Search NASA⌕ Search

SEARCH · Search NASA

Results for “Content Code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Nuclear Data Sheets for A=73☆

Experimental nuclear structure data for the known A=73 isobaric nuclides (Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Kr, Rb and Sr) have been evaluated, and presented together with Adopted properties of level energies, and associated γ rays. The decay data for these nuclides have also been evaluated, providing Adopted values of γ and β radiations, and log ft values. For {sup 73}Mn, only the isotopic identification has been established, with no knowledge of its g.s. half-life. For {sup 73}Fe, {sup 73}Co and {sup 73}Sr, only the ground states and their half-lives are known with no information about the excited states. For {sup 73}Ni, {sup 73}Cu, {sup 73}Zn and {sup 73}Rb, little data are available for excited states. The half-life and decay modes of possibly proton-unbound {sup 73}Rb need firmly established. {sup 73}Ga structure presents a special challenge in that the 1/2{sup −} ground state and the first 3/2{sup −} state have recently been proposed, in a Coulomb excitation experiment by 2010Di14, to form an almost degenerate doublet with an estimated spacing of 229 Th with its first excited state at 7.8 eV, and {sup 235}U with its first excited state at 76 eV. Ultra-high resolution gamma-ray spectroscopic studies are warranted to search for the low-lying (73 Ga, and to determine its half-life. Level structures of {sup 73}Ga, {sup 73}Ge, {sup 73}As, {sup 73}Se, {sup 73}Br and {sup 73}Kr are quite well known, although decay schemes of radioactive ground states of {sup 73}Co, {sup 73}Cu and {sup 73}Br are considered incomplete. The reactions and decays for which no new experimental information has become available since the 2003 update have undergone revisions to incorporate conversion coefficients from BrIcc code, and evaluated Q values from 2017Wa10, but essential content of such datasets may have remained the same as in previous evaluations. In this respect the present work greatly benefited from all the previous NDS evaluations (2004Si08,1993Ki25,1987Ki13, 1980Ek01,1974Al33), but at the same time data presented herein supersede all the previous published evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Draft genome of Paraburkholderia caballeronis TNe-841 T , a free-living, nitrogen-fixing, tomato plant-associated bacterium

Paraburkholderia caballeronis is a plant-associated bacterium. Strain TNe-841 T was isolated from the rhizosphere of tomato ( Solanum lycopersicum L. var. lycopersicum) growing in Nepantla Mexico State. Initially this bacterium was found to effectively nodulate Phaseolus vulgaris L. However, from an analysis of the genome of strain TNe-841 T and from repeat inoculation experiments, we found that this strain did not nodulate bean and also lacked nodulation genes, suggesting that the genes were lost. The genome consists of 7,115,141 bp with a G + C content of 67.01%. The sequence includes 6251 protein-coding genes and 87 RNA genes.

59 BASIC BIOLOGICAL SCIENCES↗

Griffin/Pronghorn PBMR-400 Benchmark Results [Slides]

Content Overview: 1) Pronghorn & Griffin, MOOSE based applications overview: Codes capabilities description & MOOSE ecosystem overiew; Current research activities and synergies with other projects; Different multiphysics coupling scheme description. 2) PBMR-400 Benchmark: OECD NEA Benchmark and Pronghorn/Griffin models description; Standalone NK Ex1 and TH Ex2 Results description; Coupled Steady state Ex3; Results analysis for Transiet Ex4a (100-40-100 Load Following) & Ex3 (Protected PLOFC). 3) Conclusions $ Future steps.

97 MATHEMATICS AND COMPUTING↗

Livewire: Automatic Annotations

Diogenes processes datasets to provide data quality metrics for the Livewire platform and creates standardized data dictionaries from data annotations. Diogenes needs data annotations that clearly outline thenformat and organization of the data. It also relies on the type, class, and unit of each data piece for comprehensive analysis, which it cannot determine independently. The Annotation Tool significantly reduces the time needed to create annotations for Diogenes by generating data annotations with the correct formatting and content. It also employs machine learning and hard-coded models to automatically annotate data class, quality type, and data units.

33 - ADVANCED PROPULSION SYSTEMS↗

Mo than meets the eye: genomic insights into molybdoenzyme diversity of Seleniivibrio woodruffii strain S4T

Abstract Seleniivibrio woodruffii strain S4T is an obligate anaerobe belonging to the phylum Deferribacterota. It was isolated for its ability to respire selenate and was also found to respire arsenate. The high-quality draft genome of this bacterium is 2.9 Mbp, has a G+C content of 48%, 2762 predicted genes of which 2709 are protein-coding, and 53 RNA genes. An analysis of the genome focusing on the genes encoding for molybdenum-containing enzymes (molybdoenzymes) uncovered a remarkable number of genes encoding for members of the dimethylsulfoxide reductase family of proteins (DMSOR), including putative reductases for selenate and arsenate respiration, as well as genes for nitrogen fixation. Respiratory molybdoenzymes catalyze redox reactions that transfer electrons to a variety of substrates that can act as terminal electron acceptors for energy generation. Seleniivibrio woodruffii strain S4T also has essential genes for molybdate transporters and the biosynthesis of the molybdopterin guanine dinucleotide cofactors characteristic of the active centers of DMSORs. Phylogenetic analysis revealed candidate respiratory DMSORs spanning nine subfamilies encoded within the genome. Our analysis revealed the untapped potential of this interesting microorganism and expanded our knowledge of molybdoenzyme co-occurrence.

Louie, Tiffany S.↗

SMT-Aware Instantaneous Footprint Optimization

Modern architectures employ simultaneous multithreading (SMT) to increase thread-level parallelism. SMT threads share many functional units and the whole memory hierarchy of a physical core. Without a careful code design, SMT threads can easily contend with each other for these shared resources, causing severe performance degradation. Minimizing SMT thread contention for HPC applications running on dedicated platforms is very challenging, because they usually spawn threads within Single Program Multiple Data (SPMD) models. To address this important issue, we introduce a simple scheme for SMT-aware code optimization, which aims to reduce the memory contention across SMT threads.

Instantaneous Footprint↗

OpenACC acceleration of an unstructured CFD solver based on a reconstructed discontinuous Galerkin method for compressible flows

Here, an OpenACC directive-based graphics processing unit (GPU) parallel scheme is presented for solving the compressible Navier–Stokes equations on 3D hybrid unstructured grids with a third-order reconstructed discontinuous Galerkin method. The developed scheme requires the minimum code intrusion and algorithm alteration for upgrading a legacy solver with the GPU computing capability at very little extra effort in programming, which leads to a unified and portable code development strategy. A face coloring algorithm is adopted to eliminate the memory contention because of the threading of internal and boundary face integrals. A number of flow problems are presented to verify the implementation of the developed scheme. Timing measurements were obtained by running the resulting GPU code on one Nvidia Tesla K20c GPU card (Nvidia Corporation, Santa Clara, CA, USA) and compared with those obtained by running the equivalent Message Passing Interface (MPI) parallel CPU code on a compute node (consisting of two AMD Opteron 6128 eight-core CPUs (Advanced Micro Devices, Inc., Sunnyvale, CA, USA)). Speedup factors of up to 24× and 1.6× for the GPU code were achieved with respect to one and 16 CPU cores, respectively. The numerical results indicate that this OpenACC-based parallel scheme is an effective and extensible approach to port unstructured high-order CFD solvers to GPU computing.

97 MATHEMATICS AND COMPUTING↗

Harmonic generation under small signal conditions in a traveling wave tube

In a klystron, charge overtaking of electrons leads to an infinity of AC current. The harmonic content therein can be calculated exactly, with or without space charge effects. This paper extends the klystron theory to a traveling wave tube (TWT). We assume that the electron motion is described by linear theory. The crowding of these linear orbits may lead to harmonic generation, as in a klystron. We calculate the buildup of harmonic content as a function of distance from the input, and compare these analytic results with the CHRISTINE code. Reasonable agreement was found. A dimensionless “bunching parameter” for TWT, 2 /( ) X P PC = in b , is identified, which characterizes the harmonic content in the AC current, where Pin is the power of the inputsignal, Pb is the DC beam power, and C is Pierce’s gain parameter.

Wong, Patrick↗

Complete genome of Polaromonas vacuolata KCTC 22033 T isolated from beneath Antarctic Sea ice

Polaromonas vacuolata KCTC 22033 T is an obligate aerobic, Gram-negative, psychrophilic and rod-shaped bacterium isolated from beneath the sea ice off the coast of the Palmer Peninsula, Anvers Islands, Antarctica. P. vacuolata is the type species of Polaromonas genus and the first example of gas vacuolate Betaproteobacteria isolated from marine habitats. In this study, we report a complete genome of P. vacuolata KCTC 22033 T , which consists of 3,837,686 bp (G + C content of 52.07%) with a single chromosome, 3461 protein-coding genes, 56 tRNAs and 6 rRNA operons. Genomic analysis revealed the presence of genes involved in bacterial adaptation under saline conditions, cold adaptation via the production of gas vesicles and cell adhesion proteins, and a photoheterotrophic lifestyle when challenged by starvation. Intriguingly, several of these genes were likely acquired from species outside the Polaromonas genus. The genomic information therefore describes the unique evolution and adaptation of P. vacuolata to its extraordinary habitat, i.e., beneath the Antarctic sea ice.

59 BASIC BIOLOGICAL SCIENCES↗

Parallel equilibrium current effect on existence of reversed shear Alfvén eigenmodes

A new fast global eigenvalue code, where the terms are segregated according to their physics contents, is developed to study Alfvén modes in tokamak plasmas, particularly, the reversed shear Alfvén eigenmode (RSAE). Numerical calculations show that the parallel equilibrium current corresponding to the kink term is strongly unfavorable for the existence of the RSAE. An improved criterion for the RSAE existence is given for with and without the parallel equilibrium current. In the limits of ideal magnetohydrodynamics (MHD) and zero-pressure, the toroidicity effect is the main possible favorable factor for the existence of the RSAE, which is however usually small. This suggests that it is necessary to include additional physics such as kinetic term in the MHD model to overcome the strong unfavorable effect of the parallel current in order to enable the existence of RSAE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Draft Genome Sequence of Pseudomonas sp. Strain B1, Isolated from a Contaminated Sediment

ABSTRACT The draft genome sequence of Pseudomonas sp. strain B1, isolated from a contaminated soil, is reported. The genome comprises 6,706,934 bases, 6,059 coding sequences, and 70 RNAs and has a G+C content of 60.3%. A suite of biodegradative genes, many located on genomic islands, were identified from strain B1, further enhancing our understanding of the versatile pseudomonads.

59 BASIC BIOLOGICAL SCIENCES↗

Thermoanaerosceptrum fracticalcis gen. nov. sp. nov., a Novel Fumarate-Fermenting Microorganism From a Deep Fractured Carbonate Aquifer of the US Great Basin

Deep fractured rock ecosystems across most of North America have not been studied extensively. However, the US Great Basin, in particular the Nevada National Security Site (NNSS, formerly the Nevada Test Site), has hosted a number of influential subsurface investigations over the years. This investigation focuses on resident microbiota recovered from a hydrogeologically confined aquifer in fractured Paleozoic carbonate rocks at 863 – 923 meters below land surface. Analysis of the microorganisms living in this oligotrophic environment provides a perspective into microbial metabolic strategies required to endure prolonged hydrogeological isolation deep underground. Here we present a microbiological and physicochemical characterization of a deep continental carbonate ecosystem and describe a bacterial genus isolated from the ecosystem. Strain DRI-13 T is a strictly anaerobic, moderately thermophilic, fumarate-respiring member of the phylum Firmicutes . This bacterium grows optimally at 55°C and pH 8.0, can tolerate a concentration of 100 mM NaCl, and appears to obligately metabolize fumarate to acetate and succinate. Culture-independent 16S rRNA gene sequencing indicates a global subsurface distribution, while the closest cultured relatives of DRI-13 T are Pelotomaculum thermopropionicum (90.0% similarity) and Desulfotomaculum gibsoniae (88.0% similarity). The predominant fatty acid profile is iso-C 15:0 , C 15:0 , C 16:0 and C 14:0 . The percentage of the straight-chain fatty acid C 15:0 is a defining characteristic not present in the other closely related species. The genome is estimated to be 3,649,665 bp, composed of 87.3% coding regions with an overall average of 45.1% G + C content. Strain DRI-13 T represents a novel genus of subsurface bacterium isolated from a previously uncharacterized rock-hosted geothermal habitat. The characterization of the bacterium combined with the sequenced genome provides insights into metabolism strategies of the deep subsurface biosphere. Based on our characterization analysis we propose the name Thermoanaerosceptrum fracticalcis (DRI-13 T = DSM 100382 T = ATCC TSD-12 T ).

16S rRNA↗

Characterisation and comparative analysis of mitochondrial genomes of false, yellow, black and blushing morels provide insights on their structure and evolution

Morchella species have considerable significance in terrestrial ecosystems, exhibiting a range of ecological lifestyles along the saprotrophism-to-symbiosis continuum. However, the mitochondrial genomes of these ascomycetous fungi have not been thoroughly studied, thereby impeding a comprehensive understanding of their genetic makeup and ecological role. In this study, we analysed the mitogenomes of 30 Morchellaceae species, including yellow, black, blushing and false morels. These mitogenomes are either circular or linear DNA molecules with lengths ranging from 217 to 565 kbp and GC content ranging from 38% to 48%. Fifteen core protein-coding genes, 28–37 tRNA genes and 3–8 rRNA genes were identified in these Morchellaceae mitogenomes. The gene order demonstrated a high level of conservation, with the cox1 gene consistently positioned adjacent to the rnS gene and cob gene flanked by apt genes. Some exceptions were observed, such as the rearrangement of atp6 and rps3 in Morchella importuna and the reversed order of atp6 and atp8 in certain morel mitogenomes. However, the arrangement of the tRNA genes remains conserved. We additionally investigated the distribution and phylogeny of homing endonuclease genes (HEGs) of the LAGLIDADG (LAGs) and GIY-YIG (GIYs) families. A total of 925 LAG and GIY sequences were detected, with individual species containing 19–48HEGs. These HEGs were primarily located in the cox1, cob, cox2 and nad5 introns and their presence and distribution displayed significant diversity amongst morel species. These elements significantly contribute to shaping their mitogenome diversity. Overall, this study provides novel insights into the phylogeny and evolution of the Morchellaceae.

59 BASIC BIOLOGICAL SCIENCES↗

Omics Tools

The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not contain Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args

Schaumberg, Andrew↗

Use of a Heat Flow Meter to Determine Active PCM Content in an Insulation

Residential and commercial roofs and walls are currently designed and tested using steady-state criteria. The resulting R-values, based on the apparent thermal conductivity, are used by building standards as an important measure of energy performance. Building envelope components, however, are subject to dynamic environmental conditions. This mismatch between the steady-state principles used in design and code requirements and their dynamic operation results in relatively low thermal efficiencies. Although several research centers have developed experimental methods for transient analysis of building envelopes, there are no standardized testing procedures available for screening materials and systems for which performance depends on dynamic response. For example, a full-scale dynamic evaluation of phase change materials (PCMs) is needed to assess their energy saving benefits. A nationally accepted small-scale (one to two foot size specimens) testing procedure is not available for the analysis of dynamic thermal characteristics of conventional thermal mass systems or PCM-enhanced materials. At the same time, data on these characteristics are necessary for whole-building simulations, energy analysis, and energy code work. The transient characteristics of PCM-enhanced products depend on the PCM content and quality. The only readily available method of thermal evaluation uses the differential scanning calorimeter. Unfortunately, this method requires small, relatively uniform test specimens. This requirement is unrealistic in the case of PCM-enhanced building envelope products such as PCM-cellulose, PCM-glass fiber, or PCM-gypsum blends. Small specimens are not representative of PCM-based blends, since these materials are not homogeneous. Jan Kosny and David Yarbrough, Oak Ridge National Laboratory, P.O. Box 2008, MS 6070, Oak Ridge, TN 37831-6070. Elizabeth Kossecka, Polish Academy of Sciences, Institute of Fundamental Technological Research, Pawinskiego 5 B, 02-106, Warsaw, Poland. A procedure for making dynamic heat-flow measurements using existing instrumentation has been developed to analyze the benefits of thermal storage. This small-scale testing method is useful for thermal analysis and as a potential quality control method for producers of PCM-enhanced building materials. The research may provide the basis for consensus standard development. This paper uses as an example a dynamic testing process for PCM-enhanced cellulose insulation.

25 ENERGY STORAGE↗