Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coupled process modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Particle behavior in the magnetosphere

The Rice Convection Model deals with large-scale processes in the earth's inner and middle magnetosphere, including coupling to the ionosphere. Starting from appropriate initial and boundary conditions, the model computes the following physical parameters: ionospheric electric fields and currents; magnetospheric particle distributions, electric fields, and electric currents; and magnetic-field-aligned (Birkeland) currents connecting the two regions. This paper evaluates work on the model, with emphasis on the assumptions made, the basic equations, and the numerical methods. The theoretical basis of the model is compared and contrasted with standard magnetohydrodynamics. The limitations imposed by the major assumptions are discussed. Model inputs and boundary conditions are listed, and the methods of specifying them discussed. Some physical conclusions and insights that have been gained from the model are listed and described very briefly. References are given to published discussions of the major points of physics.

Wolf, R. A.↗

What Processes are Defining the Ionospheric Conductivity and its Variability During Geomagnetic Disturbances?

Modeling of electrodynamic coupling between the magnetosphere, ionosphere, and upper atmosphere (MIA) depends on accurate specification of ionospheric conductance produced by auroral precipitation of high-energy electrons and ions. The precipitation of energetic electrons into the ionosphere is the result of a three-step process that relies on the proper selections of the simulation tools for the ionospheric conductivity studies, while observation can only measure the results of the three steps. In the region of diffuse aurora, the first step is the initiation of electron precipitation into both magnetically conjugate foot points from the Earth’s magnetosphere via wave-particle interactions. The second step is the multiple atmospheric backscatters (or reflections) of electrons at the two magnetic conjugate points, which produces secondary superthermal electron fluxes. The third step is namely the self-consistent electric and magnetic fields that influence magnetospheric particle transport and re-distribute precipitating electrons and ions through the ionospheric electrodynamics. These steps are especially important for revealing electron precipitation dynamics that carry most of the energy in the aurora, resulting also from ion precipitation production and the formation of ionospheric conductance during geomagnetic disturbances. We demonstrate all above results based on SuperThermal Electron Transport (STET), Superthermal Proton, Electron and Atomic Hydrogen tRansport in the Ionosphere and Thermosphere (SPEAH-RIT), and Comprehensive Inner Magnetosphere and Ionospere (CIMI) codes developed at NASA Goddard Space Flight Center.

George V. Khazanov↗

Numerical study of high-area-ratio H2/O2 rocket nozzles

Calculations were made for high-area-ratio H2/O2 rocket nozzles by using the RPLUS code which employs an implicit finite volume, lower-upper symmetric successive over-relaxation scheme to solve the Navier-Stokes equations and the species equations in a coupled manner. The combustion processes of hydrogen and oxygen are modeled by an 8-species and 18-step reaction mechanism, and the turbulence is simulated by the Baldwin-Lomax turbulence model with a pressure gradient correction on the van Driest's damping constant in the inner-layer model. The calculated results for two different rocket nozzles are presented as contours, profiles, and performance values. The predicted specific impulse and thrust agree well with the experimental data and those from the industry standard code. It is demonstrated that the RPLUS code can be used for analysis of rocket nozzles.

Kim, S. C.↗

An Atmospheric Science Observing System Simulation Experiment (OSSE) Environment

An atmospheric sounding mission starts with a wide range of concept designs involving measurement technologies, observing platforms, and observation scenarios. Observing system simulation experiment (OSSE) is a technical approach to evaluate the relative merits of mission and instrument concepts. At Jet Propulsion Laboratory (JPL), the OSSE team has developed an OSSE environment that allows atmospheric scientists to systematically explore a wide range of mission and instrument concepts and formulate a science traceability matrix with a quantitative science impact analysis. The OSSE environment virtually creates a multi-platform atmospheric sounding testbed (MAST) by integrating atmospheric phenomena models, forward modeling methods, and inverse modeling methods. The MAST performs OSSEs in four loosely coupled processes, observation scenario exploration, measurement quality exploration, measurement quality evaluation, and science impact analysis.

mission concepts↗

NASA's Earth Observing System: The Transition from Climate Monitoring to Climate Change Prediction

Earth's 4.5 billion year history is a study in change. Natural geological forces have been rearranging the surface features and climatic conditions of our planet since its beginning. There is scientific evidence that some of these natural changes have not only led to mass extinctions of species (e.g., dinosaurs), but have also severely impacted human civilizations. For instance, there is evidence that a relatively sudden climate change caused a 300-year drought that contributed to the downfall of Akkadia, one of the most powerful empires in the Middle-East region around 2200 BC. More recently, the "little ice age" from 1200-1400 AD forced the Vikings to abandon Greenland when temperatures there dropped by about 1.5 C, rendering it too difficult to grow enough crops to sustain the population. Today, there is compelling scientific evidence that human activities have attained the magnitude of a geological force and are speeding up the rate of global change. For example, carbon dioxide levels have risen 30 percent since the industrial revolution and about 40 percent of the world's land surface has been transformed by humans. We don't understand the cause-and-effect relationships among Earth's land, ocean, and atmosphere well enough to predict what, if any, impacts these rapid changes will have on future climate conditions. We need to make many measurements all over the world, over a long period of time, in order to assemble the information needed to construct accurate computer models that will enable us to forecast climate change. In 1988, the Earth System Sciences Committee, sponsored by NASA, issued a report calling for an integrated, long-term strategy for measuring the vital signs of Earth's climate system. The report urged that the measurements must all be intimately coupled with focused process studies, they must facilitate development of Earth system models, and they must be stored in an information system that ensures open access to consistent, long-term data. This committee emphasized that the only feasible way to collect these consistent, long-term data is through the use of space-based Earth "remote sensors" (instruments that can measure from a distance things like temperature).

King, Michael D.↗

Space Shuttle critical function audit

A large fault-tolerance model of the main propulsion system of the US space shuttle has been developed. This model is being used to identify single components and pairs of components that will cause loss of shuttle critical functions. In addition, this model is the basis for risk quantification of the shuttle. The process used to develop and analyze the model is digraph matrix analysis (DMA). The DMA modeling and analysis process is accessed via a graphics-based computer user interface. This interface provides coupled display of the integrated system schematics, the digraph models, the component database, and the results of the fault tolerance and risk analyses.

Sacks, Ivan J.↗

Explicit modeling and computational load distribution for concurrent processing simulation of the space station

Two important aspects of concurrent processing under development at TRW are discussed. These are: (1) the derivation of explicit mathematical models of multibody dynamic systems, and (2) a balanced computational load distribution (BCLD) among loosely coupled computational units (processors) of a concurrent processing system. The developed methodologies are demonstrated by way of an application to the Phase 1 of the Space Station - a task being performed by TRW under NASA/JSC contract NAS9-17778. The mathematical model of the Space Station consists of three interconnected flexible bodies capable of undergoing large, rigid-body motion with respect to each other. Body 1 is the main central body and contains the pressurized modules inboard of the two Alpha gimbals. Bodies 2 and 3 are the starboard and port bodies connected to Body 1 at the Alpha gimbals and include all components on the transverse booms outboard of the Alpha gimbals (including the solar arrays). The control systems in the model maintain Body 1 in a prescribed 3-axis attitude control mode, while producing large-angle rotations of the flexible solar arrays to position them normal to the sun-line.

Gluck, R.↗

Hybrid Reduced Order Model for N2-N2 Interactions for Application to Dissociation and Energy Transfer Processes

This work presents a general framework for model reduction of non-equilibrium energy transfer and dissociation processes. The multi-group maximum-entropy method is coupled with the quasi-classical trajectory method to directly construct a reduced order model for chemical non-equilibrium. Kinetic data is calculated by applying detailed balance at a microscopic level, overcoming the limitation of calculating recombination kinetic data. This approach enables the construction of a reduced order model for kinetics which bypasses the need to compute state-to-state kinetic data. This physics based reduced order model ensures that an equilibrium distribution is reached given infinite time, while allowing for non-equilibrium distributions during the relaxation and dissociation processes. A proof-of-concept test case demonstrates the applicability of this model by comparison with state-to-state kinetic data for the N2(Chi (sup 1) Sigma ((sub g), (sup plus sign)) minus N ((exp 4) S (sub u)) system with excellent agreement.

Maximum Entropy↗

A New Unsteady Model for Dense Cloud Cavitation in Cryogenic Fluids

A new unsteady, cavitation model is presented wherein the phase change process (bubble growth/collapse) is coupled to the acoustic field in a cryogenic fluid. It predicts the number density and radius of bubbles in vapor clouds by tracking both the aggregate surface area and volume fraction of the cloud. Hence, formulations for the dynamics of individual bubbles (e.g. Rayleigh-Plesset equation) may be integrated within the macroscopic context of a dense vapor cloud i.e. a cloud that occupies a significant fraction of available volume and contains numerous bubbles. This formulation has been implemented within the CRUNCH CFD, which has a compressible real fluid formulation, a multi-element, unstructured grid framework, and has been validated extensively for liquid rocket turbopump inducers. Detailed unsteady simulations of a cavitating ogive in liquid nitrogen are presented where time-averaged mean cavity pressure and temperature depressions due to cavitation are compared with experimental data. The model also provides the spatial and temporal history of the bubble size distribution in the vapor clouds that are shed, an important physical parameter that is difficult to measure experimentally and is a significant advancement in the modeling of dense cloud cavitation.

Hosangadi, A.↗

Effects of Material Degradation on the Structural Integrity of Composite Materials: Experimental Investigation and Modeling of High Temperature Degradation Mechanisms

It has previously been demonstrated that simple coupled reaction-diffusion models can approximate the aging behavior of PMR-15 resin subjected to different oxidative environments. Based on empirically observed phenomena, a model coupling chemical reactions, both thermal and oxidative, with diffusion of oxygen into the material bulk should allow simulation of the aging process. Through preliminary modeling techniques such as this it has become apparent that accurate analytical models cannot be created until the phenomena which cause the aging of these materials are quantified. An experimental program is currently underway to quantify all of the reaction/diffusion related mechanisms involved. The following contains a summary of the experimental data which has been collected through thermogravimetric analyses of neat PMR-15 resin, along with analytical predictions from models based on the empirical data. Thermogravimetric analyses were carried out in a number of different environments - nitrogen, air and oxygen. The nitrogen provides data for the purely thermal degradation mechanisms while those in air provide data for the coupled oxidative-thermal process. The intent here is to effectively subtract the nitrogen atmosphere data (assumed to represent only thermal reactions) from the air and oxygen atmosphere data to back-figure the purely oxidative reactions. Once purely oxidative (concentration dependent) reactions have been quantified it should then be possible to quantify the diffusion of oxygen into the material bulk.

Cunningham, Ronan A.↗

Comprehensive Digital Twin of a Macro-fluidic Electrochemical Reactor to Optimize the Electrochemical-based Recovery of O2 from Metabolic CO2

Future long-duration missions will require a sustainable and efficient system capable of yielding a minimum of 75% O 2 recovery from metabolic CO 2 to achieve self-sufficiency for long space missions beyond Earth's low orbit. A Macro-fluidic Electrochemical Reactor (MFECR) development effort to electrochemically recover O 2 from CO 2 is underway at NASA Marshall Space Flight Center (MSFC) to increase current O 2 recovery efficiency and reduce air revitalization (AR) system complexity at the International Space Station (ISS) habitat and future long missions. The authors have developed and deployed a digital twin of an actual single cell of the MFECR via a comprehensive 3D multiphysics model that thoroughly replicates the exact configuration and fluid/material domains of the MFECR. This model's electrochemical physics consists of multicomponent-multiphase electrochemical-driven reactions leading to CO 2 conversion to C 2 H 4 and CO along with the formation of H 2 on the cathode in parallel with the generation of O 2 and H 2 O on the anode. This electrochemical model is coupled with all the physics phenomena involved in the process, including but not limited to fluid and non-ideal mass transfer of reactant and product species in free and porous media, convective/conduction/radiative heat transfer, and conduction of DC electrical current with Joule heating generation. The digital twin has proved to be an essential tool for performing different qualitative studies, including the effect of reducing the height (increasing the respect ratio) of the serpentine walls, leading to a further redesign of the EDU (the newly redesigned MFECR EDU has been fabricated and is expected to be used in future tests), the evaluation of setting different MFECRs connected in series, and the assessment of feeding air directly to the MFECR skipping the preceding metabolic CO 2 separation from air. The MFECR's test stand is fully automated and equipped with several inline measurements (flow, pressure, temperature, pH, component concentration) systems on all six MFECR's IO streams, allowing reliable experimental validation of the model, parametric determination of all electrochemical reactions, and process optimization.

Jesus A Dominguez↗

Computational Modeling as a Design Tool in Microelectronics Manufacturing

Plans to introduce pilot lines or fabs for 300 mm processing are in progress. The IC technology is simultaneously moving towards 0.25/0.18 micron. The convergence of these two trends places unprecedented stringent demands on processes and equipments. More than ever, computational modeling is called upon to play a complementary role in equipment and process design. The pace in hardware/process development needs a matching pace in software development: an aggressive move towards developing "virtual reactors" is desirable and essential to reduce design cycle and costs. This goal has three elements: reactor scale model, feature level model, and database of physical/chemical properties. With these elements coupled, the complete model should function as a design aid in a CAD environment. This talk would aim at the description of various elements. At the reactor level, continuum, DSMC(or particle) and hybrid models will be discussed and compared using examples of plasma and thermal process simulations. In microtopography evolution, approaches such as level set methods compete with conventional geometric models. Regardless of the approach, the reliance on empricism is to be eliminated through coupling to reactor model and computational surface science. This coupling poses challenging issues of orders of magnitude variation in length and time scales. Finally, database development has fallen behind; current situation is rapidly aggravated by the ever newer chemistries emerging to meet process metrics. The virtual reactor would be a useless concept without an accompanying reliable database that consists of: thermal reaction pathways and rate constants, electron-molecule cross sections, thermochemical properties, transport properties, and finally, surface data on the interaction of radicals, atoms and ions with various surfaces. Large scale computational chemistry efforts are critical as experiments alone cannot meet database needs due to the difficulties associated with such controlled experiments and costs.

Meyyappan, Meyya↗

Computer modeling of thermoelectric generator performance

Features of the DEGRA 2 computer code for simulating the operations of a spacecraft thermoelectric generator are described. The code models the physical processes occurring during operation. Input variables include the thermoelectric couple geometry and composition, the thermoelectric materials' properties, interfaces and insulation in the thermopile, the heat source characteristics, mission trajectory, and generator electrical requirements. Time steps can be specified and sublimation of the leg and hot shoe is accounted for, as are shorts between legs. Calculations are performed for conduction, Peltier, Thomson, and Joule heating, the cold junction can be adjusted for solar radition, and the legs of the thermoelectric couple are segmented to enhance the approximation accuracy. A trial run covering 18 couple modules yielded data with 0.3% accuracy with regard to test data. The model has been successful with selenide materials, SiGe, and SiN4, with output of all critical operational variables.

Chmielewski, A. B.↗

Nebular volatile fractionations associated with chondrule formation

Chondrules are ubiquitous constituents of primitive solar system matter, indicating that chondrule formation was an important and widespread process in the early history of the solar system. If chondrules formed from fine grained CI like precursors, some volatile fractionation must have accompanied chondrule formation. This is not likely related to a separation of chondrules from gas (and dust, fine enough to be coupled to gas) shortly after formation, a process required by most models of chondrule formation. If chondrules are continuously formed in and removed from a region of the solar nebula, the chemical environment in this region will change. Vaporization of solid increases both oxygen and sulfur in the gas relative to H. Depending on the oxygen/sulfur ratio, which may vary widely as a function of precursor composition and temperature, two cases can be distinguished: (1) sulfur requires reaction with solid to condense, and thus may become much more enriched than 0; (2) if a significant amount of silicate is vaporized together with sulfides and does not recondense, changes in H/O outweigh S enrichment. In combination, these two effects may be able to account for much of the chemical variation among various types of chondrites. Opaque, fine grained matrix in unequilibrated chondrites, which is thought to derive from dust, has indeed been found to have a volatile element abundance complementary to chondrules.

Kracher, A.↗

Interaction of surface radiation with convection in crystal growth by physical vapor transport

Growth of single crystals from vapor in closed ampoules is governed by an intricate interplay between mass, momentum and heat transfer processes. The objective of this study is to examine and isolate the effects of surface radiation heat transfer on the vapor transport process using a mathematical model. The model consists of a set of coupled nonlinear partial differential equations for conservation of mass, momentum, energy and species, and the integrodifferential equations which represent radiative exchange. It depends on five important physical parameters. These are Grashof number, Prandtl number, Schmidt number, aspect ratio and the radiation-conduction number. The effects of these dimensionless groupings are systematically investigated. From the cases examined, it is concluded that surface radiation can change the flow structure appreciably. This is especially true in microgravity environment where radiation competes primarily with conduction in modifying the thermal profiles. The numerical results also show that in the presence of radiation, the top heating configuration (source on top) is no longer stable and that near the growing crystal, radiation-induced vortices can introduce significant nonuniformities in the growth flux.

Kassemi, Mohammad↗

Reconnection voltage as a function of IMF clock angle

Magnetic reconnection between the IMF and the geomagnetic field is thought to play a major role in the transfer of solar wind momentum and energy to the magnetosphere. Both analytic modeling and analysis of geophysical data have shown that this coupling process should be a sensitive function of the clock angle of the IMF. Results are presented from a three-dimensional, MHD, global numerical simulation code for the reconnection voltage between the closed geomagnetic field and the IMF as a function of the IMF clock angle. These results are consistent with a sin(theta/2) functional behavior.

Fedder, J. A.↗

Investigation of Boundary Layer Development in Multi-Stage Low Pressure

A review of recent literature has been made in the areas of unsteady measurement in turbomachinery and LP turbine design. This has included a detailed review of methods for extracting quantitative shear stress data from surface mounted hot-film arrays. Research goals were identified on the basis of the literature survey and following interaction with the GE and NASA contracts. Progress has also been made in the detailed planning of the research program. An array of hot-film sensors has been mounted at mid-span on a second stage nozzle blade ready for installation in the current turbine buildup. A new technique of applying the hot-film array using double sided adhesive is being tested. The temperature in the vicinity of the hot-films will be monitored using a thermocouple attached to the blade pressure surface. This will increase the accuracy of the data reduction process compared with the methods applied by Halstead et at. (1995) and others. Data obtained from this first set of sensors, along with data from the hot-wire investigation will help to determine the best locations for surface hot-film instrumentation for subsequent builds of the turbine. Other LSRT instrumentation issues which have been addressed include calibration of the torque measurement system and procurement of custom design hot-wire sensors required to compensate for the slope flow path. Preliminary attempts at modeling the boundary layer transition process have been completed. A steady, coupled viscous-inviscid flow solver (the MISES code of Drela and Youngren) was used to calculate the steady-flow boundary layer transition location.

Source record↗