Search NASA⌕ Search

SEARCH · Search NASA

Results for “Configurations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Frustrated electron hopping from the orbital configuration in a two-dimensional lattice

Electron hopping on spatially periodic lattices gives rise to intriguing electronic behaviour. For example, hopping on the geometrically frustrated two-dimensional kagome, dice and Lieb lattices yields electronic band structures with both massless Dirac-like and perfectly dispersion-less, flat bands. As materials featuring the dice and Lieb lattice structures are scarce, an alternative approach proposes to leverage atomic orbitals to realize the characteristic electron hopping of geometrically frustrated lattices. This strategy promises to expand the list of candidate materials with frustrated electron hopping, but is yet to be shown in experiments. Here, in this study, we demonstrate frustrated hopping in the van der Waals intermetallic Pd 5 AlI 2 , emerging from the arrangement of atomic orbitals in a primitive square lattice. Using angle-resolved photoemission spectroscopy and quantum oscillation measurements, we reveal that the band structure of Pd 5 AlI 2 includes linear Dirac-like bands intersected at their crossing point by a locally flat band—an essential characteristic of frustrated hopping in Lieb and dice lattices. Moreover, this compound shows exceptional chemical stability, with its unusual bulk band structure and metallicity persisting in ambient conditions down to the monolayer limit. Hence, our results showcase a way to realize electronic structures characteristic of geometrically frustrated lattices in non-frustrated systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evaluating CO 2 -to-formic acid electrocatalysts in different device configurations

We evaluated CO 2 electroreduction differences of three materials in aqueous H-cell, gas diffusion electrode (GDE) half-cell, and full-cell electrolyzer devices. Mass-transport limited catalyst differences in H-cells become more apparent in gas-fed GDE half-cells; however, voltage contributions from device components can mask cathode differences in full-cell devices until high current density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Shock-driven three-fluid mixing with various chevron interface configurations

When a shock wave crosses a density interface, the Richtmyer–Meshkov instability causes perturbations to grow. Richtmyer–Meshkov instabilities arise from the deposition of vorticity from the misaligned density and pressure gradients at the shock front. In many engineering applications, microscopic surface roughness will grow into multi-mode perturbations, inducing mixing between the fluid on either side of an initial interface. Applications often have multiple interfaces, some of which are close enough to interact in the later stages of instability growth. In this study, we numerically investigate the mixing of a three-layer system with periodic zigzag (or chevron) interfaces, calculating the dependence of the width and mass of mixed material on properties such as the shock timing, chevron amplitude, multi-mode perturbation spectrum, density ratio, and shock mach number. The multi-mode case is also compared with a single-mode perturbation. The Flash hydrodynamic code is used to solve the Euler equations in three dimensions with adaptive grid refinement. Key results include a significant increase in mixed mass when changing from a single-mode to a multi-mode perturbation on one of the interfaces. The mixed width is mainly sensitive to the density ratio and chevron amplitude, whereas the mixed mass also depends on the multi-mode spectrum. In conclusion, steeper initial perturbation spectra have lower mixed mass at early times but a greater mixed mass after the reflected shock transits back across the layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Experimental study of high-energy single-pulse nanosecond discharges in pin-to-pin configuration

Single-pulse pin-to-pin nanosecond pulsed discharges in ambient air (gap distances of 3–7 mm) were investigated at high pulse energies (∼20–30 mJ deposited energy per 11 ns full width at half maximum pulse). A Michelson interferometry setup (532 nm continuous-wave laser) was employed to record time-resolved interferograms of the discharge, enabling spatially resolved calculation of the electron number density. An intensified charge-coupled device camera was used to capture the spatiotemporal evolution of the discharge (streamer formation and spark channel development), and Coherent Anti-Stokes Raman Spectroscopy (CARS) was used to measure post-discharge N 2 vibrational temperatures. Discharge current and voltage were monitored with a back-current shunt. The discharge was initiated with simultaneous cathode-directed and anode-directed streamers that bridge the gap within ∼1 ns and form a luminous, filamentary plasma channel immediately after breakdown. Laser interferometry measurements showed peak electron number densities of the order of 10 1 7–10 18 cm −3 , occurring about 15–20 ns after pulse arrival at the discharge gap. Shorter gap discharges yielded higher peak electron densities, consistent with the higher energy density in the smaller gaps. Spatially, the electron density was highest near the electrodes and decreased toward the midgap region, with 5 and 7 mm gaps exhibiting a pronounced drop in the central channel. CARS indicated initial vibrational temperatures of approximately 4000–6000 K in the spark core of ∼50 ns after the discharge onset, decaying on a ∼500 ns timescale as the plasma cooled and recombined.

Coherent anti-Stokes Raman spectroscopy↗
DOE OSTI2026

Mathematical Models and Numerical Methods for High-Fidelity Simulation of Ignition of Reactive Mixtures by Nanosecond Plasma Discharges in Realistic Configurations

We present a newly developed framework for the numerical simulation of ignition of reactive mixtures using single or repeated nanosecond discharge pulses. The framework builds upon the AMReX library, using the existing compressible solver PeleC and low-Mach solver PeleLMeX and allowing for adaptive mesh refinement, complex geometries, and execution on next-generation high-performance computing (HPC) systems. High-fidelity elementary models are adopted for weakly-ionised plasma discharges with significant energy deposition, consistent with nanosecond discharge pulses, and then implemented in the solver. The treatment of non-thermal electrons and charged species, thermodynamics of non-equilbrium species, plasma kinetics, limiting time scales, and boundary conditions for charged species are discussed and addressed for computational efficiency. The framework is demonstrated for three relevant applications: single and multi-pulse discharges in air, single pulse ignition of an ethylene/air mixture, and a three-dimensional plasma discharge in air with temperature stratification. The successful application of the framework demonstrates the feasibility of high-fidelity simulation of ignition of air/hydrocarbon mixtures in three-dimensions with multiple discharge pulses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Next-generation tunnel FETs: exploring material perspectives and areal tunneling configurations

The end of Dennard scaling, which facilitated proportional increases in computing power without added energy costs until the mid-2000s, has underscored the urgent need for innovative semiconductor devices that can enhance energy efficiency. Tunnel field-effect transistors (TFETs) have emerged as promising candidates to surpass the energy efficiency of conventional metal oxide semiconductor field-effect transistors (MOSFETs). Unlike MOSFETs, which rely on thermionic emission to overcome the source-channel potential barrier, TFETs operate through quantum tunneling, potentially enabling sub-60 mV dec −1 subthreshold swing (SS) for low-voltage operation. However, lateral TFETs have faced challenges in achieving adequate on-state current (I ON ) and a broad SS operation window, limiting their practical utility. This review article advocates for areal TFETs, which utilize face-to-face tunnel junctions that ideally offer step-function current turn-on characteristics and allow I ON to scale with device area rather than width. We highlight recent advancements in integrating 2D materials into tunneling structures, which could facilitate efficient band-to-band tunneling through atomically thin layers, while addressing challenges of gate field screening. We then discuss the nearer-term prospects of epitaxial areal TFETs comprising III–V compound semiconductors and group-IV semiconductors based on recent experimental progress. The review examines both quantum mechanical and semiclassical modeling approaches for TFETs, including techniques to reduce the computational complexity. The article delves into ongoing challenges in material synthesis, interface engineering, device fabrication, and integration pathways, concluding with recommendations for future research directions to overcome the fundamental power density limitations of conventional transistor technology.

2D materials↗
DOE OSTI2025

Voltage-Current Behavior of a Superconducting STAR ® Wire in a 6-Around-1 Cable Configuration

A 6-around-1 transposed cable using superconducting STAR® wires can be useful for future circular collider applications. We made three cable samples using single STAR® wires with a diameter of 1.3 mm. The first two samples, made with a cabling machine, used STAR® wires consisting of a 0.7 mm diameter Nb-Ti core. The third cable sample was manually wound and used a STAR® wire made with a 0.81 mm diameter Cu core. The first sample showed severe degradation after the cable was bent to a 75 mm radius. The current-carrying capability of the innermost and outermost REBCO tapes in the STAR® wire degraded by 42% to 98% and the middle REBCO tapes remained intact. This was also the case for the second and straight cable sample. After fabrication of the third cable sample, we observed only about 5% reduction in the current along the wire, measured at different locations inside the terminations. Finally, the results indicate that the differences in architecture or fabrication of the STAR® wires could have caused differences in critical current retention after cabling.

6-around-1 cable↗
DOE OSTI2024

Cookie-Jar: An Adaptive Re-configurable Framework for Wireless Network Infrastructures

5G advancements like Massive Multiple Input Multiple Output (MIMO) bring high capacity and low latency, but also intensify interference challenges. Static and dynamic coordination techniques address this, often at the cost of increased power draw. We introduce Cookie-Jar (CJ), an interference coordination (IC) framework using reinforcement learning for multi-goal optimization. By dynamically adjusting network, power, and topology parameters based on real-time conditions, CJ improves Signal to Noise and Interference Ratio (SINR) while minimizing power consumption. Simulated 5G experiments showcase CJ's potential, achieving a 15% SINR improvement with near-identical power draw compared to existing methods.

Network↗
DOE OSTI2025

Two-photon Rydberg EIT resonances in non-collinear beam configurations

We study the modifications of Rydberg EIT resonances in non-collinear geometry in which the two required optical fields cross at a small non-zero angle. We observe a strong broadening and amplitude reduction even for small angles when compared to exact counter-propagating and co-propagating collinear geometries. We confirm that such EIT peak deterioration results from the additional Doppler broadening due to the transverse velocity distribution of atoms. The numerical simulation closely matches the experimental measurements. While a non-collinear geometry provides improved spatial resolution for Rydberg EIT electrometry, we conclude that the crossing angle must be small to maintain field sensitivity.

Su, Kevin↗
DOE OSTI2025

Distinctive molecular configuration of nanostructured silica deposited at a glancing angle

Glancing-angle deposition (GLAD) produces nanostructured silica, showcasing form birefringence, an attractive alternative to traditionally used crystalline materials for polarization control. This work aims to enhance the understanding of its internal structure and associated defects in its native form and after laser processing. Our observations show, for the first time, that the GLAD silica exhibits a unique Raman signature that converges to a typical silica spectrum following laser melting. Defects were also investigated with fluorescence spectroscopy. The new insight provided by this work informs our understanding of this birefringent material and drives optimization of its performance in GLAD-based polarization control devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring

For the Recycler Ring at Fermilab, space charge tune shifts of almost 0.1 will have to be dealt with under the Proton Improvement Plan (PIP-II) framework. This will lead to the excitation of third order resonances. The minimization of Resonance Driving Terms (RDTs) allows to mitigate the harmful effect of these betatron resonances. Past work has shown that previously-installed sextupoles can compensate the RDTs of individual third order resonance lines, thus reducing particle losses in these operational regimes. Nevertheless, trying to compensate multiple resonances of the same order simultaneously with these existing sextupoles is limited due to current constraints in the magnets. The following study showcases the procedure to install additional sextupoles in order to aid the compensation of multiple resonances. This includes the optimization of the new sextupoles' locations in order to cancel out multiple RDTs while minimizing the currents needed. This is followed by a verification of their effectiveness by means of the RDT response matrix.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Optimizing ICEBERG LArTPC Run Configuration for Data Collection

To ensure accurate data collection and diagnostics of the ICEBERG electronics, charge injection runs were completed using a pulser to mimic known charge deposition amounts on the LArTPC wires and collect data for analysis and calibration. This analysis is essential for optimizing the detector's performance by identifying the optimal range of DAC values that avoid saturation zones and provide the best experimental results for non-pulser runs.

Ganguly, Neil↗