Search NASA⌕ Search

SEARCH · Search NASA

Results for “Crystal melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

156 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Structure of molten ytterbium aluminum garnet

Rare earth aluminum garnets are important materials in optical, dielectric, and thermal barrier applications. To advance the understanding of their melt processing and glass forming ability, we report the atomic structure of molten Yb 3 Al 5 O 12 over 1770–2630 K, which spans the equilibrium and supercooled liquid regimes. The melt density at T m = 2283 K is 5.50 g cm –3 , measured via silhouette imaging of electrostatically levitated drops over 1010–2420 K. Four separate structure measurements were made with aerodynamically levitated melts using x-ray and neutron diffraction with isotope substitution of Yb ( 172 Yb, 174 Yb, or nat Yb). Empirical potential structure refinement models were developed, which are in excellent agreement with the experiments. Coordination environments for Al–O are predominantly 4- and 5-coordinate, with a mean coordination of n AlO = 4.43(8), while Yb–O environments mostly range from 5- to 8-coordinate, with n YbO = 6.26(8). The cation–oxygen polyhedra are connected primarily by corner-sharing, with edge-sharing constituting up to ~1/3 of the connectivity among polyhedra with Yb or higher-coordinated Al–O. Structurally, the –Al–O– network in molten Yb 3 Al 5 O 12 appears conducive to glass formation: n OAl = 1.85(3), there are 1.86 AlO x –AlO x connections per Al atom (e.g., a mixture of Q 3 and Q 4 units), and the modal ring size is six cations. These characterize a network that is somewhat less constrained compared to SiO 2 glass, yet Yb 3 Al 5 O 12 cannot be quenched into crystal-free glass. Here, aluminum garnet compositions with larger rare earth cations do form glass, so these characterizations help reveal the structural characteristics corresponding to the limit of glass forming ability in rare earth aluminates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Direct Feed High-Level Waste APPS Model Glass Testing (DFHLW APPS) Matrix, Phase 2

This report summarizes the data collected during the batching and melting of a second matrix of Direct Feed High-Level Waste (DFHLW) glasses generated using the preliminary enhanced waste glass models (EWG2.5) and the Britton and Anderson (2024) preliminary DFHLW feed vector. The purpose of these glasses is two-fold: 1. Validate EWG2.5 glass calculations being used in the Aspen Process Performance Simulation (APPS) model. 2. Evaluate and ultimately improve the glass property models and formulation methods used for design of DFHLW glasses as part of an iterative process of data collection and model refinement. Some of the 16 APPS2 glasses tested did not satisfy all target property constraints due to the limited data on DFHLW glass supporting the EWG2.5 models. • One glass, APPS2-10, formed nepheline on canister centerline cooling (CCC) heat-treatment and failed the product consistency test (PCT) response limits. This glass also had high B and Cr release rates for the toxicity characteristic leaching procedure (TCLP). All other glasses were found to satisfy the PCT and TCLP constraints for both quenched and CCC samples. • One glass, APPS2-08, had higher than acceptable viscosity due to magnetite crystallization. • One glass, APPS2-09, formed greater than 2 vol% crystals at 950 °C. As the glass design criterion was that the temperature at 2 vol% crystal (T 2% ) be less than 950 °C, only one glass failed the criteria. However, this criterion is being reevaluated. Four additional glasses formed crystal fractions between 1 and 2 vol% at 950 °C (APPS2-03, -08, -12, and -14). • Four glasses – APPS2-01, -02, -04, and -16 – failed the Monofrax K-3 refractory neck corrosion (k neck ) design limit of 0.04 in. at 1208 °C for 6 d. This is another criterion being reevaluated. Four additional glasses (APPS2-05, -06, -11, and -13) exhibited 0.025 = k neck = 0.04 in. • All 16 glasses passed the sulfur solubility and TCLP constraints. The measured property values were compared to predicted values using EWG2.5 and a selection of other existing models. A few models (e.g., electrical conductivity, TCLP) were found to be adequate for designing DFHLW glasses in the near future, while others require refits or offsets. It is recommended that new property models be developed for EWG3.0, as a large amount of DFHLW glass property data (> 14 × existing data) is expected to be collected in the compositional spaces where no data was previously available. To enable near-term calculations and formulations for designing DFHLW glasses and processing rate estimations, a formulation algorithm with minor modifications will be developed, EWG2.6.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Impact of Hydroxyl Functionalization and Unsaturation on Linear Poly(ethylene- co -vinyl alcohol)

Functionalization of C═C in unsaturated polyolefins by hydroboration/oxidation successfully generates linear poly(ethylene-co-vinyl alcohol) (LEVOH) polymers. This postpolymerization modification expands upon previously reported chemistry to control the extent of functionalization through reagent stoichiometry. Partial functionalization (24–92% of C═C) of polycyclooctene produces materials with both C═C in the backbone and pendant OH and subsequent hydrogenation generate a LEVOH. We explore the thermal, structural, surface, and adhesive properties of these LEVOH and the partially unsaturated intermediate and find they are impacted by both the extent of OH incorporation and saturation. The presence of C═C significantly reduces the melting temperature and crystallinity while increasing surface polarity and adhesive strength compared with saturated polymers at equivalent functionalization. Furthermore, this investigation demonstrates linear analogs of EVOH with a wide range of properties tuned by extent of hydroxylation and presence of unsaturation.

Crystal structure↗
DOE OSTI2025

Biochemical properties of glycerol kinase from the hypersaline-adapted archaeon Haloferax volcanii

ABSTRACT Extremophilic microorganisms are promising candidates for industrial and analytical biocatalysis.Haloferax volcanii, a halophilic archaeon that prefers glycerol over glucose, channels this substrate into central metabolism through glycerol kinase (GK). Here, we report the biochemical properties ofH. volcaniiGK and its potential for biotechnological applications. An N-terminal His-tagged GK was functionalin vivoand yielded 3 mg/L culture—4.5 times more enzyme than a C-terminal StrepII-tagged version. Size exclusion chromatography revealed a glycerol-induced oligomeric shift from homodimer to a dimer-dominant state with detectable tetramer. The purified enzyme showed robust activity across broad pH and salinity ranges, with optimal activity at 100 mM NaCl and 50°C–60°C. It retained catalytic activity in 5%–10% dimethyl sulfoxide (DMSO) and crude glycerol containing methanol. His-GK was freeze-thaw stable and thermotolerant in 2 M NaCl buffers. In the absence of ligands, the enzyme’s melting temperature (T m ) was 80°C. Glycerol increased the T m to 85°C, and combinations with MgCl₂ (84°C) or ATP (88°C) provided further stabilization. The highest T m (89°C) occurred with all three ligands, suggesting a cumulative stabilizing effect. Kinetic analyses revealed positive cooperativity for glycerol, ATP, and Mg² + ; Mn² + and Co² + also supported the activity.H. volcaniiGK is the first known GK to exhibit positive cooperativity with glycerol and ATP. Its high stability and substrate flexibility support its use in biodiesel waste valorization,in vitrobiocatalysis, and biosensor development—applications demanding robust, specific, and stable enzymes. IMPORTANCE This study reveals thatH. volcaniiGK exhibits positive cooperativity for glycerol, ATP, and Mg² + , a kinetic feature not previously reported for glycerol kinases. This behavior enables steep, switch-like responses to small substrate changes, offering unique advantages for biosensor design. Importantly,H. volcaniiGK also maintains high activity under extreme salinity, temperature, broad pH, and solvent conditions that typically limit enzyme use in industrial and environmental applications. These traits make this GK an ideal candidate for enzyme-based biosensors, which often suffer from poor tolerance to pH, solvent, and thermal stress. Its robustness supports its use in cross-linked enzyme crystals, an immobilization method that enhances enzyme stability and reusability under harsh conditions. Moreover, GKs are already employed in Mg² + detection kits; however,H. volcaniiGK’s ability to tolerate and respond to diverse divalent cations (e.g., Co² + , Mn² + ) broadens their potential for pollutant detection and environmental monitoring. These features collectively positionH. volcaniiGK as a valuable biocatalyst for biosensing,in vitrodiagnostics, and biotechnological applications requiring both precision and durability.

Biotechnology & Applied Microbiology↗
DOE OSTI2026

Epitaxy of Beta-Ga2O3 on Highly-Offcut (Greater than 10 Degrees) Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction.1 These films show step-flow growth from (-201) step-edges and high electron mobility. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (4.8 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe 100% reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Stoichiometry dependent properties of cerium hydride: An active learning developed interatomic potential study

Cerium hydride has a variety of interesting properties, including a known lattice contraction and densification with increasing hydrogen content. However, precise stoichiometric control is not experimentally straightforward and ab initio approaches are not computationally feasible for many properties such as melting and low temperature diffusion. Therefore, we develop a machine-learned interatomic potential for cerium hydride that is valid for H to Ce ratios from 2.0 to 3.0. A query-by-committee active learning approach is used to develop the training set. Leveraging classical molecular dynamics simulations, we assess a range of properties and provide fundamental mechanisms for the trends with stoichiometry. Finally, a majority of the properties follow the trend of lattice contraction, being governed by the stronger lattice binding induced by adding octahedral atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Growth of Hexagonal Boron Nitride from Molten Nickel Solutions: A Reactive Molecular Dynamics Study

Metal flux methods are excellent for synthesizing high-quality hexagonal boron nitride (hBN) crystals, but the atomic mechanisms of hBN nucleation and growth in these systems are poorly understood and difficult to probe experimentally. Here, we harness classical reactive molecular dynamics (ReaxFF) to unravel the mechanisms of hBN synthesis from liquid nickel solvent over time scales up to 30 ns. These simulations mimic experimental conditions by including relatively large liquid nickel slabs containing dissolved boron and a molecular nitrogen gas phase. Overall, the reaction takes place almost exclusively on the surface of the liquid nickel, owing to the low solubility of nitrogen in bulk nickel and the intermediate species’ preference for the metal–gas interface. The formation of hBN invariably begins by reaction of dinitrogen with nickel-solvated boron atoms at the surface, forming intermediate N–N–B species, which typically evolve into B–N–B units through a short-lived intermediate where a single nitrogen atom is coordinated by one nitrogen and two boron atoms. The resulting B–N–B units, in turn, coalesce with growing hBN nuclei and carry nitrogen between hBN nanocrystals in an Ostwald ripening process. The amount of hBN produced on the tens of nanosecond time scale depends critically on the boron concentration, while having a much weaker dependence on the N 2 pressure for the regime considered (N 2 pressures of 2.5–10 MPa, Ni–B solutions with 6–12% boron by atom fraction). The highest rate of hBN formation occurs at the lowest temperature considered (1750 K, just above the melting point of nickel), while no hBN sheets are formed at 2000 K or above. An analysis of the transition pathways for nitrogen atoms shows that the final step, incorporation of small B–N motifs into larger hBN sheets, is the rate-limiting step in the regimes considered. While raising the temperature from 1750 to 2000 K has little effect on the formation of intermediates (N–N–B, B–N–B, etc.), the lack of large hBN sheets at temperatures >1900 K is explained by decreased probability of the final step and increased probability of breakup of hBN into B–N motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Identifying Challenges in Safeguards for Metallic Fuel Fabrication Facilities

As new advanced reactors gain popularity, there is an increasing interest in metallic fuel fabrication for fast reactors. While metallic fuels themselves are not a new idea, as many of the first reactors employed metallic fuels, new designs, compositions, and fabrication methods are appearing throughout the nuclear community. As the interest grows and facilities are constructed, both domestic and international safeguards will need to be heavily involved to support safeguards-by-design (SBD) measures from the start. This work compiles a review of historical and modern fuel types and fabrication methods, fabrication processes, safeguards gaps, and potential safeguards solutions. Metallic nuclear fuel types have been around for many decades and were included in some of the first reactors including the Experimental Breeder Reactor (EBR)-I and -II, the Fermi 1 reactor, the Integral Fast Reactor (IFR), and the Dounreay Fast Reactor (DFR). These reactors used various compositions including pure uranium (U) metal, U-zirconium (Zr) alloys, plutonium (Pu)-aluminum (Al) alloys, U-fissium (Fs) alloys, U-Pu-Zr alloys, and U-molybdenum (Mo) alloys [1, 2, 3, 4, 5]. These small alloying additions are included to improve the material properties of the pure U metal. The alpha-phase U (stable below 661C) suffers elongation in one direction causing grain boundary cracking and increasing creep rate due to irradiation growth, thermal cycling, and preferential crystal orientation. It is ideal to utilize the gamma-phase U (typically stable above 769C) by adding small amounts of alloying elements such as Zr or Mo to stabilize this phase down to room temperature [3]. Additionally, some research has been focused on U with transuranic (TRU) elements present, typically coming from the used fuel recycling process. Including these elements in fast reactor fuel can aid in the reduction of nuclear waste by burning minor long-lived actinides. However, the additions of TRU elements can cause concerns to arise when trying to fabrication or safeguard metallic fuels. A typical metallic fuel element is shown in Figure 1. Sodium is added into the cladding to create a thermal bond between the fuel slug and cladding wall. The fuel slug is then inserted and the end plug is welded on to the top of the fuel element. A gas plenum is left to create a headspace for gaseous fission products to escape rather than continue to build in the fuel itself [1, 5]. Other fuel element geometries exist as well, such as the Lightbridge twisted cruciform geometry shown in Figure 2 [6]. This design allows for better cooling performance and provides room for fuel rod swelling without impacting the fuel rod diameter. There are many different fabrication methods for metallic fuels, which is one of the many benefits of these fuel types. Many of these fabrication methods are relatively easy and cost-efficient. The most popular fabrication method is injection casting, sometimes called vacuum induction melting (VIM), shown in Figure 3 [4, 8, 9, 7, 10]. This method was largely used for EBR-II fuel fabrication. The injection casting system is contained inside of a vessel consisting of a Y2O3-coated graphite crucible surrounded by an induction coil with ZrO2-coated quartz molds suspended above the crucible. The fuel feedstock is placed inside of the graphite crucible and melted using the induction furnace. The induction furnace utilizes a dual frequency with the high frequency melting the feedstock and the low frequency causing stirring of the melted feedstock to form a homogeneous mixture. The mixture is heated to approximately 1600C in an argon environment. The vessel is evacuated and then the quartz molds are lowered into the graphite crucible containing the molten metal and the vessel is repressurized to inject the metal fuel upwards into the molds. The molds are removed and then shattered to release the fuel slugs. This fabrication method was used to fabricate 39,000 metallic fuel pins for EBR-II. While injection casting has been the most common metallic fuel fabrication method throughout the decades, many other methods have been explored including low-pressure gravity casting, microwave casting, continuous casting, centrifugal casting, coextrusion, and many others [11, 12, 8, 13, 14, 15]. Some of these methods aim to mitigate challenges that arise with americium (Am) volatilization during the casting process for TRU-containing fuel feedstocks, an issue with injection casting. Coextrusion is one of the methods explored at the Idaho National Laboratory (INL) and has been utilized for the initial fabrication tests of Lightbridge's unique fuels, as well as other metallic fuels with cladding coextruded. In this process, large billets are formed and machined and then inserted into a molten salt bath for approximately 30 minutes. The billets are then loaded into the extrusion press and extruded. This process can be seen in Figure 4 [15].

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Fast Growth of Ga2O3 on Highly Offcut (100)-Oriented Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. More importantly, the impact ionization coefficients along the [100] direction are low, leading to the highest possible critical fields. This is advantageous compared to the current state of the art, (001), due to reduced surface defects and increased possible breakdown voltage. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption, and on-axis (100) growth easily forms twin domains. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction. These films show step-flow growth from (20-1) step-edges and high electron mobility due to suppressed twins. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (>5 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3 and critical breakdown field in Schottky barrier diodes comparable with state-of-the-art (001) Ga2O3 without edge termination.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Co 3 Ga 2 Ge 5 : Probing site mixing of the Ru 3 Sn 7 structure type with elements difficult to distinguish by diffraction

Co 3 Ga 2 Ge 5 was synthesized through arc-melting stoichiometric ratios of the elements, and a Ru 3 Sn 7 -type structure was confirmed by X-ray diffraction. Because Co 3 Ga 2 Ge 5 contains Ga and Ge, which have very similar X-ray and neutron scattering factors, any Ga/Ge crystallographic site preference cannot be determined with diffraction alone. The purpose of this study is to highlight the importance of using multiple techniques to characterize otherwise structurally ambiguous intermetallic compounds. Here, we utilize 71 Ga nuclear magnetic resonance spectroscopy and an analysis of the X-ray absorption fine structure to clarify the amount of Ga/Ge site mixing. Our combined use of X-ray diffraction and spectroscopy provides a comprehensive structural analysis of Ga site mixing across the Ge crystallographic sites, enhancing the understanding of the structure and properties of Co 3 Ga 2 Ge 5 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Molecular dynamics simulations of uranyl and plutonyl cations in a task-specific ionic liquid

Ionic liquids (ILs) are a unique class of solvents with potential applications in advanced separation technologies relevant to the nuclear industry. ILs are salts with low melting points and a wide range of tunable physical properties, such as viscosity, hydrophobiciy, conductivity, and liquidus range. ILs have negligible vapor pressure, are often non-flammable, and can have high thermal stability and a wide electrochemical window, making them attractive for use in separations processes relevant to the nuclear industry. Metal salts generally have a low solubility in ILs; however, by incorporating new functional groups into the IL cation or anion that promote complexation with the metal, the solubility can be greatly increased. One such task-specific ionic liquid (TSIL) is 1-carboxy-N, N, N-trimethylglycine bis(trifluoromethylsulfonyl)imide ([Hbet][Tf 2 N]). Water, which is detrimental for electrochemical separations, is a common impurity in ILs and can coordinate with actinyl cations, particularly in ILs containing only weakly coordinating components. Understanding the behavior of actinides in TSIL/water mixtures on a molecular level is vital for designing improved separations processes. Classical molecular dynamics simulations of uranyl(VI) and plutonyl(VI) in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf 2 N]) with deprotonated Hbet (betaine) and water have been performed to understand the coordination and dynamics of the actinyl cations. We find that betaine is a much stronger ligand than water and prefers to coordinate the metal in a bidentate manner. Potential of mean force simulations yield a relative free energy for betaine coordination of approximately -120 to -90 kJ/mol in mixtures with water. As the amount of betaine coordinated to the actinide increases, the diffusion coefficient of the actinyl cation decreases. Moreover, the betaine ligand is able to bridge between two metal centers, resulting in dimeric complexes with actinide–actinide distances of ~5 Å. Potential of mean force simulations show that these structures are stable, with relative free energies of up to -40 kJ/mol. The crystal structure for [(UO 2 ) 2 (bet) 6 (H 2 O) 2 ][Tf 2 N] 4 shows that the betaine bridges between two uranium atoms to form dimeric complexes similar to those found in our simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystallographic Snapshots of Pre- and Post-Lanthanide Halide Hydrolysis─Reaction Products Captured by the 4-Amino-1,2,4-triazole Ligand

Reactions of lanthanide(III) chloride salts with 4-amino-1,2,4-triazole (4-NH 2 -1,2,4-Triaz) in azole melts have led to the isolation of both hydrolysis and non-hydrolysis products in the same synthesis with the inclusion of a variety of ligands, anions, and water, allowing us to capture crystallographic snapshots of different forms and intermediate hydrolysis fragments. The structural studies reported here include anhydrous and hydrated nonhydrolyzed complexes which were isolated alongside hydrolysis products giving oxide/hydroxide lanthanide(III) dimers, tetramers, and ultimately hexamers. The compounds isolated include [Nd 2 Cl 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 (4-NH 2 -1,2,4-Triaz) 2 ], [Ce 2 Cl 4 (μ 2 -Cl) 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 ] n , [Ce 2 (µ 2 -Cl) 4 (µ 2 -OH) 2 (µ 2 -4-NH 2 -1,2,4-Triaz) 2 ] n , [Ln 4 Cl 4 (µ 2 -Cl) 4 (µ 3 -OH) 4 (µ 2 -4-NH 2 -1,2,4-Triaz) 4 ] n •2nH 2 O (Ln = Ce, Nd), and [Ce 6 Cl 6 (µ 6 -O 0.5 )(µ 3 -Cl 0.5 ) 4 (µ 3 -Cl 0.75 ) 3 (µ 3 -OH) 0.75 (µ 2 -4-NH 2 -1,2,4-Triaz) 12 ((OH 2 ) 0.25 ) 2 ] 2 [CeCl 6 ][Cl 9 ]•xH 2 O. In all complexes all lanthanide atoms are pairwise connected via one or more 4-NH2-1,2,4-Triaz ligands and sometimes additional Cl - anions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗