Search NASA⌕ Search

SEARCH · Search NASA

Results for “Copernicus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

An Inter-Comparison Exercise of Sentinel-2 Radiometric Validations Assessed by Independent Expert Groups

Copernicus is the European Union's Earth Observation and Monitoring programme, delivering free access to operational and historical environmental data to support applications in a wide range of societal benefit areas. To allow meaningful long-term environmental monitoring and robust decision-making, it is essential to ensure that satellite-retrieved products are of high quality and consistency. This paper describes the outputs of an international workshop on the radiometric calibration validation of the Copernicus Sentinel-2A and Sentinel-2B Multi-Spectral Instrument. A wide range of vicarious methodologies have been applied independently and then compared per type of target. All methods agree on the good radiometric performance of both Sentinel-2A and Sentinel-2B with respect to the mission requirements as well as on evidence of a slight bias between the two instruments. Comparisons of all these results are discussed to highlight the benefits and advantages of the methods as well as to propose potential improvements either for the methods themselves and/or for the comparison exercise.

Sentinel-2↗
NASA NTRSDate not supplied

Implications of the Golden Age of Remote Sensing on Earth Observation Applications in Central America

Appraising the period spanning the launch of the first Landsat satellite in 1972 to the present, the common consensus within the Earth observation (EO) community is that we are currently living in a “Golden Age of Remote Sensing,” with access to datasets, tools, and capacity building opportunities hitherto unavailable (e.g. data from Landsat, the Copernicus program, Planet / NICFI, platforms such as Google Earth Engine and SEPAL, and trainings via NASA’s ARSET and Europe's EO College). With the inter-governmental Group on Earth Observations (GEO) focusing its efforts on helping regions across the world to develop their EO capacities, Central America serves as a useful case study on the development of such capacity, with important implications for other emerging regions. A significant chapter of the region’s development of its EO capacity can be traced to 1998 when a regional body - the Central American Commission for the Environment and Development (CCAD, in Spanish) - signed a Memorandum of Understanding with NASA, which eventually led to the development of the SERVIR-Mesoamerica program, also with the support of the U.S. Agency for International Development, in 2004. The establishment of the Reducing Emissions from Deforestation and forest Degradation (REDD+) initiative in 2007 in the context of the United Nations Framework Convention on Climate Change provided additional impetus for strengthening the region’s environmental monitoring capacities. REDD+ paved the way, over the past decade, for the region’s countries to benefit from cooperation with the Germany development agency, GIZ, and the United States’ SilvaCarbon initiative. By 2021, the CCAD’s parent body - the Central American Integration System (SICA, in Spanish) - had also entered into collaborations with not only NASA, but other entities, including the Copernicus program, the Japanese Aerospace Exploration Agency, and the United Nations Office for Outer Space Affairs, and the region is also engaging with GEO’s AmeriGEO regional initiative. Nevertheless, the aforementioned collaborative efforts only convey part of the case study regarding Central America’s EO capacity. This presentation will also examine applications aspects, as well as implications for the development of EO capacity in other regions, including via regional GEO initiatives.

Earth observation↗
NASA NTRSDate not supplied

Multi-Decadal Nitrogen Dioxide and Derived Products from Satellites (MINDS) Datasets Released by NASA GES DISC and Their Applications for Air Quality

Nitrogen dioxide (NO2), a pervasive air pollutant, comes from vehicles, power plants, industrial emissions, and off-road sources such as construction or lawn and gardening equipment. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) curates many remote sensing datasets with NO2 retrievals, which have been utilized for air quality research and applications. The remotely-sensed datasets include those generated by the Ozone Monitoring Instrument (OMI) on the Aura satellite, the TROPOspheric Monitoring Instrument (TROPOMI) onboard the Copernicus Sentinel-5 Precursor (S5P), and the Ozone Mapping and Profiling Suite (OMPS) Nadir-Mapper (NM) instrument on the Suomi National Polar-orbiting Partnership (S- NPP). In collaboration with the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) Multi-Decadal Nitrogen Dioxide and Derived Products from Satellites (MINDS) project, the GES DISC recently released MINDS datasets. The NASA MEaSUREs MINDS project aims to develop long-term NO2 global data records by adapting a consistent retrieval algorithm to multiple instrument measurements. Long-term data records will be achieved by applying consistent retrieval approaches to multiple satellite instruments, including OMI (2004 - ); the Global Ozone Monitoring Experiment (GOME, 1995-2011) onboard the second European Remote Sensing satellite (ERS-2); the Scanning Imaging Spectrometer for Atmospheric Cartography (SCIAMACHY, 2002-2012) onboard the ENVIronmental SATellite (ENVISAT); GOME-2 on the Meteorological Operational satellites (MetOp-A and MetOp-B, 2006 - ); and TROPOMI onboard the Copernicus S5P (2017 - ). The long-term record (1995 to present) of MINDS datasets makes them very useful for air quality trend studies. Some MINDS datasets with high spatial resolution of only a few kilometers can be used for air quality research and applications at regional scales. In this presentation, we will introduce all of the MINDS products and services, and demonstrate use cases of MINDS data for studying air quality. We will also present a few other NO2 datasets acquired from NASA’s Health and Air Quality Applied Sciences Team (HAQAST), to be archived and distributed by the GES DISC, and highlight some of their applications for air quality and health.

Feng Ding↗
NASA NTRS2023

Flight Mechanics Analysis Tools Interoperability and Component Sharing

Several NASA centers have developed independent flight mechanics tools to meet the science needs of missions. This NASA Engineering and Safety Center (NESC) assessment sought to explore the ways to increase the interoperability of three specific tools: Copernicus from Johnson Space Center (JSC), the General Mission Analysis Tool (GMAT) from Goddard Spaceflight Flight Center (GSFC), and the Mission-Analysis Operations Navigation Toolkit Environment (MONTE) from the Jet Propulsion Laboratory (JPL). Before this assessment, these tools were not integrated and could not easily share data, models, or components. This report contains the outcome of the NESC assessment.

General Mission Analysis Tool↗
NASA NTRS2023

Flight Mechanics Analysis Tools Interoperability and Component Sharing

As multiple flight mechanics (FM) analysis tools are developed to meet the unique scientific and operational requirements of NASA missions, sharing data, transferring models and trajectory information between tools can be complicated. The NESC recently explored ways that increase interoperability of three mission analysis tools: Copernicus, General Mission Analysis Tool (GMAT), and Mission-Analysis Operations Navigation Toolkit Environment (MONTE). These tools are used to generate a variety of products throughout all phases of a mission including: maneuver planning, trajectory optimization and design, orbit determination, performance and error analysis, trade studies and sizing. Establishing a framework to share models, component data and trajectory information is an efficient way to leverage the benefits of an analysis tool without expending development costs to duplicate functionality.

Flight Mechanics Simulation↗
NASA NTRS2023

Atmospheric Correction Inter-comparison eXercise, ACIX-II Land: An Assessment of Amospheric Correction Processors for Landsat 8 and Sentinel-2 Over Land

The correction of the atmospheric effects on optical satellite images is essential for quantitative and multi-temporal remote sensing applications. In order to study the performance of the state-of-the-art methods in an integrated way, a voluntary and open-access benchmark Atmospheric Correction Inter-comparison eXercise (ACIX) was initiated in 2016 in the frame of Committee on Earth Observation Satellites (CEOS) Working Group on Calibration & Validation (WGCV). The first exercise was extended in a second edition wherein twelve atmospheric correction (AC) processors, a substantially larger testing dataset and additional validation metrics were involved. The sites for the inter-comparison analysis were defined by investigating the full catalogue of the Aerosol Robotic Network (AERONET) sites for coincident measurements with satellites' overpass. Although there were more than one hundred sites for Copernicus Sentinel-2 and Landsat 8 acquisitions, the analysis presented in this paper concerns only the common matchups amongst all processors, reducing the number to 79 and 62 sites respectively. Aerosol Optical Depth (AOD) and Water Vapour (WV) retrievals were consequently validated based on the available AERONET observations. The processors mostly succeeded in retrieving AOD for relatively light to medium aerosol loading (AOD < 0.2) with uncertainties <0.08, while the overall uncertainty values were typically 0.23 ± 0.15. Better performances were observed for WV retrievals with >90% of the results falling within the suggested empirical specifications and with the Root Mean Square Error (RMSE) being mostly <0.25 g/cm2. Regarding Surface Reflectance (SR) validation two main approaches were followed. For the first one, a simulated SR reference dataset was computed over all of the test sites by using the 6SV (Second Simulation of the Satellite Signal in the Solar Spectrum vector code) full radiative transfer modelling (RTM) and AERONET measurements for the required aerosol variables and water vapour content. The performance assessment demonstrated that the retrievals were not biased for most of the bands. The uncertainties ranged from approximately 0.003 to 0.01 (excluding B01) for the best performing processors in both sensors' analyses. For the second one, measurements from the radiometric calibration network RadCalNet over La Crau (France) and Gobabeb (Namibia) were involved in the validation. The performance of the processors was in general consistent across all bands for both sensors and with low standard deviations (<0.04) between on-site and estimated surface reflectance. Overall, our study provides a good insight of AC algorithms' performance to developers and users, pointing out similarities and differences for AOD, WV and SR retrievals. Such validation though still lacks of ground-based measurements of known uncertainty to better assess and characterize the uncertainties in SR retrievals.

Atmospheric correction↗
DOE OSTI2025

Assessment of Extinction‐, Satellite‐, and Model‐Based Vertical Cloud Condensation Nuclei (CCN) Retrieval Methods Using Airborne CCN Measurements Over the Southern Great Plains

Abstract Accurate estimates of the vertical profile of cloud condensation nuclei (CCN) concentration are crucial to better quantify aerosol‐cloud interactions. We assessed the correlation between the vertical CCN concentrations obtained from extinction‐, satellite‐, and model‐based retrieval methods and airborne CCN concentrations collected at 0.24% supersaturation within the 3, 9, 27, and 81 km regions centered over the U.S. Department of Energy's Atmospheric Radiation Measurement User Facility Southern Great Plains (SGP) site during the spring and summer of 2016. The extinction profiles at a wavelength 355 nm were provided by the ground‐based Raman lidar. Our analysis showed moderate correlation between dry‐corrected extinction and airborne CCN data. We found the retrieved number concentration of CCN (RNCCN) method showed regression best‐fit slopes close to unity and consistent prediction errors for the majority of the data. The Lenhardt et al. (2023, https://doi.org/10.5194/amt‐16‐2037‐2023 ) method showed similar conclusions but only during spring, whereas the Mamouri and Ansmann (2016, https://doi.org/10.5194/acp‐16‐5905‐2016 ) method showed poor correlation. The Shinozuka et al. (2015, https://doi.org/10.5194/acp‐15‐7585‐2015 ) satellite‐based method exhibited reasonable agreement during summer but poor correlation during periods where both high (∼1,400 #/cm 3 ) and low (∼50 #/cm 3 ) airborne CCN concentrations were observed. The Copernicus Atmosphere Monitoring Service reanalysis modeled 3‐D CCN data set showed a moderate to weak positive correlation but performed poorly at high airborne CCN concentrations. Our analysis suggests the extinction‐based RNCCN method performed better than other methods across most observation periods under the diverse meteorological conditions observed at the SGP site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The detection of marine microseismic activity with the CUORE tonne-scale cryogenic experiment

Vibrations from experimental setups and the environment are a persistent source of noise for low-temperature calorimeters searching for rare events, including neutrinoless double beta ( 0νββ ) decay or dark matter interactions. Such noise can significantly limit experimental sensitivity to the physics case under investigation. Here, we report the detection of marine microseismic vibrations using mK-scale calorimeters. This study employs a multi-device analysis correlating data from CUORE, the leading experiment in the search for 0νββ decay with mK-scale calorimeters, and the Copernicus Earth Observation program, revealing the seasonal impact of Mediterranean Sea activity on CUORE’s energy thresholds, resolution, and sensitivity over four years. The detection of marine microseisms underscores the need to address faint environmental noise in ultra-sensitive experiments. Understanding how such noise couples to the detector and developing mitigation strategies is essential for next-generation experiments. We demonstrate one such strategy: a noise decorrelation algorithm implemented in CUORE using auxiliary sensors, which reduces vibrational noise and improves detector performance. Enhancing sensitivity to 0νββ decay and to rare events with low-energy signatures requires identifying unresolved noise sources, advancing noise reduction methods, and improving vibration suppression systems, all of which inform the design of next-generation rare event experiments.

experimental nuclear physics↗
DOE OSTI2025

Towards provision of regularly updated climate data from the Coupled Model Intercomparison Project

The Coupled Model Intercomparison Project (CMIP) is a flagship of the World Climate Research Programme (WCRP). CMIP has become a recognised ‘brand’ in climate circles evolving over the last thirty years from a targeted research activity by a small number of climate modelling centres intercomparing their Earth System Model (ESM) simulations to a broad international coordinated research effort (Durack et al, 2025). CMIP is organized as a research activity leveraging funded and in-kind contributions from experts within modelling centres and the broader scientific community supported more recently by a fully-funded International Project Office. Within CMIP, Model Intercomparison Projects (MIPs) are community-designed to understand past, present and future climate. CMIP data provides a valuable resource for climate research and is routinely used to assess model representation of climate processes and test scientific hypotheses in the context of model uncertainty and (forced and internal) variability as evident from its prolific use in scientific publications1 . The impact relies on enabling infrastructure (most prominently via the Earth System Grid Federation (ESGF)), which allows sharing of simulation output, provision of the boundary conditions used in each simulation, and definition of the data standards that are essential to facilitating wide use of the data. The impact is supplemented by the wide-ranging scrutiny to which model simulations are subjected. Beyond its use in research, CMIP data is a key resource for communities producing derived climate information from downscaling and impact studies, such as the Coordinated Regional Downscaling Experiment (CORDEX; Gutowski et al., 2016) and the Intersectoral Impacts MIP (ISIMIP; Frieler et al., 2024). Government, academic and commercial entities also increasingly rely on CMIP and its downstream data for climate risk assessments and climate services (for example, Copernicus Climate Change Service and World Bank portal). This means that, although CMIP is a research activity, it increasingly serves a secondary and very relevant role as a provider of climate data – a long-recognised dichotomy (Stevens, 2024). Research and applications have distinct needs, with the former requiring flexibility and generality and the latter consistency. Here we explain how the design of the research activity has been adapted to reduce the burdens imposed by applications and how the research infrastructure might evolve to further enable scientific inquiry. We propose one possible approach to consistently providing model information and projections for applications in the future.

Environmental sciences↗
DOE OSTI2025

ERA5-Land Data for LASSO-CACTI Overview Paper

The European Centre for Medium-Range Weather Forecasts (ECMWF) generated a soil reanalysis dataset for the land component of the fifth generation of European ReAnalysis (ERA5), referred to as ERA5-Land. This is a model-generated dataset, with the original version available for the period 1950 to present. The version archived in this DOE ARM product is a subset of the data is for the period of the CACTI field campaign plus several preceding months, specifically from August 1, 2018 through March 22, 2019 with hourly intervals. The ARM copy is also a sub-region of the original global product; the ARM copy is for -60 to -5 °N by -105 to -30 °W. Only variables necessary to drive the WRF-Hydro model are included, which are the 2-m temperature and specific humidity, 10-m wind components, surface pressure, rain rate, and downward surface short and longwave radiation. These data have been obtained from the Copernicus Data Store.

10m wind u-component↗
NASA NTRS1972

Bistatic-radar investigation

A bistatic-radar study during the Apollo 15 flight is reviewed, with the orbiting command module as one terminal. Bistatic-radar slopes are compared to geological maps of Copernicus and Riphaeus mountain regions and Kepler region. Basic theory is discussed, including the radar echoes composed of the sum of the reflections from the moon area that is mutually visible from the spacecraft and earth. A signal receiving system and data processing system are outlined schematically.

Howard, H. T.↗
NASA NTRS1971

Sedimentology of Apollo 11 and 12 lunar soils.

Differences in the modal composition of samples from an Apollo 11 core tube (10005) suggest the presence of at least three depositional units. The double-drive-tube core sample from the Apollo 12 site shows evidence of at least 16 depositional episodes. The earliest recognizable event at the Apollo 12 site carried light-colored soil rich in feldspathic-rock fragments into the area and may be related to ejection of ray material from Copernicus. Prior to the formation of Surveyor Crater at least 11 depositional episodes took place. Unit 7-8, the thickest unit intersected by the core tube, is tentatively identified as the Surveyor Crater ejecta blanket. Most of the soil at the Apollo 11 and 12 sites was probably generated locally with a smaller contribution coming from a more distant source possibly in the lunar highlands.

Lindsay, J. F.↗
NASA NTRS1972

Observations of the total lunar eclipse on February 10, 1971 at 3.1 mm wavelength.

Observations were made of the total lunar eclipse on February 10, 1971 at a wavelength of 3.1 mm at the Millimeter Wave Observatory of the University of Texas at Austin. Eclipse cooling curves obtained for Copernicus, Mare Serenitatis, and a mountainous region indicate maximum temperature decreases of 6.77%, 6.37%, and 7.51%, respectively. Cooling rates of about 6 K/hour were measured. The normalized solar insolation has also been calculated for each region.

Ulich, B. L.↗
NASA NTRS1972

Structure of Sierra Madera, Texas, as a guide to central peaks of lunar craters.

The central peaks of Copernicus or a similar lunar crater have been considered as a target for manned exploration, partly on the supposition that the peaks expose rock uplifted from beneath the crater floor. This supposition is based on an analogy with central uplifts of terrestrial cryptoexplosion structures. Sierra Madera in west Texas is one of these structures. The structure of its central uplift is described as a proposed analog of the central peaks of large lunar impact craters. Setting and stratigraphy of the Sierra Madera are discussed together with structural framework, the central uplift, fold patterns, and fault patterns. It is concluded that the central uplifts of Sierra Madera and similar cryptoexplosion structures appear to be analogous to central peaks of large lunar impact craters.

Howard, K. A.↗
NASA NTRS1972

Lunar secondary craters, part K

Formation of V-shaped structures surrounding the fresh Copernicus Crater and its secondary craters are reviewed, and preliminary observations of the more extensively eroded secondary crater field of Theophilus are presented. Results of laboratory simulation of secondary lunar craters to examine their effects on V-shaped ridges are also described.

Overbeck, V. R.↗
NASA NTRS1972

Noritic fragments in the Apollo 14 and 12 soils and the origin of Oceanus Procellarum.

Fragments of noritic breccias having a range of recrystallization textures and noritic basalts comprise about 80% of the 1 to 2 mm soil samples from Cone Crater (14142) and the bottom of the trench (14151). In five other samples, noritic fragments range in abundance from 42 to 56%. The remaining particles in each case are glasses, soil breccias, and glass-bonded aggregates; other crystalline rock types such as anorthosites constitute less than 1% of the soil. Noritic materials - i.e., Apollo 12 and 14 norites and ropy (KREEP) glass particles, can be divided into two broad groups on a chemical basis. The particles in one group have relatively high bulk TiO2 contents and high Fe/(Fe + Mg) ratios in their normative pyroxenes; the ropy glasses from Apollo 12 and 14 and a few Apollo 12 noritic rock fragments are in this category. Particles in the other class contain pyroxenes with a lower Fe/(Fe + Mg) and have a range of TiO2 contents; most noritic rock fragments from Apollo 12 and 14 are in this group. The ropy glasses may be from Copernicus or other rayed craters, but almost all the norites derive from the Fra Mauro formation or other noritic occurrences associated with Oceanus Procellarum.

Taylor, G. J.↗
NASA NTRS1972

Provenance of Apollo 12 KREEP.

Possible origins of KREEP in Apollo 12 lunar samples are evaluated in terms of their probabilities. Preference is given to the assumption that the KREEP may be a mixture of roughly equal proportions of (1) ejecta from Copernicus, (2) ejecta from Reinhold, (3) ejecta from local highlands, and (4) material excavated from Fra Mauro deposits buried below the landing site.

Wasson, J. T.↗