies on biomass thermochemical processing.

09 BIOMASS FUELS↗

Corrosion of Al 2 O 3 /Cr and Ti 2 O 3 /Cr composites in flowing air and CO 2 at 750°C

Hot-pressed Al 2 O 3 /Cr and Ti 2 O 3 /Cr composites were exposed to synthetic air or CO 2 at 750 °C. The Al 2 O 3 /Cr composites formed external Cr 2 O 3 scales, and exhibited slow parabolic oxidation kinetics, in both gases. The Cr 2 O 3 scales formed in CO 2 possessed finer grains, and thickened at a faster rate, than Cr 2 O 3 scales formed in air. The Ti 2 O 3 /Cr composites formed thick external TiO 2 scales with internal oxidation zones that also contained Cr 2 O 3 scales on subsurface Cr grains. After 20 h at 750 °C, the Ti 2 O 3 /Cr composites exhibited parabolic oxidation kinetics in both gases, although the oxidation rates were significantly higher than for the Al 2 O 3 /Cr composites.

36 MATERIALS SCIENCE↗

Monodispersed boron carbonitride hollow spheres with high-performance microwave absorption property

Highlights: • Boron carbonitride hollow spheres were synthesized by a simple precursor. • A novel precursor was synthesized to prepare the hollow spheres. • The products exhibit excellent microwave absorption performance. - Abstract: A novel method, combining polymerization and pyrolysis of single precursor on graphite sheet, has been developed to synthesize monodispersed boron carbonitride hollow spheres in large-scale. The products have hollow architectures (2–3 μm in diameter) with nano-pores on the spherical walls and a composition of B{sub 0.23}N{sub 0.19}C{sub 0.58.} The products exhibit the minimum reflection loss of −42.5 dB at 12.6 GHz (the effective reflection values are obtained in a very wide range of 3.4–17.3 GHz) suggesting a new and high quality microwave absorbent.

36 MATERIALS SCIENCE↗

Flexible 2D Boron Imidazolate Framework for Polysulfide Adsorption in Lithium–Sulfur Batteries

We report the "polysulfide shuttle," a process initiated by the dissolution of polysulfides, is recognized to be one of the major failure mechanisms of lithium-sulfur (Li-S) batteries. Much research effort has been dedicated toward efficient cathode additives and host materials to suppress the leaching of polysulfide species. Herein, we report a new 2D metal-organic framework constituted by a tritopic ligand, boron imidazolate ([BH(Im) 3 ] - , Im = imidazole), and Co 2+ ions for lithium polysulfide adsorption. The cobalt imidazolate framework (CoN 6 -BIF) contains octahedrally coordinated Co centers that form two-dimensional layers in the a,b plane. Composite cathodes containing CoN 6 -BIF exhibited high sulfur utilization and capacity retention, resulting in improved specific capacity and cycle life compared to sulfur/carbon controls. Density functional theory (DFT) calculations suggest that CoN 6 -BIF linkers are rotationally flexible, allowing the framework to accommodate polysulfide in the expanded pores. This unusual property of BIFs opens up new avenues for exploring flexible metal-organic frameworks (MOFs) and their applications to energy storage.

25 ENERGY STORAGE↗

Transition-Metal Strings Templated on Boron-Doped Carbon Nanotubes: A DFT Investigation

The binding nature, magnetic, and electronic properties of transition-metal (TM) monatomic chains anchored on boron-doped single-walled carbon nanotubes (B-SWCNTs) are studied using density-functional theory. The TM systems studied here include Au, Pt, Ru, Pd, Ag, Co, Ni, Cu, W, and Ti, which are well-known for their technical importance. In conjunction, prototype semiconducting SWCNT(8,0) and metallic SWCNT(6,6) were chosen to model the general features of B-doped SWCNTs. It is found that the TM-strings exhibit well-defined covalent bonds with the boron-doped SWCNTs, in contrast to the pristine SWCNTs. The TMstring/ B-SWCNT composites exhibit high stability and unexpected electronic properties, which are relevant to applications in nanoelectronics, spintronics, nanocatalysis, and sensor devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Trinity High Explosive Implosion System: The Foundation for Precision Explosive Applications

This article is set during the 1944 and 1945 final push to complete Project Y—the Manhattan Project at Los Alamos—and focuses primarily on overcoming the challenge of creating and demonstrating a successful convergent explosive implosion to turn a subcritical quantity of plutonium into a critical mass. The critical mass would then efficiently yield kilotons of trinitrotoluene (TNT)-equivalent energy in about a microsecond, demonstrating the implosion atomic bomb concept. This work culminated in the Trinity atomic test near Alamogordo on July 16, 1945. This implosion effect demarcated the approach to explosive science and technology the Laboratory has followed ever since, including development of high-explosive synthesis and formulation, small and large test and diagnostic facilities, shock dynamics theory, high-explosive system design engineering, and three-dimensional implosion modeling and simulation using some of the fastest computers in the world. This work also ushered in a period of broader application of precision high explosives in conventional munitions, demolition, mining and oil exploration, and space travel.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Radically Engineered Modular Air Separation System with Tailored Oxygen Sorbents

The commercial energy sector relies heavily on fossil fuel conversion, and in the process releases a significant amount of CO 2 . A promising technology to utilize fossil fuels with relatively affordable CO 2 capture is gasification. However, it requires a pure oxygen stream. The current state of the art method to produce oxygen is cryogenic air separation, which supercools air to a liquid, and then using distillation columns to separate the components. While this method has been thoroughly studied, it only has a 25% efficiency from a second law standpoint and therefore requires a significant amount of energy (and associated emissions) for oxygen production. This, then, lowers the incentive for carbon capture within a plant, so alternative methods need to be investigated. One potential method, chemical looping air separation (CLAS), is a promising method to replace state of the art oxygen generation technologies. CLAS utilizes a cyclic redox scheme with an oxygen sorbent to create pure oxygen streams. This approach typically utilizes a dual reactor scheme where the oxygen deficient sorbent enters the first reactor and is subjected to high oxygen partial pressures to re-oxidize the sorbent. Then the sorbent is sent to the reducing reactor, where it is subjected to low oxygen partial pressure (steam or vacuum) to releases oxygen. The overarching objective of this project was to discover the principles for rational design and optimization of oxygen sorbents and process design to ensure the process is a viable replacement for cryogenic air separation, especially in the context of modular gasification systems. This was done through development, characterization, testing, and analyses of (a) high temperature mixed composite oxides; (b) low temperature doped perovskite oxides (A1 x A2 1-x B1 y B2 1-y O 3 ); (c) scale up synthesis and testing of the optimized sorbent particles; (d) process design and analyses of the CLAS system in the context of modular gasification applications.

01 COAL, LIGNITE, AND PEAT↗

Enhanced HLW glass property-composition models - phase 3

During the present phase (Phase 3) of work to enhance and expand the HLW glass property-composition models, test data for 137 glasses were collected and incorporated into the combined WTP/ORP database. The new data include those collected on glasses from two statistically designed matrices to augment the moderate alumina region (the HLW16-MA matrix covering the region of 9 wt% < Al2O3 < 12 wt% with 16 glasses) and the ultra-high alumina region (the HLW16-UHA matrix covering the region of 26 wt% < Al2O3 < 29 wt% with 29 glasses). The addition of ORP glasses over the different phases of testing has significantly expanded the combined WTP/ORP database. The compiled data include glass compositions, PCT (B, Li and Na) releases, spinel T1%, electrical conductivity, viscosity, TCLP-Cd releases, and nepheline formation upon CCC. With the exception of the CCC spinel formation data – the CCC data will be used to support the further development of nepheline models for Hanford HLW glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fundamental Mechanisms of Tensile Fracture in Aluminum Sheet Unidirectionally Reinforced with Boron Filament

Results are presented from an experimental research effort to gain a more complete understanding of the physics of tensile fracture in unidirectionally reinforced B-Al composite sheet. By varying the degree of filament degradation resulting from fabrication, composite specimens were produced which failed in tension by the cumulative mode, the noncumulative mode, or by any desired combination of the two modes. Radiographic and acoustic emission techniques were combined to identify and physically describe a previously unrecognized fundamental fracture mechanism which was responsible for the noncumulative mode. The tensile strength of the composite was found to be severely limited by the noncumulative mechanism which involved the initiation and sustenance of a chain reaction of filament fractures at a relatively low stress level followed by ductile fracture of the matrix. The minimum average filament stress required for initiation of the fracture mechanism was shown to be approximately 170 ksi, and appeared to be independent of filament diameter, number of filament layers, and the identity of the matrix alloy.

Herring, H. W.↗